定価:
/包装. (包装単位 ) /各
割引: %
価格::
This item is not available
数量
販売包装単位 0
申し訳ありません。それほど多くの在庫はありません。
申し訳ありません。それほど多くの在庫はありません。今日現在の在庫数量:
最小包装サイズに合わせて調整されています。
販売包装単位 0
Downloaded file will be available after import in the {{cadTool}} tool library.
SAP Material Number | 2252796 |
ISO Catalog Number | KFSR400OF6445M5 |
ANSI Catalog Number | KFSR400OF6445M5 |
[D1] Effective Cutting Diameter | 101.6 mm |
[D1] Effective Cutting Diameter | 4 in |
[D1MAX] Maximum Cutting Diameter | 112.5 mm |
[D1MAX] Maximum Cutting Diameter | 4.431 in |
[D] Adapter / Shank / Bore Diameter | 31.75 mm |
[D] Adapter / Shank / Bore Diameter | 1.25 in |
[D6] Hub Diameter | 73.15 mm |
[D6] Hub Diameter | 2.88 in |
[L] Overall Length | 44.45 mm |
[L] Overall Length | 1.75 in |
[AP1MAX] 1st Maximum Cutting Depth | 5 mm |
[AP1MAX] 1st Maximum Cutting Depth | .1969 in |
Number of Inserts | 8 |
Weight Pounds | 3.1 |
Max RPM | 6300 |
Material Group | Light | General | Heavy | |||
(Light geometry) | – | (Strong geometry) | ||||
wear | toughness | |||||
Geometry | Grade | Geometry | Grade | Geometry | Grade | |
P1–P2 | .E..LB | KCPK30 | .E..GB | KCPM40 | .S..HB | KCPM40 |
P3–P4 | .E..LB | KCPK30 | .E..GB | KCPK30 | .S..HB | KCPK30 |
P5–P6 | .E..LB | KC725M | .E..GB | KC725M | .S..HB | KC725M |
M1–M2 | .E..LB | KC725M | .E..GB | KC725M | .S..HB | KC725M |
M3 | .E..LB | KCSM40 | .E..GB | KCSM40 | .S..HB | KCSM40 |
K1–K2 | .E..LB | KCK15 | .E..GB | KC520M | .S..HB | KCK15 |
K3 | .E..LB | KC520M | .E..GB | KC520M | .S..HB | KC520M |
N1–N2 | .F..LNJ | KC410M | .F..LNJ | KC410M | .F..LNJ | KC410M |
N3 | .F..LNJ | KC410M | .F..LNJ | KC410M | .F..LNJ | KC410M |
S1–S2 | .E..LB | KC725M | .E..GB | KC725M | .S..HB | KC725M |
S3 | .E..LB | KCSM40 | .E..GB | KCSM40 | .S..HB | KCSM40 |
S4 | .E..LB | KCSM40 | .E..GB | KCSM40 | .S..HB | KCSM40 |
H1 | – | – | – | – | – | – |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.F..LNJ | 0,17 | 0,67 | 1,20 | 0,12 | 0,49 | 0,86 | 0,09 | 0,36 | 0,64 | 0,08 | 0,32 | 0,56 | 0,07 | 0,29 | 0,51 | .F..LNJ |
.E..LB | 0,34 | 0,75 | 1,20 | 0,25 | 0,54 | 0,86 | 0,19 | 0,40 | 0,64 | 0,16 | 0,35 | 0,56 | 0,15 | 0,32 | 0,51 | .E..LB |
.S..LB | 0,34 | 0,73 | 1,33 | 0,25 | 0,53 | 0,96 | 0,19 | 0,39 | 0,71 | 0,16 | 0,34 | 0,62 | 0,15 | 0,32 | 0,57 | .S..LB |
.E..GB | 0,34 | 0,87 | 1,40 | 0,25 | 0,62 | 1,00 | 0,19 | 0,47 | 0,74 | 0,16 | 0,41 | 0,65 | 0,15 | 0,37 | 0,59 | .E..GB |
.S..HB | 0,34 | 0,87 | 1,49 | 0,25 | 0,62 | 1,07 | 0,19 | 0,47 | 0,79 | 0,16 | 0,41 | 0,69 | 0,15 | 0,37 | 0,63 | .S..HB |
Light | General | Heavy |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.F..LNJ | .007 | .027 | .048 | .005 | .019 | .035 | .004 | .015 | .026 | .003 | .013 | .022 | .003 | .012 | .021 | .F..LNJ |
.E..LB | .014 | .029 | .047 | .010 | .021 | .034 | .007 | .016 | .025 | .006 | .014 | .022 | .006 | .013 | .020 | .E..LB |
.S..LB | .014 | .029 | .053 | .010 | .021 | .038 | .007 | .016 | .028 | .006 | .014 | .025 | .006 | .012 | .022 | .S..LB |
.E..GB | .014 | .034 | .055 | .010 | .025 | .039 | .007 | .018 | .029 | .006 | .016 | .026 | .006 | .015 | .023 | .E..GB |
.S..HB | .014 | .034 | .059 | .010 | .025 | .042 | .007 | .018 | .031 | .006 | .016 | .027 | .006 | .015 | .025 | .S..HB |
Light | General | Heavy |
Material Group | KC410M | KC520M | KC522M | KC725M | KCK15 | KCPM20 | KCPK30 | |||||||||||||||
P | 1 | – | – | – | – | – | – | 395 | 345 | 325 | 315 | 275 | 255 | – | – | – | 660 | 580 | 535 | 545 | 475 | 440 |
2 | – | – | – | – | – | – | 330 | 290 | 240 | 260 | 230 | 195 | – | – | – | 410 | 370 | 330 | 335 | 305 | 275 | |
3 | – | – | – | – | – | – | 305 | 255 | 215 | 240 | 205 | 170 | – | – | – | 370 | 330 | 305 | 305 | 275 | 250 | |
4 | – | – | – | – | – | – | 270 | 225 | 180 | 215 | 180 | 145 | – | – | – | 275 | 255 | 230 | 225 | 210 | 190 | |
5 | – | – | – | – | – | – | 225 | 200 | 180 | 180 | 160 | 145 | – | – | – | 330 | 300 | 275 | 310 | 275 | 255 | |
6 | – | – | – | – | – | – | 200 | 150 | 120 | 160 | 120 | 95 | – | – | – | 230 | 200 | 175 | 190 | 165 | – | |
M | 1 | – | – | – | – | – | – | 245 | 215 | 200 | 205 | 180 | 165 | – | – | – | 270 | 240 | 205 | 250 | 220 | 190 |
2 | – | – | – | – | – | – | 225 | 190 | 160 | 185 | 160 | 130 | – | – | – | 245 | 215 | 190 | 225 | 195 | 170 | |
3 | – | – | – | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | – | – | – | 195 | 175 | 150 | 175 | 160 | 140 | |
K | 1 | – | – | – | 325 | 295 | 260 | 275 | 250 | 220 | – | – | – | 505 | 460 | 410 | 435 | 390 | 350 | 355 | 320 | 285 |
2 | – | – | – | 255 | 225 | 215 | 215 | 195 | 180 | – | – | – | 400 | 355 | 330 | 345 | 310 | 280 | 280 | 255 | 230 | |
3 | – | – | – | 215 | 190 | 170 | 180 | 160 | 145 | – | – | – | 335 | 300 | 275 | 290 | 255 | 240 | 235 | 210 | 195 | |
N | 1–2 | 1460 | 1300 | 1195 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
3 | 1300 | 1195 | 1100 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | – | – | – | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Material Group | KC410M | KC520M | KC522M | KC725M | KCK15 | KCPK30 | |||||||||||||
P | 1 | – | – | – | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | – | – | – | 1780 | 1560 | 1450 |
2 | – | – | – | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | – | – | – | 1100 | 1000 | 900 | |
3 | – | – | – | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | – | – | – | 1000 | 900 | 820 | |
4 | – | – | – | – | – | – | 890 | 730 | 590 | 710 | 590 | 470 | – | – | – | 740 | 690 | 620 | |
5 | – | – | – | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | – | – | – | 1020 | 910 | 830 | |
6 | – | – | – | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | – | – | – | 620 | 540 | – | |
M | 1 | – | – | – | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | – | – | – | 820 | 720 | 620 |
2 | – | – | – | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | – | – | – | 730 | 640 | 550 | |
3 | – | – | – | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | – | – | – | 570 | 520 | 460 | |
K | 1 | – | – | – | 1060 | 960 | 850 | 900 | 820 | 720 | – | – | – | 1660 | 1510 | 1340 | 1160 | 1050 | 940 |
2 | – | – | – | 830 | 740 | 700 | 710 | 640 | 590 | – | – | – | 1310 | 1170 | 1090 | 920 | 830 | 760 | |
3 | – | – | – | 700 | 620 | 560 | 590 | 530 | 480 | – | – | – | 1100 | 980 | 900 | 770 | 690 | 640 | |
N | 1–2 | 4790 | 4260 | 3920 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
3 | 4260 | 3920 | 3600 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – |
2 | – | – | – | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
D1 mm | D1 max mm | Ap max | ramping angle (°) | ramping length mm |
63 | 74,2 | 11,7 | 5,5 | 121,5 |
80 | 91,1 | 11,7 | 4,0 | 167,3 |
100 | 111,0 | 11,7 | 3,0 | 223,2 |
125 | 135,9 | 11,7 | 2,3 | 291,3 |
160 | 170,8 | 11,7 | 1,7 | 394,2 |
max DOC Ap | mm | chipload (fz) |
Ap1 max | 5,0 | 1 x fz |
Ap2 max | 11,7 | 0,6 x fz |
max plunging depth | mm |
Ap1 max | 4,2 |
D1 mm | D1 max mm | hole diameter | Ap/rev mm | |
min mm | max mm | |||
63 | 74,2 | 122,7 | 145,0 | 6,3 |
80 | 91,1 | 156,6 | 178,0 | 6,3 |
100 | 111,0 | 196,5 | 218,7 | 6,3 |
125 | 135,9 | 246,4 | 268,7 | 6,3 |
160 | 170,8 | 316,3 | 338,6 | 6,3 |
D1 inch | D1 max inch | Ap max inch | ramping angle (°) | ramping length inch |
2.50 | 2.94 | .46 | 5.5 | 4.78 |
3.00 | 3.44 | .46 | 4.2 | 6.27 |
4.00 | 4.43 | .46 | 2.9 | 9.09 |
5.00 | 5.43 | .46 | 2.2 | 11.99 |
6.00 | 6.43 | .46 | 1.8 | 14.65 |
max DOC Ap | inch | chipload (fz) |
Ap1 max | .20 | 1 x fz |
Ap2 max | .46 | 0,6 x fz |
max plunging depth | inch |
Ap1 max | .17 |
hole diameter | ||||
D1 inch | D1 max inch | min inch | max inch | Ap/Rev inch |
2.50 | 2.94 | 4.872 | 5.748 | .248 |
3.00 | 3.44 | 5.868 | 6.744 | .248 |
4.00 | 4.43 | 7.863 | 8.739 | .248 |
5.00 | 5.43 | 9.859 | 10.736 | .248 |
6.00 | 6.43 | 11.857 | 12.733 | .248 |
ISO製品型番
ANSI製品型番
to find similar products.Please select a file to download
Models
Product data
I have read and accepted the Terms & Conditions of use
Can’t find the file type you’re looking for?
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
SAP Material Number | ISO製品型番 | 材種 |
---|
You are about to leave the Solution building process.
Are you sure you want to leave?