A2™ • 片側突っ切り
フィルタ
フィルタ
フィルタ表示
メートルインチ
Workpiece Material
Workpiece Material
- P Steel (175)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(175)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(175)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(175)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(175)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(175)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(175)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(175)
- M Stainless Steel (176)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(176)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(176)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(176)
- K Cast Iron (167)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(167)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(167)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(167)
- N Non-Ferrous Materials (167)
- N1Wrought Aluminum (167)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(166)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (167)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (166)
- N6Carbon, Graphite Composites, CFRP (166)
- S High-Temp Alloys (167)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(167)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(167)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(167)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(167)
Applications
Applications
Cut-Off (150)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (151)
- Lightly Interrupted Cut (167)
- Smooth Cut (176)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (35)
to
Connection Style
Connection Style
- Cutoff Support Blade A1-A3 (35)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (213)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.953 in(2)
- 3.386 in(7)
- 3.396 in(2)
- 3.551 in(2)
- 3.553 in(1)
- 3.946 in(1)
- 4.331 in(12)
- 4.339 in(2)
- 4.341 in(11)
- 4.343 in(1)
- 4.931 in(4)
- 5.315 in(3)
- 5.913 in(3)
- 5.915 in(4)
- 5.917 in(2)
- 10.242 in(1)
to
Over All Length [L]
Over All Length [L]
- 75.0 mm(2)
- 86.0 mm(7)
- 86.25 mm(2)
- 90.2 mm(2)
- 90.25 mm(1)
- 100.2 mm(1)
- 110.0 mm(12)
- 110.2 mm(2)
- 110.25 mm(11)
- 110.301 mm(1)
- 125.25 mm(4)
- 135.0 mm(3)
- 150.201 mm(3)
- 150.25 mm(4)
- 150.3 mm(2)
- 260.151 mm(1)
to
Corner Radius
Corner Radius
- 0.004 in(23)
- 0.006 in(14)
- 0.008 in(89)
- 0.012 in(60)
- 0.016 in(15)
to
Corner Radius
Corner Radius
- 0.1 mm(23)
- 0.151 mm(14)
- 0.2 mm(89)
- 0.301 mm(60)
- 0.4 mm(15)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(178)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(178)
to
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC5025 (84)
- KCU25 (91)
- KCU25B (63)
- KMF (31)
- KT315 (37)
Hand Of Tool
Hand Of Tool
- L (7)
- N (21)
- R (7)
Wiper Insert
Wiper Insert
- N (213)
F Dimension
F Dimension
- 1.25 mm(2)
to
F Dimension
F Dimension
- 0.049 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 1.181 in(3)
- 1.339 in(1)
- 1.496 in(1)
- 1.655 in(9)
- 2.598 in(4)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 30.0 mm(3)
- 34.0 mm(1)
- 38.0 mm(1)
- 42.0 mm(9)
- 66.0 mm(4)
to
Cutting Direction
Cutting Direction
- E (35)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (13)
- POSITIVE-ZERO (20)
frontEnd
Clamp Style
Clamp Style
- Y (35)
Cutting Width
Cutting Width
- 0.055 in(5)
- 0.061 in(6)
- 0.063 in(28)
- 0.088 in(52)
- 0.119 in(53)
- 0.12 in(15)
- 0.122 in(14)
- 0.157 in(23)
- 0.159 in(15)
- 0.197 in(15)
- 0.237 in(10)
- 0.315 in(7)
to
Cutting Width
Cutting Width
- 1.401 mm(5)
- 1.55 mm(6)
- 1.6 mm(28)
- 2.2 mm(52)
- 3.0 mm(53)
- 3.051 mm(15)
- 3.1 mm(14)
- 4.0 mm(23)
- 4.05 mm(15)
- 5.0 mm(15)
- 6.0 mm(10)
- 8.0 mm(7)
to
Insert Shape
Insert Shape
- PRISMATIC (213)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.591 in(2)
- 0.63 in(1)
- 0.669 in(1)
- 0.748 in(1)
- 0.787 in(1)
- 0.828 in(9)
- 0.984 in(3)
- 1.299 in(4)
- 1.575 in(6)
- 1.969 in(3)
- 2.362 in(3)
- 4.724 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 15.0 mm(2)
- 16.0 mm(1)
- 17.0 mm(1)
- 19.0 mm(1)
- 20.0 mm(1)
- 21.0 mm(9)
- 25.0 mm(3)
- 33.0 mm(4)
- 40.0 mm(6)
- 50.0 mm(3)
- 60.0 mm(3)
- 120.0 mm(1)
to
insertGeometry
Shape
Shape
- PRISMATIC (178)
Insert Seat Size
Insert Seat Size
- 1 (28)
- 1B (3)
- 2 (43)
- 3 (49)
- 4 (28)
- 5 (13)
- 6 (8)
- 8 (6)
Cutting Tool Material
Cutting Tool Material
- H T (37)
- H W (204)
backEnd
Connection Type
Connection Type
- CUTOFF BLADE (35)
Shank Height
Shank Height
- 0.748 in(2)
- 1.024 in(16)
- 1.26 in(16)
- 2.066 in(1)
to
Shank Height
Shank Height
- 19.0 mm(2)
- 26.0 mm(16)
- 32.0 mm(16)
- 52.475 mm(1)
to
Shank Width
Shank Width
- 0.07 in(3)
- 0.072 in(5)
- 0.095 in(7)
- 0.134 in(2)
- 0.174 in(2)
- 0.213 in(2)
- 0.276 in(1)
- 0.313 in(13)
to
Shank Width
Shank Width
- 1.776 mm(3)
- 1.8 mm(5)
- 2.401 mm(7)
- 3.401 mm(2)
- 4.4 mm(2)
- 5.4 mm(2)
- 7.0 mm(1)
- 7.95 mm(13)
to
No filters matching ""
