Ramping : Ébauche
Rainurage : Bout hémisphérique
Fraisage de côté/avec épaulement : Bout hémisphérique
Profilage 3D
Queue — Cylindrique Classique
Fraisage — Arrosage interne
Usinage de pochesDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 2877384 |
| Ref. ISO Catalogue | KDMT12R120A12HNC |
| Ref. ANSI Catalogue | KDMT12R120A12HNC |
| [D1] Diamètre effectif de coupe | 12 mm |
| [D1] Diamètre effectif de coupe | .472 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 12 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .4724 in |
| [D3] Diamètre de la partie cylindrique du corps | 10.5 mm |
| [D3] Diamètre de la partie cylindrique du corps | .413 in |
| [L] Longueur totale | 122 mm |
| [L] Longueur totale | 4.803 in |
| [L1] Longueur de référence | 122 mm |
| [L1] Longueur de référence | 4.803 in |
| [L2] Longueur de tête | 37 mm |
| [L2] Longueur de tête | 1.456 in |
| [AP1MAX] 1re profondeur de coupe maximale | 3 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .1181 in |
| Nombre de plaquettes | 1 |
| [Z] Nombre de goujures | 2 |
| Alimentation en arrosage | Y |
| Angle de ramping maximum | 3 |
| Poids en kilogrammes | 0.17 |
| T/Min max | 40000 |
| Plaquette étalon | KDM.12. |
Ramping : ÉbaucheRainurage : Bout hémisphériqueFraisage de côté/avec épaulement : Bout hémisphériqueProfilage 3DQueue — Cylindrique ClassiqueFraisage — Arrosage interneUsinage de pochesCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| – | (Hafif geometri) | – | (Sert geometri) | |||
| – | Aşınma direnci |  | Tokluk | |||
| – | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
| P1–P2 | .E..GC | KC515M | .E..GC | KC515M | .E..GN | KC515M |
| P3–P4 | .E..HC | KC505M | .E..GN | KC515M | .E..GN | KC515M |
| P5–P6 | .E..HC | KC505M | .E..GN | KC515M | .E..GN | KC515M |
| M1–M2 | – | – | .E..GC | KC515M | – | – |
| M3 | – | – | .E..GC | KC515M | – | – |
| K1–K2 | .E..GN | KC515M | .E..GN | KC515M | .E..GN | KC515M |
| K3 | .E..GN | KC515M | .E..GN | KC515M | .E..GN | KC515M |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | .E..GC | KC515M | – | – |
| H1 | .E..HC | KC505M | .E..HC | KC505M | .E..GN | KC515M |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..GC | 0,12 | 0,25 | 0,34 | 0,09 | 0,19 | 0,25 | 0,08 | 0,17 | 0,22 | 0,07 | 0,16 | 0,21 | 0,07 | 0,15 | 0,20 | .E..GC |
| .E..GN | 0,17 | 0,25 | 0,34 | 0,12 | 0,19 | 0,25 | 0,11 | 0,17 | 0,22 | 0,10 | 0,16 | 0,21 | 0,10 | 0,15 | 0,20 | .E..GN |
| .E..HC | 0,17 | 0,25 | 0,34 | 0,13 | 0,19 | 0,25 | 0,11 | 0,17 | 0,22 | 0,10 | 0,16 | 0,21 | 0,10 | 0,15 | 0,20 | .E..HC |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..GC | .007 | .010 | .014 | .005 | .008 | .010 | .004 | .007 | .009 | .004 | .006 | .008 | .004 | .006 | .008 | .E..GC |
| .E..GN | .007 | .010 | .014 | .005 | .008 | .010 | .004 | .007 | .009 | .004 | .006 | .008 | .004 | .006 | .008 | .E..GN |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .S..HF | .059 | .092 | .131 | .042 | .064 | .086 | .036 | .054 | .073 | .034 | .050 | .067 | .033 | .049 | .066 | .S..HF |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Malzeme grubu | K115M | KC505M | KC515M | |||||||
| P | 1 | – | – | – | – | – | – | 330 | 295 | 255 |
| 2 | – | – | – | – | – | – | 310 | 275 | 240 | |
| 3 | – | – | – | – | – | – | 275 | 240 | 200 | |
| 4 | – | – | – | 360 | 260 | 215 | 240 | 200 | 165 | |
| 5 | – | – | – | 360 | 260 | 215 | 200 | 165 | 130 | |
| 6 | – | – | – | 350 | 240 | 190 | 165 | 130 | 110 | |
| M | 1 | – | – | – | – | – | – | 330 | 275 | 240 |
| 2 | – | – | – | – | – | – | 275 | 220 | 165 | |
| 3 | – | – | – | – | – | – | 220 | 185 | 145 | |
| K | 1 | 220 | 185 | 145 | – | – | – | 440 | 330 | 220 |
| 2 | 185 | 145 | 110 | – | – | – | 330 | 255 | 185 | |
| 3 | 110 | 90 | 75 | – | – | – | 145 | 110 | 75 | |
| N | 1–2 | 440 | 330 | 220 | – | – | – | – | – | – |
| 3 | 295 | 220 | 185 | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | 260 | 205 | 170 | 170 | 120 | 95 |
| Malzeme grubu | KC515M | |||
| P | 1 | 1080 | 960 | 840 |
| 2 | 1020 | 900 | 780 | |
| 3 | 900 | 780 | 660 | |
| 4 | 780 | 660 | 540 | |
| 5 | 660 | 540 | 420 | |
| 6 | 540 | 420 | 360 | |
| M | 1 | 1080 | 900 | 780 |
| 2 | 900 | 720 | 540 | |
| 3 | 720 | 600 | 480 | |
| K | 1 | 1440 | 1080 | 720 |
| 2 | 1080 | 840 | 600 | |
| 3 | 480 | 360 | 240 | |
| N | 1–2 | – | – | – |
| 3 | – | – | – | |
| S | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | – | – | – | |
| H | 1 | 550 | 400 | 310 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?