Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Břitové destičky KSEM PLUS™

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (107)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(107)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(107)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(107)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(107)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(107)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(98)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(98)
    • M Stainless Steel (106)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(106)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(106)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(92)
    • K Cast Iron (88)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(88)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(88)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(88)
    • N Non-Ferrous Materials (83)
      • N1
        Wrought Aluminum (82)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(82)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(82)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (68)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (77)
      • N6
        Carbon, Graphite Composites, CFRP (68)
      • N7
        MMC's (64)
    • S High-Temp Alloys (92)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(92)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(92)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(92)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(92)
    • H Hardened Materials (5)
      • H1
        Hardened Materials 44-48 HRC(5)
    Vybrat první volbu
    • BR (4)
    • CN (102)
    • DE (102)
    • GB (49)
    • IN (15)
    • SG (58)
    • US (102)
    Cutting Diameter
    Cutting Diameter
    • 0.512 in(1)
    • 0.551 in(1)
    • 0.591 in(1)
    • 0.63 in(1)
    • 0.669 in(1)
    • 0.709 in(1)
    • 0.748 in(1)
    • 0.787 in(1)
    • 0.828 in(1)
    • 0.866 in(1)
    • 0.906 in(1)
    • 0.946 in(1)
    • 0.984 in(1)
    • 1.024 in(1)
    • 1.063 in(1)
    • 1.102 in(1)
    • 1.143 in(1)
    • 1.181 in(1)
    • 1.22 in(1)
    • 1.26 in(1)
    • 1.299 in(1)
    • 1.339 in(1)
    • 1.379 in(1)
    • 1.417 in(1)
    • 1.457 in(1)
    • 1.496 in(1)
    • 1.536 in(1)
    • 1.575 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 13.0 mm(1)
    • 14.0 mm(1)
    • 15.0 mm(1)
    • 16.0 mm(1)
    • 17.0 mm(1)
    • 18.0 mm(1)
    • 19.0 mm(1)
    • 20.0 mm(1)
    • 21.0 mm(1)
    • 22.0 mm(1)
    • 23.0 mm(1)
    • 24.0 mm(1)
    • 25.0 mm(1)
    • 26.0 mm(1)
    • 27.0 mm(1)
    • 28.0 mm(1)
    • 29.0 mm(1)
    • 30.0 mm(1)
    • 31.0 mm(1)
    • 32.0 mm(1)
    • 33.0 mm(1)
    • 34.0 mm(1)
    • 35.0 mm(1)
    • 36.0 mm(1)
    • 37.0 mm(1)
    • 38.0 mm(1)
    • 39.0 mm(1)
    • 40.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Condition
    Cutting Condition
    • Interrupted (74)
    • Stable (79)
    • Unstable (74)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (28)
    • 2.0 (34)
    • 3.0 (45)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(4)
    • 0.031 in(45)
    • 0.039 in(6)
    • 0.047 in(12)
    • 0.063 in(6)
    • 0.079 in(6)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(4)
    • 0.8 mm(45)
    • 1.0 mm(6)
    • 1.201 mm(12)
    • 1.6 mm(6)
    • 2.0 mm(6)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC7140 (15)
    • KC7225 (1)
    • KC7315 (28)
    • KCU25 (29)
    • KCU40 (34)
    frontEnd
    Insert Shape
    Insert Shape
    • B-PARALLELOGRAM 82 (4)
    • D-DIAMOND/RHOMBIC 90 (30)
    • KSEM DRILL (28)
    • X-TRIGON 84 (45)
    Point Angle
    Point Angle
    • 140.0 (28)
    Point Angle MinkomuPoint Angle Max
    insertGeometry
    Shape
    Shape
    • B-PARALLELOGRAM 82 (4)
    • D-DIAMOND/RHOMBIC 90 (30)
    • KSEM DRILL (28)
    • X-TRIGON 84 (45)
    Insert IC Size
    Insert IC Size
    • 8.0 mm(14)
    • 10.0 mm(15)
    • 12.0 mm(10)
    • 15.0 mm(10)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.315 in(14)
    • 0.394 in(15)
    • 0.473 in(10)
    • 0.591 in(10)
    Insert IC Size MinkomuInsert IC Size Max
    Insert Seat Size
    Insert Seat Size
    • 1 (3)
    • 10 (4)
    • 2 (1)
    • 3 (3)
    • 4 (2)
    • 5 (2)
    • 6 (2)
    • 7 (2)
    • 8 (2)
    • 9 (4)
    • A (1)
    • B (1)
    • C (1)
    Cutting Edge Length
    Cutting Edge Length
    • 5.301 mm(10)
    • 6.625 mm(15)
    • 7.95 mm(10)
    • 9.925 mm(10)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.209 in(10)
    • 0.261 in(15)
    • 0.313 in(10)
    • 0.391 in(10)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • DS (28)
    • GD (2)
    • HP (28)
    • HPF (5)
    • LD (1)
    • MD (15)
    Cutting Diameter Insert
    Cutting Diameter Insert
    • 0.512 in(1)
    • 0.551 in(1)
    • 0.591 in(1)
    • 0.63 in(1)
    • 0.669 in(1)
    • 0.709 in(1)
    • 0.748 in(1)
    • 0.787 in(1)
    • 0.828 in(1)
    • 0.866 in(1)
    • 0.906 in(1)
    • 0.946 in(1)
    • 0.984 in(1)
    • 1.024 in(1)
    • 1.063 in(1)
    • 1.102 in(1)
    • 1.143 in(1)
    • 1.181 in(1)
    • 1.22 in(1)
    • 1.26 in(1)
    • 1.299 in(1)
    • 1.339 in(1)
    • 1.379 in(1)
    • 1.417 in(1)
    • 1.457 in(1)
    • 1.496 in(1)
    • 1.536 in(1)
    • 1.575 in(1)
    Cutting Diameter Insert MinkomuCutting Diameter Insert Max
    Cutting Diameter Insert
    Cutting Diameter Insert
    • 13.0 mm(1)
    • 14.0 mm(1)
    • 15.0 mm(1)
    • 16.0 mm(1)
    • 17.0 mm(1)
    • 18.0 mm(1)
    • 19.0 mm(1)
    • 20.0 mm(1)
    • 21.0 mm(1)
    • 22.0 mm(1)
    • 23.0 mm(1)
    • 24.0 mm(1)
    • 25.0 mm(1)
    • 26.0 mm(1)
    • 27.0 mm(1)
    • 28.0 mm(1)
    • 29.0 mm(1)
    • 30.0 mm(1)
    • 31.0 mm(1)
    • 32.0 mm(1)
    • 33.0 mm(1)
    • 34.0 mm(1)
    • 35.0 mm(1)
    • 36.0 mm(1)
    • 37.0 mm(1)
    • 38.0 mm(1)
    • 39.0 mm(1)
    • 40.0 mm(1)
    Cutting Diameter Insert MinkomuCutting Diameter Insert Max
    No filters matching ""

    Boční břitové destičky Drill Fix DFT (hlavy A1, průměry nad 31 mm)

    (45)Boční břitové destičky Drill Fix DFT (hlavy A1, průměry nad 31 mm)

    Boční břitové destičky Drill Fix DFC (hlavy B1)

    (30)Boční břitové destičky Drill Fix DFC (hlavy B1)

    Středové břitové destičky KSEM PLUS™

    (28)Středové břitové destičky KSEM PLUS™

    Boční břitové destičky Drill Fix DFR (hlavy A1, 28 mm až 31 mm)

    (4)Boční břitové destičky Drill Fix DFR (hlavy A1, 28 mm až 31 mm)
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?