Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KSEM Chamfering Solutions

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (54)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(54)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(54)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(54)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(54)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(54)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(54)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(25)
    • M Stainless Steel (54)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(54)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(54)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(54)
    • K Cast Iron (54)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(54)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(54)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(54)
    • N Non-Ferrous Materials (54)
      • N1
        Wrought Aluminum (54)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(54)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(54)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (54)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (54)
      • N6
        Carbon, Graphite Composites, CFRP (54)
      • N7
        MMC's (54)
    • S High-Temp Alloys (54)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(54)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(54)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(54)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(54)
    • H Hardened Materials (29)
      • H1
        Hardened Materials 44-48 HRC(29)
      • H2
        Hardened Materials 48-55 HRC(29)
      • H3
        Hardened Materials 56-60 HRC(29)
      • H4
        Hardened Materials >60 HRC(29)
    Applications
    Applications
    • CountersinkingCountersinking (42)
    • DrillingDrilling (42)
    Cutting Diameter
    Cutting Diameter
    • 0.492 in(1)
    • 0.496 in(1)
    • 0.5 in(1)
    • 0.504 in(1)
    • 0.509 in(1)
    • 0.512 in(1)
    • 0.516 in(1)
    • 0.52 in(1)
    • 0.531 in(1)
    • 0.535 in(1)
    • 0.539 in(1)
    • 0.543 in(1)
    • 0.547 in(1)
    • 0.551 in(1)
    • 0.555 in(1)
    • 0.557 in(1)
    • 0.559 in(1)
    • 0.564 in(1)
    • 0.568 in(1)
    • 0.572 in(1)
    • 0.576 in(1)
    • 0.578 in(1)
    • 0.583 in(1)
    • 0.591 in(1)
    • 0.594 in(1)
    • 0.602 in(1)
    • 0.609 in(1)
    • 0.61 in(1)
    • 0.614 in(1)
    • 0.618 in(1)
    • 0.622 in(1)
    • 0.63 in(1)
    • 0.632 in(1)
    • 0.634 in(1)
    • 0.636 in(1)
    • 0.638 in(1)
    • 0.641 in(1)
    • 0.65 in(1)
    • 0.654 in(1)
    • 0.656 in(1)
    • 0.669 in(1)
    • 0.672 in(1)
    • 0.683 in(1)
    • 0.687 in(1)
    • 0.69 in(1)
    • 0.694 in(1)
    • 0.698 in(1)
    • 0.7 in(1)
    • 0.702 in(1)
    • 0.704 in(1)
    • 0.705 in(1)
    • 0.709 in(1)
    • 0.719 in(1)
    • 0.72 in(1)
    • 0.724 in(1)
    • 0.728 in(1)
    • 0.732 in(1)
    • 0.734 in(1)
    • 0.74 in(1)
    • 0.744 in(1)
    • 0.748 in(1)
    • 0.75 in(1)
    • 0.756 in(1)
    • 0.757 in(1)
    • 0.758 in(1)
    • 0.759 in(1)
    • 0.761 in(1)
    • 0.762 in(1)
    • 0.763 in(1)
    • 0.766 in(1)
    • 0.768 in(1)
    • 0.774 in(1)
    • 0.776 in(1)
    • 0.781 in(1)
    • 0.787 in(1)
    • 0.788 in(1)
    • 0.791 in(1)
    • 0.797 in(1)
    • 0.801 in(1)
    • 0.807 in(1)
    • 0.814 in(1)
    • 0.816 in(1)
    • 0.828 in(1)
    • 0.832 in(1)
    • 0.833 in(1)
    • 0.835 in(1)
    • 0.84 in(1)
    • 0.844 in(1)
    • 0.846 in(1)
    • 0.854 in(1)
    • 0.859 in(1)
    • 0.866 in(1)
    • 0.87 in(1)
    • 0.872 in(1)
    • 0.875 in(1)
    • 0.884 in(1)
    • 0.886 in(1)
    • 0.891 in(1)
    • 0.897 in(1)
    • 0.906 in(1)
    • 0.907 in(1)
    • 0.909 in(1)
    • 0.915 in(1)
    • 0.917 in(1)
    • 0.922 in(1)
    • 0.925 in(1)
    • 0.929 in(1)
    • 0.933 in(1)
    • 0.937 in(1)
    • 0.946 in(1)
    • 0.958 in(1)
    • 0.965 in(1)
    • 0.969 in(1)
    • 0.972 in(1)
    • 0.984 in(1)
    • 0.987 in(1)
    • 0.994 in(1)
    • 0.996 in(1)
    • 1.0 in(1)
    • 1.004 in(1)
    • 1.006 in(1)
    • 1.008 in(1)
    • 1.01 in(1)
    • 1.012 in(1)
    • 1.014 in(1)
    • 1.016 in(1)
    • 1.024 in(1)
    • 1.032 in(1)
    • 1.035 in(1)
    • 1.043 in(1)
    • 1.044 in(1)
    • 1.047 in(1)
    • 1.051 in(1)
    • 1.063 in(1)
    • 1.083 in(1)
    • 1.094 in(1)
    • 1.102 in(1)
    • 1.106 in(1)
    • 1.109 in(1)
    • 1.116 in(1)
    • 1.122 in(1)
    • 1.125 in(1)
    • 1.143 in(1)
    • 1.156 in(1)
    • 1.161 in(1)
    • 1.163 in(1)
    • 1.17 in(1)
    • 1.172 in(1)
    • 1.181 in(1)
    • 1.187 in(1)
    • 1.201 in(1)
    • 1.203 in(1)
    • 1.219 in(1)
    • 1.22 in(1)
    • 1.226 in(1)
    • 1.23 in(1)
    • 1.24 in(1)
    • 1.25 in(1)
    • 1.26 in(1)
    • 1.268 in(1)
    • 1.274 in(1)
    • 1.28 in(1)
    • 1.282 in(1)
    • 1.297 in(1)
    • 1.299 in(1)
    • 1.313 in(1)
    • 1.315 in(1)
    • 1.319 in(1)
    • 1.328 in(1)
    • 1.339 in(1)
    • 1.344 in(1)
    • 1.358 in(1)
    • 1.375 in(1)
    • 1.379 in(1)
    • 1.399 in(1)
    • 1.407 in(1)
    • 1.417 in(1)
    • 1.422 in(1)
    • 1.437 in(1)
    • 1.457 in(1)
    • 1.469 in(1)
    • 1.476 in(1)
    • 1.496 in(1)
    • 1.5 in(1)
    • 1.514 in(1)
    • 1.516 in(1)
    • 1.536 in(1)
    • 1.543 in(1)
    • 1.555 in(1)
    • 1.565 in(1)
    • 1.575 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 12.5 mm(1)
    • 12.601 mm(1)
    • 12.701 mm(1)
    • 12.8 mm(1)
    • 12.925 mm(1)
    • 13.0 mm(1)
    • 13.101 mm(1)
    • 13.201 mm(1)
    • 13.5 mm(1)
    • 13.601 mm(1)
    • 13.701 mm(1)
    • 13.8 mm(1)
    • 13.9 mm(1)
    • 14.0 mm(1)
    • 14.101 mm(1)
    • 14.15 mm(1)
    • 14.201 mm(1)
    • 14.3 mm(1)
    • 14.4 mm(1)
    • 14.5 mm(1)
    • 14.601 mm(1)
    • 14.675 mm(1)
    • 14.8 mm(1)
    • 15.0 mm(1)
    • 15.076 mm(1)
    • 15.3 mm(1)
    • 15.476 mm(1)
    • 15.5 mm(1)
    • 15.601 mm(1)
    • 15.701 mm(1)
    • 15.8 mm(1)
    • 16.0 mm(1)
    • 16.05 mm(1)
    • 16.1 mm(1)
    • 16.151 mm(1)
    • 16.2 mm(1)
    • 16.276 mm(1)
    • 16.5 mm(1)
    • 16.6 mm(1)
    • 16.675 mm(1)
    • 17.0 mm(1)
    • 17.075 mm(1)
    • 17.35 mm(1)
    • 17.45 mm(1)
    • 17.5 mm(1)
    • 17.6 mm(1)
    • 17.7 mm(1)
    • 17.75 mm(1)
    • 17.8 mm(1)
    • 17.85 mm(1)
    • 17.901 mm(1)
    • 18.0 mm(1)
    • 18.25 mm(1)
    • 18.3 mm(1)
    • 18.401 mm(1)
    • 18.5 mm(1)
    • 18.6 mm(1)
    • 18.651 mm(1)
    • 18.8 mm(1)
    • 18.901 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(1)
    • 19.201 mm(1)
    • 19.225 mm(1)
    • 19.25 mm(1)
    • 19.276 mm(1)
    • 19.326 mm(1)
    • 19.35 mm(1)
    • 19.375 mm(1)
    • 19.451 mm(1)
    • 19.5 mm(1)
    • 19.651 mm(1)
    • 19.701 mm(1)
    • 19.85 mm(1)
    • 20.0 mm(1)
    • 20.026 mm(1)
    • 20.1 mm(1)
    • 20.25 mm(1)
    • 20.35 mm(1)
    • 20.5 mm(1)
    • 20.651 mm(1)
    • 20.701 mm(1)
    • 21.0 mm(1)
    • 21.1 mm(1)
    • 21.151 mm(1)
    • 21.201 mm(1)
    • 21.326 mm(1)
    • 21.425 mm(1)
    • 21.5 mm(1)
    • 21.701 mm(1)
    • 21.826 mm(1)
    • 22.0 mm(1)
    • 22.1 mm(1)
    • 22.151 mm(1)
    • 22.225 mm(1)
    • 22.451 mm(1)
    • 22.5 mm(1)
    • 22.625 mm(1)
    • 22.776 mm(1)
    • 23.0 mm(1)
    • 23.05 mm(1)
    • 23.1 mm(1)
    • 23.25 mm(1)
    • 23.3 mm(1)
    • 23.425 mm(1)
    • 23.5 mm(1)
    • 23.6 mm(1)
    • 23.701 mm(1)
    • 23.8 mm(1)
    • 24.0 mm(1)
    • 24.3 mm(1)
    • 24.5 mm(1)
    • 24.6 mm(1)
    • 24.701 mm(1)
    • 25.0 mm(1)
    • 25.076 mm(1)
    • 25.25 mm(1)
    • 25.3 mm(1)
    • 25.401 mm(1)
    • 25.5 mm(1)
    • 25.55 mm(1)
    • 25.6 mm(1)
    • 25.651 mm(1)
    • 25.675 mm(1)
    • 25.725 mm(1)
    • 25.75 mm(1)
    • 25.8 mm(1)
    • 26.0 mm(1)
    • 26.201 mm(1)
    • 26.3 mm(1)
    • 26.5 mm(1)
    • 26.526 mm(1)
    • 26.6 mm(1)
    • 26.701 mm(1)
    • 27.0 mm(1)
    • 27.5 mm(1)
    • 27.776 mm(1)
    • 28.0 mm(1)
    • 28.1 mm(1)
    • 28.175 mm(1)
    • 28.35 mm(1)
    • 28.5 mm(1)
    • 28.576 mm(1)
    • 29.0 mm(1)
    • 29.375 mm(1)
    • 29.5 mm(1)
    • 29.55 mm(1)
    • 29.725 mm(1)
    • 29.776 mm(1)
    • 30.0 mm(1)
    • 30.151 mm(1)
    • 30.5 mm(1)
    • 30.55 mm(1)
    • 30.951 mm(1)
    • 31.0 mm(1)
    • 31.151 mm(1)
    • 31.25 mm(1)
    • 31.5 mm(1)
    • 31.75 mm(1)
    • 32.0 mm(1)
    • 32.2 mm(1)
    • 32.35 mm(1)
    • 32.5 mm(1)
    • 32.551 mm(1)
    • 32.95 mm(1)
    • 33.0 mm(1)
    • 33.35 mm(1)
    • 33.4 mm(1)
    • 33.5 mm(1)
    • 33.725 mm(1)
    • 34.0 mm(1)
    • 34.125 mm(1)
    • 34.5 mm(1)
    • 34.926 mm(1)
    • 35.0 mm(1)
    • 35.5 mm(1)
    • 35.725 mm(1)
    • 36.0 mm(1)
    • 36.125 mm(1)
    • 36.5 mm(1)
    • 37.0 mm(1)
    • 37.301 mm(1)
    • 37.5 mm(1)
    • 38.0 mm(1)
    • 38.1 mm(1)
    • 38.45 mm(1)
    • 38.5 mm(1)
    • 39.0 mm(1)
    • 39.2 mm(1)
    • 39.5 mm(1)
    • 39.75 mm(1)
    • 40.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 14.5 mm(1)
    • 15.8 mm(1)
    • 18.0 mm(1)
    • 18.2 mm(1)
    • 19.85 mm(1)
    • 22.0 mm(1)
    • 24.0 mm(1)
    • 26.0 mm(1)
    • 28.0 mm(1)
    • 30.0 mm(1)
    • 32.0 mm(1)
    • 36.0 mm(1)
    • 40.0 mm(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.572 in(1)
    • 0.622 in(1)
    • 0.709 in(1)
    • 0.717 in(1)
    • 0.781 in(1)
    • 0.866 in(1)
    • 0.946 in(1)
    • 1.024 in(1)
    • 1.102 in(1)
    • 1.181 in(1)
    • 1.26 in(1)
    • 1.417 in(1)
    • 1.575 in(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Connection Style
    Connection Style
    • KSEM Chamfer Ring Connection (29)
    • Whistle Drive 2 (2)
    • Whistle Notch 2 (11)
    Number of Flutes
    Number of Flutes
    • 2 (42)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (42)
    • 3.0 (25)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(7)
    • 1.655 in(8)
    • 1.891 in(5)
    • 1.969 in(4)
    • 2.126 in(4)
    • 2.205 in(1)
    • 4.22 in(2)
    • 4.305 in(1)
    • 4.315 in(1)
    • 4.642 in(1)
    • 4.734 in(1)
    • 4.825 in(1)
    • 5.074 in(1)
    • 5.165 in(1)
    • 5.257 in(1)
    • 5.348 in(1)
    • 6.109 in(1)
    • 6.488 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(7)
    • 42.0 mm(8)
    • 48.0 mm(5)
    • 50.0 mm(4)
    • 54.0 mm(4)
    • 56.0 mm(1)
    • 107.176 mm(1)
    • 107.2 mm(1)
    • 109.351 mm(1)
    • 109.601 mm(1)
    • 117.9 mm(1)
    • 120.226 mm(1)
    • 122.551 mm(1)
    • 128.875 mm(1)
    • 131.201 mm(1)
    • 133.525 mm(1)
    • 135.85 mm(1)
    • 155.175 mm(1)
    • 164.8 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(12)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(12)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(12)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(12)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CS5 (29)
    • KC7015 (46)
    • KC7030 (11)
    • KC7135 (13)
    • KC7140 (17)
    • KC7215 (30)
    • KC7235 (13)
    • KC7315 (46)
    • KC7320 (2)
    • KC7410 (13)
    • KCMS15 (13)
    • KCMS35 (13)
    • KCPM45 (13)
    • KMF (29)
    • YYMISF (1)
    Hand Of Tool
    Hand Of Tool
    • R (42)
    Wiper Insert
    Wiper Insert
    • N (12)
    Drill Type
    Drill Type
    • 86-02 (13)
    • 86-04 (29)
    Countersunk Angle
    Countersunk Angle
    • 41.0 (29)
    • 45.0 (29)
    Countersunk Angle MinkomuCountersunk Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • COUNTERBORE/COUNTERSINK MISC (29)
    • KSEM DRILL (13)
    • T-TRIANGLE 60 (25)
    Point Angle
    Point Angle
    • 140.0 (13)
    • 150.0 (13)
    • 180.0 (13)
    Point Angle MinkomuPoint Angle Max
    insertGeometry
    Shape
    Shape
    • T-TRIANGLE 60 (12)
    Insert IC Size
    Insert IC Size
    • 5.551 mm(3)
    • 6.351 mm(3)
    • 7.95 mm(3)
    • 9.525 mm(3)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.219 in(3)
    • 0.25 in(3)
    • 0.313 in(3)
    • 0.375 in(3)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 9.625 mm(3)
    • 11.0 mm(3)
    • 13.75 mm(3)
    • 16.5 mm(3)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.379 in(3)
    • 0.433 in(3)
    • 0.541 in(3)
    • 0.65 in(3)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (12)
    Cutting Tool Material
    Cutting Tool Material
    • H W (12)
    Tolerance Class
    Tolerance Class
    • G (12)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (42)
    Back-End Diameter
    Back-End Diameter
    • 12.5 mm(1)
    • 13.0 mm(1)
    • 13.5 mm(1)
    • 14.0 mm(1)
    • 14.5 mm(1)
    • 15.0 mm(1)
    • 15.5 mm(1)
    • 16.0 mm(3)
    • 16.5 mm(1)
    • 17.0 mm(1)
    • 17.5 mm(1)
    • 18.0 mm(1)
    • 18.5 mm(1)
    • 19.0 mm(1)
    • 19.5 mm(1)
    • 20.0 mm(3)
    • 20.5 mm(1)
    • 21.0 mm(1)
    • 21.5 mm(1)
    • 22.0 mm(1)
    • 22.5 mm(1)
    • 23.0 mm(1)
    • 23.5 mm(1)
    • 24.0 mm(1)
    • 24.5 mm(1)
    • 25.0 mm(4)
    • 25.5 mm(1)
    • 26.0 mm(1)
    • 26.5 mm(1)
    • 32.0 mm(4)
    • 50.0 mm(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.492 in(1)
    • 0.512 in(1)
    • 0.531 in(1)
    • 0.551 in(1)
    • 0.572 in(1)
    • 0.591 in(1)
    • 0.61 in(1)
    • 0.63 in(3)
    • 0.65 in(1)
    • 0.669 in(1)
    • 0.69 in(1)
    • 0.709 in(1)
    • 0.728 in(1)
    • 0.748 in(1)
    • 0.768 in(1)
    • 0.787 in(3)
    • 0.807 in(1)
    • 0.828 in(1)
    • 0.846 in(1)
    • 0.866 in(1)
    • 0.886 in(1)
    • 0.906 in(1)
    • 0.925 in(1)
    • 0.946 in(1)
    • 0.965 in(1)
    • 0.984 in(4)
    • 1.004 in(1)
    • 1.024 in(1)
    • 1.043 in(1)
    • 1.26 in(4)
    • 1.969 in(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    KSEM™ • Kroužky pro srážení hran • Metrické
    (29)

    KSEM™ • Kroužky pro srážení hran • Metrické

    KSEM™ • Vrtací těleso se sražením 45° • 1 x D • Stopka WD • Metrické
    (2)

    KSEM™ • Vrtací těleso se sražením 45° • 1 x D • Stopka WD • Metrické

    KSEM™ • Srážecí břitové destičky • Geometrie TPGX- GD
    (12)

    KSEM™ • Srážecí břitové destičky • Geometrie TPGX- GD

    KSEM™ • Vrtací těleso se sražením 45° • 1 x D • Stopka WN • Metrické
    (11)

    KSEM™ • Vrtací těleso se sražením 45° • 1 x D • Stopka WN • Metrické

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?