Profilování TOP NOTCH™

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (371)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(371)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(371)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(371)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(371)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(371)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(371)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(371)
    • M Stainless Steel (317)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(317)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(317)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(317)
    • K Cast Iron (244)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(244)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(244)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(244)
    • N Non-Ferrous Materials (216)
      • N1
        Wrought Aluminum (186)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(181)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(101)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (216)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (195)
      • N6
        Carbon, Graphite Composites, CFRP (170)
      • N7
        MMC's (93)
    • S High-Temp Alloys (319)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(319)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(319)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(319)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(302)
    • H Hardened Materials (52)
      • H1
        Hardened Materials 44-48 HRC(52)
      • H2
        Hardened Materials 48-55 HRC(45)
    • C CFRP Materials (159)
      • C1
        CFRP, CFRP / CFRP (148)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (93)
    Applications
    Applications
    • Face GroovingFace Grooving (63)
    • FacingFacing (6)
    • ID FacingID Facing (6)
    • Multiple Direction CuttingMultiple Direction Cutting (100)
    • ProfilingProfiling (6)
    • TRN BoringTRN Boring (6)
    • TurningTurning (6)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (87)
    • Lightly Interrupted Cut (145)
    • Smooth Cut (215)
    • Varying Depth of Cut (107)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 62.5 (2)
    • 72.5 (2)
    • 93.0 (1)
    • 95.0 (77)
    • 100.0 (1)
    • 107.5 (9)
    • 117.5 (8)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Bolt-On Head (2)
    • Boring Bar Shank (42)
    • Toolholder (56)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.75 in(2)
    • 3.15 in(1)
    • 3.5 in(2)
    • 3.938 in(2)
    • 4.0 in(2)
    • 4.5 in(10)
    • 4.921 in(10)
    • 5.0 in(4)
    • 5.906 in(15)
    • 6.0 in(12)
    • 6.694 in(2)
    • 7.087 in(2)
    • 7.263 in(2)
    • 7.875 in(2)
    • 8.0 in(2)
    • 8.055 in(1)
    • 8.132 in(2)
    • 8.15 in(1)
    • 9.843 in(4)
    • 10.0 in(7)
    • 10.063 in(2)
    • 10.095 in(2)
    • 11.811 in(2)
    • 12.0 in(5)
    • 13.781 in(1)
    • 14.0 in(2)
    • 14.07 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 19.05 mm(2)
    • 80.0 mm(1)
    • 88.9 mm(2)
    • 100.0 mm(2)
    • 101.601 mm(2)
    • 114.301 mm(10)
    • 125.0 mm(10)
    • 127.0 mm(4)
    • 150.0 mm(15)
    • 152.4 mm(12)
    • 170.0 mm(2)
    • 180.0 mm(2)
    • 184.451 mm(2)
    • 200.0 mm(2)
    • 203.201 mm(2)
    • 204.601 mm(1)
    • 206.55 mm(2)
    • 207.0 mm(1)
    • 250.0 mm(4)
    • 254.0 mm(7)
    • 255.601 mm(2)
    • 256.401 mm(2)
    • 300.0 mm(2)
    • 304.8 mm(5)
    • 350.0 mm(1)
    • 355.6 mm(2)
    • 357.375 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.005 in(81)
    • 0.008 in(128)
    • 0.016 in(221)
    • 0.02 in(88)
    • 0.031 in(204)
    • 0.039 in(68)
    • 0.047 in(46)
    • 0.063 in(34)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.125 mm(81)
    • 0.2 mm(128)
    • 0.4 mm(221)
    • 0.5 mm(88)
    • 0.8 mm(204)
    • 1.0 mm(68)
    • 1.201 mm(46)
    • 1.6 mm(34)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(337)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(337)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K00326 (29)
    • K313 (105)
    • K420 (60)
    • K6 (4)
    • K68 (116)
    • K8735 (29)
    • KB1345 (25)
    • KC250 (82)
    • KC5010 (129)
    • KC5025 (113)
    • KC5410 (91)
    • KC720 (29)
    • KC730 (113)
    • KC7310 (87)
    • KC732 (94)
    • KC8050 (100)
    • KC810 (100)
    • KC850 (119)
    • KC9025 (94)
    • KC910 (89)
    • KC9105 (62)
    • KC9110 (100)
    • KC9120 (34)
    • KC9125 (100)
    • KC9225 (100)
    • KC9315 (89)
    • KC935 (94)
    • KC950 (94)
    • KCD25 (29)
    • KCK05 (37)
    • KCK15B (31)
    • KCM15B (59)
    • KCM25 (100)
    • KCM25B (5)
    • KCP05 (93)
    • KCP10 (106)
    • KCP10B (89)
    • KCP25 (106)
    • KCP25B (95)
    • KCP25C (132)
    • KCS10B (33)
    • KCU10 (134)
    • KCU10B (144)
    • KCU25 (127)
    • KCU25B (95)
    • KD050 (82)
    • KD081 (29)
    • KD100 (94)
    • KD120 (86)
    • KD1425 (101)
    • KS15 (29)
    • KT125 (82)
    • KT150 (87)
    • KT175 (53)
    • KT315 (111)
    Hand Of Tool
    Hand Of Tool
    • L (41)
    • N (4)
    • R (55)
    F Dimension
    F Dimension
    • 8.875 mm(2)
    • 9.0 mm(2)
    • 9.4 mm(2)
    • 9.525 mm(4)
    • 10.875 mm(1)
    • 11.0 mm(2)
    • 12.5 mm(1)
    • 12.576 mm(4)
    • 12.625 mm(1)
    • 12.701 mm(3)
    • 13.0 mm(2)
    • 14.275 mm(6)
    • 15.875 mm(2)
    • 16.0 mm(3)
    • 17.0 mm(1)
    • 18.925 mm(2)
    • 19.05 mm(7)
    • 19.425 mm(1)
    • 20.0 mm(2)
    • 22.0 mm(4)
    • 25.0 mm(8)
    • 25.401 mm(8)
    • 27.0 mm(1)
    • 28.451 mm(1)
    • 28.576 mm(2)
    • 31.75 mm(9)
    • 32.0 mm(14)
    • 35.0 mm(1)
    • 38.1 mm(2)
    • 50.801 mm(2)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.35 in(2)
    • 0.354 in(2)
    • 0.37 in(2)
    • 0.375 in(4)
    • 0.428 in(1)
    • 0.433 in(2)
    • 0.492 in(1)
    • 0.495 in(4)
    • 0.497 in(1)
    • 0.5 in(3)
    • 0.512 in(2)
    • 0.562 in(6)
    • 0.625 in(2)
    • 0.63 in(3)
    • 0.669 in(1)
    • 0.745 in(2)
    • 0.75 in(7)
    • 0.765 in(1)
    • 0.787 in(2)
    • 0.866 in(4)
    • 0.984 in(8)
    • 1.0 in(8)
    • 1.063 in(1)
    • 1.12 in(1)
    • 1.125 in(2)
    • 1.25 in(9)
    • 1.26 in(14)
    • 1.379 in(1)
    • 1.5 in(2)
    • 2.0 in(2)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 16.0 mm(4)
    • 16.776 mm(2)
    • 17.026 mm(2)
    • 19.05 mm(1)
    • 20.0 mm(3)
    • 22.85 mm(4)
    • 24.901 mm(6)
    • 25.0 mm(2)
    • 26.925 mm(1)
    • 32.0 mm(3)
    • 33.025 mm(5)
    • 40.0 mm(4)
    • 45.051 mm(1)
    • 46.475 mm(1)
    • 50.0 mm(1)
    • 50.801 mm(2)
    • 53.85 mm(1)
    • 63.0 mm(1)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.63 in(4)
    • 0.66 in(2)
    • 0.67 in(2)
    • 0.75 in(1)
    • 0.787 in(3)
    • 0.9 in(4)
    • 0.98 in(6)
    • 0.984 in(2)
    • 1.06 in(1)
    • 1.26 in(3)
    • 1.3 in(5)
    • 1.575 in(4)
    • 1.774 in(1)
    • 1.83 in(1)
    • 1.969 in(1)
    • 2.0 in(2)
    • 2.12 in(1)
    • 2.48 in(1)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (73)
    • E (17)
    • P (4)
    • S (6)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (7)
    • DOUBLE POSITIVE (5)
    • NEGATIVE-ZERO (42)
    • NEUTRAL (ZERO) (46)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.891 in(2)
    • 2.0 in(2)
    • 2.5 in(2)
    • 2.52 in(2)
    • 2.835 in(2)
    • 3.0 in(8)
    • 3.15 in(2)
    • 3.75 in(2)
    • 3.781 in(1)
    • 3.938 in(3)
    • 4.0 in(5)
    • 4.5 in(2)
    • 4.992 in(1)
    • 5.0 in(1)
    • 5.039 in(4)
    • 6.0 in(3)
    • 6.299 in(1)
    • 7.875 in(1)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 48.0 mm(2)
    • 50.801 mm(2)
    • 63.5 mm(2)
    • 64.0 mm(2)
    • 72.0 mm(2)
    • 76.2 mm(8)
    • 80.0 mm(2)
    • 95.25 mm(2)
    • 96.0 mm(1)
    • 100.0 mm(3)
    • 101.601 mm(5)
    • 114.301 mm(2)
    • 126.801 mm(1)
    • 127.0 mm(1)
    • 128.0 mm(4)
    • 152.4 mm(3)
    • 160.0 mm(1)
    • 200.0 mm(1)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (10)
    • S (34)
    frontEnd
    Clamp Style
    Clamp Style
    • N (100)
    Insert Shape
    Insert Shape
    • D-DIAMOND/RHOMBIC 55 (27)
    • K-PARALLELOGRAM 55 (12)
    • N/K-PARALLELOGRAM 55 (248)
    • V-DIAMOND/RHOMBIC 35 (150)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.116 in(2)
    • 0.121 in(1)
    • 0.185 in(1)
    • 0.244 in(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 2.95 mm(2)
    • 3.075 mm(1)
    • 4.7 mm(1)
    • 6.2 mm(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    insertGeometry
    Shape
    Shape
    • D-DIAMOND/RHOMBIC 55 (22)
    • K-PARALLELOGRAM 55 (8)
    • N/K-PARALLELOGRAM 55 (192)
    • V-DIAMOND/RHOMBIC 35 (115)
    Insert IC Size
    Insert IC Size
    • 4.75 mm(2)
    • 6.351 mm(11)
    • 9.525 mm(104)
    • 12.701 mm(22)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.187 in(2)
    • 0.25 in(11)
    • 0.375 in(104)
    • 0.5 in(22)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 11.05 mm(1)
    • 11.076 mm(10)
    • 11.601 mm(120)
    • 11.625 mm(6)
    • 15.451 mm(44)
    • 15.5 mm(22)
    • 16.6 mm(104)
    • 17.5 mm(8)
    • 22.725 mm(5)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.435 in(1)
    • 0.436 in(10)
    • 0.457 in(120)
    • 0.458 in(6)
    • 0.608 in(44)
    • 0.61 in(22)
    • 0.654 in(104)
    • 0.69 in(8)
    • 0.895 in(5)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 08 (36)
    • 1 (6)
    • 15 (96)
    • 2 (2)
    • 20 (31)
    • 25 (12)
    • 32 (2)
    • FP (63)
    • HP (2)
    Cutting Tool Material
    Cutting Tool Material
    • B H (86)
    • B L (82)
    • D P (108)
    • H T (111)
    • H W (412)
    Tolerance Class
    Tolerance Class
    • G (254)
    • M (40)
    • U (43)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (42)
    • BORING BAR HEAD (2)
    • SQUARE SHANK (56)
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(4)
    • 12.701 mm(5)
    • 15.875 mm(4)
    • 16.0 mm(3)
    • 19.05 mm(7)
    • 20.0 mm(2)
    • 25.0 mm(3)
    • 25.401 mm(5)
    • 31.701 mm(1)
    • 31.75 mm(1)
    • 32.0 mm(4)
    • 38.1 mm(3)
    • 40.0 mm(1)
    • 50.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.473 in(4)
    • 0.5 in(5)
    • 0.625 in(4)
    • 0.63 in(3)
    • 0.75 in(7)
    • 0.787 in(2)
    • 0.984 in(3)
    • 1.0 in(5)
    • 1.248 in(1)
    • 1.25 in(1)
    • 1.26 in(4)
    • 1.5 in(3)
    • 1.575 in(1)
    • 1.969 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.449 in(2)
    • 0.473 in(1)
    • 0.5 in(4)
    • 0.606 in(1)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.75 in(9)
    • 0.787 in(10)
    • 0.939 in(3)
    • 0.984 in(11)
    • 1.0 in(10)
    • 1.214 in(4)
    • 1.25 in(2)
    • 1.26 in(2)
    • 1.5 in(2)
    • 1.53 in(1)
    • 1.848 in(1)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 11.4 mm(2)
    • 12.0 mm(1)
    • 12.701 mm(4)
    • 15.4 mm(1)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.05 mm(9)
    • 20.0 mm(10)
    • 23.826 mm(3)
    • 25.0 mm(11)
    • 25.401 mm(10)
    • 30.826 mm(4)
    • 31.75 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 38.825 mm(1)
    • 46.95 mm(1)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.473 in(1)
    • 0.5 in(4)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.75 in(9)
    • 0.787 in(10)
    • 0.864 in(3)
    • 0.984 in(13)
    • 1.0 in(10)
    • 1.141 in(4)
    • 1.25 in(2)
    • 1.455 in(1)
    • 1.5 in(2)
    • 1.848 in(1)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 12.0 mm(1)
    • 12.701 mm(4)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.05 mm(9)
    • 20.0 mm(10)
    • 21.951 mm(3)
    • 25.0 mm(13)
    • 25.401 mm(10)
    • 28.951 mm(4)
    • 31.75 mm(2)
    • 36.95 mm(1)
    • 38.1 mm(2)
    • 46.95 mm(1)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?