Trochoidal Milling
Ramping: 3°
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Tool Dimensions: Flute Configuration: 5
Helix Angle: 38°
Corner Style: Corner Radius
Corner Style: Square EndDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 3580838 |
| ISO katalogové ID | UCDE188J5BRB |
| ANSI katalogové ID | UCDE188J5BRB |
| Grade | KC643M |
| Adapter Style Machine Side | Straight-Cylindrical |
| [Re] Corner Radius | 0.762 mm |
| [Re] Corner Radius | .03 in |
| [Z] Number of Flutes | 5 |
| [D1] Effective Cutting Diameter | 4.763 mm |
| [D1] Effective Cutting Diameter | .1875 in |
| [D] Adapter / Shank / Bore Diameter | 4.763 mm |
| [D] Adapter / Shank / Bore Diameter | .1875 in |
| [AP1MAX] 1st Maximum Cutting Depth | 15.875 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .625 in |
| [L] Overall Length | 57.15 mm |
| [L] Overall Length | 2.25 in |
Trochoidal MillingRamping: 3°Slotting: Square EndSide Milling/Shoulder Milling: Square EndTool Dimensions: Flute Configuration: 5Helix Angle: 38°Corner Style: Corner RadiusCorner Style: Square EndKarbidy
KC643M
Coated fine-grain grade with PVD multilayer (AlTiN). KC643M™ is a very thin and hard PVD coating particularly suited for cutting steel, cast iron, stainless steel (wet), and titanium (wet). This grade can be used for materials with hardness up to 52 HRC.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Tolerance stopkových fréz | |||
| D1 | tolerance | D | tolerance h6 + / - |
| All | +.000/- .002" | ≤1/8" | +0/-.00024" |
| +0/-.00031" | |||
| +0/-.00035" | |||
| +0/-.00043" | |||
| 0/.00051" | |||
 |  |  | |||||||||||||
| Boční frézování (A) | |||||||||||||||
| KC643M | KCPM15 | Recommended feed per tooth (IPT=inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | |||||||||||||
| A | B | Řezná rychlost | |||||||||||||
| frac. | 1/4 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | |||||||||
| Materiálová skupina | ap | ae | ap | min | max | min | max | dec. | .250 | .375 | .500 | .625 | .750 | 1.000 | |
| P | 0 | 1.5 x D | 0.5 x D | 1 x D | 490 | 660 | 490 | 660 | IPT | .0018 | .0027 | .0034 | .0039 | .0044 | .0049 |
| 1 | 1.5 x D | 0.5 x D | 1 x D | 490 | 660 | 490 | 660 | IPT | .0018 | .0027 | .0034 | .0039 | .0044 | .0049 | |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 460 | 620 | 460 | 620 | IPT | .0018 | .0027 | .0034 | .0039 | .0044 | .0049 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 390 | 520 | 390 | 520 | IPT | .0015 | .0023 | .0029 | .0034 | .0039 | .0045 | |
| 4 | 1.5 x D | 0.5 x D | 0.75 x D | 300 | 490 | 300 | 490 | IPT | .0014 | .0020 | .0026 | .0030 | .0034 | .0039 | |
| 5 | 1.5 x D | 0.5 x D | 1 x D | 200 | 330 | 200 | 330 | IPT | .0012 | .0018 | .0023 | .0027 | .0031 | .0036 | |
| 6 | 1.5 x D | 0.5 x D | 0.75 x D | 160 | 250 | 160 | 250 | IPT | .0010 | .0015 | .0019 | .0022 | .0025 | .0028 | |
| M | 1 | 1.5 x D | 0.5 x D | 1 x D | 300 | 380 | 300 | 380 | IPT | .0015 | .0023 | .0029 | .0034 | .0039 | .0045 |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 200 | 260 | 200 | 260 | IPT | .0012 | .0018 | .0023 | .0027 | .0031 | .0036 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 200 | 230 | 200 | 230 | IPT | .0010 | .0015 | .0019 | .0022 | .0025 | .0028 | |
| K | 1 | 1.5 x D | 0.5 x D | 1 x D | 390 | 490 | 390 | 490 | IPT | .0018 | .0027 | .0034 | .0039 | .0044 | .0049 |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 360 | 460 | 360 | 460 | IPT | .0015 | .0023 | .0029 | .0034 | .0039 | .0045 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 360 | 430 | 360 | 430 | IPT | .0012 | .0018 | .0023 | .0027 | .0031 | .0036 | |
| S | 1 | 1.5 x D | 0.3 x D | 0.3 x D | 160 | 300 | – | – | IPT | .0015 | .0023 | .0029 | .0034 | .0039 | .0045 |
| 2 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | 130 | – | – | IPT | .0008 | .0012 | .0015 | .0018 | .0021 | .0024 | |
| 3 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | 130 | – | – | IPT | .0008 | .0012 | .0015 | .0018 | .0021 | .0024 | |
| 4 | 1.5 x D | 0.5 x D | 1 x D | 160 | 200 | – | – | IPT | .0011 | .0017 | .0021 | .0025 | .0028 | .0033 | |
| H | 1 | 1.5 x D | 0.5 x D | 0.75 x D | 260 | 460 | 260 | 460 | IPT | .0014 | .0020 | .0026 | .0030 | .0034 | .0039 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?