Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KDM • RD.X07...

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (36)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(30)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(30)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(30)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(30)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(36)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(30)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(30)
    • M Stainless Steel (30)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(30)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(30)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(30)
    • K Cast Iron (32)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(32)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(32)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(32)
    • N Non-Ferrous Materials (26)
      • N1
        Wrought Aluminum (26)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(26)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(26)
    • S High-Temp Alloys (28)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(28)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(28)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(28)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(28)
    • H Hardened Materials (30)
      • H1
        Hardened Materials 44-48 HRC(30)
    Applications
    Applications
    • Face MillingFace Milling (18)
    • PocketPocket (18)
    • Pocket HelicalPocket Helical (18)
    • Pocket MillingPocket Milling (18)
    • Profile MillingProfile Milling (18)
    • RampingRamping (18)
    • Shoulder Ball NoseShoulder Ball Nose (18)
    • Shoulder MillingShoulder Milling (18)
    Cutting Diameter
    Cutting Diameter
    • 0.197 in(2)
    • 0.224 in(2)
    • 0.315 in(6)
    • 0.35 in(1)
    • 0.475 in(2)
    • 0.512 in(1)
    • 0.709 in(1)
    • 0.724 in(1)
    • 0.906 in(1)
    • 1.102 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 5.0 mm(2)
    • 5.7 mm(2)
    • 8.0 mm(6)
    • 8.875 mm(1)
    • 12.05 mm(2)
    • 13.0 mm(1)
    • 18.0 mm(1)
    • 18.401 mm(1)
    • 23.0 mm(1)
    • 28.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 12.0 mm(2)
    • 12.701 mm(2)
    • 15.0 mm(6)
    • 15.875 mm(1)
    • 19.05 mm(2)
    • 20.0 mm(1)
    • 25.0 mm(1)
    • 25.401 mm(1)
    • 30.0 mm(1)
    • 35.0 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.473 in(2)
    • 0.5 in(2)
    • 0.591 in(6)
    • 0.625 in(1)
    • 0.75 in(2)
    • 0.787 in(1)
    • 0.984 in(1)
    • 1.0 in(1)
    • 1.181 in(1)
    • 1.379 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 3.5 mm(18)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.138 in(18)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.709 in(1)
    • 0.75 in(1)
    • 0.787 in(1)
    • 0.906 in(2)
    • 0.984 in(1)
    • 1.181 in(1)
    • 1.379 in(1)
    • 1.575 in(3)
    • 1.693 in(2)
    • 2.0 in(3)
    • 4.0 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 18.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(1)
    • 23.0 mm(2)
    • 25.0 mm(1)
    • 30.0 mm(1)
    • 35.0 mm(1)
    • 40.0 mm(3)
    • 43.0 mm(2)
    • 50.801 mm(3)
    • 101.601 mm(2)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (18)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Screw-On Connection (9)
    • Weldon (9)
    Number of Flutes
    Number of Flutes
    • 1 (1)
    • 2 (9)
    • 3 (3)
    • 4 (2)
    • 5 (2)
    • 6 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.287 in(1)
    • 1.602 in(2)
    • 1.799 in(2)
    • 1.969 in(1)
    • 2.244 in(1)
    • 2.657 in(2)
    • 3.543 in(1)
    • 3.971 in(2)
    • 4.05 in(1)
    • 4.331 in(1)
    • 5.984 in(1)
    • 6.28 in(2)
    • 6.969 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 32.7 mm(1)
    • 40.7 mm(2)
    • 45.7 mm(2)
    • 50.0 mm(1)
    • 57.0 mm(1)
    • 67.5 mm(2)
    • 90.0 mm(1)
    • 100.851 mm(2)
    • 102.875 mm(1)
    • 110.0 mm(1)
    • 152.0 mm(1)
    • 159.5 mm(2)
    • 177.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.098 in(1)
    • 0.138 in(28)
    • 0.197 in(4)
    • 0.237 in(3)
    • 0.315 in(2)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 2.5 mm(1)
    • 3.5 mm(28)
    • 5.0 mm(4)
    • 6.0 mm(3)
    • 8.0 mm(2)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K110M (17)
    • KC510M (22)
    • KC522M (19)
    • KC525M (18)
    • KC715M (18)
    • KC725M (24)
    • KCKP10 (20)
    • KCPM20 (17)
    • KTPK20 (18)
    Hand Of Tool
    Hand Of Tool
    • R (18)
    Wiper Insert
    Wiper Insert
    • N (20)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 2.5 (1)
    • 3.0 (1)
    • 3.5 (1)
    • 4.0 (1)
    • 4.5 (7)
    • 5.5 (1)
    • 6.0 (1)
    • 7.0 (1)
    • 9.5 (2)
    • 10.0 (2)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • R-ROUND (20)
    Insert IC Size
    Insert IC Size
    • 5.0 mm(1)
    • 7.0 mm(10)
    • 10.0 mm(4)
    • 12.0 mm(3)
    • 16.0 mm(2)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.197 in(1)
    • 0.276 in(10)
    • 0.394 in(4)
    • 0.473 in(3)
    • 0.63 in(2)
    Insert IC Size MinkomuInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • LN (10)
    • LP (10)
    Cutting Tool Material
    Cutting Tool Material
    • H W (20)
    Tolerance Class
    Tolerance Class
    • H (19)
    • P (1)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (9)
    • SCREW-ON (9)
    Back-End Diameter
    Back-End Diameter
    • 9.8 mm(1)
    • 13.0 mm(4)
    • 15.875 mm(2)
    • 16.0 mm(2)
    • 18.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(1)
    • 21.0 mm(1)
    • 25.0 mm(1)
    • 25.401 mm(2)
    • 29.0 mm(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.386 in(1)
    • 0.512 in(4)
    • 0.625 in(2)
    • 0.63 in(2)
    • 0.709 in(1)
    • 0.75 in(1)
    • 0.787 in(1)
    • 0.828 in(1)
    • 0.984 in(1)
    • 1.0 in(2)
    • 1.143 in(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""

    KDM • Screw-On End Mills • RD.X07... • Inch

    (9)KDM • Screw-On End Mills • RD.X07... • Inch

    KDM • Stopkové frézy se stopkou Weldon® • RD.X07... • Metrické

    (4)KDM • Stopkové frézy se stopkou Weldon® • RD.X07... • Metrické

    KDM • Weldon® Shank End Mills • RD.X07... • Inch

    (5)KDM • Weldon® Shank End Mills • RD.X07... • Inch

    Round Inserts for KDM • RDHX-LP

    (10)Round Inserts for KDM • RDHX-LP

    Round Inserts for KDM • RDHX-LN

    (9)Round Inserts for KDM • RDHX-LN

    Round Inserts for KDM • RDPX-LN

    (1)Round Inserts for KDM • RDPX-LN
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?