Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Závitování LT – vyvrtávací tyče

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (52)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(52)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(52)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(52)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(52)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(52)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(52)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(52)
    • M Stainless Steel (52)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(52)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(52)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(52)
    • K Cast Iron (52)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(52)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(52)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(52)
    • S High-Temp Alloys (52)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(52)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(52)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(52)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(52)
    Type of Thread
    Type of Thread
    • 55 (52)
    • 60 (52)
    • ACME (39)
    • API (13)
    • API BUTTRESS (13)
    • API RD (26)
    • BSPT (39)
    • BSW (52)
    • M (52)
    • NPT (39)
    • NPTF (39)
    • RD DIN 405 (39)
    • STUB ACME (39)
    • TR DIN 103 (39)
    • UN (39)
    • UNJ (39)
    Over All Length [L]
    Over All Length [L]
    • 2.362 in(1)
    • 3.938 in(2)
    • 5.906 in(2)
    • 6.0 in(2)
    • 7.0 in(8)
    • 7.087 in(11)
    • 7.875 in(5)
    • 8.0 in(1)
    • 9.843 in(6)
    • 10.0 in(10)
    • 11.811 in(2)
    • 12.0 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 60.0 mm(1)
    • 100.0 mm(2)
    • 150.0 mm(2)
    • 152.4 mm(2)
    • 177.8 mm(8)
    • 180.0 mm(11)
    • 200.0 mm(5)
    • 203.201 mm(1)
    • 250.0 mm(6)
    • 254.0 mm(10)
    • 300.0 mm(2)
    • 304.8 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.001 in(23)
    • 0.002 in(39)
    • 0.003 in(26)
    • 0.004 in(16)
    • 0.006 in(26)
    • 0.008 in(26)
    • 0.01 in(7)
    • 0.012 in(13)
    • 0.017 in(13)
    • 0.028 in(16)
    • 0.037 in(8)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.025 mm(23)
    • 0.05 mm(39)
    • 0.076 mm(26)
    • 0.1 mm(16)
    • 0.151 mm(26)
    • 0.2 mm(26)
    • 0.225 mm(7)
    • 0.301 mm(13)
    • 0.426 mm(13)
    • 0.701 mm(16)
    • 0.925 mm(8)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K00331 (16)
    • K68 (23)
    • KC5010 (23)
    • KC5025 (52)
    • KC710 (24)
    • KC720 (47)
    • KC722 (23)
    • KC730 (52)
    • KU25T (23)
    • SP4066 (10)
    Hand Of Tool
    Hand Of Tool
    • L (21)
    • R (31)
    F Dimension
    F Dimension
    • 7.101 mm(4)
    • 7.301 mm(4)
    • 8.9 mm(5)
    • 10.3 mm(1)
    • 11.3 mm(2)
    • 11.5 mm(2)
    • 11.675 mm(4)
    • 11.701 mm(1)
    • 12.951 mm(4)
    • 13.4 mm(3)
    • 15.601 mm(2)
    • 15.8 mm(1)
    • 16.1 mm(2)
    • 16.3 mm(2)
    • 16.5 mm(3)
    • 17.2 mm(2)
    • 17.401 mm(1)
    • 18.026 mm(3)
    • 19.55 mm(1)
    • 21.5 mm(2)
    • 21.6 mm(1)
    • 25.8 mm(2)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.28 in(4)
    • 0.288 in(4)
    • 0.351 in(5)
    • 0.406 in(1)
    • 0.445 in(2)
    • 0.453 in(2)
    • 0.46 in(4)
    • 0.461 in(1)
    • 0.51 in(4)
    • 0.528 in(3)
    • 0.614 in(2)
    • 0.622 in(1)
    • 0.634 in(2)
    • 0.642 in(2)
    • 0.65 in(3)
    • 0.677 in(2)
    • 0.685 in(1)
    • 0.71 in(3)
    • 0.77 in(1)
    • 0.846 in(2)
    • 0.85 in(1)
    • 1.016 in(2)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 12.701 mm(4)
    • 13.0 mm(4)
    • 16.0 mm(2)
    • 16.5 mm(3)
    • 17.0 mm(1)
    • 20.0 mm(5)
    • 20.326 mm(4)
    • 22.85 mm(4)
    • 24.0 mm(3)
    • 27.0 mm(2)
    • 29.0 mm(5)
    • 30.475 mm(3)
    • 31.75 mm(3)
    • 32.0 mm(3)
    • 36.825 mm(1)
    • 38.1 mm(1)
    • 39.0 mm(2)
    • 47.0 mm(2)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.5 in(4)
    • 0.512 in(4)
    • 0.63 in(2)
    • 0.65 in(3)
    • 0.669 in(1)
    • 0.787 in(5)
    • 0.8 in(4)
    • 0.9 in(4)
    • 0.946 in(3)
    • 1.063 in(2)
    • 1.143 in(5)
    • 1.2 in(3)
    • 1.25 in(3)
    • 1.26 in(3)
    • 1.45 in(1)
    • 1.5 in(1)
    • 1.536 in(2)
    • 1.85 in(2)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.984 in(2)
    • 1.0 in(2)
    • 1.25 in(2)
    • 1.26 in(3)
    • 1.415 in(1)
    • 1.5 in(2)
    • 1.57 in(1)
    • 1.575 in(3)
    • 2.25 in(2)
    • 2.362 in(2)
    • 2.5 in(4)
    • 2.52 in(2)
    • 3.0 in(2)
    • 3.15 in(4)
    • 3.75 in(2)
    • 3.781 in(1)
    • 3.938 in(4)
    • 4.5 in(2)
    • 4.724 in(1)
    • 5.0 in(2)
    • 5.039 in(3)
    • 5.906 in(1)
    • 6.0 in(2)
    • 6.299 in(2)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.0 mm(2)
    • 25.401 mm(2)
    • 31.75 mm(2)
    • 32.0 mm(3)
    • 35.95 mm(1)
    • 38.1 mm(2)
    • 39.875 mm(1)
    • 40.0 mm(3)
    • 57.151 mm(2)
    • 60.0 mm(2)
    • 63.5 mm(4)
    • 64.0 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(4)
    • 95.25 mm(2)
    • 96.0 mm(1)
    • 100.0 mm(4)
    • 114.301 mm(2)
    • 120.0 mm(1)
    • 127.0 mm(2)
    • 128.0 mm(3)
    • 150.0 mm(1)
    • 152.4 mm(2)
    • 160.0 mm(2)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (12)
    • S (40)
    frontEnd
    Clamp Style
    Clamp Style
    • C (14)
    • M (23)
    • S (15)
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(2)
    • 10.0 mm(2)
    • 12.701 mm(1)
    • 15.875 mm(2)
    • 16.0 mm(3)
    • 19.05 mm(10)
    • 20.0 mm(12)
    • 25.0 mm(5)
    • 25.401 mm(2)
    • 31.75 mm(6)
    • 32.0 mm(5)
    • 40.0 mm(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(2)
    • 0.394 in(2)
    • 0.5 in(1)
    • 0.625 in(2)
    • 0.63 in(3)
    • 0.75 in(10)
    • 0.787 in(12)
    • 0.984 in(5)
    • 1.0 in(2)
    • 1.25 in(6)
    • 1.26 in(5)
    • 1.575 in(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.584 in(2)
    • 0.606 in(1)
    • 0.741 in(11)
    • 0.764 in(1)
    • 0.939 in(4)
    • 0.961 in(1)
    • 1.214 in(5)
    • 1.53 in(2)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 14.826 mm(2)
    • 15.4 mm(1)
    • 18.825 mm(11)
    • 19.401 mm(1)
    • 23.826 mm(4)
    • 24.401 mm(1)
    • 30.826 mm(5)
    • 38.825 mm(2)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.864 in(4)
    • 1.141 in(5)
    • 1.455 in(2)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 21.951 mm(4)
    • 28.951 mm(5)
    • 36.95 mm(2)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    E-LSE
    (9)

    E-LSE

    S-LSE
    (14)

    S-LSE

    A-LSE
    (26)

    A-LSE

    E-LSE
    (3)

    E-LSE

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk