Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Tapered Thread Mills

Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (12)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (12)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (12)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (12)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (12)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (12)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (12)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (12)
  • M Stainless Steel (12)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (12)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (12)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (12)
  • K Cast Iron (12)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (12)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (12)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (12)
  • S High-Temp Alloys (9)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (9)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (9)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (9)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (9)
  • H Hardened Materials (12)
    • H1
      Hardened Materials 44-48 HRC (12)
Applications
Applications
  • Thread Milling Thread Milling (12)
  • Threading Threading (12)
Cutting Diameter
Cutting Diameter
  • 0.39 in (1)
  • 0.399 in (1)
  • 0.61 in (2)
  • 0.67 in (1)
  • 0.748 in (1)
  • 0.75 in (1)
  • 1.024 in (2)
  • 1.18 in (1)
  • 1.655 in (2)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 9.9 mm (1)
  • 10.125 mm (1)
  • 15.5 mm (2)
  • 17.026 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 26.0 mm (2)
  • 29.975 mm (1)
  • 42.0 mm (2)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Length
Cutting Length
  • 10.925 mm (2)
  • 11.0 mm (1)
  • 16.0 mm (6)
  • 26.925 mm (2)
  • 27.0 mm (1)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.43 in (2)
  • 0.433 in (1)
  • 0.63 in (6)
  • 1.06 in (2)
  • 1.063 in (1)
Cutting Length Min komu Cutting Length Max
Type of Thread
Type of Thread
  • BSW (12)
  • M (12)
  • NPS (6)
  • NPT (9)
  • NPTF (9)
  • UN (9)
Reach
Reach
  • 0.61 in (2)
  • 0.866 in (1)
  • 0.87 in (1)
  • 0.906 in (1)
  • 0.909 in (1)
  • 1.341 in (1)
  • 1.69 in (1)
  • 1.693 in (1)
  • 1.77 in (1)
  • 1.772 in (1)
  • 2.031 in (1)
Reach Min komu Reach Max
Reach
Reach
  • 15.5 mm (2)
  • 22.0 mm (1)
  • 22.1 mm (1)
  • 23.0 mm (1)
  • 23.1 mm (1)
  • 34.051 mm (1)
  • 42.926 mm (1)
  • 43.0 mm (1)
  • 44.95 mm (1)
  • 45.0 mm (1)
  • 51.551 mm (1)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (5)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Number of Flutes
Number of Flutes
  • 1 (7)
  • 2 (5)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (9)
  • 2.0 (12)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 3.031 in (1)
  • 3.12 in (1)
  • 3.15 in (1)
  • 3.346 in (1)
  • 3.38 in (1)
  • 3.42 in (1)
  • 3.56 in (1)
  • 3.938 in (1)
  • 4.021 in (1)
  • 4.38 in (1)
  • 4.65 in (1)
  • 4.724 in (1)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 77.0 mm (1)
  • 79.25 mm (1)
  • 80.0 mm (1)
  • 85.0 mm (1)
  • 85.851 mm (1)
  • 86.875 mm (1)
  • 90.426 mm (1)
  • 100.0 mm (1)
  • 102.101 mm (1)
  • 111.25 mm (1)
  • 118.101 mm (1)
  • 120.0 mm (1)
Over All Length [L] Min komu Over All Length [L] Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC610M (12)
  • KC620M (12)
  • KC635M (12)
frontEnd
Thread TPI
Thread TPI
  • 6.0 (3)
  • 7.0 (3)
  • 8.0 (3)
  • 9.0 (3)
  • 10.0 (3)
  • 11.0 (9)
  • 11.5 (6)
  • 12.0 (9)
  • 14.0 (12)
  • 16.0 (12)
  • 18.0 (9)
  • 19.0 (9)
  • 20.0 (9)
  • 24.0 (9)
  • 27.0 (6)
  • 28.0 (3)
  • 32.0 (6)
Thread TPI Min komu Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.5 mm (3)
  • 0.75 mm (6)
  • 1.0 mm (9)
  • 1.25 mm (9)
  • 1.5 mm (12)
  • 1.75 mm (6)
  • 2.0 mm (9)
  • 2.5 mm (3)
  • 3.0 mm (3)
  • 3.5 mm (3)
  • 4.0 mm (3)
  • 4.5 mm (3)
Thread Pitch Min komu Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.02 in (3)
  • 0.03 in (6)
  • 0.039 in (9)
  • 0.049 in (9)
  • 0.06 in (12)
  • 0.069 in (6)
  • 0.079 in (9)
  • 0.098 in (3)
  • 0.119 in (3)
  • 0.138 in (3)
  • 0.157 in (3)
  • 0.177 in (3)
Thread Pitch Min komu Thread Pitch Max
Neck Diameter
Neck Diameter
  • 0.29 in (1)
  • 0.291 in (1)
  • 0.49 in (1)
  • 0.492 in (1)
  • 0.59 in (1)
  • 0.591 in (1)
  • 0.886 in (1)
  • 0.941 in (1)
  • 1.417 in (1)
Neck Diameter Min komu Neck Diameter Max
Neck Diameter
Neck Diameter
  • 7.375 mm (1)
  • 7.4 mm (1)
  • 12.451 mm (1)
  • 12.5 mm (1)
  • 14.976 mm (1)
  • 15.0 mm (1)
  • 22.5 mm (1)
  • 23.875 mm (1)
  • 36.0 mm (1)
Neck Diameter Min komu Neck Diameter Max
backEnd
Back-End Diameter
Back-End Diameter
  • 15.875 mm (1)
  • 16.0 mm (1)
  • 19.05 mm (3)
  • 20.0 mm (2)
  • 25.0 mm (1)
  • 25.401 mm (2)
  • 31.75 mm (1)
  • 32.0 mm (1)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.625 in (1)
  • 0.63 in (1)
  • 0.75 in (3)
  • 0.787 in (2)
  • 0.984 in (1)
  • 1.0 in (2)
  • 1.25 in (1)
  • 1.26 in (1)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""

TMS • Závitovací frézy • Kuželová stopka • Pravostranné

(3) TMS • Závitovací frézy • Kuželová stopka • Pravostranné

TMS • Závitovací frézy • Oboustranné břitové destičky

(5) TMS • Závitovací frézy • Oboustranné břitové destičky

TMS • Systém frézování závitů • Závitovací frézy • Kuželové závity (pravostranné frézy)

(4) TMS • Systém frézování závitů • Závitovací frézy • Kuželové závity (pravostranné frézy)
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Děkujeme za úspěšnou registraci. Nyní máte okamžitý přístup k přihlášení a můžete stránky používat.

You are about to leave the Solution building process.

Are you sure you want to leave?