Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

DUO-λOCK® Modular End Mills • Roughing

Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (27)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (17)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (17)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (17)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (27)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (27)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (27)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (18)
  • M Stainless Steel (27)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (27)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (27)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (27)
  • K Cast Iron (27)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (27)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (27)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (27)
  • S High-Temp Alloys (19)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (19)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (10)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (19)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (10)
  • H Hardened Materials (27)
    • H1
      Hardened Materials 44-48 HRC (27)
    • H2
      Hardened Materials 48-55 HRC (10)
    • H3
      Hardened Materials 56-60 HRC (10)
Applications
Applications
  • Face Milling Face Milling (10)
  • Pocket Pocket (19)
  • Pocket Helical Pocket Helical (19)
  • Pocket Milling Pocket Milling (19)
  • Pocket Plunge Milling Pocket Plunge Milling (9)
  • Ramping Ramping (14)
  • Shoulder Milling Shoulder Milling (19)
  • Shoulder Roughing Shoulder Roughing (19)
  • Shoulder Square End Shoulder Square End (19)
  • Slot Milling Slot Milling (19)
  • Slot Square End Slot Square End (19)
Cutting Diameter
Cutting Diameter
  • 0.375 in (2)
  • 0.394 in (3)
  • 0.473 in (3)
  • 0.5 in (3)
  • 0.625 in (3)
  • 0.63 in (3)
  • 0.75 in (3)
  • 0.787 in (3)
  • 0.984 in (2)
  • 1.0 in (2)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 9.525 mm (2)
  • 10.0 mm (3)
  • 12.0 mm (3)
  • 12.701 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (3)
  • 19.05 mm (3)
  • 20.0 mm (3)
  • 25.0 mm (2)
  • 25.401 mm (2)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Length
Cutting Length
  • 7.15 mm (1)
  • 7.5 mm (1)
  • 9.0 mm (1)
  • 9.525 mm (1)
  • 11.9 mm (1)
  • 12.0 mm (1)
  • 14.3 mm (2)
  • 15.0 mm (3)
  • 18.0 mm (2)
  • 19.05 mm (2)
  • 23.8 mm (2)
  • 24.0 mm (2)
  • 28.576 mm (2)
  • 30.0 mm (2)
  • 37.5 mm (2)
  • 38.1 mm (2)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.281 in (1)
  • 0.295 in (1)
  • 0.354 in (1)
  • 0.375 in (1)
  • 0.47 in (1)
  • 0.473 in (1)
  • 0.564 in (2)
  • 0.591 in (3)
  • 0.709 in (2)
  • 0.75 in (2)
  • 0.937 in (2)
  • 0.946 in (2)
  • 1.125 in (2)
  • 1.181 in (2)
  • 1.476 in (2)
  • 1.5 in (2)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 0.656 in (1)
  • 0.69 in (1)
  • 0.828 in (1)
  • 0.843 in (1)
  • 0.876 in (1)
  • 0.886 in (2)
  • 1.063 in (2)
  • 1.093 in (1)
  • 1.102 in (1)
  • 1.127 in (2)
  • 1.314 in (1)
  • 1.379 in (1)
  • 1.407 in (2)
  • 1.417 in (2)
  • 1.689 in (2)
  • 1.772 in (2)
  • 2.224 in (2)
  • 2.253 in (2)
Reach Min komu Reach Max
Reach
Reach
  • 16.651 mm (1)
  • 17.5 mm (1)
  • 21.0 mm (1)
  • 21.401 mm (1)
  • 22.25 mm (1)
  • 22.5 mm (2)
  • 27.0 mm (2)
  • 27.75 mm (1)
  • 28.0 mm (1)
  • 28.6 mm (2)
  • 33.375 mm (1)
  • 35.0 mm (1)
  • 35.7 mm (2)
  • 36.0 mm (2)
  • 42.901 mm (2)
  • 45.0 mm (2)
  • 56.5 mm (2)
  • 57.2 mm (2)
Reach Min komu Reach Max
Number of Flutes
Number of Flutes
  • 3 (8)
  • 4 (12)
  • 5 (2)
  • 6 (5)
Over All Length [L]
Over All Length [L]
  • 1.149 in (1)
  • 1.181 in (1)
  • 1.335 in (1)
  • 1.379 in (2)
  • 1.417 in (1)
  • 1.467 in (1)
  • 1.655 in (2)
  • 1.717 in (2)
  • 1.881 in (1)
  • 1.891 in (1)
  • 2.193 in (2)
  • 2.205 in (2)
  • 2.255 in (1)
  • 2.319 in (1)
  • 2.63 in (2)
  • 2.713 in (2)
  • 3.461 in (2)
  • 3.488 in (2)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 29.151 mm (1)
  • 30.0 mm (1)
  • 33.9 mm (1)
  • 35.0 mm (2)
  • 36.0 mm (1)
  • 37.25 mm (1)
  • 42.0 mm (2)
  • 43.6 mm (2)
  • 47.75 mm (1)
  • 48.0 mm (1)
  • 55.7 mm (2)
  • 56.0 mm (2)
  • 57.276 mm (1)
  • 58.901 mm (1)
  • 66.8 mm (2)
  • 68.9 mm (2)
  • 87.9 mm (2)
  • 88.601 mm (2)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Style
Corner Style
  • CHAMFER (9)
  • RADIUS (18)
Corner Radius
Corner Radius
  • 0.0 in (9)
  • 0.015 in (5)
  • 0.016 in (4)
  • 0.02 in (1)
  • 0.03 in (8)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (9)
  • 0.375 mm (5)
  • 0.4 mm (4)
  • 0.5 mm (1)
  • 0.75 mm (8)
Corner Radius Min komu Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (18)
  • 0.5 mm (9)
Corner Chamfer Min komu Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (18)
  • 0.02 in (9)
Corner Chamfer Min komu Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KCPM15 (17)
  • KCSM15 (10)
backEnd
Back-End Diameter
Back-End Diameter
  • 9.525 mm (2)
  • 10.0 mm (3)
  • 12.0 mm (3)
  • 12.201 mm (3)
  • 15.875 mm (1)
  • 16.0 mm (3)
  • 19.05 mm (2)
  • 19.3 mm (3)
  • 24.401 mm (2)
  • 25.0 mm (2)
  • 25.401 mm (3)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.375 in (2)
  • 0.394 in (3)
  • 0.473 in (3)
  • 0.48 in (3)
  • 0.625 in (1)
  • 0.63 in (3)
  • 0.75 in (2)
  • 0.76 in (3)
  • 0.961 in (2)
  • 0.984 in (2)
  • 1.0 in (3)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""

DUO-LOCK™ • KenCut™ RR • Radiused • 4 & 6 Flutes • Inch

(5) DUO-LOCK™ • KenCut™ RR • Radiused • 4 & 6 Flutes • Inch

DUO-LOCK™ • KenCut™ RR • Radiused • 4 & 6 Flutes • Metric

(5) DUO-LOCK™ • KenCut™ RR • Radiused • 4 & 6 Flutes • Metric

DUO-LOCK™ • KenCut™ RR • Chamfered • 4–5 Flutes • Metric

(5) DUO-LOCK™ • KenCut™ RR • Chamfered • 4–5 Flutes • Metric

DUO-LOCK™ • KenCut™ RR • S rádiusem • 3-břité • Metrické

(4) DUO-LOCK™ • KenCut™ RR • S rádiusem • 3-břité • Metrické

DUO-LOCK™ • KenCut™ RR • Radiused • 3 Flutes • Inch

(4) DUO-LOCK™ • KenCut™ RR • Radiused • 3 Flutes • Inch

DUO-LOCK™ • KenCut™ RR • Chamfered • 4–5 Flutes • Inch

(4) DUO-LOCK™ • KenCut™ RR • Chamfered • 4–5 Flutes • Inch
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Děkujeme za úspěšnou registraci. Nyní máte okamžitý přístup k přihlášení a můžete stránky používat.

You are about to leave the Solution building process.

Are you sure you want to leave?