Helical Milling
Plunge Milling
Ramping: Blank
Slotting: Ball Nose
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Shank - Screw-On
Milling - Through Coolant
PocketingDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 3652852 |
| ISO katalogové ID | KF063WP0302M08100 |
| ANSI katalogové ID | KF063WP0302M08100 |
| [D1MAX] Maximum Cutting Diameter | 15.88 mm |
| [D1MAX] Maximum Cutting Diameter | 0.625 in |
| [D1] Effective Cutting Diameter | 10.1 mm |
| [D1] Effective Cutting Diameter | 0.398 in |
| [D] Adapter / Shank / Bore Diameter | 13 mm |
| [D] Adapter / Shank / Bore Diameter | 0.512 in |
| [WF] Width of Flat | 10 mm |
| [WF] Width of Flat | 0.386 in |
| [G3X] Connection Thread Size External | M8 |
| [L2] Head Length | 25.4 mm |
| [L2] Head Length | 1 in |
| [AP1MAX] 1st Maximum Cutting Depth | 0.84 mm |
| [AP1MAX] 1st Maximum Cutting Depth | 0.033 in |
| Number of Inserts | 2 |
| Weight Pounds | 0.06 |
| Maximum Ramping Angle | 8.5 |
| Max RPM | 25055 |
| Gage Insert | WP..0302. |
Helical MillingPlunge MillingRamping: BlankSlotting: Ball NoseSide Milling/Shoulder Milling: Ball Nose3D ProfilingShank - Screw-OnMilling - Through CoolantPocketingVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .LD.. | .027 | .070 | .121 | .019 | .049 | .081 | .017 | .042 | .068 | .016 | .040 | .063 | .015 | .039 | .062 | .LD.. |
| .LN.. | .027 | .070 | .121 | .019 | .049 | .081 | .017 | .042 | .068 | .016 | .040 | .063 | .015 | .039 | .062 | .LN.. |
| Lehké obrábění | Všeobecné použití | Těžké obrábění |
| Materiálová skupina | KC510M | KC522M | KC725M | KCPM20 | KCPK30 | |||||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 2170 | 1910 | 1760 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1340 | 1210 | 1090 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1210 | 1090 | 1000 | 1000 | 900 | 820 | |
| 4 | 960 | 780 | 660 | 890 | 730 | 590 | 710 | 590 | 470 | 910 | 840 | 760 | 740 | 690 | 620 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1090 | 980 | 900 | 1020 | 910 | 830 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 760 | 660 | 570 | 620 | 540 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 880 | 790 | 680 | 820 | 720 | 620 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 800 | 700 | 620 | 730 | 640 | 550 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 640 | 570 | 490 | 570 | 520 | 460 | |
| K | 1 | 1150 | 1040 | 940 | 900 | 820 | 720 | – | – | – | 1420 | 1280 | 1150 | 1160 | 1050 | 940 |
| 2 | 910 | 820 | 760 | 710 | 640 | 590 | – | – | – | 1130 | 1010 | 920 | 920 | 830 | 760 | |
| 3 | 770 | 680 | 620 | 590 | 530 | 480 | – | – | – | 950 | 840 | 780 | 770 | 690 | 640 | |
| N | 1 | 2520 | 2240 | 2060 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | – | – | – | |
| H | 1 | 600 | 500 | 370 | 470 | 360 | 280 | – | – | – | 550 | 460 | 370 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Materiálová skupina | Lehké obrábění | Všeobecné použití | Těžké obrábění | |||
| (Lehká geometrie) | (Silná geometrie) | |||||
| Odolnost proti opotřebení |  | Houževnatost | ||||
| Geometrie | Sorta | Geometrie | Sorta | Geometrie | Sorta | |
| P1–P2 | .LD.. | KC522M | .LD.. | KCPK30 | .LD.. | KCPK30 |
| P3–P4 | .LD.. | KC522M | .LD.. | KCPK30 | .LD.. | KCPK30 |
| P5–P6 | .LD.. | KCPK30 | .LD.. | KCPM20 | – | – |
| M1–M2 | .LD.. | KC522M | .LD.. | KC725M | – | – |
| M3 | .LD.. | KC522M | .LD.. | KC725M | – | – |
| K1–K2 | .LN.. | KC510M | .LD.. | KCPK30 | – | – |
| K3 | .LN.. | KC510M | .LD.. | KCPK30 | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .LD.. | KC522M | .LD.. | KC725M | – | – |
| S3 | .LD.. | KC725M | .LD.. | KC725M | – | – |
| S4 | .LD.. | KC522M | .LD.. | KC725M | – | – |
| H1 | .LN.. | KC510M | .LN.. | KC510M | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?