Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KDMR Platform

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (42)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(42)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(42)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(42)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(42)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(42)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(42)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(42)
    • M Stainless Steel (42)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(42)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(42)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(42)
    Applications
    Applications
    • DrillingDrilling (34)
    • PocketPocket (34)
    • Pocket HelicalPocket Helical (34)
    • Pocket MillingPocket Milling (34)
    • Pocket Plunge MillingPocket Plunge Milling (34)
    • RampingRamping (34)
    • Slot MillingSlot Milling (34)
    • Slot Square EndSlot Square End (34)
    Cutting Diameter
    Cutting Diameter
    • 0.63 in(5)
    • 0.669 in(2)
    • 0.787 in(5)
    • 0.828 in(2)
    • 0.984 in(4)
    • 1.0 in(1)
    • 1.024 in(3)
    • 1.25 in(1)
    • 1.26 in(4)
    • 1.299 in(1)
    • 1.5 in(1)
    • 1.575 in(3)
    • 1.969 in(1)
    • 1.984 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 16.0 mm(5)
    • 17.0 mm(2)
    • 20.0 mm(5)
    • 21.0 mm(2)
    • 25.0 mm(4)
    • 25.401 mm(1)
    • 26.0 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(4)
    • 33.0 mm(1)
    • 38.1 mm(1)
    • 40.0 mm(3)
    • 50.0 mm(1)
    • 50.401 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 19.0 mm(7)
    • 22.0 mm(7)
    • 28.0 mm(8)
    • 36.0 mm(6)
    • 42.0 mm(4)
    • 54.0 mm(2)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.748 in(7)
    • 0.866 in(7)
    • 1.102 in(8)
    • 1.417 in(6)
    • 1.655 in(4)
    • 2.126 in(2)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.195 in(1)
    • 1.22 in(4)
    • 1.339 in(1)
    • 1.35 in(1)
    • 1.379 in(3)
    • 1.575 in(6)
    • 1.969 in(4)
    • 2.008 in(1)
    • 2.087 in(1)
    • 2.126 in(1)
    • 2.165 in(3)
    • 2.402 in(1)
    • 2.48 in(1)
    • 2.712 in(1)
    • 2.757 in(2)
    • 3.15 in(2)
    • 3.543 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 30.35 mm(1)
    • 31.0 mm(4)
    • 34.0 mm(1)
    • 34.301 mm(1)
    • 35.0 mm(3)
    • 40.0 mm(6)
    • 50.0 mm(4)
    • 51.0 mm(1)
    • 53.0 mm(1)
    • 54.0 mm(1)
    • 55.0 mm(3)
    • 61.0 mm(1)
    • 63.0 mm(1)
    • 68.875 mm(1)
    • 70.0 mm(2)
    • 80.0 mm(2)
    • 90.0 mm(1)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (34)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Straight-Cylindrical (27)
    • Weldon (7)
    Number of Flutes
    Number of Flutes
    • 2 (34)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.15 in(1)
    • 3.346 in(1)
    • 3.74 in(2)
    • 4.331 in(1)
    • 4.699 in(1)
    • 4.724 in(2)
    • 5.091 in(1)
    • 5.118 in(3)
    • 5.486 in(1)
    • 5.513 in(4)
    • 5.859 in(1)
    • 5.906 in(3)
    • 6.26 in(1)
    • 6.299 in(1)
    • 6.649 in(1)
    • 6.694 in(1)
    • 7.087 in(1)
    • 7.48 in(2)
    • 7.875 in(2)
    • 8.661 in(2)
    • 9.055 in(1)
    • 9.449 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 80.0 mm(1)
    • 85.0 mm(1)
    • 95.0 mm(2)
    • 110.0 mm(1)
    • 119.351 mm(1)
    • 120.0 mm(2)
    • 129.3 mm(1)
    • 130.0 mm(3)
    • 139.35 mm(1)
    • 140.0 mm(4)
    • 148.8 mm(1)
    • 150.0 mm(3)
    • 159.0 mm(1)
    • 160.0 mm(1)
    • 168.875 mm(1)
    • 170.0 mm(1)
    • 180.0 mm(1)
    • 190.0 mm(2)
    • 200.0 mm(2)
    • 220.0 mm(2)
    • 230.0 mm(1)
    • 240.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC505M (34)
    • KC720M (42)
    Hand Of Tool
    Hand Of Tool
    • R (34)
    Wiper Insert
    Wiper Insert
    • N (8)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 8.0 (34)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • L-RECTANGLE 90 (38)
    • X-PARALLELOGRAM 80 (38)
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • L-RECTANGLE 90 (4)
    • X-PARALLELOGRAM 80 (4)
    Cutting Edge Length
    Cutting Edge Length
    • 8.5 mm(1)
    • 8.701 mm(1)
    • 10.201 mm(1)
    • 10.701 mm(1)
    • 13.201 mm(2)
    • 16.7 mm(2)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.335 in(1)
    • 0.343 in(1)
    • 0.402 in(1)
    • 0.421 in(1)
    • 0.52 in(2)
    • 0.657 in(2)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • LD (4)
    • LF (4)
    Cutting Tool Material
    Cutting Tool Material
    • H W (8)
    Tolerance Class
    Tolerance Class
    • M (8)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (34)
    Back-End Diameter
    Back-End Diameter
    • 15.875 mm(1)
    • 16.0 mm(6)
    • 19.05 mm(1)
    • 20.0 mm(6)
    • 25.0 mm(7)
    • 25.401 mm(1)
    • 31.75 mm(2)
    • 32.0 mm(8)
    • 38.1 mm(1)
    • 40.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.625 in(1)
    • 0.63 in(6)
    • 0.75 in(1)
    • 0.787 in(6)
    • 0.984 in(7)
    • 1.0 in(1)
    • 1.25 in(2)
    • 1.26 in(8)
    • 1.5 in(1)
    • 1.575 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    KDMR • Válcová stopka • Multifunkční • Metrické
    (9)

    KDMR • Válcová stopka • Multifunkční • Metrické

    KDMR • Válcová stopka • Multifunkční • Metrické
    (4)

    KDMR • Válcová stopka • Multifunkční • Metrické

    KDMR • Válcová stopka • Dlouhá stopka • Metrické
    (15)

    KDMR • Válcová stopka • Dlouhá stopka • Metrické

    KDMR • Cylindrical Shank • Multifunctional • Inch
    (6)

    KDMR • Cylindrical Shank • Multifunctional • Inch

    Břitové destičky pro KDMR • JOMT-LF
    (4)

    Břitové destičky pro KDMR • JOMT-LF

    Insert for KDMR • GOMT-LD
    (4)

    Insert for KDMR • GOMT-LD

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?