Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

TM41

Selecionar filtros
Filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (41)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(41)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(41)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(41)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(41)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(41)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(41)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(41)
    • M Stainless Steel (41)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(41)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(41)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(41)
    • K Cast Iron (41)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(41)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(41)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(41)
    • S High-Temp Alloys (28)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(28)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(28)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(28)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(28)
    • H Hardened Materials (28)
      • H1
        Hardened Materials 44-48 HRC(28)
    Applications
    Applications
    • ID Thread TurningID Thread Turning (28)
    • OD Thread TurningOD Thread Turning (2)
    • Thread MillingThread Milling (15)
    • ThreadingThreading (15)
    Cutting Diameter
    Cutting Diameter
    • 0.835 in(2)
    • 0.965 in(1)
    • 0.969 in(1)
    • 1.181 in(3)
    • 1.417 in(2)
    • 1.421 in(2)
    • 1.891 in(1)
    • 2.091 in(1)
    • 2.283 in(1)
    • 2.48 in(1)
    Cutting Diameter MinaCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 21.201 mm(2)
    • 24.5 mm(1)
    • 24.6 mm(1)
    • 30.0 mm(3)
    • 36.0 mm(2)
    • 36.1 mm(2)
    • 48.0 mm(1)
    • 53.1 mm(1)
    • 58.0 mm(1)
    • 63.0 mm(1)
    Cutting Diameter MinaCutting Diameter Max
    Type of Thread
    Type of Thread
    • M (29)
    • NPT (2)
    • UN (27)
    Reach
    Reach
    • 1.689 in(2)
    • 1.693 in(3)
    • 1.772 in(2)
    • 1.969 in(2)
    • 2.0 in(2)
    • 2.559 in(4)
    Reach MinaReach Max
    Reach
    Reach
    • 42.901 mm(2)
    • 43.0 mm(3)
    • 45.0 mm(2)
    • 50.0 mm(2)
    • 50.801 mm(2)
    • 65.0 mm(4)
    Reach MinaReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (15)
    Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (4)
    • Weldon (11)
    Number of Flutes
    Number of Flutes
    • 1 (2)
    • 2 (2)
    • 3 (3)
    • 4 (2)
    • 5 (4)
    • 6 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (2)
    • 2.0 (41)
    Cutting Edges Per Insert MinaCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.969 in(2)
    • 2.0 in(2)
    • 4.094 in(1)
    • 4.13 in(3)
    • 4.134 in(1)
    • 4.173 in(1)
    • 4.194 in(1)
    • 4.98 in(1)
    • 5.0 in(1)
    • 5.039 in(1)
    • 5.059 in(1)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 50.0 mm(2)
    • 50.801 mm(2)
    • 104.0 mm(1)
    • 104.9 mm(3)
    • 105.0 mm(1)
    • 106.0 mm(1)
    • 106.5 mm(1)
    • 126.5 mm(1)
    • 127.0 mm(1)
    • 128.0 mm(1)
    • 128.5 mm(1)
    Over All Length [L] MinaOver All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC610M (29)
    • KC635M (29)
    Hand Of Tool
    Hand Of Tool
    • R (15)
    Wiper Insert
    Wiper Insert
    • N (28)
    frontEnd
    Cutting Width
    Cutting Width
    • 1.401 in(2)
    • 1.417 in(2)
    • 1.5 in(8)
    • 1.516 in(4)
    • 1.536 in(2)
    • 1.555 in(2)
    • 1.571 in(2)
    • 1.575 in(4)
    • 1.594 in(2)
    Cutting Width MinaCutting Width Max
    Cutting Width
    Cutting Width
    • 35.551 mm(2)
    • 36.0 mm(2)
    • 38.1 mm(8)
    • 38.5 mm(4)
    • 39.0 mm(2)
    • 39.5 mm(2)
    • 39.901 mm(2)
    • 40.0 mm(4)
    • 40.5 mm(2)
    Cutting Width MinaCutting Width Max
    Thread TPI
    Thread TPI
    • 4.0 (17)
    • 4.5 (17)
    • 5.0 (17)
    • 6.0 (17)
    • 7.0 (17)
    • 8.0 (19)
    Thread TPI MinaThread TPI Max
    Thread Pitch
    Thread Pitch
    • 3.0 mm(17)
    • 3.5 mm(17)
    • 4.0 mm(17)
    • 4.5 mm(17)
    • 5.0 mm(17)
    • 5.5 mm(17)
    • 6.0 mm(17)
    Thread Pitch MinaThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.119 in(17)
    • 0.138 in(17)
    • 0.157 in(17)
    • 0.177 in(17)
    • 0.197 in(17)
    • 0.217 in(17)
    • 0.237 in(17)
    Thread Pitch MinaThread Pitch Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • TM-RECTANGLE THREAD MILL 90 (28)
    Cutting Tool Material
    Cutting Tool Material
    • H W (28)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (11)
    • SHELL MILL (4)
    Back-End Diameter
    Back-End Diameter
    • 19.0 mm(1)
    • 22.0 mm(1)
    • 25.0 mm(2)
    • 25.401 mm(3)
    • 27.0 mm(1)
    • 31.8 mm(3)
    • 32.0 mm(4)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.748 in(1)
    • 0.866 in(1)
    • 0.984 in(2)
    • 1.0 in(3)
    • 1.063 in(1)
    • 1.252 in(3)
    • 1.26 in(4)
    Back-End Diameter MinaBack-End Diameter Max
    No filters matching ""
    Insertos
    (28)

    Insertos

    Fresas paralelas
    (15)

    Fresas paralelas

    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Código de catálogo ISO Classe  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk