Drilling
Drilling: Stacked PlatesDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 7138082 |
| ISO katalogové ID | KSEM140ST110SFP20M |
| ANSI katalogové ID | KSEM140ST110SFP20M |
| [D1] Drill Diameter M | 14 mm |
| [D1] Drill Diameter M | .5512 in |
| [D1MAX] Drill Diameter Maximum | 14.5 mm |
| [D1MAX] Drill Diameter Maximum | .5709 in |
| [L] Overall Length | 170 mm |
| [L] Overall Length | 6.692 in |
| [L1] Insert Gage Length | 110 mm |
| [L1] Insert Gage Length | 4.33 in |
| [L4] Maximum Drilling Depth | 64 mm |
| [L4] Maximum Drilling Depth | 2.519 in |
| [LS] Shank Length | 50 mm |
| [LS] Shank Length | 1.968 in |
| [D] Adapter / Shank / Bore Diameter | 20 mm |
| [D] Adapter / Shank / Bore Diameter | .7874 in |
| [SSC] Insert Seat Size | B |
DrillingDrilling: Stacked PlatesVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Speed & Feed Rates • KSEM ST-LINE • HPG(M) Geometry • Grade KCPM45 • Through Coolant • METRIC | ||||||||||
| Material | Cutting Speed | Recommended Feed Rate by Diameter (mm/r) | ||||||||
| Min | Starting Value | Max | 12,5 | 16,0 | 20,0 | 25,4 | 32,0 | 40,0 | ||
| P | 0 | 75 | 110 | 140 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 |
| 1 | 75 | 110 | 140 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 | |
| 2 | 70 | 100 | 120 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 | |
| 3 | 60 | 75 | 100 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 | |
| 4 | 55 | 75 | 95 | 0,12 – 0,31 | 0,14 – 0,34 | 0,16 – 0,40 | 0,20 – 0,51 | 0,23 – 0,58 | 0,26 – 0,66 | |
| 5 | 50 | 65 | 80 | 0,09 – 0,17 | 0,11 – 0,20 | 0,12 – 0,23 | 0,15 – 0,28 | 0,17 – 0,32 | 0,20 – 0,36 | |
| 6 | 50 | 65 | 80 | 0,09 – 0,17 | 0,11 – 0,20 | 0,12 – 0,23 | 0,15 – 0,28 | 0,17 – 0,32 | 0,20 – 0,36 | |
| M | 1 | 30 | 60 | 90 | 0,09 – 0,14 | 0,11 – 0,17 | 0,13 – 0,20 | 0,16 –0,25 | 0,18 – 0,28 | 0,21 – 0,31 |
| 2 | 30 | 50 | 90 | 0,09 – 0,14 | 0,11 – 0,17 | 0,13 – 0,20 | 0,16 –0,25 | 0,18 – 0,28 | 0,21 – 0,31 | |
| 3 | 20 | 40 | 60 | 0,09 – 0,14 | 0,11 – 0,17 | 0,13 – 0,20 | 0,16 –0,25 | 0,18 – 0,28 | 0,21 – 0,31 | |
| Note: For MQL applications, reduce cutting speed by 30–40% | ||||||||||
| Speed & Feed Rates • KSEM ST-LINE • HPG(M) Geometry • Grade KCPM45 • Through Coolant • METRIC | ||||||||||
| Cutting Speed | Recommended Feed Rate by Diameter (mm/r) | |||||||||
| Material | Min | Starting Value | Max | 12,5 | 16,0 | 20,0 | 25,4 | 32,0 | 40,0 | |
| P | 0 | 75 | 110 | 140 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 |
| 1 | 75 | 110 | 140 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 | |
| 2 | 70 | 100 | 120 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 | |
| 3 | 60 | 75 | 100 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 | |
| 4 | 55 | 75 | 95 | 0,12 – 0,31 | 0,14 – 0,34 | 0,16 – 0,40 | 0,20 – 0,51 | 0,23 – 0,58 | 0,26 – 0,66 | |
| 5 | 50 | 65 | 80 | 0,09 – 0,17 | 0,11 – 0,20 | 0,12 – 0,23 | 0,15 – 0,28 | 0,17 – 0,32 | 0,20 – 0,36 | |
| 6 | 50 | 65 | 80 | 0,09 – 0,17 | 0,11 – 0,20 | 0,12 – 0,23 | 0,15 – 0,28 | 0,17 – 0,32 | 0,20 – 0,36 | |
| M | 1 | 30 | 60 | 90 | 0,09 – 0,14 | 0,11 – 0,17 | 0,13 – 0,20 | 0,16 –0,25 | 0,18 – 0,28 | 0,21 – 0,31 |
| 2 | 30 | 50 | 90 | 0,09 – 0,14 | 0,11 – 0,17 | 0,13 – 0,20 | 0,16 –0,25 | 0,18 – 0,28 | 0,21 – 0,31 | |
| 3 | 20 | 40 | 60 | 0,09 – 0,14 | 0,11 – 0,17 | 0,13 – 0,20 | 0,16 –0,25 | 0,18 – 0,28 | 0,21 – 0,31 | |
| Note: For MQL applications, reduce cutting speed by 30–40% | ||||||||||
| Speed & Feed Rates • KSEM ST-LINE • HPG(M) Geometry • Grade KCPM45 • Through Coolant • INCH | ||||||||||
| Cutting Speed | Recommended Feed Rate by Diameter (IPR) | |||||||||
| Material | Min | Starting Value | Max | 0.462 | 0.630 | 0.787 | 1.000 | 1.260 | 1.575 | |
| P | 0 | 250 | 360 | 460 | .006 – .012 | .007 – .014 | .007 – .016 | .010 – .021 | .011 – .024 | .013 – .027 |
| 1 | 250 | 360 | 460 | .006 – .012 | .007 – .014 | .007 – .016 | .010 – .021 | .011 – .024 | .013 – .027 | |
| 2 | 230 | 330 | 390 | .006 – .012 | .007 – .014 | .007 – .016 | .010 – .021 | .011 – .024 | .013 – .027 | |
| 3 | 200 | 250 | 330 | .006 – .012 | .007 – .014 | .007 – .016 | .010 – .021 | .011 – .024 | .013 – .027 | |
| 4 | 180 | 250 | 310 | .005 – .012 | .006 – .013 | .006 – .016 | .008 – .020 | .009 – .023 | .010 – .026 | |
| 5 | 160 | 210 | 260 | .004 – .007 | .004 – .008 | .005 – .009 | .006 – .011 | .007 – .013 | .008 – .014 | |
| 6 | 160 | 210 | 260 | .004 – .007 | .004 – .008 | .005 – .009 | .006 – .011 | .007 – .013 | .008 – .014 | |
| M | 1 | 100 | 200 | 300 | .004 – .006 | .004 – .007 | .005 – .008 | .006 – .010 | .007 – .011 | .008 – .012 |
| 2 | 100 | 160 | 300 | .004 – .006 | .004 – .007 | .005 – .008 | .006 – .010 | .007 – .011 | .008 – .012 | |
| 3 | 70 | 130 | 200 | .004 – .006 | .004 – .007 | .005 – .008 | .006 – .010 | .007 – .011 | .008 – .012 | |
| Note: For MQL applications, reduce cutting speed by 30–40% | ||||||||||
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
