Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KVNS A2™ Slotting Cutters

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (51)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(51)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(51)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(51)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(51)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(51)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(51)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(51)
    • M Stainless Steel (51)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(51)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(51)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(51)
    • K Cast Iron (51)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(51)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(51)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(51)
    • N Non-Ferrous Materials (43)
      • N1
        Wrought Aluminum (43)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(43)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(43)
    • S High-Temp Alloys (55)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(43)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(43)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(43)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(55)
    Applications
    Applications
    • Slot MillingSlot Milling (43)
    • Slot SideSlot Side (43)
    Cutting Diameter
    Cutting Diameter
    • 2.48 in(3)
    • 2.5 in(2)
    • 3.0 in(6)
    • 3.15 in(4)
    • 3.938 in(4)
    • 4.0 in(5)
    • 4.921 in(4)
    • 5.0 in(4)
    • 6.0 in(2)
    • 6.299 in(3)
    • 7.875 in(2)
    • 8.0 in(1)
    • 9.843 in(1)
    • 10.0 in(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 63.0 mm(3)
    • 63.5 mm(2)
    • 76.2 mm(6)
    • 80.0 mm(4)
    • 100.0 mm(4)
    • 101.601 mm(5)
    • 125.0 mm(4)
    • 127.0 mm(4)
    • 152.4 mm(2)
    • 160.0 mm(3)
    • 200.0 mm(2)
    • 203.201 mm(1)
    • 250.0 mm(1)
    • 254.0 mm(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 1.6 mm(8)
    • 2.2 mm(8)
    • 3.0 mm(14)
    • 4.0 mm(9)
    • 5.0 mm(1)
    • 6.0 mm(3)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.063 in(8)
    • 0.088 in(8)
    • 0.119 in(14)
    • 0.157 in(9)
    • 0.197 in(1)
    • 0.237 in(3)
    Cutting Length MinkomuCutting Length Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (43)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • 2 Key & Cutter Retention Screw (21)
    • 2 Key & Socket Head Cap Screw (22)
    Number of Flutes
    Number of Flutes
    • 11 (8)
    • 14 (5)
    • 19 (3)
    • 24 (3)
    • 4 (3)
    • 5 (4)
    • 6 (4)
    • 7 (4)
    • 8 (1)
    • 9 (8)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (56)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.006 in(11)
    • 0.008 in(40)
    • 0.012 in(5)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.151 mm(11)
    • 0.2 mm(40)
    • 0.301 mm(5)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(56)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(56)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC735M (43)
    • KC925M (43)
    • KC930M (43)
    • KCPK30 (52)
    • KMF (43)
    Hand Of Tool
    Hand Of Tool
    • N (43)
    Wiper Insert
    Wiper Insert
    • N (13)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.063 in(3)
    • 0.088 in(2)
    • 0.089 in(1)
    • 0.12 in(3)
    • 0.159 in(4)
    • 0.239 in(1)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 1.6 mm(3)
    • 2.2 mm(2)
    • 2.25 mm(1)
    • 3.051 mm(3)
    • 4.05 mm(4)
    • 6.051 mm(1)
    Cutting Width MinkomuCutting Width Max
    Insert Shape
    Insert Shape
    • PRISMATIC (56)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.591 in(3)
    • 0.625 in(2)
    • 0.828 in(4)
    • 0.875 in(6)
    • 1.063 in(9)
    • 1.375 in(4)
    • 1.379 in(4)
    • 1.438 in(2)
    • 1.575 in(3)
    • 2.25 in(1)
    • 2.362 in(2)
    • 3.25 in(2)
    • 3.346 in(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 15.0 mm(3)
    • 15.875 mm(2)
    • 21.0 mm(4)
    • 22.225 mm(6)
    • 27.0 mm(9)
    • 34.926 mm(4)
    • 35.0 mm(4)
    • 36.525 mm(2)
    • 40.0 mm(3)
    • 57.151 mm(1)
    • 60.0 mm(2)
    • 82.551 mm(2)
    • 85.0 mm(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    insertGeometry
    Shape
    Shape
    • PRISMATIC (13)
    Insert Seat Size
    Insert Seat Size
    • 1 (3)
    • 2 (3)
    • 3 (3)
    • 4 (3)
    • 6 (1)
    Cutting Tool Material
    Cutting Tool Material
    • H W (13)
    backEnd
    Connection Type
    Connection Type
    • ARBOR (43)
    Back-End Diameter
    Back-End Diameter
    • 15.875 mm(8)
    • 16.0 mm(7)
    • 22.0 mm(4)
    • 25.401 mm(5)
    • 31.75 mm(6)
    • 32.0 mm(4)
    • 40.0 mm(6)
    • 50.801 mm(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.625 in(8)
    • 0.63 in(7)
    • 0.866 in(4)
    • 1.0 in(5)
    • 1.25 in(6)
    • 1.26 in(4)
    • 1.575 in(6)
    • 2.0 in(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""

    Cutters KVNS™ A2™ • Inch

    (30)Cutters KVNS™ A2™ • Inch

    Cutters KVNS™ A2™ • Metric

    (27)Cutters KVNS™ A2™ • Metric

    Inserts KVNS™ A2™

    (13)Inserts KVNS™ A2™
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?