Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Cutters KNS® • Inch

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (37)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(37)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(37)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(37)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(37)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(37)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(37)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(37)
    • M Stainless Steel (37)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(37)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(37)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(37)
    • K Cast Iron (37)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(37)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(37)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(37)
    • N Non-Ferrous Materials (37)
      • N1
        Wrought Aluminum (37)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(37)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(37)
    • S High-Temp Alloys (37)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(37)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(37)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(37)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(37)
    Applications
    Applications
    • Slot MillingSlot Milling (37)
    • Slot SideSlot Side (37)
    • Slot Square EndSlot Square End (37)
    Cutting Diameter
    Cutting Diameter
    • 2.5 in(1)
    • 3.0 in(2)
    • 4.0 in(10)
    • 5.0 in(11)
    • 6.0 in(5)
    • 8.0 in(5)
    • 10.0 in(3)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 63.5 mm(1)
    • 76.2 mm(2)
    • 101.601 mm(10)
    • 127.0 mm(11)
    • 152.4 mm(5)
    • 203.201 mm(5)
    • 254.0 mm(3)
    Cutting Diameter MinkomuCutting Diameter Max
    Reach
    Reach
    • 1.782 in(1)
    • 1.792 in(1)
    • 1.821 in(1)
    • 2.053 in(1)
    • 2.067 in(1)
    • 2.083 in(1)
    • 2.1 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 45.25 mm(1)
    • 45.5 mm(1)
    • 46.25 mm(1)
    • 52.151 mm(1)
    • 52.5 mm(1)
    • 52.901 mm(1)
    • 53.35 mm(1)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (7)
    Number of Flutes
    Number of Flutes
    • 10 (1)
    • 11 (4)
    • 12 (2)
    • 13 (2)
    • 14 (1)
    • 15 (2)
    • 17 (3)
    • 5 (4)
    • 6 (2)
    • 7 (8)
    • 8 (6)
    • 9 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (32)
    • 2.0 (31)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 1.782 in(1)
    • 1.792 in(1)
    • 1.821 in(1)
    • 2.053 in(1)
    • 2.067 in(1)
    • 2.083 in(1)
    • 2.1 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 45.25 mm(1)
    • 45.5 mm(1)
    • 46.25 mm(1)
    • 52.151 mm(1)
    • 52.5 mm(1)
    • 52.901 mm(1)
    • 53.35 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.006 in(9)
    • 0.008 in(20)
    • 0.012 in(12)
    • 0.016 in(6)
    • 0.06 in(5)
    • 0.063 in(5)
    • 0.079 in(6)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.151 mm(9)
    • 0.2 mm(20)
    • 0.301 mm(12)
    • 0.4 mm(6)
    • 1.5 mm(5)
    • 1.6 mm(5)
    • 2.0 mm(6)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC522M (37)
    • KCPK30 (37)
    • KCPM40 (37)
    • KCU25 (37)
    Hand Of Tool
    Hand Of Tool
    • N (30)
    • R (7)
    frontEnd
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.376 in(5)
    • 0.875 in(2)
    • 0.906 in(1)
    • 1.094 in(4)
    • 1.156 in(6)
    • 1.532 in(6)
    • 1.879 in(4)
    • 1.917 in(1)
    • 2.566 in(4)
    • 2.75 in(1)
    • 3.567 in(1)
    • 3.594 in(1)
    • 3.605 in(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 9.55 mm(5)
    • 22.225 mm(2)
    • 23.0 mm(1)
    • 27.776 mm(4)
    • 29.35 mm(6)
    • 38.901 mm(6)
    • 47.7 mm(4)
    • 48.7 mm(1)
    • 65.175 mm(4)
    • 69.851 mm(1)
    • 90.575 mm(1)
    • 91.275 mm(1)
    • 91.575 mm(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 7.601 mm(5)
    • 9.175 mm(4)
    • 11.55 mm(5)
    • 12.675 mm(6)
    • 12.75 mm(6)
    • 14.5 mm(6)
    • 14.525 mm(6)
    • 14.75 mm(5)
    Maximum Cutting Insert Depth MinkomuMaximum Cutting Insert Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.299 in(5)
    • 0.361 in(4)
    • 0.455 in(5)
    • 0.499 in(6)
    • 0.502 in(6)
    • 0.572 in(6)
    • 0.573 in(6)
    • 0.581 in(5)
    Maximum Cutting Insert Depth MinkomuMaximum Cutting Insert Depth Max
    backEnd
    Connection Type
    Connection Type
    • ARBOR (30)
    • SHELL MILL (7)
    Back-End Diameter
    Back-End Diameter
    • 15.875 mm(1)
    • 15.9 mm(1)
    • 25.401 mm(11)
    • 31.75 mm(1)
    • 31.8 mm(10)
    • 38.1 mm(5)
    • 50.801 mm(8)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.625 in(1)
    • 0.626 in(1)
    • 1.0 in(11)
    • 1.25 in(1)
    • 1.252 in(10)
    • 1.5 in(5)
    • 2.0 in(8)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    KNS® • Arbor Mount • Inch
    (26)

    KNS® • Arbor Mount • Inch

    KNS® • Shell Mount • Inch
    (6)

    KNS® • Shell Mount • Inch

    KNS® • Arbor Mount • Reinforced Body • Inch
    (4)

    KNS® • Arbor Mount • Reinforced Body • Inch

    KNS® • Shell Mount • Reinforced Body • Inch
    (1)

    KNS® • Shell Mount • Reinforced Body • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?