Country

言語

測定の単位

提案製品

HARVI™ III Solid Carbide End Mill for 3D Profiling with Highest Productivity

HARVI™ III • Ball Nose • 6 Flutes • Necked • Plain Shank • Inch

Name: HARVI™ III • Ball Nose • 6 Flutes • Necked • Plain Shank • Inch
SKU: 100024211
Rating: 0 (0 reviews)

HARVI™ III Solid Carbide End Mill for 3D Profiling with Highest Productivity

特徴と利点

Versatile solid carbide end mill for steels, stainless steel, and high-temperature alloys.

HARVI™ III solid carbide end mills cover a variety of operations.

HARVI™ III solid carbide end mills feature unequal flute spacing for chatter-free machining at highest feed rates.

Eccentric relief grind for higher edge stability and higher feed rates.

Centre cutting for plunging and ramping operations.

使用法と用途

Ball Nose Trochoidal Milling
側面加工／ショルダー加工：ボールノーズ
3Dプロファイル加工
工具寸法：フルートの構造： 6
ねじれ角： 38°

End Mill Tolerances
D1	tolerance	D	tolerance h6 + / -
All	+.000/- .002"	≤1/8"	+0/-.00024"
		1/8 1/4"	+0/-.00031"
		1/4 3/8"	+0/-.00035"
		3/8 23/32"	+0/-.00043"
		23/32 1-3/16"	0/.00051"

HARVI III • UJBE • Ball Nose • Unequal Flute Spacing • Roughing

Material Group				KCSM15A		Recommended feed per tooth (IPT = inch/th) for side milling.
				Cutting Speed vc SFM			D1 Diameter
				Cutting Speed vc SFM		frac.	1/8	3/16	1/4	5/16	3/8	7/16	1/2	5/8	3/4	1	1 1/4
		ap	ae	min	max	dec.	.1250	.1875	.2500	.3125	.3750	.4375	.5000	.6250	.7500	1.0000	1.2500
P	0	Ap max	0.4 x D	490	660	IPT	0.0009	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
	1	Ap max	0.4 x D	490	660	IPT	0.0009	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
	2	Ap max	0.4 x D	460	620	IPT	0.0009	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
	3	Ap max	0.4 x D	390	520	IPT	0.0007	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
	4	Ap max	0.4 x D	300	490	IPT	0.0007	0.0010	0.0014	0.0017	0.0020	0.0023	0.0026	0.0030	0.0034	0.0039	0.0040
	5	Ap max	0.4 x D	200	330	IPT	0.0006	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0031	0.0036	0.0039
	6	Ap max	0.4 x D	160	250	IPT	0.0005	0.0008	0.0010	0.0013	0.0015	0.0017	0.0019	0.0022	0.0025	0.0028	0.0029
M	1	Ap max	0.4 x D	300	380	IPT	0.0007	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
	2	Ap max	0.4 x D	200	260	IPT	0.0006	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0031	0.0036	0.0039
	3	Ap max	0.4 x D	200	230	IPT	0.0005	0.0008	0.0010	0.0013	0.0015	0.0017	0.0019	0.0022	0.0025	0.0028	0.0029
S	1	Ap max	0.4 x D	160	300	IPT	0.0007	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
	2	Ap max	0.4 x D	80	160	IPT	0.0004	0.0006	0.0008	0.0010	0.0012	0.0014	0.0015	0.0018	0.0021	0.0024	0.0026
	3	Ap max	0.4 x D	80	130	IPT	0.0004	0.0006	0.0008	0.0010	0.0012	0.0014	0.0015	0.0018	0.0021	0.0024	0.0026
	4	Ap max	0.4 x D	160	200	IPT	0.0005	0.0008	0.0011	0.0014	0.0017	0.0019	0.0021	0.0025	0.0028	0.0033	0.0036
H	1	Ap max	0.4 x D	260	460	IPT	0.0007	0.0010	0.0014	0.0017	0.0020	0.0023	0.0026	0.0030	0.0034	0.0039	0.0040

HARVI III • UJBE • Ball Nose • Unequal Flute Spacing • Roughing

Material Group				KCSM15A		Recommended feed per tooth (IPT = inch/th) for side milling.
				Cutting Speed vc SFM			D1 Diameter
				Cutting Speed vc SFM		frac.	1/8	3/16	1/4	5/16	3/8	7/16	1/2	5/8	3/4	1	1 1/4
		ap	ae	min	max	dec.	.1250	.1875	.2500	.3125	.3750	.4375	.5000	.6250	.7500	1.0000	1.2500
P	0	Ap max	0.06 x D	940	1250	IPT	0.0011	0.0016	0.0022	0.0028	0.0033	0.0037	0.0041	0.0047	0.0053	0.0059	0.0059
	1	Ap max	0.06 x D	940	1250	IPT	0.0011	0.0016	0.0022	0.0028	0.0033	0.0037	0.0041	0.0047	0.0053	0.0059	0.0059
	2	Ap max	0.06 x D	870	1180	IPT	0.0011	0.0016	0.0022	0.0028	0.0033	0.0037	0.0041	0.0047	0.0053	0.0059	0.0059
	3	Ap max	0.06 x D	750	1000	IPT	0.0009	0.0013	0.0018	0.0023	0.0027	0.0031	0.0035	0.0041	0.0046	0.0054	0.0058
	4	Ap max	0.06 x D	560	940	IPT	0.0008	0.0012	0.0017	0.0021	0.0025	0.0028	0.0031	0.0036	0.0040	0.0046	0.0048
	5	Ap max	0.06 x D	370	620	IPT	0.0007	0.0011	0.0015	0.0019	0.0022	0.0025	0.0028	0.0033	0.0037	0.0043	0.0047
	6	Ap max	0.06 x D	310	470	IPT	0.0006	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0030	0.0034	0.0035
M	1	Ap max	0.06 x D	560	720	IPT	0.0009	0.0013	0.0018	0.0023	0.0027	0.0031	0.0035	0.0041	0.0046	0.0054	0.0058
	2	Ap max	0.06 x D	370	500	IPT	0.0007	0.0011	0.0015	0.0019	0.0022	0.0025	0.0028	0.0033	0.0037	0.0043	0.0047
	3	Ap max	0.06 x D	370	440	IPT	0.0006	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0030	0.0034	0.0035
S	1	Ap max	0.06 x D	310	560	IPT	0.0009	0.0013	0.0018	0.0023	0.0027	0.0031	0.0035	0.0041	0.0046	0.0054	0.0058
	2	Ap max	0.06 x D	160	310	IPT	0.0005	0.0007	0.0010	0.0012	0.0015	0.0017	0.0018	0.0022	0.0025	0.0029	0.0032
	3	Ap max	0.06 x D	160	250	IPT	0.0005	0.0007	0.0010	0.0012	0.0015	0.0017	0.0018	0.0022	0.0025	0.0029	0.0032
	4	Ap max	0.06 x D	310	370	IPT	0.0006	0.0009	0.0013	0.0017	0.0020	0.0023	0.0026	0.0030	0.0034	0.0040	0.0043
H	1	Ap max	0.06 x D	500	870	IPT	0.0008	0.0012	0.0017	0.0021	0.0025	0.0028	0.0031	0.0036	0.0040	0.0046	0.0048

ようこそ

設定をご確認ください

設定の更新

提案製品

Product Family suggestions

営業チームにお問い合わせください

営業チームにお問い合わせください

ソリューション編集

ソリューション追加

HARVI™ III • Ball Nose • 6 Flutes • Necked • Plain Shank • Inch

HARVI™ III Solid Carbide End Mill for 3D Profiling with Highest Productivity

特徴と利点

使用法と用途

HARVI III • UJBE • Ball Nose • Unequal Flute Spacing • Roughing

HARVI III • UJBE • Ball Nose • Unequal Flute Spacing • Roughing

提案製品

Product Family suggestions

営業チームにお問い合わせください

通知

営業チームにお問い合わせください

Sending to {{cadTool}} in progress...

HARVI™ III • Ball Nose • 6 Flutes • Necked • Plain Shank • Inch

HARVI™ III Solid Carbide End Mill for 3D Profiling with Highest Productivity

特徴と利点

使用法と用途

HARVI III • UJBE • Ball Nose • Unequal Flute Spacing • Roughing

HARVI III • UJBE • Ball Nose • Unequal Flute Spacing • Roughing

The following files are available