Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KMH Drills • Hard Materials

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (76)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(76)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(76)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(76)
    • K Cast Iron (76)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(76)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(76)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(76)
    • H Hardened Materials (76)
      • H1
        Hardened Materials 44-48 HRC(76)
      • H2
        Hardened Materials 48-55 HRC(76)
      • H3
        Hardened Materials 56-60 HRC(76)
      • H4
        Hardened Materials >60 HRC(76)
    Applications
    Applications
    • CornerStyle Chamfer DrillingCornerStyle Chamfer Drilling (76)
    • DrillingDrilling (76)
    • Stacked Plates DrillingStacked Plates Drilling (76)
    Cutting Diameter
    Cutting Diameter
    • 0.098 in(1)
    • 0.11 in(1)
    • 0.114 in(1)
    • 0.119 in(2)
    • 0.125 in(2)
    • 0.13 in(1)
    • 0.134 in(1)
    • 0.136 in(1)
    • 0.138 in(2)
    • 0.15 in(1)
    • 0.157 in(2)
    • 0.161 in(1)
    • 0.165 in(2)
    • 0.169 in(2)
    • 0.177 in(2)
    • 0.189 in(1)
    • 0.193 in(1)
    • 0.197 in(2)
    • 0.201 in(1)
    • 0.206 in(1)
    • 0.217 in(2)
    • 0.221 in(1)
    • 0.228 in(1)
    • 0.237 in(2)
    • 0.25 in(2)
    • 0.256 in(1)
    • 0.268 in(1)
    • 0.272 in(1)
    • 0.276 in(2)
    • 0.28 in(1)
    • 0.315 in(2)
    • 0.335 in(2)
    • 0.339 in(1)
    • 0.354 in(2)
    • 0.374 in(1)
    • 0.386 in(1)
    • 0.394 in(2)
    • 0.402 in(2)
    • 0.41 in(2)
    • 0.414 in(2)
    • 0.425 in(1)
    • 0.433 in(1)
    • 0.437 in(1)
    • 0.453 in(1)
    • 0.465 in(1)
    • 0.473 in(2)
    • 0.492 in(1)
    • 0.5 in(1)
    • 0.504 in(1)
    • 0.512 in(1)
    • 0.531 in(1)
    • 0.551 in(2)
    • 0.572 in(1)
    • 0.61 in(1)
    • 0.63 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 2.5 mm(1)
    • 2.801 mm(1)
    • 2.901 mm(1)
    • 3.0 mm(2)
    • 3.176 mm(2)
    • 3.301 mm(1)
    • 3.401 mm(1)
    • 3.45 mm(1)
    • 3.5 mm(2)
    • 3.801 mm(1)
    • 4.0 mm(2)
    • 4.101 mm(1)
    • 4.2 mm(2)
    • 4.3 mm(2)
    • 4.5 mm(2)
    • 4.801 mm(1)
    • 4.9 mm(1)
    • 5.0 mm(2)
    • 5.101 mm(1)
    • 5.2 mm(1)
    • 5.5 mm(2)
    • 5.601 mm(1)
    • 5.801 mm(1)
    • 6.0 mm(2)
    • 6.351 mm(2)
    • 6.5 mm(1)
    • 6.801 mm(1)
    • 6.9 mm(1)
    • 7.0 mm(2)
    • 7.101 mm(1)
    • 8.0 mm(2)
    • 8.5 mm(2)
    • 8.6 mm(1)
    • 9.0 mm(2)
    • 9.5 mm(1)
    • 9.8 mm(1)
    • 10.0 mm(2)
    • 10.201 mm(2)
    • 10.4 mm(2)
    • 10.5 mm(2)
    • 10.8 mm(1)
    • 11.0 mm(1)
    • 11.101 mm(1)
    • 11.5 mm(1)
    • 11.8 mm(1)
    • 12.0 mm(2)
    • 12.5 mm(1)
    • 12.701 mm(1)
    • 12.8 mm(1)
    • 13.0 mm(1)
    • 13.5 mm(1)
    • 14.0 mm(2)
    • 14.5 mm(1)
    • 15.5 mm(1)
    • 16.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 9.0 mm(8)
    • 14.0 mm(8)
    • 17.0 mm(12)
    • 19.0 mm(3)
    • 20.0 mm(6)
    • 24.0 mm(6)
    • 29.0 mm(5)
    • 35.0 mm(10)
    • 38.0 mm(1)
    • 40.0 mm(8)
    • 43.0 mm(6)
    • 45.0 mm(3)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.354 in(8)
    • 0.551 in(8)
    • 0.669 in(12)
    • 0.748 in(3)
    • 0.787 in(6)
    • 0.946 in(6)
    • 1.143 in(5)
    • 1.379 in(10)
    • 1.496 in(1)
    • 1.575 in(8)
    • 1.693 in(6)
    • 1.772 in(3)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 0.63 in(3)
    • 0.787 in(9)
    • 0.946 in(9)
    • 1.102 in(12)
    • 1.339 in(7)
    • 1.417 in(1)
    • 1.614 in(3)
    • 1.85 in(9)
    • 2.165 in(13)
    • 2.362 in(7)
    • 2.559 in(3)
    Reach MinkomuReach Max
    Reach
    Reach
    • 16.0 mm(3)
    • 20.0 mm(9)
    • 24.0 mm(9)
    • 28.0 mm(12)
    • 34.0 mm(7)
    • 36.0 mm(1)
    • 41.0 mm(3)
    • 47.0 mm(9)
    • 55.0 mm(13)
    • 60.0 mm(7)
    • 65.0 mm(3)
    Reach MinkomuReach Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.969 in(3)
    • 2.441 in(9)
    • 2.598 in(22)
    • 3.11 in(10)
    • 3.504 in(9)
    • 4.016 in(13)
    • 4.213 in(7)
    • 4.529 in(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 50.0 mm(3)
    • 62.0 mm(9)
    • 66.0 mm(22)
    • 79.0 mm(10)
    • 89.0 mm(9)
    • 102.0 mm(13)
    • 107.0 mm(7)
    • 115.0 mm(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Coating
    Coating
    • AlTiN (43)
    • AlTiSiN (30)
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KCH10 (33)
    • KCH15 (43)
    frontEnd
    Point Angle
    Point Angle
    • 138.0 (43)
    • 142.0 (33)
    Point Angle MinkomuPoint Angle Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 3.0 mm(2)
    • 4.0 mm(1)
    • 6.0 mm(31)
    • 8.0 mm(10)
    • 10.0 mm(9)
    • 12.0 mm(13)
    • 14.0 mm(7)
    • 16.0 mm(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.119 in(2)
    • 0.157 in(1)
    • 0.237 in(31)
    • 0.315 in(10)
    • 0.394 in(9)
    • 0.473 in(13)
    • 0.551 in(7)
    • 0.63 in(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""

    B941A (~3 x D) • KCH10 • A-Shank • KMH Drills

    (33)B941A (~3 x D) • KCH10 • A-Shank • KMH Drills

    B951A (~3 x D) • KCH15 • A-Shank • KMH Drills

    (43)B951A (~3 x D) • KCH15 • A-Shank • KMH Drills
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?