Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

Cabeças de mandrilar

Selecionar filtros
Filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (100)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(100)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(100)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(100)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(100)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(100)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(100)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(100)
    • M Stainless Steel (100)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(100)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(100)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(100)
    • K Cast Iron (102)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(102)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(100)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(100)
    • N Non-Ferrous Materials (102)
      • N1
        Wrought Aluminum (100)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(100)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(69)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (102)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (100)
      • N6
        Carbon, Graphite Composites, CFRP (100)
      • N7
        MMC's (95)
    • S High-Temp Alloys (102)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(102)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(102)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(102)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(102)
    • H Hardened Materials (99)
      • H1
        Hardened Materials 44-48 HRC(99)
      • H2
        Hardened Materials 48-55 HRC(99)
      • H3
        Hardened Materials 56-60 HRC(92)
      • H4
        Hardened Materials >60 HRC(71)
    • C CFRP Materials (100)
      • C1
        CFRP, CFRP / CFRP (100)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (95)
    Applications
    Applications
    • Multiple Direction CuttingMultiple Direction Cutting (93)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (102)
    • Lightly Interrupted Cut (102)
    • Smooth Cut (102)
    • Varying Depth of Cut (102)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (2)
    • 62.5 (1)
    • 75.0 (9)
    • 90.0 (11)
    • 93.0 (39)
    • 95.0 (40)
    Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (2)
    • 1.0 (69)
    • 2.0 (83)
    • 3.0 (12)
    • 4.0 (79)
    • 6.0 (12)
    • 8.0 (53)
    Cutting Edges Per Insert MinaCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.787 in(2)
    • 0.79 in(2)
    • 0.984 in(3)
    • 1.365 in(1)
    • 1.614 in(6)
    • 1.625 in(88)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 20.0 mm(2)
    • 20.076 mm(2)
    • 25.0 mm(3)
    • 34.676 mm(1)
    • 41.0 mm(6)
    • 41.276 mm(88)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(2)
    • 0.001 in(9)
    • 0.002 in(9)
    • 0.004 in(70)
    • 0.008 in(69)
    • 0.014 in(4)
    • 0.016 in(91)
    • 0.024 in(6)
    • 0.031 in(100)
    • -0.039 in(2)
    • 0.047 in(100)
    • 0.062 in(23)
    • 0.063 in(77)
    • 0.094 in(20)
    • 0.095 in(26)
    • 0.125 in(2)
    • 0.126 in(14)
    • 0.157 in(3)
    • 0.25 in(2)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(2)
    • 0.025 mm(9)
    • 0.05 mm(9)
    • 0.1 mm(70)
    • 0.2 mm(69)
    • 0.351 mm(4)
    • 0.4 mm(91)
    • 0.601 mm(6)
    • 0.8 mm(100)
    • -1.0 mm(2)
    • 1.201 mm(100)
    • 1.576 mm(23)
    • 1.6 mm(77)
    • 2.375 mm(20)
    • 2.401 mm(26)
    • 3.176 mm(2)
    • 3.2 mm(14)
    • 4.0 mm(3)
    • 6.351 mm(2)
    Corner Radius MinaCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (71)
    • 241 (23)
    • AC5 (1)
    • CG4 (1)
    • CL4 (42)
    • CM2 (68)
    • CM3 (45)
    • CM4 (39)
    • CM5 (1)
    • CPX (64)
    • CW2 (30)
    • GH1 (7)
    • GX (38)
    • HT2 (41)
    • HTX (36)
    • K060 (41)
    • K090 (80)
    • K1 (35)
    • K1010P (7)
    • K10M (88)
    • K10P (78)
    • K10U (74)
    • K11 (3)
    • K15U (74)
    • K20K (88)
    • K21 (43)
    • K25M (75)
    • K25P (70)
    • K2885 (1)
    • K313 (100)
    • K35P (41)
    • K420 (70)
    • K45 (52)
    • K6 (1)
    • K68 (91)
    • KB1340 (32)
    • KB1345 (48)
    • KB1610 (65)
    • KB1625 (57)
    • KB1630 (51)
    • KB5610 (58)
    • KB5625 (59)
    • KB5630 (52)
    • KB9610 (70)
    • KB9640 (38)
    • KBH10 (68)
    • KBH10B (50)
    • KBH20 (70)
    • KBH20B (50)
    • KBK35 (25)
    • KC210 (53)
    • KC250 (58)
    • KC5010 (100)
    • KC5020P (7)
    • KC5025 (99)
    • KC5410 (90)
    • KC5510 (84)
    • KC5525 (51)
    • KC710 (24)
    • KC720 (85)
    • KC722 (23)
    • KC730 (96)
    • KC7310 (89)
    • KC732 (82)
    • KC740 (1)
    • KC8050 (100)
    • KC810 (99)
    • KC850 (101)
    • KC9010 (94)
    • KC9025 (100)
    • KC910 (97)
    • KC9105 (92)
    • KC9110 (100)
    • KC9120 (98)
    • KC9125 (99)
    • KC9125RR (3)
    • KC9140 (88)
    • KC9145 (80)
    • KC9210 (4)
    • KC9215 (84)
    • KC9225 (95)
    • KC9240 (95)
    • KC9240NEW (95)
    • KC9245 (84)
    • KC9315 (96)
    • KC9320 (99)
    • KC9325 (95)
    • KC935 (100)
    • KC950 (94)
    • KC990 (99)
    • KCD25 (23)
    • KCK05 (95)
    • KCK05B (93)
    • KCK15 (95)
    • KCK15B (96)
    • KCK20 (95)
    • KCK20B (95)
    • KCM15 (95)
    • KCM15B (91)
    • KCM25 (95)
    • KCM25B (95)
    • KCM25S (9)
    • KCM35 (91)
    • KCM35B (67)
    • KCP05 (86)
    • KCP05B (68)
    • KCP10 (99)
    • KCP10B (100)
    • KCP20S (9)
    • KCP25 (99)
    • KCP25B (100)
    • KCP25C (100)
    • KCP30 (99)
    • KCP30B (74)
    • KCP40 (74)
    • KCP40B (80)
    • KCPK05 (83)
    • KCS10 (34)
    • KCS10B (96)
    • KCS25S (9)
    • KCU10 (100)
    • KCU10B (100)
    • KCU25 (99)
    • KCU25B (99)
    • KD050 (55)
    • KD081 (54)
    • KD100 (49)
    • KD120 (57)
    • KD1400 (62)
    • KD1405 (45)
    • KD1425 (63)
    • KD200 (2)
    • KD230 (2)
    • KD240 (2)
    • KM1 (35)
    • KMF (24)
    • KN10S (9)
    • KS15 (23)
    • KT1120 (28)
    • KT125 (63)
    • KT150 (54)
    • KT175 (70)
    • KT315 (77)
    • KT325 (44)
    • KT5020 (12)
    • KTP10 (74)
    • KTP25S (65)
    • KU10 (9)
    • KU10T (77)
    • KU30T (99)
    • KY1310 (56)
    • KY1320 (76)
    • KY1540 (46)
    • KY1615 (77)
    • KY2000 (56)
    • KY2100 (37)
    • KY3000 (74)
    • KY3400 (70)
    • KY3500 (80)
    • KY4000 (45)
    • KY4300 (50)
    • KY4400 (79)
    • KYHK15B (81)
    • KYK10 (47)
    • KYK25 (67)
    • KYK35 (80)
    • KYS25 (43)
    • KYS30 (49)
    • MC2 (1)
    • NL200 (27)
    • NL250 (83)
    • NL300 (54)
    • NL400 (44)
    • NL920 (55)
    • P10 (1)
    • P20 (1)
    • P25 (29)
    • P2F (1)
    • PS5 (31)
    • SP0819 (56)
    • SP0A00 (1)
    • SP3019 (55)
    • SP4019 (62)
    • SP4036 (9)
    • SP4093 (9)
    • SP4200 (1)
    • SP61EJ (3)
    • SPADAP (9)
    • TN7035 (3)
    • TTX (1)
    • X00511 (23)
    • X00580 (23)
    • X00581 (23)
    • X00582 (23)
    • X00583 (23)
    • X00584 (23)
    • X00585 (23)
    • X00586 (23)
    • X00591 (23)
    • X00592 (23)
    • X00593 (23)
    • X00594 (23)
    • X00596 (23)
    • X00597 (23)
    • X00599 (23)
    • YY87EL (1)
    Hand Of Tool
    Hand Of Tool
    • L (34)
    • R (68)
    Wiper Insert
    Wiper Insert
    • N (102)
    • Y (62)
    F Dimension
    F Dimension
    • 16.25 mm(5)
    • 17.0 mm(2)
    • 19.05 mm(2)
    • 19.425 mm(6)
    • 21.875 mm(1)
    • 22.0 mm(4)
    • 22.6 mm(11)
    • 25.0 mm(1)
    • 25.401 mm(4)
    • 25.776 mm(4)
    • 27.0 mm(5)
    • 28.576 mm(7)
    • 31.75 mm(2)
    • 32.525 mm(13)
    • 33.65 mm(3)
    • 34.926 mm(4)
    • 35.0 mm(9)
    • 38.875 mm(11)
    • 38.901 mm(1)
    • 44.45 mm(7)
    F Dimension MinaF Dimension Max
    F Dimension
    F Dimension
    • 0.64 in(5)
    • 0.669 in(2)
    • 0.75 in(2)
    • 0.765 in(6)
    • 0.861 in(1)
    • 0.866 in(4)
    • 0.89 in(11)
    • 0.984 in(1)
    • 1.0 in(4)
    • 1.016 in(4)
    • 1.063 in(5)
    • 1.125 in(7)
    • 1.25 in(2)
    • 1.281 in(13)
    • 1.325 in(3)
    • 1.375 in(4)
    • 1.379 in(9)
    • 1.532 in(12)
    • 1.75 in(7)
    F Dimension MinaF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 30.475 mm(5)
    • 32.0 mm(2)
    • 33.025 mm(2)
    • 37.35 mm(6)
    • 40.0 mm(5)
    • 43.0 mm(1)
    • 43.301 mm(4)
    • 44.7 mm(11)
    • 50.0 mm(5)
    • 50.801 mm(7)
    • 51.051 mm(4)
    • 57.151 mm(2)
    • 60.95 mm(13)
    • 63.0 mm(9)
    • 63.5 mm(5)
    • 67.3 mm(2)
    • 76.95 mm(12)
    • 82.551 mm(7)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 1.2 in(5)
    • 1.26 in(2)
    • 1.3 in(2)
    • 1.47 in(6)
    • 1.575 in(5)
    • 1.693 in(1)
    • 1.705 in(4)
    • 1.76 in(11)
    • 1.969 in(5)
    • 2.0 in(7)
    • 2.011 in(4)
    • 2.25 in(2)
    • 2.4 in(13)
    • 2.48 in(9)
    • 2.5 in(5)
    • 2.65 in(2)
    • 3.031 in(12)
    • 3.25 in(7)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -0.039 in(2)
    Maximum Axial Groove Diameter MinaMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -1.0 mm(2)
    Maximum Axial Groove Diameter MinaMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (40)
    • E (60)
    • S (2)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (81)
    • NEGATIVE-ZERO (17)
    • NEUTRAL (ZERO) (1)
    • POSITIVE-NEGATIVE (3)
    Maximum Bore Depth
    Maximum Bore Depth
    • 3.938 in(2)
    • 4.0 in(7)
    • 4.992 in(1)
    • 5.0 in(9)
    • 5.039 in(6)
    • 6.0 in(18)
    • 6.299 in(5)
    • 7.0 in(6)
    • 7.875 in(9)
    • 8.0 in(20)
    • 10.0 in(19)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 100.0 mm(2)
    • 101.601 mm(7)
    • 126.801 mm(1)
    • 127.0 mm(9)
    • 128.0 mm(6)
    • 152.4 mm(18)
    • 160.0 mm(5)
    • 177.8 mm(6)
    • 200.0 mm(9)
    • 203.201 mm(20)
    • 254.0 mm(19)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    frontEnd
    Clamp Style
    Clamp Style
    • C (3)
    • M (80)
    • P (8)
    • S (11)
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (41)
    • D-DIAMOND/RHOMBIC 55 (27)
    • R-ROUND (2)
    • S-SQUARE 90 (6)
    • T-TRIANGLE 60 (6)
    • V-DIAMOND/RHOMBIC 35 (13)
    • W-TRIGON 80 (7)
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (79)
    • B L (73)
    • C A (86)
    • C N (84)
    • D P (71)
    • H T (82)
    • H W (102)
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 25.0 mm(2)
    • 25.401 mm(7)
    • 31.701 mm(1)
    • 31.75 mm(9)
    • 32.0 mm(6)
    • 38.1 mm(18)
    • 40.0 mm(5)
    • 44.45 mm(6)
    • 50.0 mm(9)
    • 50.801 mm(20)
    • 63.5 mm(19)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.984 in(2)
    • 1.0 in(7)
    • 1.248 in(1)
    • 1.25 in(9)
    • 1.26 in(6)
    • 1.5 in(18)
    • 1.575 in(5)
    • 1.75 in(6)
    • 1.969 in(9)
    • 2.0 in(20)
    • 2.5 in(19)
    Back-End Diameter MinaBack-End Diameter Max
    No filters matching ""

    Kenloc™ • Fixação de estilo M • Para insertos de estilo negativo

    (80)Kenloc™ • Fixação de estilo M • Para insertos de estilo negativo

    Screw-On • Fixação de estilo S • Para insertos de estilo positivo

    (11)Screw-On • Fixação de estilo S • Para insertos de estilo positivo

    Kenlever™ • Fixação de estilo P • Para insertos de estilo negativo

    (8)Kenlever™ • Fixação de estilo P • Para insertos de estilo negativo

    Kendex™ • Fixação de estilo C • Para insertos de estilo Kendex

    (3)Kendex™ • Fixação de estilo C • Para insertos de estilo Kendex
    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberCódigo de catálogo ISOClasse  

    You are about to leave the Solution building process.

    Are you sure you want to leave?