Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Cutters Mill 1-18™ • Inch

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (50)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(50)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(50)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(50)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(50)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(50)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(50)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(50)
    • M Stainless Steel (50)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(50)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(50)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(50)
    • K Cast Iron (50)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(50)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(50)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(50)
    • N Non-Ferrous Materials (50)
      • N1
        Wrought Aluminum (50)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(50)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(50)
    • S High-Temp Alloys (50)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(50)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(50)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(50)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(50)
    • H Hardened Materials (50)
      • H1
        Hardened Materials 44-48 HRC(50)
    Applications
    Applications
    • Face MillingFace Milling (51)
    • PocketPocket (47)
    • Pocket HelicalPocket Helical (47)
    • Pocket MillingPocket Milling (47)
    • RampingRamping (47)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (4)
    • Shoulder MillingShoulder Milling (51)
    • Shoulder RoughingShoulder Roughing (7)
    • Shoulder Square EndShoulder Square End (47)
    • Slot MillingSlot Milling (38)
    • Slot Square EndSlot Square End (38)
    Cutting Diameter
    Cutting Diameter
    • 0.969 in(1)
    • 1.0 in(9)
    • 1.252 in(9)
    • 1.5 in(8)
    • 1.504 in(1)
    • 2.0 in(8)
    • 2.5 in(3)
    • 3.0 in(6)
    • 4.0 in(2)
    • 5.0 in(1)
    • 6.0 in(2)
    • 8.0 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 24.6 mm(1)
    • 25.401 mm(9)
    • 31.8 mm(9)
    • 38.1 mm(8)
    • 38.2 mm(1)
    • 50.801 mm(8)
    • 63.5 mm(3)
    • 76.2 mm(6)
    • 101.601 mm(2)
    • 127.0 mm(1)
    • 152.4 mm(2)
    • 203.201 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 15.976 mm(2)
    • 16.2 mm(2)
    • 16.401 mm(6)
    • 17.401 mm(6)
    • 17.5 mm(4)
    • 17.6 mm(3)
    • 17.7 mm(5)
    • 17.901 mm(4)
    • 18.0 mm(19)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.629 in(2)
    • 0.638 in(2)
    • 0.646 in(6)
    • 0.685 in(6)
    • 0.69 in(4)
    • 0.694 in(3)
    • 0.698 in(5)
    • 0.705 in(4)
    • 0.709 in(19)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.575 in(10)
    • 1.625 in(1)
    • 1.688 in(1)
    • 1.75 in(4)
    • 1.752 in(5)
    • 2.0 in(7)
    • 2.188 in(1)
    • 2.189 in(1)
    • 2.25 in(4)
    • 2.253 in(1)
    • 2.5 in(1)
    • 2.625 in(1)
    • 3.0 in(2)
    • 3.688 in(1)
    • 3.75 in(3)
    • 4.187 in(1)
    • 4.188 in(1)
    • 4.25 in(3)
    • 4.252 in(3)
    Reach MinkomuReach Max
    Reach
    Reach
    • 40.0 mm(10)
    • 41.276 mm(1)
    • 42.875 mm(1)
    • 44.45 mm(4)
    • 44.5 mm(5)
    • 50.801 mm(7)
    • 55.575 mm(1)
    • 55.6 mm(1)
    • 57.151 mm(4)
    • 57.2 mm(1)
    • 63.5 mm(1)
    • 66.675 mm(1)
    • 76.2 mm(2)
    • 93.676 mm(1)
    • 95.25 mm(3)
    • 106.351 mm(1)
    • 106.375 mm(1)
    • 107.95 mm(3)
    • 108.0 mm(3)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (21)
    • C-Bolt Circle (1)
    • CV-Caterpillar V-Flange In (6)
    • Straight-Cylindrical (6)
    • Weldon (17)
    Number of Flutes
    Number of Flutes
    • 12 (1)
    • 2 (12)
    • 3 (16)
    • 4 (7)
    • 5 (6)
    • 6 (2)
    • 7 (3)
    • 8 (3)
    • 9 (1)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (50)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(10)
    • 1.75 in(1)
    • 1.752 in(5)
    • 2.0 in(5)
    • 2.5 in(1)
    • 3.781 in(1)
    • 3.969 in(1)
    • 4.03 in(2)
    • 4.469 in(2)
    • 4.53 in(4)
    • 4.532 in(1)
    • 5.187 in(1)
    • 5.562 in(2)
    • 5.969 in(1)
    • 6.03 in(1)
    • 6.468 in(1)
    • 6.469 in(1)
    • 6.53 in(1)
    • 6.531 in(1)
    • 7.187 in(1)
    • 7.562 in(2)
    • 8.0 in(3)
    • 10.0 in(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(10)
    • 44.45 mm(1)
    • 44.5 mm(5)
    • 50.801 mm(5)
    • 63.5 mm(1)
    • 96.0 mm(1)
    • 100.801 mm(1)
    • 102.351 mm(2)
    • 113.5 mm(2)
    • 115.051 mm(4)
    • 115.101 mm(1)
    • 131.75 mm(1)
    • 141.275 mm(2)
    • 151.6 mm(1)
    • 153.15 mm(1)
    • 164.25 mm(1)
    • 164.3 mm(1)
    • 165.851 mm(1)
    • 165.9 mm(1)
    • 182.55 mm(1)
    • 192.076 mm(2)
    • 203.201 mm(3)
    • 254.0 mm(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(49)
    • 0.031 in(49)
    • 0.047 in(49)
    • 0.063 in(49)
    • 0.079 in(49)
    • 0.094 in(49)
    • 0.095 in(49)
    • 0.125 in(50)
    • 0.157 in(50)
    • 0.187 in(50)
    • 0.189 in(50)
    • 0.197 in(50)
    • 0.25 in(50)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(49)
    • 0.8 mm(49)
    • 1.201 mm(49)
    • 1.6 mm(49)
    • 2.0 mm(49)
    • 2.375 mm(49)
    • 2.401 mm(49)
    • 3.176 mm(50)
    • 4.0 mm(50)
    • 4.75 mm(50)
    • 4.801 mm(50)
    • 5.0 mm(50)
    • 6.351 mm(50)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(50)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(50)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC410M (50)
    • KC422M (50)
    • KC520M (50)
    • KC522M (50)
    • KC525M (50)
    • KC715M (50)
    • KC725M (50)
    • KC935M (49)
    • KCK15 (49)
    • KCK20B (50)
    • KCPK30 (50)
    • KCPM20 (50)
    • KCPM40 (50)
    • KCSM30 (50)
    • KCSM40 (50)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 1.0 (1)
    • 1.3 (2)
    • 1.6 (1)
    • 2.1 (2)
    • 3.0 (4)
    • 3.8 (3)
    • 5.2 (7)
    • 5.5 (1)
    • 7.5 (2)
    • 8.2 (7)
    • 10.9 (7)
    • 13.4 (2)
    • 14.0 (1)
    • 16.7 (6)
    • 17.7 (1)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • E-PARALLELOGRAM 70 (50)
    • X-PARALLELOGRAM 70 (50)
    Neck Diameter
    Neck Diameter
    • 0.852 in(1)
    • 0.882 in(9)
    • 1.133 in(9)
    • 1.383 in(9)
    • 1.843 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 21.651 mm(1)
    • 22.401 mm(9)
    • 28.75 mm(9)
    • 35.1 mm(9)
    • 46.801 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (23)
    • SHELL MILL (22)
    • TAPER SHANK (6)
    System Size
    System Size
    • CV40 (6)
    Back-End Diameter
    Back-End Diameter
    • 19.0 mm(1)
    • 19.05 mm(10)
    • 25.401 mm(14)
    • 31.701 mm(14)
    • 38.1 mm(4)
    • 44.45 mm(6)
    • 50.801 mm(1)
    • 63.526 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.748 in(1)
    • 0.75 in(10)
    • 1.0 in(14)
    • 1.248 in(14)
    • 1.5 in(4)
    • 1.75 in(6)
    • 2.0 in(1)
    • 2.501 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""

    Mill 1-18™ • End Mill • Cylindrical Shank • Inch

    (6)Mill 1-18™ • End Mill • Cylindrical Shank • Inch

    Mill 1-18™ • End Mill • Weldon Shank • For corner radii from .079" (2.4mm) to .25" (6.4mm) • Inch

    (4)Mill 1-18™ • End Mill • Weldon Shank • For corner radii from .079" (2.4mm) to .25" (6.4mm) • Inch

    Mill 1-18™ • End Mill • Weldon Shank • Inch

    (5)Mill 1-18™ • End Mill • Weldon Shank • Inch

    Mill 1-18™ • Shell Mill • Inch

    (15)Mill 1-18™ • Shell Mill • Inch

    Mill 1-18™ • Shell Mill • For Machining of Aluminum • Inch

    (3)Mill 1-18™ • Shell Mill • For Machining of Aluminum • Inch

    Mill 1-18™ • End Mill • Steep Taper CV40 • Inch

    (6)Mill 1-18™ • End Mill • Steep Taper CV40 • Inch

    Mill 1-18™ • End Mill • Reduced Weldon Shank • Inch

    (6)Mill 1-18™ • End Mill • Reduced Weldon Shank • Inch

    Mill 1-18™ • Shell Mill • For corner radii from 0.125" (3.2mm) to .25" (6.4mm) • Inch

    (4)Mill 1-18™ • Shell Mill • For corner radii from 0.125" (3.2mm) to .25" (6.4mm) • Inch

    Mill 1-18™ • End Mill • Reduced Weldon Shank • For corner radii from .079" (2.4mm) to .25" (6.4mm) • Inch

    (2)Mill 1-18™ • End Mill • Reduced Weldon Shank • For corner radii from .079" (2.4mm) to .25" (6.4mm) • Inch
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?