Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Drill-Fix DFR

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (202)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(199)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(199)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(200)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(200)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(199)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(199)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(199)
    • M Stainless Steel (199)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(199)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(199)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(199)
    • K Cast Iron (193)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(193)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(193)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(193)
    • N Non-Ferrous Materials (189)
      • N1
        Wrought Aluminum (189)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(189)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(185)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (189)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (189)
      • N6
        Carbon, Graphite Composites, CFRP (113)
    • S High-Temp Alloys (199)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(199)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(199)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(199)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(199)
    Vybrat první volbu
    • BR (9)
    • CN (70)
    • DE (70)
    • GB (32)
    • IN (3)
    • SG (21)
    • US (59)
    Applications
    Applications
    • Convex DrillingConvex Drilling (151)
    • DrillingDrilling (175)
    • Inclined Entry DrillingInclined Entry Drilling (151)
    • Inclined Exit DrillingInclined Exit Drilling (151)
    • X-Offset DrillingX-Offset Drilling (151)
    Cutting Diameter
    Cutting Diameter
    • 0.492 in(7)
    • 0.5 in(7)
    • 0.512 in(5)
    • 0.531 in(7)
    • 0.551 in(7)
    • 0.564 in(3)
    • 0.572 in(5)
    • 0.591 in(6)
    • 0.595 in(2)
    • 0.61 in(5)
    • 0.625 in(5)
    • 0.63 in(7)
    • 0.65 in(4)
    • 0.656 in(3)
    • 0.669 in(7)
    • 0.689 in(4)
    • 0.69 in(4)
    • 0.704 in(3)
    • 0.709 in(5)
    • 0.728 in(4)
    • 0.734 in(3)
    • 0.748 in(5)
    • 0.75 in(4)
    • 0.768 in(4)
    • 0.781 in(3)
    • 0.787 in(5)
    • 0.807 in(4)
    • 0.814 in(4)
    • 0.828 in(6)
    • 0.845 in(3)
    • 0.866 in(5)
    • 0.875 in(5)
    • 0.906 in(7)
    • 0.939 in(3)
    • 0.946 in(5)
    • 0.969 in(2)
    • 0.984 in(2)
    • 1.0 in(5)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 12.5 mm(7)
    • 12.701 mm(7)
    • 13.0 mm(5)
    • 13.476 mm(2)
    • 13.5 mm(5)
    • 14.0 mm(7)
    • 14.3 mm(3)
    • 14.5 mm(5)
    • 15.0 mm(6)
    • 15.101 mm(2)
    • 15.5 mm(5)
    • 15.875 mm(5)
    • 16.0 mm(7)
    • 16.5 mm(4)
    • 16.651 mm(3)
    • 17.0 mm(7)
    • 17.475 mm(4)
    • 17.5 mm(4)
    • 17.85 mm(3)
    • 18.0 mm(5)
    • 18.5 mm(4)
    • 18.651 mm(3)
    • 19.0 mm(5)
    • 19.05 mm(4)
    • 19.5 mm(4)
    • 19.826 mm(3)
    • 20.0 mm(5)
    • 20.5 mm(4)
    • 20.651 mm(4)
    • 21.0 mm(6)
    • 21.451 mm(3)
    • 22.0 mm(5)
    • 22.225 mm(5)
    • 23.0 mm(7)
    • 23.826 mm(3)
    • 24.0 mm(5)
    • 24.625 mm(2)
    • 25.0 mm(2)
    • 25.401 mm(5)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Condition
    Cutting Condition
    • Interrupted (24)
    • Stable (30)
    • Unstable (30)
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 25.0 mm(2)
    • 25.401 mm(2)
    • 26.0 mm(1)
    • 27.0 mm(1)
    • 28.0 mm(2)
    • 28.6 mm(1)
    • 29.0 mm(2)
    • 30.0 mm(1)
    • 31.0 mm(1)
    • 31.75 mm(1)
    • 32.0 mm(2)
    • 33.0 mm(1)
    • 34.0 mm(2)
    • 34.95 mm(1)
    • 35.0 mm(1)
    • 36.0 mm(1)
    • 37.0 mm(1)
    • 37.5 mm(3)
    • 38.0 mm(1)
    • 38.1 mm(3)
    • 39.0 mm(4)
    • 40.0 mm(1)
    • 40.45 mm(1)
    • 40.5 mm(2)
    • 41.0 mm(1)
    • 41.301 mm(1)
    • 42.0 mm(4)
    • 42.901 mm(2)
    • 43.5 mm(2)
    • 44.0 mm(1)
    • 44.45 mm(1)
    • 45.0 mm(3)
    • 45.276 mm(1)
    • 46.0 mm(1)
    • 46.5 mm(2)
    • 47.625 mm(2)
    • 47.651 mm(1)
    • 48.0 mm(4)
    • 49.5 mm(1)
    • 49.975 mm(2)
    • 50.0 mm(2)
    • 50.801 mm(3)
    • 51.0 mm(3)
    • 52.0 mm(1)
    • 52.426 mm(2)
    • 52.5 mm(2)
    • 53.575 mm(2)
    • 53.95 mm(1)
    • 54.0 mm(5)
    • 55.5 mm(2)
    • 55.926 mm(2)
    • 56.0 mm(2)
    • 57.0 mm(3)
    • 57.151 mm(2)
    • 57.2 mm(1)
    • 58.0 mm(1)
    • 58.5 mm(2)
    • 59.5 mm(2)
    • 60.0 mm(5)
    • 60.35 mm(1)
    • 61.5 mm(2)
    • 61.95 mm(2)
    • 62.0 mm(2)
    • 63.0 mm(4)
    • 63.5 mm(2)
    • 64.0 mm(2)
    • 64.325 mm(2)
    • 66.0 mm(5)
    • 66.65 mm(1)
    • 66.675 mm(3)
    • 68.0 mm(2)
    • 69.0 mm(3)
    • 69.025 mm(1)
    • 69.9 mm(1)
    • 70.0 mm(1)
    • 71.425 mm(1)
    • 71.476 mm(1)
    • 72.0 mm(4)
    • 73.851 mm(1)
    • 74.0 mm(1)
    • 74.575 mm(1)
    • 74.976 mm(1)
    • 76.0 mm(1)
    • 76.2 mm(3)
    • 78.0 mm(1)
    • 79.351 mm(1)
    • 80.0 mm(1)
    • 82.0 mm(1)
    • 82.601 mm(1)
    • 84.0 mm(1)
    • 85.75 mm(1)
    • 88.0 mm(1)
    • 88.9 mm(1)
    • 92.0 mm(1)
    • 92.051 mm(1)
    • 95.301 mm(1)
    • 96.0 mm(1)
    • 97.426 mm(1)
    • 98.45 mm(1)
    • 101.601 mm(2)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.984 in(2)
    • 1.0 in(2)
    • 1.024 in(1)
    • 1.063 in(1)
    • 1.102 in(2)
    • 1.127 in(1)
    • 1.143 in(2)
    • 1.181 in(1)
    • 1.22 in(1)
    • 1.25 in(1)
    • 1.26 in(2)
    • 1.299 in(1)
    • 1.339 in(2)
    • 1.377 in(1)
    • 1.379 in(1)
    • 1.417 in(1)
    • 1.457 in(1)
    • 1.476 in(3)
    • 1.496 in(1)
    • 1.5 in(3)
    • 1.536 in(4)
    • 1.575 in(1)
    • 1.593 in(1)
    • 1.594 in(2)
    • 1.614 in(1)
    • 1.627 in(1)
    • 1.655 in(4)
    • 1.689 in(2)
    • 1.713 in(2)
    • 1.732 in(1)
    • 1.75 in(1)
    • 1.772 in(3)
    • 1.784 in(1)
    • 1.811 in(1)
    • 1.831 in(2)
    • 1.875 in(2)
    • 1.877 in(1)
    • 1.891 in(4)
    • 1.949 in(1)
    • 1.968 in(2)
    • 1.969 in(2)
    • 2.0 in(3)
    • 2.008 in(3)
    • 2.047 in(1)
    • 2.064 in(2)
    • 2.067 in(2)
    • 2.109 in(2)
    • 2.124 in(1)
    • 2.126 in(5)
    • 2.185 in(2)
    • 2.202 in(2)
    • 2.205 in(2)
    • 2.244 in(3)
    • 2.25 in(2)
    • 2.253 in(1)
    • 2.283 in(1)
    • 2.303 in(2)
    • 2.343 in(2)
    • 2.362 in(5)
    • 2.376 in(1)
    • 2.422 in(2)
    • 2.439 in(2)
    • 2.441 in(2)
    • 2.48 in(4)
    • 2.5 in(2)
    • 2.52 in(2)
    • 2.532 in(2)
    • 2.598 in(5)
    • 2.624 in(1)
    • 2.625 in(3)
    • 2.677 in(2)
    • 2.717 in(3)
    • 2.718 in(1)
    • 2.753 in(1)
    • 2.757 in(1)
    • 2.813 in(1)
    • 2.814 in(1)
    • 2.835 in(4)
    • 2.908 in(1)
    • 2.914 in(1)
    • 2.936 in(1)
    • 2.952 in(1)
    • 2.992 in(1)
    • 3.0 in(3)
    • 3.071 in(1)
    • 3.124 in(1)
    • 3.15 in(1)
    • 3.228 in(1)
    • 3.253 in(1)
    • 3.307 in(1)
    • 3.376 in(1)
    • 3.465 in(1)
    • 3.5 in(1)
    • 3.622 in(1)
    • 3.624 in(1)
    • 3.753 in(1)
    • 3.781 in(1)
    • 3.837 in(1)
    • 3.876 in(1)
    • 4.0 in(2)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 1.024 in(1)
    • 1.102 in(1)
    • 1.143 in(3)
    • 1.181 in(2)
    • 1.22 in(1)
    • 1.26 in(1)
    • 1.299 in(1)
    • 1.339 in(1)
    • 1.379 in(2)
    • 1.417 in(2)
    • 1.457 in(2)
    • 1.496 in(2)
    • 1.614 in(3)
    • 1.655 in(3)
    • 1.693 in(1)
    • 1.732 in(3)
    • 1.772 in(5)
    • 1.811 in(4)
    • 1.85 in(2)
    • 1.891 in(1)
    • 1.929 in(3)
    • 1.969 in(5)
    • 2.008 in(3)
    • 2.047 in(2)
    • 2.087 in(4)
    • 2.126 in(8)
    • 2.165 in(1)
    • 2.205 in(4)
    • 2.244 in(3)
    • 2.283 in(2)
    • 2.323 in(4)
    • 2.362 in(5)
    • 2.402 in(3)
    • 2.441 in(1)
    • 2.48 in(5)
    • 2.52 in(3)
    • 2.559 in(6)
    • 2.598 in(2)
    • 2.638 in(3)
    • 2.677 in(5)
    • 2.757 in(7)
    • 2.795 in(2)
    • 2.835 in(2)
    • 2.914 in(2)
    • 2.953 in(3)
    • 2.992 in(2)
    • 3.031 in(3)
    • 3.071 in(4)
    • 3.11 in(3)
    • 3.15 in(1)
    • 3.189 in(4)
    • 3.228 in(5)
    • 3.269 in(1)
    • 3.307 in(2)
    • 3.346 in(2)
    • 3.386 in(1)
    • 3.426 in(3)
    • 3.504 in(1)
    • 3.583 in(2)
    • 3.701 in(1)
    • 3.74 in(1)
    • 3.781 in(1)
    • 3.858 in(1)
    • 3.938 in(1)
    • 3.976 in(1)
    • 4.094 in(2)
    • 4.173 in(1)
    • 4.213 in(2)
    • 4.252 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 26.0 mm(1)
    • 28.0 mm(1)
    • 29.0 mm(3)
    • 30.0 mm(2)
    • 31.0 mm(1)
    • 32.0 mm(1)
    • 33.0 mm(1)
    • 34.0 mm(1)
    • 35.0 mm(2)
    • 36.0 mm(2)
    • 37.0 mm(2)
    • 38.0 mm(2)
    • 41.0 mm(3)
    • 42.0 mm(3)
    • 43.0 mm(1)
    • 44.0 mm(3)
    • 45.0 mm(5)
    • 46.0 mm(4)
    • 47.0 mm(2)
    • 48.0 mm(1)
    • 49.0 mm(3)
    • 50.0 mm(5)
    • 51.0 mm(3)
    • 52.0 mm(2)
    • 53.0 mm(4)
    • 54.0 mm(8)
    • 55.0 mm(1)
    • 56.0 mm(4)
    • 57.0 mm(3)
    • 58.0 mm(2)
    • 59.0 mm(4)
    • 60.0 mm(5)
    • 61.0 mm(3)
    • 62.0 mm(1)
    • 63.0 mm(5)
    • 64.0 mm(3)
    • 65.0 mm(6)
    • 66.0 mm(2)
    • 67.0 mm(3)
    • 68.0 mm(5)
    • 70.0 mm(7)
    • 71.0 mm(2)
    • 72.0 mm(2)
    • 74.0 mm(2)
    • 75.0 mm(3)
    • 76.0 mm(2)
    • 77.0 mm(3)
    • 78.0 mm(4)
    • 79.0 mm(3)
    • 80.0 mm(1)
    • 81.0 mm(4)
    • 82.0 mm(5)
    • 83.0 mm(1)
    • 84.0 mm(2)
    • 85.0 mm(2)
    • 86.0 mm(1)
    • 87.0 mm(3)
    • 89.0 mm(1)
    • 91.0 mm(2)
    • 94.0 mm(1)
    • 95.0 mm(1)
    • 96.0 mm(1)
    • 98.0 mm(1)
    • 100.0 mm(1)
    • 101.0 mm(1)
    • 104.0 mm(2)
    • 106.0 mm(1)
    • 107.0 mm(2)
    • 108.0 mm(1)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • Cylindrical Shank 1 Flat (24)
    • Cylindrical Shank 2 Flats (60)
    • KM (15)
    • Whistle Drive 2 (39)
    • Whistle Notch 2 CylindricalEnd (37)
    Number of Flutes
    Number of Flutes
    • 2 (175)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (51)
    • 2.0 (204)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.637 in(1)
    • 3.653 in(1)
    • 3.656 in(1)
    • 3.676 in(1)
    • 3.714 in(1)
    • 3.716 in(1)
    • 3.755 in(1)
    • 3.819 in(1)
    • 3.833 in(1)
    • 3.873 in(1)
    • 3.912 in(1)
    • 3.938 in(1)
    • 3.95 in(1)
    • 3.952 in(2)
    • 3.991 in(1)
    • 4.055 in(1)
    • 4.069 in(1)
    • 4.078 in(1)
    • 4.13 in(1)
    • 4.154 in(1)
    • 4.173 in(1)
    • 4.188 in(1)
    • 4.202 in(1)
    • 4.228 in(1)
    • 4.247 in(1)
    • 4.306 in(1)
    • 4.311 in(1)
    • 4.331 in(1)
    • 4.346 in(1)
    • 4.351 in(1)
    • 4.37 in(1)
    • 4.429 in(1)
    • 4.439 in(1)
    • 4.444 in(1)
    • 4.449 in(1)
    • 4.488 in(1)
    • 4.5 in(1)
    • 4.503 in(1)
    • 4.505 in(1)
    • 4.562 in(1)
    • 4.606 in(1)
    • 4.621 in(1)
    • 4.622 in(1)
    • 4.626 in(1)
    • 4.646 in(1)
    • 4.686 in(2)
    • 4.705 in(1)
    • 4.742 in(1)
    • 4.744 in(1)
    • 4.764 in(1)
    • 4.781 in(1)
    • 4.783 in(1)
    • 4.803 in(2)
    • 4.807 in(1)
    • 4.821 in(1)
    • 4.827 in(1)
    • 4.835 in(1)
    • 4.843 in(1)
    • 4.86 in(1)
    • 4.9 in(1)
    • 4.902 in(1)
    • 4.923 in(1)
    • 4.939 in(1)
    • 4.953 in(1)
    • 4.961 in(1)
    • 4.978 in(1)
    • 4.998 in(1)
    • 5.0 in(1)
    • 5.019 in(1)
    • 5.039 in(1)
    • 5.045 in(1)
    • 5.057 in(1)
    • 5.059 in(2)
    • 5.079 in(1)
    • 5.117 in(1)
    • 5.118 in(1)
    • 5.127 in(1)
    • 5.136 in(1)
    • 5.157 in(1)
    • 5.175 in(1)
    • 5.178 in(1)
    • 5.179 in(1)
    • 5.208 in(1)
    • 5.219 in(1)
    • 5.22 in(1)
    • 5.234 in(1)
    • 5.236 in(1)
    • 5.268 in(1)
    • 5.276 in(1)
    • 5.297 in(1)
    • 5.298 in(1)
    • 5.354 in(1)
    • 5.36 in(1)
    • 5.376 in(1)
    • 5.392 in(1)
    • 5.412 in(1)
    • 5.433 in(1)
    • 5.45 in(1)
    • 5.452 in(1)
    • 5.455 in(1)
    • 5.461 in(1)
    • 5.474 in(1)
    • 5.51 in(1)
    • 5.518 in(1)
    • 5.533 in(1)
    • 5.569 in(1)
    • 5.628 in(1)
    • 5.648 in(2)
    • 5.652 in(1)
    • 5.687 in(1)
    • 5.71 in(1)
    • 5.74 in(1)
    • 5.746 in(1)
    • 5.771 in(1)
    • 5.787 in(1)
    • 5.827 in(1)
    • 5.865 in(1)
    • 5.888 in(1)
    • 5.923 in(2)
    • 5.986 in(1)
    • 5.992 in(1)
    • 6.019 in(1)
    • 6.024 in(1)
    • 6.045 in(1)
    • 6.102 in(1)
    • 6.115 in(1)
    • 6.127 in(1)
    • 6.163 in(1)
    • 6.181 in(1)
    • 6.22 in(1)
    • 6.26 in(1)
    • 6.268 in(1)
    • 6.281 in(1)
    • 6.339 in(1)
    • 6.36 in(1)
    • 6.4 in(1)
    • 6.417 in(1)
    • 6.45 in(1)
    • 6.461 in(1)
    • 6.496 in(1)
    • 6.575 in(1)
    • 6.579 in(1)
    • 6.649 in(1)
    • 6.654 in(1)
    • 6.707 in(1)
    • 6.732 in(1)
    • 6.74 in(1)
    • 6.83 in(1)
    • 6.835 in(1)
    • 6.891 in(1)
    • 6.929 in(1)
    • 6.954 in(1)
    • 7.018 in(1)
    • 7.024 in(1)
    • 7.047 in(1)
    • 7.069 in(1)
    • 7.115 in(1)
    • 7.142 in(1)
    • 7.205 in(1)
    • 7.274 in(1)
    • 7.365 in(1)
    • 7.492 in(1)
    • 7.615 in(1)
    • 7.739 in(1)
    • 7.867 in(1)
    • 7.992 in(1)
    • 8.051 in(1)
    • 8.115 in(1)
    • 8.365 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 92.375 mm(1)
    • 92.775 mm(1)
    • 92.825 mm(1)
    • 93.375 mm(1)
    • 94.325 mm(1)
    • 94.375 mm(1)
    • 95.375 mm(1)
    • 97.0 mm(1)
    • 97.325 mm(1)
    • 98.375 mm(1)
    • 99.375 mm(1)
    • 100.0 mm(1)
    • 100.325 mm(1)
    • 100.375 mm(2)
    • 101.375 mm(1)
    • 103.0 mm(1)
    • 103.325 mm(1)
    • 103.575 mm(1)
    • 104.875 mm(1)
    • 105.476 mm(1)
    • 106.0 mm(1)
    • 106.375 mm(1)
    • 106.726 mm(1)
    • 107.4 mm(1)
    • 107.875 mm(1)
    • 109.375 mm(1)
    • 109.5 mm(1)
    • 110.0 mm(1)
    • 110.4 mm(1)
    • 110.5 mm(1)
    • 111.0 mm(1)
    • 112.5 mm(1)
    • 112.75 mm(1)
    • 112.875 mm(1)
    • 113.0 mm(1)
    • 114.0 mm(1)
    • 114.301 mm(1)
    • 114.375 mm(1)
    • 114.4 mm(1)
    • 115.875 mm(1)
    • 117.0 mm(1)
    • 117.375 mm(1)
    • 117.4 mm(1)
    • 117.5 mm(1)
    • 117.976 mm(1)
    • 119.0 mm(2)
    • 119.5 mm(1)
    • 120.45 mm(1)
    • 120.5 mm(1)
    • 121.0 mm(1)
    • 121.45 mm(1)
    • 121.5 mm(1)
    • 122.0 mm(2)
    • 122.101 mm(1)
    • 122.45 mm(1)
    • 122.601 mm(1)
    • 122.801 mm(1)
    • 123.0 mm(1)
    • 123.45 mm(1)
    • 124.45 mm(1)
    • 124.5 mm(1)
    • 125.051 mm(1)
    • 125.45 mm(1)
    • 125.801 mm(1)
    • 126.0 mm(1)
    • 126.45 mm(1)
    • 126.95 mm(1)
    • 127.0 mm(1)
    • 127.476 mm(1)
    • 128.0 mm(1)
    • 128.15 mm(1)
    • 128.451 mm(1)
    • 128.5 mm(2)
    • 129.0 mm(1)
    • 129.951 mm(1)
    • 130.0 mm(1)
    • 130.225 mm(1)
    • 130.451 mm(1)
    • 131.0 mm(1)
    • 131.451 mm(1)
    • 131.5 mm(1)
    • 131.55 mm(1)
    • 132.275 mm(1)
    • 132.55 mm(1)
    • 132.576 mm(1)
    • 132.951 mm(1)
    • 133.0 mm(1)
    • 133.8 mm(1)
    • 134.0 mm(1)
    • 134.55 mm(1)
    • 134.576 mm(1)
    • 136.0 mm(1)
    • 136.15 mm(1)
    • 136.55 mm(1)
    • 136.951 mm(1)
    • 137.451 mm(1)
    • 138.0 mm(1)
    • 138.425 mm(1)
    • 138.451 mm(1)
    • 138.55 mm(1)
    • 138.701 mm(1)
    • 139.05 mm(1)
    • 139.951 mm(1)
    • 140.15 mm(1)
    • 140.55 mm(1)
    • 141.451 mm(1)
    • 142.951 mm(1)
    • 143.451 mm(2)
    • 143.55 mm(1)
    • 144.451 mm(1)
    • 145.0 mm(1)
    • 145.8 mm(1)
    • 145.951 mm(1)
    • 146.55 mm(1)
    • 147.0 mm(1)
    • 148.0 mm(1)
    • 148.975 mm(1)
    • 149.55 mm(1)
    • 150.451 mm(2)
    • 152.05 mm(1)
    • 152.175 mm(1)
    • 152.875 mm(1)
    • 153.0 mm(1)
    • 153.55 mm(1)
    • 155.0 mm(1)
    • 155.326 mm(1)
    • 155.625 mm(1)
    • 156.55 mm(1)
    • 157.0 mm(1)
    • 157.976 mm(1)
    • 159.0 mm(1)
    • 159.201 mm(1)
    • 159.55 mm(1)
    • 161.0 mm(1)
    • 161.55 mm(1)
    • 162.55 mm(1)
    • 163.0 mm(1)
    • 163.826 mm(1)
    • 164.101 mm(1)
    • 165.0 mm(1)
    • 167.0 mm(1)
    • 167.101 mm(1)
    • 168.851 mm(1)
    • 169.0 mm(1)
    • 170.351 mm(1)
    • 171.0 mm(1)
    • 171.201 mm(1)
    • 173.476 mm(1)
    • 173.576 mm(1)
    • 175.0 mm(1)
    • 176.0 mm(1)
    • 176.625 mm(1)
    • 178.25 mm(1)
    • 178.375 mm(1)
    • 179.0 mm(1)
    • 179.525 mm(1)
    • 180.726 mm(1)
    • 181.4 mm(1)
    • 183.0 mm(1)
    • 184.75 mm(1)
    • 187.076 mm(1)
    • 190.275 mm(1)
    • 193.425 mm(1)
    • 196.576 mm(1)
    • 199.826 mm(1)
    • 202.976 mm(1)
    • 204.5 mm(1)
    • 206.125 mm(1)
    • 212.476 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(30)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(30)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(30)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(30)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC7020 (175)
    • KC7025 (175)
    • KC7140 (184)
    • KC7225 (175)
    • KC7815 (175)
    • KC7820 (175)
    • KCMS35 (111)
    • KCPK10 (178)
    • KCU25 (181)
    • KCU40 (184)
    • KD1425 (51)
    Hand Of Tool
    Hand Of Tool
    • R (175)
    Wiper Insert
    Wiper Insert
    • N (30)
    Drill Type
    Drill Type
    • 86-01 (175)
    insertGeometry
    Shape
    Shape
    • B-PARALLELOGRAM 82 (30)
    Insert IC Size
    Insert IC Size
    • 6.0 mm(19)
    • 8.0 mm(10)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.237 in(19)
    • 0.315 in(10)
    Insert IC Size MinkomuInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (12)
    • LD (6)
    • MD (11)
    Cutting Tool Material
    Cutting Tool Material
    • D P (1)
    • H W (29)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (160)
    • TAPER SHANK (15)
    System Size
    System Size
    • KM32TS (1)
    • KM40TS (13)
    • KM50TS (1)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(23)
    • 20.0 mm(50)
    • 25.0 mm(11)
    • 25.401 mm(35)
    • 31.75 mm(2)
    • 32.0 mm(40)
    • 40.0 mm(13)
    • 50.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(23)
    • 0.787 in(50)
    • 0.984 in(11)
    • 1.0 in(35)
    • 1.25 in(2)
    • 1.26 in(40)
    • 1.575 in(13)
    • 1.969 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Drill Fix DFR • Metrické
    (160)

    Drill Fix DFR • Metrické

    Drill Fix DFR • Břitové destičky
    (30)

    Drill Fix DFR • Břitové destičky

    Drill Fix DFR • KM-TS
    (15)

    Drill Fix DFR • KM-TS

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk