Vítejte
Potvrďte své předvolby
Aktualizovat předvolby
Návrhy produktů
Product Family suggestions
Kennametal k vašim službám
Zakaznicke centrum
Vítejte, Přihlásit se
Vámi vybraný účet:
Vyskytl se problém s vaším účtem. Kontaktujte prosím zákaznickou podporu.
Účet kupujícího Změnit účet
Účet pro příjemce zásilky Změnit účet
- Spravovat objednávky
- Spravovat kanály
Oznámení
Označit vše jako přečtené- Změnit heslo
- Můj profil
- Odhlásit se
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.
Vnitřní obrábění
Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
- P Steel (1383)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1383)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1383)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1383)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1383)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1383)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1383)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1383)
- M Stainless Steel (1383)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1383)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1383)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1383)
- K Cast Iron (1394)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1394)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1392)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1389)
- N Non-Ferrous Materials (1379)
- N1Wrought Aluminum (1377)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1377)
- N3High-Silicon Aluminum Alloys Si >12.2%(1016)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (1379)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1377)
- N6Carbon, Graphite Composites, CFRP (1376)
- N7MMC's (1192)
- S High-Temp Alloys (1394)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1394)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1394)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1394)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1386)
- H Hardened Materials (1210)
- H1Hardened Materials 44-48 HRC(1210)
- H2Hardened Materials 48-55 HRC(1210)
- H3Hardened Materials 56-60 HRC(1205)
- H4Hardened Materials >60 HRC(1084)
- C CFRP Materials (1357)
- C1CFRP, CFRP / CFRP (1356)
- C2CFRP / Aluminium CFRP / Non-Ferrous (1192)
Vybrat první volbu
- BR (2)
- CN (78)
- DE (75)
- GB (41)
- IN (1)
- SG (9)
- US (71)
Applications
Applications
Back Boring (121)
CRT Profiling (55)
Chamfer Turning (81)
Face Grooving (8)
Facing (270)
ID Facing (216)
ID Grooving (45)
ID Thread Turning (12)
Multiple Direction Cutting (1116)
TRN Boring (1062)
Threading (1)
Turning (189)
Type of Thread
Type of Thread
- 55 (6)
- 60 (16)
- ACME (17)
- API (13)
- API BUTTRESS (2)
- API RD (12)
- BSPT (4)
- BSW (14)
- BUTTRESS (10)
- M (9)
- NPT (12)
- NPTF (4)
- RD DIN 405 (6)
- STUB ACME (14)
- TR DIN 103 (6)
- UN (14)
- UNJ (12)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1252)
- Lightly Interrupted Cut (1386)
- Smooth Cut (1386)
- Varying Depth of Cut (1376)
=
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (21)
- 60.0 (14)
- 62.5 (13)
- 75.0 (48)
- 85.0 (7)
- 90.0 (289)
- 90.25 (10)
- 91.0 (2)
- 93.0 (315)
- 95.0 (658)
- 97.0 (8)
- 107.5 (50)
- 140.0 (4)
Tool Cutting Edge Angle MinZadejte hodnotukomuTool Cutting Edge Angle MaxTool Cutting Edge Angle
Connection Style
Connection Style
- Bolt-On Head (206)
- Boring Bar Shank (850)
- KM (220)
=
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (6)
- 1.0 (977)
- 2.0 (901)
- 3.0 (326)
- 4.0 (652)
- 6.0 (122)
- 8.0 (255)
Cutting Edges Per Insert MinZadejte hodnotukomuCutting Edges Per Insert MaxCutting Edges Per Insert
=
Over All Length [L]
Over All Length [L]
- 0.675 in(34)
- 0.696 in(12)
- 0.734 in(2)
- 0.787 in(2)
- 0.79 in(2)
- 0.892 in(6)
- 0.971 in(4)
- 0.984 in(3)
- 0.994 in(1)
- 1.01 in(2)
- 1.049 in(2)
- 1.246 in(6)
- 1.26 in(1)
- 1.27 in(3)
- 1.285 in(12)
- 1.348 in(4)
- 1.364 in(14)
- 1.365 in(1)
- 1.389 in(7)
- 1.405 in(24)
- 1.463 in(1)
- 1.522 in(3)
- 1.561 in(1)
- 1.614 in(6)
- 1.625 in(88)
- 1.679 in(8)
- 1.928 in(1)
- 1.969 in(18)
- 1.971 in(4)
- 1.972 in(2)
- 1.998 in(2)
- 2.056 in(1)
- 2.057 in(1)
- 2.134 in(1)
- 2.165 in(22)
- 2.178 in(6)
- 2.206 in(2)
- 2.285 in(5)
- 2.286 in(2)
- 2.362 in(10)
- 2.375 in(2)
- 2.414 in(1)
- 2.48 in(10)
- 2.5 in(17)
- 2.521 in(1)
- 2.559 in(2)
- 2.6 in(2)
- 2.75 in(7)
- 2.757 in(43)
- 2.766 in(1)
- 2.805 in(1)
- 2.904 in(2)
- 3.0 in(8)
- 3.15 in(20)
- 3.375 in(2)
- 3.5 in(3)
- 3.543 in(43)
- 3.938 in(27)
- 3.95 in(4)
- 3.96 in(3)
- 3.998 in(1)
- 4.0 in(26)
- 4.116 in(1)
- 4.331 in(35)
- 4.375 in(1)
- 4.851 in(2)
- 4.852 in(3)
- 4.892 in(1)
- 4.912 in(2)
- 4.921 in(36)
- 5.0 in(10)
- 5.513 in(43)
- 5.875 in(1)
- 5.876 in(1)
- 5.906 in(22)
- 5.955 in(4)
- 5.995 in(2)
- 6.0 in(64)
- 6.059 in(6)
- 6.694 in(9)
- 7.0 in(2)
- 7.037 in(1)
- 7.057 in(2)
- 7.087 in(3)
- 7.133 in(3)
- 7.136 in(2)
- 7.212 in(1)
- 7.875 in(58)
- 7.928 in(5)
- 7.931 in(2)
- 7.96 in(4)
- 7.974 in(4)
- 7.992 in(3)
- 8.0 in(43)
- 8.012 in(2)
- 8.05 in(1)
- 8.083 in(1)
- 9.843 in(53)
- 9.9 in(6)
- 9.941 in(2)
- 10.0 in(117)
- 11.811 in(53)
- 12.0 in(79)
- 13.781 in(18)
- 14.0 in(98)
- 15.5 in(1)
- 15.749 in(6)
- 16.0 in(52)
- 21.5 in(1)
Over All Length [L] MinZadejte hodnotukomuOver All Length [L] MaxOver All Length [L]
=
Over All Length [L]
Over All Length [L]
- 17.151 mm(34)
- 17.651 mm(12)
- 18.651 mm(2)
- 20.0 mm(2)
- 20.076 mm(2)
- 22.651 mm(6)
- 24.651 mm(4)
- 25.0 mm(3)
- 25.25 mm(1)
- 25.651 mm(2)
- 26.651 mm(2)
- 31.651 mm(6)
- 32.0 mm(1)
- 32.25 mm(3)
- 32.65 mm(12)
- 34.25 mm(4)
- 34.65 mm(14)
- 34.676 mm(1)
- 35.25 mm(7)
- 35.65 mm(24)
- 37.15 mm(1)
- 38.651 mm(3)
- 39.651 mm(1)
- 41.0 mm(6)
- 41.276 mm(88)
- 42.651 mm(8)
- 48.975 mm(1)
- 50.0 mm(18)
- 50.075 mm(4)
- 50.1 mm(2)
- 50.75 mm(2)
- 52.225 mm(1)
- 52.25 mm(1)
- 54.2 mm(1)
- 55.0 mm(22)
- 55.325 mm(6)
- 56.026 mm(2)
- 58.051 mm(5)
- 58.075 mm(2)
- 60.0 mm(10)
- 60.325 mm(2)
- 61.325 mm(1)
- 63.0 mm(10)
- 63.5 mm(17)
- 64.025 mm(1)
- 65.0 mm(2)
- 66.05 mm(2)
- 69.851 mm(7)
- 70.0 mm(43)
- 70.25 mm(1)
- 71.25 mm(1)
- 73.75 mm(2)
- 76.2 mm(8)
- 80.0 mm(20)
- 85.726 mm(2)
- 88.9 mm(3)
- 90.0 mm(43)
- 100.0 mm(27)
- 100.325 mm(4)
- 100.575 mm(3)
- 101.551 mm(1)
- 101.601 mm(26)
- 104.551 mm(1)
- 110.0 mm(35)
- 111.125 mm(1)
- 123.2 mm(2)
- 123.25 mm(3)
- 124.25 mm(1)
- 124.75 mm(2)
- 125.0 mm(36)
- 127.0 mm(10)
- 140.0 mm(43)
- 149.201 mm(1)
- 149.25 mm(1)
- 150.0 mm(22)
- 151.25 mm(4)
- 152.275 mm(2)
- 152.4 mm(64)
- 153.9 mm(6)
- 170.0 mm(9)
- 177.8 mm(2)
- 178.75 mm(1)
- 179.25 mm(2)
- 180.0 mm(3)
- 181.175 mm(3)
- 181.25 mm(2)
- 183.175 mm(1)
- 200.0 mm(58)
- 201.375 mm(5)
- 201.451 mm(2)
- 202.175 mm(4)
- 202.55 mm(4)
- 203.0 mm(3)
- 203.201 mm(43)
- 203.5 mm(2)
- 204.476 mm(1)
- 205.3 mm(1)
- 250.0 mm(53)
- 251.451 mm(6)
- 252.5 mm(2)
- 254.0 mm(117)
- 300.0 mm(53)
- 304.8 mm(79)
- 350.0 mm(18)
- 355.6 mm(98)
- 393.701 mm(1)
- 400.0 mm(6)
- 406.401 mm(52)
- 546.1 mm(1)
Over All Length [L] MinZadejte hodnotukomuOver All Length [L] MaxOver All Length [L]
cornerConfiguration
≈
Corner Radius
Corner Radius
- 0.0 in(115)
- 0.001 in(119)
- 0.002 in(240)
- 0.003 in(14)
- 0.004 in(932)
- 0.005 in(8)
- 0.006 in(14)
- 0.007 in(114)
- 0.008 in(1018)
- 0.01 in(10)
- 0.011 in(3)
- 0.012 in(10)
- 0.014 in(48)
- 0.015 in(104)
- 0.016 in(1225)
- 0.017 in(2)
- 0.019 in(10)
- 0.02 in(8)
- 0.023 in(10)
- 0.024 in(58)
- 0.027 in(1)
- 0.028 in(4)
- 0.031 in(1255)
- 0.035 in(10)
- 0.037 in(2)
- 0.039 in(9)
- -0.039 in(6)
- 0.047 in(907)
- 0.06 in(8)
- 0.062 in(29)
- 0.063 in(610)
- 0.078 in(8)
- 0.079 in(8)
- 0.094 in(54)
- 0.095 in(103)
- 0.098 in(1)
- 0.119 in(1)
- 0.125 in(18)
- 0.126 in(27)
- 0.157 in(6)
- 0.197 in(1)
- 0.25 in(3)
Corner Radius MinZadejte hodnotukomuCorner Radius MaxCorner Radius
≈
Corner Radius
Corner Radius
- 0.0 mm(115)
- 0.025 mm(119)
- 0.05 mm(240)
- 0.076 mm(14)
- 0.1 mm(932)
- 0.125 mm(8)
- 0.151 mm(14)
- 0.176 mm(114)
- 0.2 mm(1018)
- 0.225 mm(8)
- 0.25 mm(10)
- 0.275 mm(3)
- 0.301 mm(10)
- 0.325 mm(10)
- 0.351 mm(48)
- 0.375 mm(104)
- 0.4 mm(1225)
- 0.426 mm(2)
- 0.45 mm(10)
- 0.476 mm(3)
- 0.5 mm(8)
- 0.576 mm(10)
- 0.601 mm(58)
- 0.65 mm(1)
- 0.701 mm(4)
- 0.775 mm(28)
- 0.8 mm(1227)
- 0.9 mm(10)
- 0.925 mm(2)
- 1.0 mm(9)
- -1.0 mm(6)
- 1.201 mm(907)
- 1.5 mm(8)
- 1.576 mm(29)
- 1.6 mm(610)
- 1.975 mm(8)
- 2.0 mm(8)
- 2.375 mm(54)
- 2.401 mm(103)
- 2.5 mm(1)
- 3.0 mm(1)
- 3.176 mm(18)
- 3.2 mm(27)
- 4.0 mm(6)
- 5.0 mm(1)
- 6.351 mm(3)
Corner Radius MinZadejte hodnotukomuCorner Radius MaxCorner Radius
=
Corner Chamfer
Corner Chamfer
- 0.0 mm(120)
Corner Chamfer MinZadejte hodnotukomuCorner Chamfer MaxCorner Chamfer
=
Corner Chamfer
Corner Chamfer
- 0.0 in(120)
Corner Chamfer MinZadejte hodnotukomuCorner Chamfer MaxCorner Chamfer
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (58)
- 241 (21)
- CG5 (37)
- CG6 (12)
- CL4 (30)
- CM1 (12)
- CM2 (54)
- CM3 (36)
- CM4 (32)
- CPX (54)
- CW2 (26)
- CW2015 (110)
- CW5025 (94)
- GX (31)
- HCK10 (2)
- HT2 (23)
- HTX (26)
- K00379 (102)
- K060 (212)
- K090 (102)
- K1 (37)
- K10M (68)
- K10P (70)
- K10U (62)
- K15U (62)
- K20K (68)
- K21 (36)
- K25M (68)
- K25P (60)
- K313 (1133)
- K35P (35)
- K420 (68)
- K45 (48)
- K68 (823)
- KB1340 (246)
- KB1345 (489)
- KB1610 (658)
- KB1625 (42)
- KB1630 (544)
- KB5610 (463)
- KB5625 (42)
- KB5630 (559)
- KB9610 (48)
- KB9640 (31)
- KBH10 (621)
- KBH10B (397)
- KBH20 (900)
- KBH20B (397)
- KBK35 (177)
- KC210 (43)
- KC250 (49)
- KC5010 (1378)
- KC5020P (16)
- KC5025 (1292)
- KC5410 (1043)
- KC5510 (70)
- KC5525 (51)
- KC710 (21)
- KC720 (78)
- KC722 (21)
- KC730 (1257)
- KC7310 (80)
- KC732 (68)
- KC8050 (80)
- KC810 (74)
- KC850 (1188)
- KC9010 (72)
- KC9025 (80)
- KC910 (72)
- KC9105 (70)
- KC9110 (81)
- KC9120 (76)
- KC9125 (146)
- KC9140 (80)
- KC9145 (67)
- KC9215 (72)
- KC9225 (72)
- KC9240 (72)
- KC9240NEW (72)
- KC9245 (72)
- KC9315 (72)
- KC9320 (78)
- KC9325 (70)
- KC935 (80)
- KC950 (72)
- KC990 (80)
- KCD25 (12)
- KCK05 (928)
- KCK05B (424)
- KCK15 (933)
- KCK15B (1030)
- KCK20 (1054)
- KCK20B (944)
- KCM15 (1020)
- KCM15B (930)
- KCM25 (1098)
- KCM25B (1059)
- KCM25S (99)
- KCM35 (792)
- KCM35B (439)
- KCP05 (776)
- KCP05B (577)
- KCP10 (1106)
- KCP10B (1192)
- KCP10C (33)
- KCP15 (14)
- KCP20S (99)
- KCP25 (1160)
- KCP25B (1219)
- KCP25C (1222)
- KCP30 (948)
- KCP30B (525)
- KCP40 (547)
- KCP40B (592)
- KCPK05 (667)
- KCS10 (729)
- KCS10B (1076)
- KCS25S (99)
- KCU10 (1333)
- KCU10B (1367)
- KCU25 (1248)
- KCU25B (1296)
- KD050 (48)
- KD081 (48)
- KD100 (45)
- KD120 (56)
- KD1400 (922)
- KD1405 (520)
- KD1425 (1011)
- KM1 (32)
- KMF (44)
- KN10S (115)
- KS15 (195)
- KT1120 (19)
- KT125 (71)
- KT150 (50)
- KT175 (56)
- KT315 (1172)
- KT325 (360)
- KT5020 (9)
- KTP10 (871)
- KTP25S (615)
- KU10T (60)
- KU30T (78)
- KY1310 (50)
- KY1320 (64)
- KY1540 (226)
- KY1615 (198)
- KY2000 (48)
- KY2100 (33)
- KY3000 (58)
- KY3400 (68)
- KY3500 (586)
- KY4000 (31)
- KY4300 (354)
- KY4400 (592)
- KYHK15B (616)
- KYK10 (360)
- KYK25 (467)
- KYK35 (64)
- KYS25 (241)
- KYS30 (382)
- NL200 (21)
- NL250 (66)
- NL300 (42)
- NL400 (37)
- NL920 (46)
- P25 (27)
- PB100 (65)
- PB250 (2)
- PS5 (23)
- SP0819 (48)
- SP3019 (48)
- SP4019 (59)
- SP4036 (4)
- SP4093 (4)
- SPADAP (4)
- THM (72)
- THM-X (75)
- THMF-X (65)
- TN10P (136)
- TN10U (134)
- TN15M (131)
- TN15U (102)
- TN2000 (99)
- TN20K (136)
- TN20P (145)
- TN30M (135)
- TN30P (94)
- TN4000 (95)
- TN6010 (73)
- TN6025 (2)
- TN7035 (5)
- TTR (1)
- TTS (65)
- W00160 (5)
- W00162 (15)
- WBH10P (104)
- WBH10U (85)
- WBH20P (134)
- WBH30P (151)
- WBK45U (39)
- WDN00U (141)
- WDN25U (146)
- WK05CT (138)
- WK15CT (100)
- WK20CT (180)
- WM15CT (141)
- WM25CT (163)
- WM35CT (101)
- WP05CT (86)
- WP15CT (178)
- WP20TT (2)
- WP25CT (178)
- WP35CT (131)
- WS10PT (143)
- WS25PT (141)
- WU05PT (5)
- WU10HT (143)
- WU10PT (104)
- WU25PT (104)
- X00511 (21)
- X00580 (195)
- X00581 (195)
- X00582 (195)
- X00583 (195)
- X00584 (195)
- X00585 (195)
- X00586 (195)
- X00591 (195)
- X00592 (195)
- X00593 (195)
- X00594 (195)
- X00596 (195)
- X00597 (195)
- X00599 (195)
- YY87EL (23)
Hand Of Tool
Hand Of Tool
- L (508)
- R (802)
Wiper Insert
Wiper Insert
- N (1274)
- Y (639)
=
F Dimension
F Dimension
- 2.401 mm(8)
- 2.651 mm(13)
- 2.825 mm(3)
- 2.95 mm(9)
- 2.975 mm(4)
- 3.026 mm(6)
- 3.075 mm(1)
- 3.1 mm(3)
- 3.125 mm(1)
- 3.176 mm(1)
- 3.2 mm(4)
- 3.426 mm(3)
- 3.6 mm(1)
- 3.625 mm(1)
- 3.676 mm(12)
- 3.7 mm(4)
- 3.725 mm(7)
- 3.801 mm(1)
- 3.85 mm(4)
- 3.95 mm(11)
- 4.425 mm(4)
- 4.7 mm(7)
- 4.75 mm(4)
- 4.801 mm(4)
- 5.351 mm(1)
- 5.426 mm(1)
- 5.45 mm(2)
- 5.551 mm(3)
- 5.575 mm(6)
- 5.601 mm(1)
- 5.801 mm(1)
- 5.875 mm(4)
- 6.0 mm(10)
- 6.351 mm(31)
- 6.551 mm(2)
- 6.601 mm(1)
- 6.875 mm(5)
- 6.926 mm(1)
- 7.0 mm(26)
- 7.525 mm(1)
- 7.926 mm(38)
- 8.875 mm(5)
- 9.0 mm(42)
- 9.525 mm(7)
- 10.3 mm(43)
- 10.326 mm(2)
- 10.875 mm(4)
- 11.0 mm(52)
- 11.101 mm(10)
- 12.701 mm(55)
- 12.875 mm(5)
- 13.0 mm(48)
- 13.101 mm(1)
- 14.275 mm(14)
- 15.875 mm(3)
- 16.25 mm(57)
- 17.0 mm(131)
- 18.276 mm(1)
- 19.05 mm(22)
- 19.425 mm(29)
- 19.451 mm(1)
- 20.3 mm(6)
- 21.875 mm(1)
- 22.0 mm(108)
- 22.475 mm(1)
- 22.6 mm(46)
- 23.0 mm(2)
- 23.276 mm(1)
- 23.8 mm(2)
- 25.0 mm(1)
- 25.401 mm(26)
- 25.776 mm(13)
- 26.8 mm(6)
- 27.0 mm(100)
- 27.8 mm(2)
- 28.276 mm(1)
- 28.576 mm(28)
- 28.675 mm(1)
- 30.0 mm(2)
- 30.8 mm(8)
- 31.75 mm(6)
- 32.4 mm(1)
- 32.525 mm(31)
- 32.551 mm(8)
- 32.801 mm(4)
- 33.65 mm(9)
- 34.801 mm(2)
- 34.926 mm(5)
- 35.0 mm(61)
- 35.801 mm(2)
- 36.275 mm(1)
- 36.676 mm(1)
- 36.975 mm(1)
- 37.801 mm(4)
- 38.875 mm(21)
- 38.901 mm(5)
- 44.45 mm(10)
F Dimension MinZadejte hodnotukomuF Dimension MaxF Dimension
=
F Dimension
F Dimension
- 0.095 in(8)
- 0.105 in(13)
- 0.111 in(3)
- 0.116 in(9)
- 0.117 in(4)
- 0.12 in(6)
- 0.121 in(1)
- 0.122 in(3)
- 0.123 in(1)
- 0.125 in(1)
- 0.126 in(4)
- 0.135 in(3)
- 0.143 in(1)
- 0.144 in(1)
- 0.145 in(12)
- 0.146 in(4)
- 0.147 in(7)
- 0.15 in(1)
- 0.152 in(4)
- 0.156 in(11)
- 0.175 in(4)
- 0.185 in(7)
- 0.187 in(4)
- 0.189 in(4)
- 0.211 in(1)
- 0.214 in(1)
- 0.215 in(2)
- 0.219 in(9)
- 0.221 in(1)
- 0.228 in(1)
- 0.231 in(4)
- 0.237 in(10)
- 0.25 in(31)
- 0.258 in(2)
- 0.26 in(1)
- 0.271 in(5)
- 0.273 in(1)
- 0.276 in(26)
- 0.296 in(1)
- 0.312 in(38)
- 0.35 in(5)
- 0.354 in(42)
- 0.375 in(7)
- 0.406 in(43)
- 0.408 in(2)
- 0.428 in(4)
- 0.433 in(52)
- 0.437 in(10)
- 0.5 in(55)
- 0.507 in(5)
- 0.512 in(48)
- 0.516 in(1)
- 0.562 in(14)
- 0.625 in(3)
- 0.64 in(57)
- 0.669 in(131)
- 0.72 in(1)
- 0.75 in(22)
- 0.765 in(29)
- 0.766 in(1)
- 0.799 in(6)
- 0.861 in(1)
- 0.866 in(108)
- 0.885 in(1)
- 0.89 in(46)
- 0.906 in(2)
- 0.916 in(1)
- 0.937 in(2)
- 0.984 in(1)
- 1.0 in(26)
- 1.016 in(13)
- 1.055 in(6)
- 1.063 in(100)
- 1.094 in(2)
- 1.113 in(1)
- 1.125 in(28)
- 1.129 in(1)
- 1.181 in(2)
- 1.213 in(8)
- 1.25 in(6)
- 1.276 in(1)
- 1.281 in(31)
- 1.282 in(8)
- 1.291 in(4)
- 1.325 in(9)
- 1.37 in(2)
- 1.375 in(5)
- 1.379 in(61)
- 1.409 in(2)
- 1.428 in(1)
- 1.444 in(1)
- 1.456 in(1)
- 1.488 in(4)
- 1.532 in(26)
- 1.75 in(10)
F Dimension MinZadejte hodnotukomuF Dimension MaxF Dimension
=
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 4.575 mm(8)
- 5.176 mm(8)
- 5.275 mm(5)
- 5.551 mm(3)
- 5.7 mm(4)
- 5.775 mm(3)
- 5.801 mm(5)
- 5.851 mm(1)
- 5.95 mm(9)
- 6.0 mm(1)
- 6.176 mm(1)
- 6.2 mm(1)
- 6.601 mm(2)
- 6.775 mm(3)
- 6.9 mm(1)
- 6.976 mm(3)
- 7.051 mm(1)
- 7.075 mm(1)
- 7.101 mm(8)
- 7.25 mm(14)
- 7.426 mm(4)
- 7.5 mm(1)
- 7.525 mm(5)
- 7.601 mm(1)
- 7.625 mm(2)
- 8.15 mm(3)
- 8.8 mm(4)
- 9.05 mm(6)
- 9.1 mm(5)
- 9.15 mm(3)
- 9.201 mm(1)
- 10.5 mm(1)
- 10.55 mm(12)
- 10.951 mm(1)
- 11.0 mm(14)
- 11.125 mm(1)
- 12.201 mm(30)
- 12.451 mm(1)
- 12.9 mm(2)
- 13.0 mm(31)
- 13.675 mm(1)
- 14.3 mm(1)
- 15.25 mm(43)
- 16.0 mm(47)
- 16.5 mm(1)
- 18.55 mm(10)
- 19.55 mm(43)
- 20.0 mm(58)
- 21.375 mm(1)
- 21.6 mm(10)
- 23.625 mm(41)
- 24.901 mm(16)
- 25.0 mm(70)
- 25.401 mm(2)
- 26.0 mm(2)
- 26.151 mm(1)
- 26.925 mm(1)
- 27.0 mm(2)
- 30.0 mm(2)
- 30.225 mm(3)
- 30.475 mm(43)
- 31.0 mm(10)
- 32.0 mm(131)
- 32.676 mm(2)
- 33.0 mm(10)
- 33.025 mm(22)
- 33.275 mm(1)
- 37.0 mm(3)
- 37.35 mm(22)
- 37.4 mm(3)
- 39.375 mm(3)
- 40.0 mm(137)
- 41.0 mm(2)
- 41.276 mm(2)
- 43.0 mm(7)
- 43.301 mm(26)
- 44.7 mm(37)
- 44.95 mm(1)
- 45.0 mm(2)
- 45.975 mm(1)
- 47.0 mm(4)
- 47.625 mm(2)
- 48.0 mm(3)
- 50.0 mm(135)
- 50.801 mm(32)
- 51.0 mm(4)
- 51.051 mm(13)
- 52.0 mm(2)
- 53.0 mm(4)
- 53.975 mm(3)
- 55.0 mm(6)
- 57.151 mm(6)
- 59.0 mm(2)
- 60.0 mm(14)
- 60.95 mm(33)
- 61.0 mm(2)
- 63.0 mm(68)
- 63.5 mm(14)
- 65.0 mm(1)
- 65.825 mm(4)
- 67.3 mm(2)
- 70.0 mm(15)
- 76.95 mm(26)
- 82.551 mm(10)
- 100.0 mm(4)
Minimum Axial Groove Diameter MinZadejte hodnotukomuMinimum Axial Groove Diameter MaxMinimum Axial Groove Diameter
=
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.18 in(8)
- 0.205 in(8)
- 0.209 in(5)
- 0.219 in(3)
- 0.224 in(4)
- 0.227 in(3)
- 0.228 in(5)
- 0.23 in(1)
- 0.234 in(9)
- 0.237 in(1)
- 0.243 in(1)
- 0.244 in(1)
- 0.26 in(2)
- 0.267 in(3)
- 0.272 in(1)
- 0.275 in(3)
- 0.278 in(1)
- 0.279 in(1)
- 0.28 in(8)
- 0.286 in(14)
- 0.292 in(4)
- 0.295 in(1)
- 0.296 in(5)
- 0.299 in(1)
- 0.3 in(2)
- 0.321 in(3)
- 0.347 in(4)
- 0.356 in(6)
- 0.358 in(5)
- 0.36 in(3)
- 0.362 in(1)
- 0.414 in(1)
- 0.416 in(12)
- 0.431 in(1)
- 0.433 in(14)
- 0.438 in(1)
- 0.48 in(30)
- 0.49 in(1)
- 0.508 in(2)
- 0.512 in(31)
- 0.538 in(1)
- 0.564 in(1)
- 0.6 in(43)
- 0.63 in(47)
- 0.65 in(1)
- 0.73 in(10)
- 0.77 in(43)
- 0.787 in(58)
- 0.842 in(1)
- 0.85 in(10)
- 0.93 in(41)
- 0.98 in(16)
- 0.984 in(70)
- 1.0 in(2)
- 1.024 in(2)
- 1.03 in(1)
- 1.06 in(1)
- 1.063 in(2)
- 1.181 in(2)
- 1.19 in(3)
- 1.2 in(43)
- 1.22 in(10)
- 1.26 in(131)
- 1.286 in(2)
- 1.299 in(10)
- 1.3 in(22)
- 1.31 in(1)
- 1.457 in(3)
- 1.47 in(22)
- 1.472 in(3)
- 1.55 in(3)
- 1.575 in(137)
- 1.614 in(2)
- 1.625 in(2)
- 1.693 in(7)
- 1.705 in(26)
- 1.76 in(37)
- 1.77 in(1)
- 1.772 in(2)
- 1.81 in(1)
- 1.85 in(4)
- 1.875 in(2)
- 1.891 in(3)
- 1.969 in(135)
- 2.0 in(32)
- 2.008 in(4)
- 2.011 in(13)
- 2.047 in(2)
- 2.087 in(4)
- 2.125 in(3)
- 2.165 in(6)
- 2.25 in(6)
- 2.323 in(2)
- 2.362 in(14)
- 2.4 in(33)
- 2.402 in(2)
- 2.48 in(68)
- 2.5 in(14)
- 2.559 in(1)
- 2.592 in(4)
- 2.65 in(2)
- 2.757 in(15)
- 3.031 in(26)
- 3.25 in(10)
- 3.938 in(4)
Minimum Axial Groove Diameter MinZadejte hodnotukomuMinimum Axial Groove Diameter MaxMinimum Axial Groove Diameter
=
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -0.039 in(6)
- 1.181 in(2)
- 1.379 in(2)
- 1.575 in(2)
- 1.969 in(2)
- 393.661 in(10)
Maximum Axial Groove Diameter MinZadejte hodnotukomuMaximum Axial Groove Diameter MaxMaximum Axial Groove Diameter
=
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(6)
- 30.0 mm(2)
- 35.0 mm(2)
- 40.0 mm(2)
- 50.0 mm(2)
- 9999.0 mm(10)
Maximum Axial Groove Diameter MinZadejte hodnotukomuMaximum Axial Groove Diameter MaxMaximum Axial Groove Diameter
Cutting Direction
Cutting Direction
- B (624)
- E (613)
- P (19)
- S (54)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (588)
- DOUBLE POSITIVE (3)
- NEGATIVE-ZERO (387)
- NEUTRAL (ZERO) (123)
- POSITIVE-NEGATIVE (37)
- POSITIVE-ZERO (142)
=
Maximum Bore Depth
Maximum Bore Depth
- 0.484 in(1)
- 0.5 in(7)
- 0.63 in(2)
- 0.675 in(34)
- 0.75 in(7)
- 0.787 in(2)
- 0.875 in(3)
- 0.935 in(3)
- 0.946 in(6)
- 0.982 in(1)
- 0.984 in(1)
- 1.0 in(16)
- 1.018 in(1)
- 1.122 in(1)
- 1.124 in(3)
- 1.125 in(6)
- 1.181 in(5)
- 1.25 in(10)
- 1.26 in(14)
- 1.379 in(2)
- 1.385 in(3)
- 1.417 in(9)
- 1.43 in(1)
- 1.498 in(3)
- 1.499 in(13)
- 1.5 in(17)
- 1.508 in(3)
- 1.563 in(2)
- 1.575 in(17)
- 1.609 in(1)
- 1.625 in(1)
- 1.655 in(1)
- 1.661 in(6)
- 1.679 in(8)
- 1.701 in(2)
- 1.873 in(5)
- 1.875 in(16)
- 1.891 in(31)
- 1.907 in(2)
- 1.938 in(2)
- 1.969 in(5)
- 1.986 in(2)
- 2.0 in(29)
- 2.169 in(11)
- 2.205 in(2)
- 2.209 in(6)
- 2.249 in(2)
- 2.25 in(12)
- 2.283 in(4)
- 2.311 in(1)
- 2.362 in(21)
- 2.382 in(4)
- 2.444 in(3)
- 2.499 in(11)
- 2.5 in(30)
- 2.52 in(31)
- 2.757 in(9)
- 2.77 in(1)
- 2.775 in(4)
- 2.835 in(8)
- 2.953 in(2)
- 2.955 in(11)
- 2.992 in(1)
- 2.993 in(6)
- 3.0 in(48)
- 3.037 in(4)
- 3.044 in(8)
- 3.124 in(2)
- 3.125 in(6)
- 3.132 in(1)
- 3.15 in(39)
- 3.152 in(2)
- 3.2 in(4)
- 3.434 in(6)
- 3.473 in(8)
- 3.476 in(2)
- 3.485 in(2)
- 3.5 in(1)
- 3.593 in(2)
- 3.594 in(2)
- 3.749 in(2)
- 3.75 in(18)
- 3.781 in(12)
- 3.789 in(7)
- 3.938 in(76)
- 4.0 in(55)
- 4.11 in(4)
- 4.412 in(10)
- 4.418 in(2)
- 4.464 in(1)
- 4.5 in(18)
- 4.612 in(10)
- 4.621 in(1)
- 4.724 in(5)
- 4.738 in(10)
- 4.992 in(13)
- 5.0 in(27)
- 5.039 in(69)
- 5.284 in(2)
- 5.513 in(2)
- 5.883 in(8)
- 6.0 in(65)
- 6.299 in(68)
- 6.992 in(5)
- 7.0 in(8)
- 7.875 in(50)
- 8.0 in(41)
- 10.0 in(40)
- 12.5 in(18)
- 15.0 in(22)
- 17.5 in(6)
- 20.0 in(15)
- 25.0 in(8)
Maximum Bore Depth MinZadejte hodnotukomuMaximum Bore Depth MaxMaximum Bore Depth
=
Maximum Bore Depth
Maximum Bore Depth
- 12.3 mm(1)
- 12.701 mm(7)
- 16.0 mm(2)
- 17.151 mm(34)
- 19.05 mm(7)
- 20.0 mm(2)
- 22.225 mm(3)
- 23.75 mm(3)
- 24.0 mm(6)
- 24.951 mm(1)
- 25.0 mm(1)
- 25.401 mm(16)
- 25.826 mm(1)
- 28.5 mm(1)
- 28.55 mm(3)
- 28.576 mm(6)
- 30.0 mm(5)
- 31.75 mm(10)
- 32.0 mm(14)
- 35.0 mm(2)
- 35.15 mm(3)
- 36.0 mm(9)
- 36.325 mm(1)
- 38.051 mm(3)
- 38.075 mm(13)
- 38.1 mm(17)
- 38.301 mm(3)
- 39.7 mm(2)
- 40.0 mm(17)
- 40.875 mm(1)
- 41.276 mm(1)
- 42.0 mm(1)
- 42.2 mm(6)
- 42.651 mm(8)
- 43.2 mm(2)
- 47.575 mm(5)
- 47.625 mm(16)
- 48.0 mm(31)
- 48.45 mm(2)
- 49.225 mm(2)
- 50.0 mm(5)
- 50.45 mm(2)
- 50.801 mm(29)
- 55.1 mm(11)
- 56.0 mm(2)
- 56.1 mm(6)
- 57.125 mm(2)
- 57.151 mm(12)
- 58.0 mm(4)
- 58.7 mm(1)
- 60.0 mm(21)
- 60.475 mm(4)
- 62.075 mm(3)
- 63.475 mm(11)
- 63.5 mm(30)
- 64.0 mm(31)
- 70.0 mm(1)
- 70.025 mm(8)
- 70.351 mm(1)
- 70.476 mm(4)
- 72.0 mm(8)
- 75.0 mm(2)
- 75.05 mm(11)
- 76.0 mm(1)
- 76.025 mm(6)
- 76.2 mm(48)
- 77.15 mm(4)
- 77.325 mm(8)
- 79.351 mm(2)
- 79.375 mm(6)
- 79.551 mm(1)
- 80.0 mm(39)
- 80.051 mm(2)
- 81.25 mm(4)
- 87.226 mm(6)
- 88.226 mm(8)
- 88.301 mm(2)
- 88.525 mm(2)
- 88.9 mm(1)
- 91.25 mm(2)
- 91.275 mm(2)
- 95.226 mm(2)
- 95.25 mm(18)
- 96.0 mm(6)
- 96.025 mm(6)
- 96.25 mm(7)
- 100.0 mm(76)
- 101.601 mm(55)
- 104.4 mm(4)
- 112.075 mm(10)
- 112.226 mm(2)
- 113.375 mm(1)
- 114.301 mm(18)
- 117.15 mm(10)
- 117.375 mm(1)
- 120.0 mm(5)
- 120.351 mm(10)
- 126.801 mm(13)
- 127.0 mm(27)
- 128.0 mm(69)
- 134.201 mm(2)
- 140.0 mm(2)
- 149.4 mm(8)
- 152.4 mm(65)
- 160.0 mm(68)
- 177.601 mm(5)
- 177.8 mm(8)
- 200.0 mm(50)
- 203.201 mm(41)
- 254.0 mm(40)
- 317.5 mm(18)
- 381.0 mm(22)
- 444.5 mm(6)
- 508.0 mm(15)
- 635.0 mm(8)
Maximum Bore Depth MinZadejte hodnotukomuMaximum Bore Depth MaxMaximum Bore Depth
Boring Bar Material
Boring Bar Material
- C (174)
- H (35)
- S (1101)
frontEnd
Clamp Style
Clamp Style
- C (51)
- D (99)
- M (429)
- N (17)
- P (116)
- S (684)
- Y (42)
=
Cutting Width
Cutting Width
- 0.039 in(8)
- 0.047 in(8)
- 0.06 in(8)
- 0.062 in(8)
- 0.069 in(8)
- 0.073 in(8)
- 0.078 in(8)
- 0.079 in(8)
- 0.088 in(8)
- 0.089 in(5)
- 0.094 in(3)
- 0.095 in(8)
- 0.097 in(8)
- 0.098 in(8)
- 0.105 in(8)
- 0.108 in(8)
- 0.11 in(8)
- 0.119 in(10)
- 0.122 in(8)
- 0.125 in(10)
- 0.126 in(8)
- 0.128 in(8)
- 0.131 in(3)
- 0.138 in(10)
- 0.143 in(8)
- 0.156 in(8)
- 0.157 in(10)
- 0.167 in(10)
- 0.177 in(10)
- 0.178 in(8)
- 0.185 in(8)
- 0.188 in(10)
- 0.189 in(10)
- 0.192 in(3)
- 0.193 in(3)
- 0.195 in(8)
- 0.196 in(8)
- 0.197 in(2)
- 0.213 in(2)
- 0.217 in(2)
- 0.237 in(2)
- 0.25 in(2)
- 0.256 in(2)
- 0.384 in(1)
Cutting Width MinZadejte hodnotukomuCutting Width MaxCutting Width
=
Cutting Width
Cutting Width
- 1.0 mm(8)
- 1.201 mm(8)
- 1.5 mm(8)
- 1.576 mm(8)
- 1.75 mm(8)
- 1.826 mm(8)
- 1.975 mm(8)
- 2.0 mm(8)
- 2.2 mm(8)
- 2.225 mm(8)
- 2.25 mm(5)
- 2.375 mm(3)
- 2.401 mm(8)
- 2.475 mm(8)
- 2.5 mm(8)
- 2.676 mm(8)
- 2.75 mm(8)
- 2.801 mm(8)
- 3.0 mm(10)
- 3.1 mm(8)
- 3.176 mm(10)
- 3.2 mm(8)
- 3.25 mm(8)
- 3.325 mm(3)
- 3.5 mm(10)
- 3.6 mm(8)
- 3.95 mm(8)
- 3.975 mm(3)
- 4.0 mm(10)
- 4.25 mm(10)
- 4.5 mm(10)
- 4.525 mm(8)
- 4.7 mm(8)
- 4.775 mm(10)
- 4.801 mm(10)
- 4.875 mm(3)
- 4.9 mm(3)
- 4.95 mm(8)
- 4.976 mm(8)
- 5.0 mm(2)
- 5.4 mm(2)
- 5.5 mm(2)
- 6.0 mm(2)
- 6.351 mm(2)
- 6.5 mm(2)
- 9.75 mm(1)
Cutting Width MinZadejte hodnotukomuCutting Width MaxCutting Width
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (572)
- D-DIAMOND/RHOMBIC 55 (305)
- LT-TRIANGLE LAY DOWN THREAD 60 (7)
- PRISMATIC (42)
- R-ROUND (5)
- S-SQUARE 90 (52)
- T-TRIANGLE 60 (244)
- TN-TOP NOTCH (11)
- V-DIAMOND/RHOMBIC 35 (77)
- W-TRIGON 80 (124)
Cartridge Size
Cartridge Size
- 06 - mm of Cutting Height (4)
- 08 - mm of Cutting Height (17)
- 10 - mm of Cutting Height (27)
- 12 - mm of Cutting Height (30)
- 16 - mm of Cutting Height (14)
- 20 - mm of Cutting Height (15)
- 25 - mm of Cutting Height (4)
Insert Size
Insert Size
- 2 (8)
- 3 (14)
- 4 (10)
- 5 (6)
- 6 (4)
=
Maximum Cutting Depth
Maximum Cutting Depth
- 0.098 in(2)
- 0.11 in(2)
- 0.113 in(1)
- 0.119 in(3)
- 0.122 in(2)
- 0.126 in(2)
- 0.13 in(2)
- 0.146 in(2)
- 0.169 in(2)
- 0.177 in(3)
- 0.178 in(4)
- 0.183 in(2)
- 0.184 in(2)
- 0.187 in(6)
- 0.193 in(2)
- 0.197 in(1)
- 0.238 in(4)
- 0.25 in(4)
- 0.276 in(10)
- 0.277 in(8)
- 0.394 in(12)
- 0.395 in(12)
- 0.473 in(16)
- 0.551 in(4)
Maximum Cutting Depth MinZadejte hodnotukomuMaximum Cutting Depth MaxMaximum Cutting Depth
=
Maximum Cutting Depth
Maximum Cutting Depth
- 2.5 mm(2)
- 2.801 mm(2)
- 2.875 mm(1)
- 3.0 mm(3)
- 3.1 mm(2)
- 3.2 mm(2)
- 3.301 mm(2)
- 3.7 mm(2)
- 4.3 mm(2)
- 4.5 mm(3)
- 4.525 mm(4)
- 4.65 mm(2)
- 4.675 mm(2)
- 4.75 mm(6)
- 4.9 mm(2)
- 5.0 mm(1)
- 6.025 mm(4)
- 6.351 mm(4)
- 7.0 mm(10)
- 7.025 mm(8)
- 10.0 mm(12)
- 10.025 mm(12)
- 12.0 mm(16)
- 14.0 mm(4)
Maximum Cutting Depth MinZadejte hodnotukomuMaximum Cutting Depth MaxMaximum Cutting Depth
Gage Length
Gage Length
- 10 in(3)
- 18 in(3)
- 11 in(2)
- 12 in(2)
- 14 in(2)
- 15 in(2)
- 16 in(2)
- 9 in(2)
- 13 in(1)
- 17 in(1)
- 20 in(1)
- 24 in(1)
- 8 in(1)
- 7.945 in(1)
- 8.268 in(1)
- 9.843 in(1)
- 10.236 in(1)
- 11.811 in(1)
- 12.015 in(1)
- 12.205 in(2)
- 13.781 in(1)
- 14.015 in(1)
- 14.173 in(1)
- 16.13 in(1)
- 16.142 in(1)
- 16.63 in(1)
- 19.375 in(1)
- 19.382 in(1)
- 23.375 in(1)
- 26.133 in(1)
- 26.37 in(2)
- 26.574 in(1)
- 32.335 in(1)
- 33.382 in(1)
- 33.582 in(1)
- 40.37 in(1)
- 41.12 in(1)
- 42.9 in(1)
- 54.481 in(1)
- 54.582 in(1)
- 55.484 in(1)
Gage Length
Gage Length
- 254 mm(3)
- 310 mm(2)
- 381 mm(2)
- 210 mm(1)
- 250 mm(1)
- 260 mm(1)
- 300 mm(1)
- 350 mm(1)
- 360 mm(1)
- 410 mm(1)
- 508 mm(1)
- 201.8 mm(1)
- 203.201 mm(1)
- 228.601 mm(2)
- 279.401 mm(2)
- 304.8 mm(2)
- 305.151 mm(1)
- 330.201 mm(1)
- 355.6 mm(2)
- 355.951 mm(1)
- 406.401 mm(2)
- 409.701 mm(1)
- 422.401 mm(1)
- 431.8 mm(1)
- 457.201 mm(3)
- 492.125 mm(1)
- 492.3 mm(1)
- 593.725 mm(1)
- 609.6 mm(1)
- 663.776 mm(1)
- 669.801 mm(2)
- 674.975 mm(1)
- 821.301 mm(1)
- 847.901 mm(1)
- 852.975 mm(1)
- 1025.4 mm(1)
- 1044.45 mm(1)
- 1089.65 mm(1)
- 1383.801 mm(1)
- 1386.375 mm(1)
- 1409.301 mm(1)
=
Minimum Groove Diameter
Minimum Groove Diameter
- 1.024 in(2)
- 1.181 in(2)
- 1.299 in(2)
- 1.614 in(2)
Minimum Groove Diameter MinZadejte hodnotukomuMinimum Groove Diameter MaxMinimum Groove Diameter
=
Minimum Groove Diameter
Minimum Groove Diameter
- 26.0 mm(2)
- 30.0 mm(2)
- 33.0 mm(2)
- 41.0 mm(2)
Minimum Groove Diameter MinZadejte hodnotukomuMinimum Groove Diameter MaxMinimum Groove Diameter
=
Maximum Groove Diameter
Maximum Groove Diameter
- 30.0 mm(2)
- 35.0 mm(2)
- 40.0 mm(2)
- 50.0 mm(2)
Maximum Groove Diameter MinZadejte hodnotukomuMaximum Groove Diameter MaxMaximum Groove Diameter
=
Maximum Groove Diameter
Maximum Groove Diameter
- 1.181 in(2)
- 1.379 in(2)
- 1.575 in(2)
- 1.969 in(2)
Maximum Groove Diameter MinZadejte hodnotukomuMaximum Groove Diameter MaxMaximum Groove Diameter
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (912)
- B L (1008)
- C A (629)
- C N (610)
- D P (1069)
- H T (1203)
- H W (1386)
backEnd
Connection Type
Connection Type
- BORING BAR (850)
- BORING BAR HEAD (206)
- TAPER SHANK (220)
System Size
System Size
- KM32 (17)
- KM32TS (3)
- KM40TS (80)
- KM50TS (65)
- KM63TS (55)
=
Back-End Diameter
Back-End Diameter
- 3.95 mm(3)
- 4.0 mm(3)
- 4.75 mm(17)
- 5.0 mm(7)
- 6.0 mm(14)
- 6.351 mm(18)
- 7.926 mm(9)
- 7.95 mm(9)
- 8.0 mm(24)
- 9.525 mm(54)
- 10.0 mm(30)
- 12.0 mm(43)
- 12.701 mm(55)
- 15.875 mm(56)
- 16.0 mm(41)
- 19.0 mm(1)
- 19.05 mm(58)
- 20.0 mm(33)
- 22.225 mm(1)
- 25.0 mm(80)
- 25.401 mm(86)
- 31.701 mm(14)
- 31.75 mm(47)
- 32.0 mm(108)
- 38.1 mm(80)
- 40.0 mm(164)
- 44.401 mm(6)
- 44.45 mm(17)
- 50.0 mm(126)
- 50.801 mm(61)
- 60.0 mm(1)
- 63.0 mm(55)
- 63.5 mm(42)
- 76.2 mm(4)
- 80.0 mm(1)
- 100.0 mm(1)
- 101.601 mm(2)
Back-End Diameter MinZadejte hodnotukomuBack-End Diameter MaxBack-End Diameter
=
Back-End Diameter
Back-End Diameter
- 0.156 in(3)
- 0.157 in(3)
- 0.187 in(17)
- 0.197 in(7)
- 0.237 in(14)
- 0.25 in(18)
- 0.312 in(9)
- 0.313 in(9)
- 0.315 in(24)
- 0.375 in(54)
- 0.394 in(30)
- 0.473 in(43)
- 0.5 in(55)
- 0.625 in(56)
- 0.63 in(41)
- 0.748 in(1)
- 0.75 in(58)
- 0.787 in(33)
- 0.875 in(1)
- 0.984 in(80)
- 1.0 in(86)
- 1.248 in(14)
- 1.25 in(47)
- 1.26 in(108)
- 1.5 in(80)
- 1.575 in(164)
- 1.748 in(6)
- 1.75 in(17)
- 1.969 in(126)
- 2.0 in(61)
- 2.362 in(1)
- 2.48 in(55)
- 2.5 in(42)
- 3.0 in(4)
- 3.15 in(1)
- 3.938 in(1)
- 4.0 in(2)
Back-End Diameter MinZadejte hodnotukomuBack-End Diameter MaxBack-End Diameter
=
Shank Height
Shank Height
- 0.301 in(2)
- 0.37 in(4)
- 0.449 in(18)
- 0.572 in(2)
- 0.606 in(8)
- 0.727 in(2)
- 0.764 in(10)
- 0.851 in(1)
- 0.939 in(10)
- 0.955 in(2)
- 0.977 in(3)
- 1.181 in(2)
- 1.204 in(1)
- 1.214 in(3)
- 1.227 in(1)
- 1.454 in(3)
- 1.477 in(1)
- 1.53 in(3)
- 1.631 in(4)
- 1.848 in(8)
- 1.881 in(7)
- 1.94 in(1)
- 2.38 in(1)
Shank Height MinZadejte hodnotukomuShank Height MaxShank Height
=
Shank Height
Shank Height
- 7.65 mm(2)
- 9.4 mm(4)
- 11.4 mm(18)
- 14.5 mm(2)
- 15.4 mm(8)
- 18.475 mm(2)
- 19.401 mm(10)
- 21.625 mm(1)
- 23.826 mm(10)
- 24.225 mm(2)
- 24.826 mm(3)
- 30.0 mm(2)
- 30.576 mm(1)
- 30.826 mm(3)
- 31.175 mm(1)
- 36.926 mm(3)
- 37.525 mm(1)
- 38.825 mm(3)
- 41.401 mm(4)
- 46.95 mm(8)
- 47.75 mm(7)
- 49.276 mm(1)
- 60.45 mm(1)
Shank Height MinZadejte hodnotukomuShank Height MaxShank Height
=
Shank Width
Shank Width
- 0.591 in(2)
- 0.864 in(10)
- 0.88 in(2)
- 1.113 in(1)
- 1.141 in(3)
- 1.181 in(2)
- 1.381 in(3)
- 1.455 in(3)
- 1.631 in(4)
- 1.848 in(8)
- 1.881 in(7)
- 2.38 in(1)
Shank Width MinZadejte hodnotukomuShank Width MaxShank Width
=
Shank Width
Shank Width
- 15.0 mm(2)
- 21.951 mm(10)
- 22.35 mm(2)
- 28.276 mm(1)
- 28.951 mm(3)
- 30.0 mm(2)
- 35.051 mm(3)
- 36.95 mm(3)
- 41.401 mm(4)
- 46.95 mm(8)
- 47.75 mm(7)
- 60.45 mm(1)
Shank Width MinZadejte hodnotukomuShank Width MaxShank Width
No filters matching ""
