ようこそ
設定をご確認ください
設定の更新

提案製品

Product Family suggestions

ケナメタルにお任せ

カスタマーサポート

グローバルカスタマーサポートの連絡先を探します

クイックオーダー
品目 がカートに正常に追加されました
カートの表示

Modular Blades

フィルタを選択
フィルタ
フィルタ
    フィルタ表示
    メートル
    インチ
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (111)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(111)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(111)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(111)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(111)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(111)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(111)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(111)
    • M Stainless Steel (111)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(111)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(111)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(111)
    • K Cast Iron (111)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(111)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(111)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(111)
    • N Non-Ferrous Materials (111)
      • N1
        Wrought Aluminum (111)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(111)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(59)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (111)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (111)
      • N6
        Carbon, Graphite Composites, CFRP (111)
      • N7
        MMC's (59)
    • S High-Temp Alloys (111)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(111)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(111)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(111)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(111)
    • H Hardened Materials (111)
      • H1
        Hardened Materials 44-48 HRC(111)
      • H2
        Hardened Materials 48-55 HRC(111)
      • H3
        Hardened Materials 56-60 HRC(71)
      • H4
        Hardened Materials >60 HRC(71)
    第1選択を選択
    • IN (1)
    • US (1)
    Applications
    Applications
    • Face GroovingFace Grooving (111)
    • Multiple Direction CuttingMultiple Direction Cutting (111)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (111)
    • Lightly Interrupted Cut (111)
    • Smooth Cut (111)
    • Varying Depth of Cut (111)
    Over All Length [L]
    Over All Length [L]
    • 2.077 in(31)
    • 2.156 in(43)
    • 2.269 in(21)
    • 2.352 in(14)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 52.75 mm(31)
    • 54.75 mm(43)
    • 57.625 mm(21)
    • 59.75 mm(14)
    Over All Length [L] MintoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(74)
    • 0.016 in(85)
    • 0.031 in(55)
    • 0.034 in(18)
    • 0.039 in(26)
    • 0.041 in(20)
    • 0.047 in(21)
    • 0.048 in(5)
    • 0.06 in(30)
    • 0.063 in(26)
    • 0.079 in(19)
    • 0.08 in(18)
    • 0.094 in(18)
    • 0.098 in(15)
    • 0.099 in(15)
    • 0.119 in(12)
    • 0.12 in(12)
    • 0.125 in(12)
    • 0.156 in(5)
    • 0.157 in(5)
    • 0.158 in(5)
    • 0.187 in(4)
    • 0.188 in(4)
    • 0.197 in(4)
    • 0.198 in(4)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(74)
    • 0.4 mm(85)
    • 0.8 mm(55)
    • 0.851 mm(18)
    • 1.0 mm(26)
    • 1.05 mm(20)
    • 1.201 mm(21)
    • 1.225 mm(5)
    • 1.5 mm(30)
    • 1.526 mm(26)
    • 1.6 mm(26)
    • 2.0 mm(19)
    • 2.025 mm(18)
    • 2.375 mm(18)
    • 2.5 mm(15)
    • 2.526 mm(15)
    • 3.0 mm(12)
    • 3.026 mm(12)
    • 3.176 mm(12)
    • 3.975 mm(5)
    • 4.0 mm(5)
    • 4.025 mm(5)
    • 4.75 mm(4)
    • 4.775 mm(4)
    • 5.0 mm(4)
    • 5.025 mm(4)
    Corner Radius MintoCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K1025 (35)
    • K313 (100)
    • KB1630 (71)
    • KB5625 (71)
    • KBH20 (71)
    • KC5010 (100)
    • KC5025 (100)
    • KC9110 (100)
    • KC9125 (100)
    • KCK20 (80)
    • KCP10 (100)
    • KCP25 (100)
    • KCU10 (111)
    • KCU10B (111)
    • KCU25 (111)
    • KCU25B (111)
    • KD1405 (59)
    • KMS (41)
    • KT315 (91)
    • KU10 (100)
    • KU30T (71)
    • KY3500 (80)
    • KYS30 (32)
    • SP88F8 (12)
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 16.0 mm(2)
    • 20.0 mm(4)
    • 25.0 mm(5)
    • 36.0 mm(5)
    • 42.0 mm(5)
    • 48.0 mm(3)
    • 50.0 mm(3)
    • 52.0 mm(3)
    • 58.0 mm(4)
    • 60.0 mm(4)
    • 64.0 mm(4)
    • 68.0 mm(4)
    • 70.0 mm(4)
    • 80.0 mm(7)
    • 90.0 mm(6)
    • 92.0 mm(3)
    • 100.0 mm(4)
    • 120.0 mm(8)
    • 130.0 mm(4)
    • 132.0 mm(4)
    • 184.0 mm(3)
    • 200.0 mm(8)
    • 250.0 mm(6)
    • 290.0 mm(8)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.63 in(2)
    • 0.787 in(4)
    • 0.984 in(5)
    • 1.417 in(5)
    • 1.655 in(5)
    • 1.891 in(3)
    • 1.969 in(3)
    • 2.047 in(3)
    • 2.283 in(4)
    • 2.362 in(4)
    • 2.52 in(4)
    • 2.677 in(4)
    • 2.757 in(4)
    • 3.15 in(7)
    • 3.543 in(6)
    • 3.622 in(3)
    • 3.938 in(4)
    • 4.724 in(8)
    • 5.118 in(4)
    • 5.197 in(4)
    • 7.244 in(3)
    • 7.875 in(8)
    • 9.843 in(6)
    • 11.417 in(8)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.787 in(2)
    • 0.984 in(4)
    • 1.379 in(1)
    • 1.417 in(4)
    • 1.811 in(1)
    • 1.891 in(4)
    • 2.126 in(2)
    • 2.283 in(3)
    • 2.52 in(3)
    • 2.835 in(3)
    • 2.914 in(3)
    • 3.307 in(4)
    • 3.701 in(4)
    • 3.938 in(8)
    • 4.409 in(4)
    • 4.882 in(3)
    • 5.354 in(4)
    • 5.906 in(3)
    • 6.299 in(4)
    • 7.875 in(2)
    • 8.346 in(4)
    • 10.0 in(4)
    • 11.811 in(12)
    • 39.331 in(11)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 20.0 mm(2)
    • 25.0 mm(4)
    • 35.0 mm(1)
    • 36.0 mm(4)
    • 46.0 mm(1)
    • 48.0 mm(4)
    • 54.0 mm(2)
    • 58.0 mm(3)
    • 64.0 mm(3)
    • 72.0 mm(3)
    • 74.0 mm(3)
    • 84.0 mm(4)
    • 94.0 mm(4)
    • 100.0 mm(8)
    • 112.0 mm(4)
    • 124.0 mm(3)
    • 136.0 mm(4)
    • 150.0 mm(3)
    • 160.0 mm(4)
    • 200.0 mm(2)
    • 212.0 mm(4)
    • 254.0 mm(4)
    • 300.0 mm(12)
    • 999.0 mm(11)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    frontEnd
    Cutting Width
    Cutting Width
    • 0.079 in(26)
    • 0.084 in(26)
    • 0.119 in(30)
    • 0.12 in(26)
    • 0.122 in(26)
    • 0.123 in(30)
    • 0.125 in(26)
    • 0.13 in(26)
    • 0.157 in(19)
    • 0.161 in(18)
    • 0.162 in(19)
    • 0.187 in(18)
    • 0.193 in(18)
    • 0.197 in(15)
    • 0.199 in(15)
    • 0.201 in(15)
    • 0.202 in(15)
    • 0.237 in(12)
    • 0.239 in(12)
    • 0.241 in(12)
    • 0.25 in(12)
    • 0.256 in(12)
    • 0.312 in(5)
    • 0.313 in(5)
    • 0.315 in(5)
    • 0.317 in(5)
    • 0.319 in(5)
    • 0.32 in(5)
    • 0.375 in(4)
    • 0.382 in(4)
    • 0.394 in(4)
    • 0.396 in(4)
    • 0.399 in(4)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 2.0 mm(26)
    • 2.125 mm(26)
    • 3.0 mm(30)
    • 3.051 mm(26)
    • 3.1 mm(26)
    • 3.125 mm(30)
    • 3.176 mm(26)
    • 3.301 mm(26)
    • 4.0 mm(19)
    • 4.101 mm(18)
    • 4.125 mm(19)
    • 4.75 mm(18)
    • 4.9 mm(18)
    • 5.0 mm(15)
    • 5.051 mm(15)
    • 5.101 mm(15)
    • 5.125 mm(15)
    • 6.0 mm(12)
    • 6.051 mm(12)
    • 6.125 mm(12)
    • 6.351 mm(12)
    • 6.5 mm(12)
    • 7.926 mm(5)
    • 7.95 mm(5)
    • 8.0 mm(5)
    • 8.05 mm(5)
    • 8.1 mm(5)
    • 8.125 mm(5)
    • 9.525 mm(4)
    • 9.701 mm(4)
    • 10.0 mm(4)
    • 10.05 mm(4)
    • 10.125 mm(4)
    Cutting Width MintoCutting Width Max
    Cartridge Size
    Cartridge Size
    • 50 (90)
    • 65 (21)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.473 in(26)
    • 0.551 in(49)
    • 0.748 in(15)
    • 0.946 in(21)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 12.0 mm(26)
    • 14.0 mm(49)
    • 19.0 mm(15)
    • 24.0 mm(21)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (71)
    • B L (71)
    • C N (80)
    • D P (59)
    • H T (91)
    • H W (111)
    No filters matching ""
    A4M-S-Bアウトボードスイープ（インテグラル小径端面溝入れ工具）メトリック
    (67)

    A4M-S-Bアウトボードスイープ（インテグラル小径端面溝入れ工具）メトリック

    A4M-Aインボードスイープ
    (44)

    A4M-Aインボードスイープ

    マイソリューションページにを追加しようとしています. 続行しますか?
    Select the destination where you want to move to.
    新規 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    有効な名前を入力してください
    product-image
    Please adjust the following properties from

    ISO製品型番

    ANSI製品型番

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    ダッシュボード情報を表示するには、ログインする必要があります
    Session expired due to inactivity, please login again
    カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
    アイテムがカートに正常に追加されました
    カートを表示

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO製品型番材種  

    You are about to leave the Solution building process.

    Are you sure you want to leave?