Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

1/4 iC

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (43)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(43)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(43)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(43)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(43)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(43)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(43)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(43)
    • M Stainless Steel (43)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(43)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(43)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(43)
    • K Cast Iron (43)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(43)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(43)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(43)
    • S High-Temp Alloys (35)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(35)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(35)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(35)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(35)
    • H Hardened Materials (35)
      • H1
        Hardened Materials 44-48 HRC(35)
    Applications
    Applications
    • ID Thread TurningID Thread Turning (16)
    • Pipe ThreadPipe Thread (27)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (27)
    • Shoulder RoughingShoulder Roughing (27)
    • Shoulder Square EndShoulder Square End (27)
    • Thread MillingThread Milling (27)
    • ThreadingThreading (27)
    Cutting Diameter
    Cutting Diameter
    • 0.579 in(1)
    • 0.58 in(1)
    • 0.581 in(1)
    • 0.591 in(1)
    • 0.677 in(1)
    • 0.681 in(1)
    • 0.787 in(2)
    • 0.811 in(2)
    • 0.906 in(1)
    • 0.909 in(2)
    • 0.917 in(1)
    • 1.02 in(2)
    • 1.024 in(2)
    • 1.22 in(4)
    • 1.441 in(2)
    • 1.651 in(1)
    • 1.69 in(1)
    • 2.09 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 14.701 mm(1)
    • 14.726 mm(1)
    • 14.75 mm(1)
    • 15.0 mm(1)
    • 17.2 mm(1)
    • 17.3 mm(1)
    • 20.0 mm(2)
    • 20.6 mm(2)
    • 23.0 mm(1)
    • 23.1 mm(2)
    • 23.3 mm(1)
    • 25.901 mm(2)
    • 26.0 mm(2)
    • 31.0 mm(4)
    • 36.6 mm(2)
    • 41.901 mm(1)
    • 42.926 mm(1)
    • 53.075 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Reach
    Reach
    • 1.579 in(2)
    • 1.78 in(1)
    • 1.788 in(1)
    • 2.559 in(1)
    • 2.561 in(1)
    • 2.567 in(1)
    • 2.575 in(2)
    • 2.693 in(1)
    • 2.961 in(1)
    • 2.969 in(1)
    • 3.209 in(1)
    • 3.358 in(2)
    • 3.362 in(2)
    • 3.598 in(1)
    • 3.95 in(1)
    • 3.954 in(1)
    • 4.059 in(1)
    • 4.346 in(1)
    • 4.358 in(1)
    • 4.728 in(1)
    • 4.74 in(1)
    • 5.039 in(1)
    • 5.428 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 40.1 mm(2)
    • 45.2 mm(1)
    • 45.401 mm(1)
    • 65.0 mm(1)
    • 65.05 mm(1)
    • 65.2 mm(1)
    • 65.4 mm(2)
    • 68.4 mm(1)
    • 75.2 mm(1)
    • 75.4 mm(1)
    • 81.5 mm(1)
    • 85.301 mm(2)
    • 85.4 mm(2)
    • 91.4 mm(1)
    • 100.301 mm(1)
    • 100.4 mm(1)
    • 103.101 mm(1)
    • 110.4 mm(1)
    • 110.7 mm(1)
    • 120.101 mm(1)
    • 120.4 mm(1)
    • 128.0 mm(1)
    • 137.875 mm(1)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (27)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (2)
    • Straight-Cylindrical (13)
    • Weldon (12)
    Number of Flutes
    Number of Flutes
    • 1 (4)
    • 2 (10)
    • 3 (6)
    • 4 (6)
    • 5 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.579 in(2)
    • 3.74 in(1)
    • 3.761 in(1)
    • 4.72 in(1)
    • 4.724 in(1)
    • 4.843 in(1)
    • 4.921 in(1)
    • 5.197 in(1)
    • 5.299 in(1)
    • 5.315 in(2)
    • 5.351 in(1)
    • 5.382 in(1)
    • 5.598 in(1)
    • 5.787 in(1)
    • 5.791 in(1)
    • 6.37 in(1)
    • 6.449 in(1)
    • 6.457 in(1)
    • 6.535 in(1)
    • 7.202 in(1)
    • 7.323 in(1)
    • 7.702 in(1)
    • 7.718 in(1)
    • 7.819 in(1)
    • 8.35 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.1 mm(2)
    • 95.0 mm(1)
    • 95.5 mm(1)
    • 119.9 mm(1)
    • 120.0 mm(1)
    • 123.0 mm(1)
    • 125.0 mm(1)
    • 132.0 mm(1)
    • 134.6 mm(1)
    • 135.0 mm(2)
    • 135.9 mm(1)
    • 136.701 mm(1)
    • 142.201 mm(1)
    • 147.0 mm(1)
    • 147.1 mm(1)
    • 161.8 mm(1)
    • 163.8 mm(1)
    • 164.0 mm(1)
    • 166.0 mm(1)
    • 182.9 mm(1)
    • 186.0 mm(1)
    • 195.601 mm(1)
    • 196.0 mm(1)
    • 198.601 mm(1)
    • 212.101 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.002 in(29)
    • 0.003 in(27)
    • 0.004 in(28)
    • 0.006 in(27)
    • 0.01 in(27)
    • 0.011 in(5)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(29)
    • 0.076 mm(27)
    • 0.1 mm(28)
    • 0.151 mm(27)
    • 0.25 mm(27)
    • 0.275 mm(5)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC610M (35)
    • KC635M (35)
    Hand Of Tool
    Hand Of Tool
    • R (27)
    Countersunk Angle
    Countersunk Angle
    • 27.5 (6)
    • 30.0 (10)
    Countersunk Angle MinkomuCountersunk Angle Max
    frontEnd
    Thread TPI
    Thread TPI
    • 6.0 (5)
    • 10.0 (31)
    • 11.0 (27)
    • 12.0 (4)
    • 16.0 (29)
    • 48.0 (24)
    Thread TPI MinkomuThread TPI Max
    Thread Pitch
    Thread Pitch
    • 1.5 mm(22)
    • 2.0 mm(27)
    • 2.5 mm(6)
    • 3.5 mm(5)
    • 4.0 mm(22)
    • 6.0 mm(5)
    Thread Pitch MinkomuThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.06 in(22)
    • 0.079 in(27)
    • 0.098 in(6)
    • 0.138 in(5)
    • 0.157 in(22)
    • 0.237 in(5)
    Thread Pitch MinkomuThread Pitch Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • LT-TRIANGLE LAY DOWN THREAD 60 (16)
    Insert IC Size
    Insert IC Size
    • 6.351 mm(16)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.25 in(16)
    Insert IC Size MinkomuInsert IC Size Max
    Insert Seat Size
    Insert Seat Size
    • 11 (16)
    Cutting Edge Length
    Cutting Edge Length
    • 11.0 mm(16)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.433 in(16)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Tool Material
    Cutting Tool Material
    • H W (16)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (25)
    • SHELL MILL (2)
    Back-End Diameter
    Back-End Diameter
    • 10.701 mm(1)
    • 11.101 mm(1)
    • 12.701 mm(1)
    • 14.0 mm(1)
    • 14.3 mm(1)
    • 15.9 mm(3)
    • 16.0 mm(2)
    • 18.0 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(1)
    • 25.0 mm(4)
    • 25.401 mm(5)
    • 31.8 mm(2)
    • 32.0 mm(1)
    • 38.1 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.421 in(1)
    • 0.437 in(1)
    • 0.5 in(1)
    • 0.551 in(1)
    • 0.564 in(1)
    • 0.626 in(3)
    • 0.63 in(2)
    • 0.709 in(1)
    • 0.748 in(1)
    • 0.75 in(1)
    • 0.787 in(1)
    • 0.984 in(4)
    • 1.0 in(5)
    • 1.252 in(2)
    • 1.26 in(1)
    • 1.5 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Těla fréz
    (27)

    Těla fréz

    Břitové destičky
    (16)

    Břitové destičky

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?