Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

K-Lock™ Profiling

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (89)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(89)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(89)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(89)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(89)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(89)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(89)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(89)
    • M Stainless Steel (95)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(95)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(95)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(95)
    • K Cast Iron (85)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(85)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(85)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(85)
    • N Non-Ferrous Materials (90)
      • N1
        Wrought Aluminum (90)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(90)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (90)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (90)
      • N6
        Carbon, Graphite Composites, CFRP (86)
      • N7
        MMC's (50)
    • S High-Temp Alloys (99)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(99)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(99)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(99)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(99)
    • H Hardened Materials (81)
      • H1
        Hardened Materials 44-48 HRC(81)
      • H2
        Hardened Materials 48-55 HRC(73)
    • C CFRP Materials (71)
      • C1
        CFRP, CFRP / CFRP (67)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (50)
    Applications
    Applications
    • CRT ProfilingCRT Profiling (18)
    • Deep GroovingDeep Grooving (18)
    • Multiple Direction CuttingMultiple Direction Cutting (52)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (43)
    • Lightly Interrupted Cut (68)
    • Smooth Cut (80)
    • Varying Depth of Cut (80)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 60.0 (4)
    • 90.0 (49)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Toolholder (35)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (87)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.138 in(5)
    • 2.638 in(6)
    • 2.888 in(3)
    • 3.338 in(2)
    • 3.638 in(2)
    • 5.906 in(3)
    • 6.0 in(23)
    • 6.694 in(1)
    • 7.0 in(8)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 54.301 mm(5)
    • 67.0 mm(6)
    • 73.351 mm(3)
    • 84.775 mm(2)
    • 92.4 mm(2)
    • 150.0 mm(3)
    • 152.4 mm(23)
    • 170.0 mm(1)
    • 177.8 mm(8)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.094 in(25)
    • 0.125 in(35)
    • 0.188 in(28)
    • 0.25 in(16)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 2.375 mm(25)
    • 3.176 mm(35)
    • 4.775 mm(28)
    • 6.351 mm(16)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(69)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(69)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (56)
    • KC5010 (60)
    • KC5025 (40)
    • KC5410 (55)
    • KC5510 (20)
    • KC730 (56)
    • KC7310 (52)
    • KC732 (52)
    • KC8050 (52)
    • KC910 (52)
    • KC9110 (13)
    • KC9225 (52)
    • KC935 (52)
    • KCP25B (41)
    • KCS10 (56)
    • KCS10B (56)
    • KCU10 (61)
    • KCU10B (64)
    • KCU25 (13)
    • KCU25B (14)
    • KT315 (39)
    Hand Of Tool
    Hand Of Tool
    • L (13)
    • R (22)
    Wiper Insert
    Wiper Insert
    • N (87)
    F Dimension
    F Dimension
    • 25.401 mm(1)
    • 25.475 mm(2)
    • 25.5 mm(3)
    • 25.8 mm(2)
    • 25.901 mm(2)
    • 26.225 mm(2)
    • 31.826 mm(2)
    • 32.15 mm(2)
    • 32.25 mm(2)
    • 32.575 mm(2)
    • 38.1 mm(1)
    • 38.176 mm(2)
    • 38.5 mm(2)
    • 38.6 mm(2)
    • 38.926 mm(2)
    • 41.276 mm(1)
    • 44.45 mm(2)
    • 47.625 mm(2)
    • 50.801 mm(1)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 1.0 in(1)
    • 1.004 in(5)
    • 1.016 in(2)
    • 1.02 in(2)
    • 1.032 in(2)
    • 1.254 in(2)
    • 1.266 in(2)
    • 1.27 in(2)
    • 1.282 in(2)
    • 1.5 in(1)
    • 1.504 in(2)
    • 1.516 in(2)
    • 1.52 in(2)
    • 1.534 in(2)
    • 1.625 in(1)
    • 1.75 in(2)
    • 1.875 in(2)
    • 2.0 in(1)
    F Dimension MinkomuF Dimension Max
    Cutting Direction
    Cutting Direction
    • B (21)
    • E (7)
    • S (7)
    Rake Angle Style
    Rake Angle Style
    • NEUTRAL (ZERO) (34)
    frontEnd
    Clamp Style
    Clamp Style
    • T (53)
    Cartridge Size
    Cartridge Size
    • 50 (18)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.5 in(8)
    • 0.548 in(2)
    • 0.75 in(18)
    • 0.787 in(4)
    • 0.842 in(2)
    • 1.0 in(6)
    • 1.25 in(6)
    • 1.5 in(3)
    • 1.95 in(2)
    • 2.25 in(2)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 12.701 mm(8)
    • 13.925 mm(2)
    • 19.05 mm(18)
    • 20.0 mm(4)
    • 21.375 mm(2)
    • 25.401 mm(6)
    • 31.75 mm(6)
    • 38.1 mm(3)
    • 49.526 mm(2)
    • 57.151 mm(2)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    insertGeometry
    Shape
    Shape
    • R-ROUND (52)
    Insert IC Size
    Insert IC Size
    • 4.75 mm(12)
    • 6.351 mm(15)
    • 9.525 mm(15)
    • 12.701 mm(10)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.187 in(12)
    • 0.25 in(15)
    • 0.375 in(15)
    • 0.5 in(10)
    Insert IC Size MinkomuInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • FS (16)
    • HP (14)
    • MP (4)
    Cutting Tool Material
    Cutting Tool Material
    • H T (39)
    • H W (104)
    Tolerance Class
    Tolerance Class
    • G (30)
    • M (22)
    backEnd
    Connection Type
    Connection Type
    • SQUARE SHANK (35)
    Shank Height
    Shank Height
    • 0.984 in(3)
    • 1.0 in(12)
    • 1.25 in(11)
    • 1.26 in(1)
    • 1.5 in(8)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 25.0 mm(3)
    • 25.401 mm(12)
    • 31.75 mm(11)
    • 32.0 mm(1)
    • 38.1 mm(8)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.984 in(4)
    • 1.0 in(12)
    • 1.25 in(11)
    • 1.5 in(8)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 25.0 mm(4)
    • 25.401 mm(12)
    • 31.75 mm(11)
    • 38.1 mm(8)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    Břitové destičky
    (52)

    Břitové destičky

    Držáky nástrojů K-LOCK
    (35)

    Držáky nástrojů K-LOCK

    Modulární nože K-LOCK
    (18)

    Modulární nože K-LOCK

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk