Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

5505VX Ball Nose End Mills • Stellram

Selecionar filtros
Filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (44)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (44)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (44)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (44)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (44)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (44)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (44)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (44)
  • M Stainless Steel (44)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (44)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (44)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (44)
  • S High-Temp Alloys (44)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (44)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (44)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (44)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (44)
Applications
Applications
  • Face Milling Face Milling (36)
  • Profile Milling Profile Milling (36)
  • Ramping Ramping (36)
  • Shoulder Ball Nose Shoulder Ball Nose (36)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (36)
  • Shoulder Milling Shoulder Milling (36)
  • Shoulder Roughing Shoulder Roughing (36)
  • Slot Ball Nose Slot Ball Nose (36)
  • Slot Milling Slot Milling (36)
  • Slot Side Slot Side (36)
Cutting Diameter
Cutting Diameter
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.748 in (1)
  • 0.75 in (3)
  • 0.787 in (3)
  • 0.984 in (5)
  • 1.0 in (3)
  • 1.25 in (4)
  • 1.26 in (4)
  • 1.5 in (2)
  • 1.575 in (2)
  • 1.969 in (2)
  • 2.0 in (2)
Cutting Diameter Min a Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.0 mm (1)
  • 19.05 mm (3)
  • 20.0 mm (3)
  • 25.0 mm (5)
  • 25.401 mm (3)
  • 31.75 mm (4)
  • 32.0 mm (4)
  • 38.1 mm (2)
  • 40.0 mm (2)
  • 50.0 mm (2)
  • 50.801 mm (2)
Cutting Diameter Min a Cutting Diameter Max
Cutting Length
Cutting Length
  • 16.0 mm (5)
  • 16.6 mm (1)
  • 19.05 mm (3)
  • 20.0 mm (2)
  • 20.3 mm (1)
  • 25.0 mm (8)
  • 32.0 mm (8)
  • 38.1 mm (2)
  • 40.0 mm (2)
  • 50.801 mm (1)
  • 51.0 mm (3)
Cutting Length Min a Cutting Length Max
Cutting Length
Cutting Length
  • 0.63 in (5)
  • 0.654 in (1)
  • 0.75 in (3)
  • 0.787 in (2)
  • 0.799 in (1)
  • 0.984 in (8)
  • 1.26 in (8)
  • 1.5 in (2)
  • 1.575 in (2)
  • 2.0 in (1)
  • 2.008 in (3)
Cutting Length Min a Cutting Length Max
Reach
Reach
  • 0.984 in (1)
  • 1.0 in (1)
  • 1.181 in (2)
  • 1.282 in (1)
  • 1.379 in (3)
  • 1.575 in (5)
  • 1.969 in (2)
  • 2.0 in (1)
  • 2.165 in (1)
  • 2.346 in (1)
  • 2.369 in (1)
  • 2.559 in (4)
  • 2.717 in (1)
  • 2.961 in (1)
  • 3.0 in (1)
  • 3.938 in (3)
  • 3.996 in (1)
  • 4.0 in (2)
  • 5.906 in (2)
  • 5.996 in (1)
  • 6.08 in (1)
Reach Min a Reach Max
Reach
Reach
  • 25.0 mm (1)
  • 25.401 mm (1)
  • 30.0 mm (2)
  • 32.575 mm (1)
  • 35.0 mm (3)
  • 40.0 mm (5)
  • 50.0 mm (2)
  • 50.801 mm (1)
  • 55.0 mm (1)
  • 59.6 mm (1)
  • 60.176 mm (1)
  • 65.0 mm (4)
  • 69.0 mm (1)
  • 75.2 mm (1)
  • 76.2 mm (1)
  • 100.0 mm (3)
  • 101.5 mm (1)
  • 101.601 mm (2)
  • 150.0 mm (2)
  • 152.3 mm (1)
  • 154.425 mm (1)
Reach Min a Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (36)
Tool Cutting Edge Angle Min a Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Screw-On Connection (8)
  • Straight-Cylindrical (11)
  • Weldon (17)
Number of Flutes
Number of Flutes
  • 2 (36)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.693 in (1)
  • 1.709 in (1)
  • 2.126 in (2)
  • 2.441 in (2)
  • 2.874 in (2)
  • 4.173 in (1)
  • 4.279 in (1)
  • 4.567 in (1)
  • 4.65 in (1)
  • 5.0 in (1)
  • 5.281 in (1)
  • 5.323 in (1)
  • 5.5 in (1)
  • 5.906 in (1)
  • 6.281 in (1)
  • 6.299 in (1)
  • 6.686 in (1)
  • 6.687 in (1)
  • 6.694 in (2)
  • 7.0 in (1)
  • 7.087 in (1)
  • 7.875 in (1)
  • 8.0 in (1)
  • 8.661 in (1)
  • 8.685 in (1)
  • 9.055 in (1)
  • 9.329 in (1)
  • 9.843 in (3)
  • 10.0 in (1)
  • 10.079 in (1)
Over All Length [L] Min a Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 43.0 mm (1)
  • 43.401 mm (1)
  • 54.0 mm (2)
  • 62.0 mm (2)
  • 73.0 mm (2)
  • 106.0 mm (1)
  • 108.65 mm (1)
  • 116.0 mm (1)
  • 118.101 mm (1)
  • 127.0 mm (1)
  • 134.125 mm (1)
  • 135.201 mm (1)
  • 139.701 mm (1)
  • 150.0 mm (1)
  • 159.525 mm (1)
  • 160.0 mm (1)
  • 169.8 mm (1)
  • 169.851 mm (1)
  • 170.0 mm (2)
  • 177.8 mm (1)
  • 180.0 mm (1)
  • 200.0 mm (1)
  • 203.201 mm (1)
  • 220.0 mm (1)
  • 220.576 mm (1)
  • 230.0 mm (1)
  • 236.951 mm (1)
  • 250.0 mm (3)
  • 254.0 mm (1)
  • 256.0 mm (1)
Over All Length [L] Min a Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.312 in (6)
  • 0.375 in (5)
  • 0.392 in (4)
  • 0.492 in (9)
  • 0.625 in (9)
  • 0.768 in (3)
  • 0.787 in (3)
  • 1.0 in (5)
Corner Radius Min a Corner Radius Max
Corner Radius
Corner Radius
  • 7.926 mm (6)
  • 9.525 mm (5)
  • 9.951 mm (4)
  • 12.5 mm (9)
  • 15.875 mm (9)
  • 19.5 mm (3)
  • 20.0 mm (3)
  • 25.401 mm (5)
Corner Radius Min a Corner Radius Max
application
Hand Of Tool
Hand Of Tool
  • R (36)
Wiper Insert
Wiper Insert
  • N (8)
Maximum Ramp Angle
Maximum Ramp Angle
  • 85.0 (36)
Maximum Ramp Angle Min a Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 0.551 in (1)
  • 0.568 in (2)
  • 0.69 in (1)
  • 0.709 in (1)
  • 0.719 in (1)
  • 0.728 in (1)
  • 0.732 in (1)
  • 0.88 in (4)
  • 0.897 in (1)
  • 0.929 in (1)
  • 1.114 in (6)
  • 1.407 in (2)
  • 1.449 in (2)
  • 1.504 in (1)
  • 1.874 in (3)
Neck Diameter Min a Neck Diameter Max
Neck Diameter
Neck Diameter
  • 14.0 mm (1)
  • 14.4 mm (2)
  • 17.5 mm (1)
  • 18.0 mm (1)
  • 18.25 mm (1)
  • 18.5 mm (1)
  • 18.6 mm (1)
  • 22.35 mm (4)
  • 22.776 mm (1)
  • 23.6 mm (1)
  • 28.3 mm (6)
  • 35.7 mm (2)
  • 36.801 mm (2)
  • 38.176 mm (1)
  • 47.6 mm (3)
Neck Diameter Min a Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Insert IC Size
Insert IC Size
  • 7.4 mm (1)
  • 8.525 mm (1)
  • 9.0 mm (1)
  • 11.0 mm (1)
  • 14.101 mm (1)
  • 17.0 mm (1)
  • 18.0 mm (1)
  • 22.25 mm (1)
Insert IC Size Min a Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.291 in (1)
  • 0.336 in (1)
  • 0.354 in (1)
  • 0.433 in (1)
  • 0.555 in (1)
  • 0.669 in (1)
  • 0.709 in (1)
  • 0.876 in (1)
Insert IC Size Min a Insert IC Size Max
Cutting Tool Material
Cutting Tool Material
  • H W (8)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (28)
  • SCREW-ON (8)
Back-End Diameter
Back-End Diameter
  • 13.0 mm (2)
  • 15.875 mm (1)
  • 18.0 mm (2)
  • 19.05 mm (2)
  • 20.0 mm (1)
  • 21.0 mm (2)
  • 25.0 mm (4)
  • 25.401 mm (4)
  • 29.0 mm (2)
  • 31.75 mm (3)
  • 32.0 mm (5)
  • 38.1 mm (3)
  • 40.0 mm (3)
  • 50.0 mm (1)
  • 50.801 mm (1)
Back-End Diameter Min a Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.512 in (2)
  • 0.625 in (1)
  • 0.709 in (2)
  • 0.75 in (2)
  • 0.787 in (1)
  • 0.828 in (2)
  • 0.984 in (4)
  • 1.0 in (4)
  • 1.143 in (2)
  • 1.25 in (3)
  • 1.26 in (5)
  • 1.5 in (3)
  • 1.575 in (3)
  • 1.969 in (1)
  • 2.0 in (1)
Back-End Diameter Min a Back-End Diameter Max
No filters matching ""

5505VX Weldon End Mills • Stellram • Métrico

(7) 5505VX Weldon End Mills • Stellram • Métrico

5505VX Cylindrical End Mills • Stellram • Métrico

(5) 5505VX Cylindrical End Mills • Stellram • Métrico

5505VX Weldon End Mills • Stellram • Inch

(7) 5505VX Weldon End Mills • Stellram • Inch

5505VX Cylindrical End Mills • Stellram • Inch

(6) 5505VX Cylindrical End Mills • Stellram • Inch

5505VX Modular Head Screw-On End Mills • Stellram • Inch

(4) 5505VX Modular Head Screw-On End Mills • Stellram • Inch

5505VX Modular Head Screw-On End Mills • Stellram • Métrico

(4) 5505VX Modular Head Screw-On End Mills • Stellram • Métrico

5505VX Weldon End Mills Flat • Stellram • Métrico

(2) 5505VX Weldon End Mills Flat • Stellram • Métrico

5505VX Weldon End Mills Flat • Stellram • Inch

(1) 5505VX Weldon End Mills Flat • Stellram • Inch

XPNT-F • Stellram

(8) XPNT-F • Stellram
Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
product-image
Please adjust the following properties from

Código de catálogo ISO

Número do catálogo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

 

Can’t find the file type you’re looking for?

Você deve ser registrado para ver as informações do seu painel
Session expired due to inactivity, please login again
Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
itens adicionados com sucesso ao carrinho
Ver o carrinho

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Código de catálogo ISO Classe    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Obrigado pelo seu registro bem-sucedido. Agora você tem acesso imediato para fazer login e pode utilizar o site.

You are about to leave the Solution building process.

Are you sure you want to leave?