Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.
Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (344)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(202)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(202)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(210)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(220)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(294)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(344)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(253)
    • M Stainless Steel (295)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(295)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(295)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(295)
    • K Cast Iron (200)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(200)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(200)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(200)
    • N Non-Ferrous Materials (78)
      • N1
        Wrought Aluminum (78)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(78)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(78)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (78)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (78)
      • N6
        Carbon, Graphite Composites, CFRP (33)
      • N7
        MMC's (33)
    • S High-Temp Alloys (328)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(328)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(319)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(328)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(319)
    • H Hardened Materials (323)
      • H1
        Hardened Materials 44-48 HRC(323)
      • H2
        Hardened Materials 48-55 HRC(266)
      • H3
        Hardened Materials 56-60 HRC(18)
      • H4
        Hardened Materials >60 HRC(8)
    Vybrat první volbu
    • DE (41)
    • GB (13)
    • IN (1)
    • SG (2)
    • US (17)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (12)
    • Concave Radius MillingConcave Radius Milling (13)
    • Face MillingFace Milling (204)
    • PocketPocket (325)
    • Pocket HelicalPocket Helical (308)
    • Pocket MillingPocket Milling (333)
    • Pocket Plunge MillingPocket Plunge Milling (86)
    • Profile MillingProfile Milling (46)
    • RampingRamping (250)
    • Shoulder Ball NoseShoulder Ball Nose (38)
    • Shoulder MillingShoulder Milling (347)
    • Shoulder RoughingShoulder Roughing (214)
    • Shoulder Square EndShoulder Square End (248)
    • Slot Ball NoseSlot Ball Nose (59)
    • Slot MillingSlot Milling (180)
    • Slot Square EndSlot Square End (152)
    • Trochoidal MillingTrochoidal Milling (10)
    Cutting Diameter
    Cutting Diameter
    • 0.02 in(12)
    • 0.135 in(1)
    • 0.157 in(1)
    • 0.237 in(1)
    • 0.255 in(1)
    • 0.26 in(1)
    • 0.276 in(1)
    • 0.315 in(2)
    • 0.375 in(35)
    • 0.38 in(1)
    • 0.382 in(1)
    • 0.393 in(1)
    • 0.394 in(32)
    • 0.44 in(1)
    • 0.461 in(1)
    • 0.473 in(34)
    • 0.5 in(45)
    • 0.618 in(1)
    • 0.625 in(38)
    • 0.629 in(3)
    • 0.63 in(43)
    • 0.75 in(38)
    • 0.776 in(1)
    • 0.787 in(40)
    • 0.984 in(28)
    • 1.0 in(36)
    • 1.25 in(10)
    • 1.26 in(14)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 0.5 mm(12)
    • 3.426 mm(1)
    • 4.0 mm(1)
    • 6.0 mm(1)
    • 6.476 mm(1)
    • 6.601 mm(1)
    • 7.0 mm(1)
    • 8.0 mm(2)
    • 9.525 mm(35)
    • 9.65 mm(1)
    • 9.701 mm(1)
    • 9.976 mm(1)
    • 10.0 mm(32)
    • 11.175 mm(1)
    • 11.701 mm(1)
    • 12.0 mm(34)
    • 12.701 mm(45)
    • 15.701 mm(1)
    • 15.875 mm(38)
    • 15.976 mm(3)
    • 16.0 mm(43)
    • 19.05 mm(38)
    • 19.701 mm(1)
    • 20.0 mm(40)
    • 25.0 mm(28)
    • 25.401 mm(36)
    • 31.75 mm(10)
    • 32.0 mm(14)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 9.525 mm(4)
    • 10.0 mm(4)
    • 12.0 mm(5)
    • 12.701 mm(5)
    • 15.875 mm(2)
    • 16.0 mm(5)
    • 25.401 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.375 in(4)
    • 0.394 in(4)
    • 0.473 in(5)
    • 0.5 in(5)
    • 0.625 in(2)
    • 0.63 in(5)
    • 1.0 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 0.5 mm(2)
    • 0.525 mm(2)
    • 0.625 mm(2)
    • 0.675 mm(2)
    • 0.75 mm(1)
    • 0.851 mm(4)
    • 1.0 mm(2)
    • 1.026 mm(1)
    • 1.05 mm(2)
    • 1.276 mm(1)
    • 1.5 mm(1)
    • 1.526 mm(2)
    • 1.901 mm(1)
    • 2.0 mm(4)
    • 2.551 mm(2)
    • 3.0 mm(5)
    • 3.051 mm(2)
    • 3.176 mm(2)
    • 4.0 mm(3)
    • 4.525 mm(1)
    • 7.15 mm(3)
    • 7.5 mm(3)
    • 9.0 mm(3)
    • 9.525 mm(3)
    • 11.9 mm(2)
    • 12.0 mm(3)
    • 14.3 mm(33)
    • 15.0 mm(30)
    • 17.5 mm(1)
    • 18.0 mm(28)
    • 18.55 mm(1)
    • 19.05 mm(39)
    • 23.8 mm(18)
    • 23.826 mm(16)
    • 24.0 mm(42)
    • 28.576 mm(33)
    • 30.0 mm(36)
    • 37.5 mm(28)
    • 38.1 mm(35)
    • 47.625 mm(10)
    • 48.0 mm(14)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.02 in(2)
    • 0.021 in(2)
    • 0.025 in(2)
    • 0.027 in(2)
    • 0.03 in(1)
    • 0.034 in(4)
    • 0.039 in(2)
    • 0.04 in(1)
    • 0.041 in(2)
    • 0.05 in(1)
    • 0.06 in(3)
    • 0.075 in(1)
    • 0.079 in(4)
    • 0.1 in(2)
    • 0.119 in(5)
    • 0.12 in(2)
    • 0.125 in(2)
    • 0.157 in(3)
    • 0.178 in(1)
    • 0.281 in(3)
    • 0.295 in(3)
    • 0.354 in(3)
    • 0.375 in(3)
    • 0.47 in(2)
    • 0.473 in(3)
    • 0.564 in(33)
    • 0.591 in(30)
    • 0.69 in(1)
    • 0.709 in(28)
    • 0.73 in(1)
    • 0.75 in(39)
    • 0.937 in(18)
    • 0.939 in(16)
    • 0.946 in(42)
    • 1.125 in(33)
    • 1.181 in(36)
    • 1.476 in(28)
    • 1.5 in(35)
    • 1.875 in(10)
    • 1.891 in(14)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.656 in(5)
    • 0.69 in(5)
    • 0.828 in(5)
    • 0.843 in(24)
    • 0.846 in(2)
    • 0.847 in(1)
    • 0.852 in(1)
    • 0.876 in(5)
    • 0.886 in(24)
    • 0.89 in(2)
    • 0.894 in(1)
    • 1.063 in(24)
    • 1.071 in(5)
    • 1.093 in(4)
    • 1.102 in(5)
    • 1.127 in(32)
    • 1.131 in(3)
    • 1.133 in(1)
    • 1.137 in(1)
    • 1.314 in(5)
    • 1.379 in(5)
    • 1.403 in(2)
    • 1.407 in(28)
    • 1.415 in(1)
    • 1.417 in(38)
    • 1.421 in(1)
    • 1.427 in(1)
    • 1.689 in(27)
    • 1.752 in(1)
    • 1.772 in(30)
    • 2.224 in(23)
    • 2.253 in(27)
    • 2.265 in(1)
    • 2.803 in(7)
    • 2.823 in(11)
    Reach MinkomuReach Max
    Reach
    Reach
    • 16.651 mm(5)
    • 17.5 mm(5)
    • 21.0 mm(5)
    • 21.401 mm(24)
    • 21.5 mm(2)
    • 21.526 mm(1)
    • 21.651 mm(1)
    • 22.25 mm(5)
    • 22.5 mm(24)
    • 22.6 mm(2)
    • 22.701 mm(1)
    • 27.0 mm(24)
    • 27.201 mm(5)
    • 27.75 mm(4)
    • 28.0 mm(5)
    • 28.6 mm(32)
    • 28.701 mm(2)
    • 28.725 mm(1)
    • 28.75 mm(1)
    • 28.85 mm(1)
    • 33.375 mm(5)
    • 35.0 mm(5)
    • 35.6 mm(2)
    • 35.7 mm(28)
    • 35.95 mm(1)
    • 36.0 mm(38)
    • 36.1 mm(1)
    • 36.25 mm(1)
    • 42.901 mm(27)
    • 44.5 mm(1)
    • 45.0 mm(30)
    • 56.5 mm(23)
    • 57.2 mm(27)
    • 57.5 mm(1)
    • 71.2 mm(7)
    • 71.7 mm(11)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (6)
    • 60.0 (6)
    • 90.0 (411)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • DUO-LOCK (423)
    Number of Flutes
    Number of Flutes
    • 11 (6)
    • 15 (4)
    • 19 (7)
    • 2 (8)
    • 3 (68)
    • 4 (150)
    • 5 (72)
    • 6 (98)
    • 9 (10)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.149 in(5)
    • 1.181 in(5)
    • 1.335 in(26)
    • 1.339 in(2)
    • 1.344 in(1)
    • 1.354 in(4)
    • 1.379 in(26)
    • 1.383 in(2)
    • 1.399 in(3)
    • 1.417 in(5)
    • 1.467 in(5)
    • 1.655 in(30)
    • 1.661 in(4)
    • 1.717 in(40)
    • 1.72 in(2)
    • 1.721 in(1)
    • 1.726 in(1)
    • 1.736 in(1)
    • 1.881 in(4)
    • 1.891 in(5)
    • 2.189 in(2)
    • 2.193 in(33)
    • 2.205 in(42)
    • 2.209 in(1)
    • 2.213 in(1)
    • 2.215 in(1)
    • 2.224 in(3)
    • 2.255 in(5)
    • 2.319 in(5)
    • 2.63 in(32)
    • 2.65 in(1)
    • 2.713 in(32)
    • 2.717 in(4)
    • 2.988 in(1)
    • 3.461 in(28)
    • 3.488 in(34)
    • 3.508 in(1)
    • 4.398 in(9)
    • 4.417 in(15)
    • 13.146 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 29.151 mm(5)
    • 30.0 mm(5)
    • 33.9 mm(26)
    • 34.0 mm(2)
    • 34.15 mm(1)
    • 34.4 mm(4)
    • 35.0 mm(26)
    • 35.1 mm(2)
    • 35.5 mm(3)
    • 36.0 mm(5)
    • 37.25 mm(5)
    • 42.0 mm(30)
    • 42.2 mm(4)
    • 43.6 mm(40)
    • 43.7 mm(2)
    • 43.725 mm(1)
    • 43.85 mm(1)
    • 44.1 mm(1)
    • 47.75 mm(4)
    • 48.0 mm(5)
    • 55.6 mm(2)
    • 55.7 mm(33)
    • 56.0 mm(42)
    • 56.1 mm(1)
    • 56.2 mm(1)
    • 56.25 mm(1)
    • 56.5 mm(3)
    • 57.276 mm(5)
    • 58.901 mm(5)
    • 66.8 mm(32)
    • 67.3 mm(1)
    • 68.9 mm(32)
    • 69.0 mm(4)
    • 75.9 mm(1)
    • 87.9 mm(28)
    • 88.601 mm(34)
    • 89.101 mm(1)
    • 111.7 mm(9)
    • 112.2 mm(15)
    • 333.901 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (38)
    • CHAMFER (57)
    • RADIUS (291)
    • SQUARE END (20)
    • TORUS (17)
    Corner Radius
    Corner Radius
    • 0.0 in(77)
    • 0.014 in(3)
    • 0.015 in(24)
    • 0.016 in(9)
    • 0.02 in(13)
    • 0.024 in(2)
    • 0.025 in(2)
    • 0.03 in(48)
    • 0.031 in(2)
    • 0.039 in(35)
    • 0.047 in(2)
    • 0.049 in(2)
    • 0.06 in(46)
    • 0.063 in(1)
    • 0.079 in(12)
    • 0.09 in(17)
    • 0.098 in(21)
    • 0.119 in(10)
    • 0.12 in(23)
    • 0.157 in(16)
    • 0.187 in(1)
    • 0.188 in(3)
    • 0.197 in(14)
    • 0.237 in(6)
    • 0.25 in(12)
    • 0.313 in(4)
    • 0.315 in(4)
    • 0.375 in(4)
    • 0.394 in(4)
    • 0.492 in(3)
    • 0.5 in(3)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(77)
    • 0.325 mm(3)
    • 0.375 mm(24)
    • 0.4 mm(9)
    • 0.5 mm(13)
    • 0.601 mm(2)
    • 0.625 mm(2)
    • 0.75 mm(48)
    • 0.8 mm(2)
    • 1.0 mm(35)
    • 1.201 mm(2)
    • 1.25 mm(2)
    • 1.5 mm(15)
    • 1.526 mm(31)
    • 1.6 mm(1)
    • 2.0 mm(12)
    • 2.275 mm(17)
    • 2.5 mm(21)
    • 3.0 mm(10)
    • 3.051 mm(23)
    • 4.0 mm(16)
    • 4.75 mm(1)
    • 4.775 mm(3)
    • 5.0 mm(14)
    • 6.0 mm(6)
    • 6.351 mm(12)
    • 7.95 mm(4)
    • 8.0 mm(4)
    • 9.525 mm(4)
    • 10.0 mm(4)
    • 12.5 mm(3)
    • 12.701 mm(3)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(372)
    • 0.5 mm(45)
    • 1.901 mm(1)
    • 2.0 mm(1)
    • 2.551 mm(1)
    • 3.0 mm(1)
    • 3.176 mm(1)
    • 4.0 mm(1)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(372)
    • 0.02 in(45)
    • 0.075 in(1)
    • 0.079 in(1)
    • 0.1 in(1)
    • 0.119 in(1)
    • 0.125 in(1)
    • 0.157 in(1)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K600 (53)
    • KC639M (8)
    • KC643M (78)
    • KCPM15 (135)
    • KCSM15 (149)
    Hand Of Tool
    Hand Of Tool
    • R (423)
    Rough Finish
    Rough Finish
    • F (396)
    • R (27)
    frontEnd
    Front End Type
    Front End Type
    • DLK - DUO-LOCK Modular Connect (133)
    Front End Style
    Front End Style
    • DLK01 DUO-LOCK (133)
    Gage Length
    Gage Length
    • 2 in(7)
    • 10 in(5)
    • 3 in(2)
    • 5 in(2)
    • 4 in(1)
    • 1.614 in(2)
    • 1.62 in(2)
    • 1.891 in(1)
    • 1.929 in(2)
    • 1.969 in(5)
    • 2.047 in(1)
    • 2.165 in(2)
    • 2.205 in(1)
    • 2.244 in(2)
    • 2.25 in(10)
    • 2.283 in(2)
    • 2.362 in(4)
    • 2.38 in(1)
    • 2.402 in(1)
    • 2.5 in(5)
    • 2.559 in(4)
    • 2.677 in(1)
    • 2.75 in(1)
    • 2.757 in(1)
    • 2.835 in(1)
    • 2.953 in(1)
    • 3.15 in(3)
    • 3.25 in(2)
    • 3.5 in(2)
    • 3.543 in(2)
    • 3.74 in(1)
    • 3.75 in(2)
    • 3.938 in(1)
    • 4.134 in(3)
    • 4.25 in(2)
    • 4.5 in(2)
    • 4.529 in(2)
    • 4.724 in(2)
    • 5.5 in(1)
    • 5.513 in(1)
    • 6.25 in(3)
    • 6.299 in(3)
    • 7.5 in(5)
    • 7.875 in(5)
    • 9.843 in(6)
    Gage Length
    Gage Length
    • 250 mm(6)
    • 200 mm(5)
    • 254 mm(5)
    • 50 mm(5)
    • 60 mm(4)
    • 65 mm(4)
    • 105 mm(3)
    • 160 mm(3)
    • 80 mm(3)
    • 115 mm(2)
    • 120 mm(2)
    • 127 mm(2)
    • 41 mm(2)
    • 49 mm(2)
    • 55 mm(2)
    • 57 mm(2)
    • 58 mm(2)
    • 90 mm(2)
    • 100 mm(1)
    • 140 mm(1)
    • 48 mm(1)
    • 52 mm(1)
    • 56 mm(1)
    • 61 mm(1)
    • 68 mm(1)
    • 70 mm(1)
    • 72 mm(1)
    • 75 mm(1)
    • 95 mm(1)
    • 41.151 mm(2)
    • 50.801 mm(7)
    • 57.151 mm(10)
    • 60.45 mm(1)
    • 63.5 mm(5)
    • 69.851 mm(1)
    • 76.2 mm(2)
    • 82.551 mm(2)
    • 88.9 mm(2)
    • 95.25 mm(2)
    • 101.601 mm(1)
    • 107.95 mm(2)
    • 114.301 mm(2)
    • 139.701 mm(1)
    • 158.75 mm(3)
    • 190.5 mm(5)
    Center Cutting
    Center Cutting
    backEnd
    Connection Type
    Connection Type
    • DUO-LOCK (358)
    • SHORT TAPER (65)
    System Size
    System Size
    • BT40 (5)
    • CV40 (5)
    • CV50 (4)
    • DV40 (4)
    • DV50 (4)
    • HSK100A (8)
    • HSK63A (11)
    • PSC63 (9)
    Back-End Diameter
    Back-End Diameter
    • 9.125 mm(5)
    • 9.525 mm(36)
    • 9.601 mm(13)
    • 10.0 mm(27)
    • 11.5 mm(3)
    • 12.0 mm(42)
    • 12.201 mm(50)
    • 12.701 mm(6)
    • 15.375 mm(5)
    • 15.5 mm(4)
    • 15.875 mm(27)
    • 16.0 mm(56)
    • 18.55 mm(5)
    • 19.05 mm(26)
    • 19.3 mm(41)
    • 20.0 mm(10)
    • 24.0 mm(4)
    • 24.401 mm(36)
    • 25.0 mm(30)
    • 25.401 mm(41)
    • 30.75 mm(2)
    • 31.0 mm(14)
    • 31.75 mm(14)
    • 32.0 mm(4)
    • 38.1 mm(1)
    • 40.0 mm(2)
    • 44.45 mm(14)
    • 50.0 mm(1)
    • 50.801 mm(1)
    • 63.0 mm(20)
    • 100.0 mm(4)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.359 in(5)
    • 0.375 in(36)
    • 0.378 in(13)
    • 0.394 in(27)
    • 0.453 in(3)
    • 0.473 in(42)
    • 0.48 in(50)
    • 0.5 in(6)
    • 0.605 in(5)
    • 0.61 in(4)
    • 0.625 in(27)
    • 0.63 in(56)
    • 0.73 in(5)
    • 0.75 in(26)
    • 0.76 in(41)
    • 0.787 in(10)
    • 0.946 in(4)
    • 0.961 in(36)
    • 0.984 in(30)
    • 1.0 in(41)
    • 1.211 in(2)
    • 1.22 in(14)
    • 1.25 in(14)
    • 1.26 in(4)
    • 1.5 in(1)
    • 1.575 in(2)
    • 1.75 in(14)
    • 1.969 in(1)
    • 2.0 in(1)
    • 2.48 in(20)
    • 3.938 in(4)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Modulární čelní stopkové frézy DUO-λOCK® • HARVI™
    (184)

    Modulární čelní stopkové frézy DUO-λOCK® • HARVI™

    Adaptéry DUO-λOCK®
    (165)

    Adaptéry DUO-λOCK®

    DUO-λOCK® Modular End Mills • HARVI™ I TE
    (65)

    DUO-λOCK® Modular End Mills • HARVI™ I TE

    Modulární čelní stopkové frézy DUO-λOCK® • MaxiMet™
    (53)

    Modulární čelní stopkové frézy DUO-λOCK® • MaxiMet™

    Modulární čelní stopkové frézy DUO-λOCK® • dokončovací
    (52)

    Modulární čelní stopkové frézy DUO-λOCK® • dokončovací

    Modulární čelní stopkové frézy DUO-λOCK® • pro hrubování
    (27)

    Modulární čelní stopkové frézy DUO-λOCK® • pro hrubování

    Modulární stopkové frézy DUO-λOCK® • pro zaoblování a srážení hran s karbidovými špičkami
    (25)

    Modulární stopkové frézy DUO-λOCK® • pro zaoblování a srážení hran s karbidovými špičkami

    Modulární čelní stopkové frézy DUO-λOCK® • KenFEED™
    (17)

    Modulární čelní stopkové frézy DUO-λOCK® • KenFEED™

    Máte na nás otázky?

    Náš kvalifikovaný personál je připraven pomoci.

    Kontaktujte Prodejce
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?