Name: KNS® • Arbor Mount • Metric
SKU: 5614839
Rating: 0 (0 reviews)

インサート選択

インサート選択の手引き

KNS® Slotting Cutter • Insert Selection Guide
Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)				(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1-P2	.S..GP	KCU25	.S..GP	KCU25	.S..GP	KCPM40
P3-P4	.S..GP	KCU25	.S..GP	KCU25	.S..GP	KCPM40
P5-P6	.S..GP	KCU25	.S..GP	KCU25	.S..GP	KCPM40
M1-M2	.S..GP	KCU25	.S..GP	KCPM40	.S..GP	KCPM40
M3	.S..GP	KCU25	.S..GP	KCPM40	.S..GP	KCPM40
K1-K2	.S..GP	KCU25	.S..GP	KCPK30	.S..GP	KCPK30
K3	.S..GP	KCU25	.S..GP	KCPK30	.S..GP	KCPK30
N1-N2	–	–	.S..GP	KCU25	–	–
N3	–	–	.S..GP	KCU25	–	–
S1-S2	.S..GP	KCU25	.S..GP	KCU25	.S..GP	KCU25
S3	.S..GP	KCU25	.S..GP	KCU25	.S..GP	KCU25
S4	.S..GP	KCU25	.S..GP	KCU25	.S..GP	KCU25
H1	–	–	–	–	–	–

続きを読むView Less

送り量

KNS® Slotting Cutter • Recommended Starting Feeds [mm/th]
Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.
	5%			10%			20%			30–100%
	L	M	H	L	M	H	L	M	H	L	M	H
.S..GP	0,13	0,28	0,35	0,09	0,20	0,32	0,07	0,15	0,32	0,06	0,12	0,30
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

KNS® Slotting Cutter • Recommended Starting Feeds [IPT]
Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.
	5%			10%			20%			30–100%
	L	M	H	L	M	H	L	M	H	L	M	H
.S..GP	0.005	0.011	0.027	0.004	0.008	0.020	0.003	0.006	0.015	0.002	0.005	0.012
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

続きを読むView Less

速度

KNS® Slotting Cutter • Recommended Starting Speed [m/min]
Kalite		KCU25			KCPK30			KMF
Talaş kalınlığı hex mm		Min.		Maks.	Min.		Maks.	Min.		Maks.
Malzeme grubu		Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.
P	1	260	230	215	455	395	370	295	260	245
	2	220	190	160	280	255	230	250	215	180
	3	200	170	140	255	230	205	230	195	160
	4	180	150	120	225	185	160	205	170	135
	5	150	135	120	190	170	150	170	155	135
	6	130	100	80	160	135	110	150	115	90
M	1	210	170	135	205	185	155	195	170	155
	2	170	150	110	185	160	140	175	150	125
	3	130	120	85	145	130	115	130	115	90
K	1	270	220	170	295	265	240	–	–	–
	2	230	190	160	235	210	190	–	–	–
	3	210	160	140	195	175	160	–	–	–
N	1	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–
S	1	30	25	20	–	–	–	40	35	30
	2	30	25	20	–	–	–	40	35	30
	3	40	30	20	–	–	–	50	40	30
	4	55	40	25	50	45	35	55	50	35
H	1	–	–	–	–	–	–	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

KNS® Slotting Cutter • Recommended Starting Speed [SFM]
Kalite		KCPK30			KCPK30			KMF
Chip Thickness hex Inch		Min.		Maks.	Min.		Maks.	Min.		Maks.
Malzeme grubu		Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.
P	1	855	755	705	1495	1295	1215	970	855	805
	2	720	625	525	920	835	755	820	705	590
	3	655	560	460	835	755	675	755	640	525
	4	590	490	395	740	605	525	675	560	445
	5	490	445	395	625	560	490	560	510	445
	6	425	330	260	525	445	360	490	375	295
M	1	690	560	445	675	605	510	640	560	510
	2	560	490	360	605	525	460	575	490	410
	3	425	395	280	475	425	375	425	375	295
K	1	885	720	560	970	870	785	–	–	–
	2	755	625	525	770	690	625	–	–	–
	3	690	525	460	640	575	525	–	–	–
N	1	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–
S	1	100	80	65	–	–	–	130	115	100
	2	100	80	65	–	–	–	130	115	100
	3	130	100	65	–	–	–	165	130	100
	4	180	130	80	165	150	115	180	165	115
H	1	–	–	–	–	–	–	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

続きを読むView Less

You are about to leave the Solution building process.

Are you sure you want to leave?

製品番号	5614839
ISO カタログ ID	KNSM250N17X34K040
ANSIカタログID	KNSM250N17X34K040
Insert Size [SSC]	34
[BM] Cutting Width Minimum	4 mm
[BM] Cutting Width Minimum	.16 in
[BMAX] Cutting Width Maximum	4.9 mm
[BMAX] Cutting Width Maximum	.193 in
[D1] Effective Cutting Diameter	250 mm
[D1] Effective Cutting Diameter	9.843 in
[D] Adapter / Shank / Bore Diameter	40 mm
[D] Adapter / Shank / Bore Diameter	1.58 in
[D6] Hub Diameter	55 mm
[D6] Hub Diameter	2.165 in
[CDX] Radial Maximum Depth of Cut	96 mm
[CDX] Radial Maximum Depth of Cut	3.78 in
[L1S] Secondary Gage Length	8 mm
[L1S] Secondary Gage Length	.315 in
[W1] Blade Width	3.4 mm
[W1] Blade Width	.134 in
[THUB] Hub Thickness	16 mm
[THUB] Hub Thickness	.63 in
Number of Inserts	17
Gage Insert	XCP34_____
Weight Kilograms	1.26
Max RPM	320

*に類似する製品:

KNS® • Arbor Mount • Metric