KM63TS™
Filter
Filter
Filter anzeigen in
MetricInch
Werkstoff des Werkstücks
Werkstoff des Werkstücks
- P Stahl (263)
- P0Kohlenstoffarme Stähle, langspanend C < .25%; <125 HB; <530 N/mm^2 UTS(261)
- P1Kohlenstoffarme Stähle, kurzspanend C < .25%; <125 HB; <530 N/mm^2 UTS(261)
- P2Stähle mit mittlerem und hohem Kohlenstoffgehalt C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(261)
- P3Legierter Stahl/Werkzeugstahl C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(261)
- P4Legierter Stahl/Werkzeugstahl C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(261)
- P5Ferritische, martensitische und Rostfreie PH-Stähle <330 HB; <35 HRC; 600-900 N/mm^2 UTS(263)
- P6Hochfeste ferritische, martensitische und PH-Edelstähle 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(263)
- M Rostfreier Stahl (261)
- M1Austenitischer, Rostfreier Stahl 130-200 HB; <600 N/mm^2 UTS(261)
- M2Hochfeste austenitische, rostfreie Stähle und Edelstahlguss 150-230 HB; <25 HRC; >600 N/mm^2 UTS(261)
- M3Duplex-Edelstahl 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(261)
- K Gusseisen (272)
- K1Grauguss 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(272)
- K2GGV- und Sphäroguss mit niedriger bis mittlerer Festigkeit 130-260 HB; <28 HRC; <600 N/mm^2 UTS(272)
- K3Hochfestes und zwischenstufenvergütetes duktiles Gusseisen 180-350 HB; <43 HRC; >600 N/mm^2 UTS(272)
- N Buntmetalle (265)
- N1Geschmiedetes Aluminium (262)
- N2Aluminiumlegierungen mit geringem Siliziumgehalt und Magnesiumlegierungen Si <12,2 %(262)
- N3Aluminiumlegierungen mit hohem Siliziumgehalt Si >12,2%(164)
- N4Kupfer-, Messing- und Zink-Basis mit einem Zerspanbarkeitsindex von 70 bis 100 (265)
- N5Nylon, Kunststoffe, Gummi, Phenole und Glasfaser (262)
- N6Kohlefaser- und Graphit-Verbundwerkstoffe, CFRP (260)
- N7MMCs (239)
- S Hochwarmfeste Legierungen (272)
- S1Warmfeste Legierungen auf Eisenbasis 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(272)
- S2Warmfeste Legierungen auf Kobaltbasis 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(272)
- S3Warmfeste Legierungen auf Nickelbasis 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(272)
- S4Titan und Titanlegierungen 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(266)
- H Gehärtete Werkstoffe (254)
- H1Gehärtete Werkstoffe 44-48 HRC(254)
- H2Gehärtete Werkstoffe 48-55 HRC(254)
- H3Gehärtete Werkstoffe 56-60 HRC(253)
- H4Gehärtete Werkstoffe >60 HRC(201)
- C Verbundwerkstoffe (CFRP) (244)
- C1CFRP, CFRP / CFRP (242)
- C2CFRP / Aluminium CFRP / Nichteisen (222)
Anwendungen
Anwendungen
Chamfer Turning (4)
Cut-Off (4)
Deep Grooving (4)
Face Grooving (4)
Facing (202)
Grooving (11)
ID Grooving (7)
ID Thread Turning (15)
Multiple Direction Cutting (188)
OD Thread Turning (19)
Plunge Turning (4)
Profiling (131)
TRN Boring (176)
Turning (246)
Gewindeart
Gewindeart
- 55 (8)
- 60 (18)
- ACME (18)
- API (14)
- API BUTTRESS (4)
- API RD (10)
- BSPT (4)
- BSW (14)
- BUTTRESS (10)
- M (14)
- NPT (10)
- NPTF (4)
- RD DIN 405 (8)
- STUB ACME (14)
- TR DIN 103 (8)
- UN (14)
- UNJ (10)
Schnittbedingung
Schnittbedingung
- Heavily Interrupted Cut (262)
- Lightly Interrupted Cut (262)
- Smooth Cut (262)
ISO-Einstellwinkel [KRI]
ISO-Einstellwinkel [KRI]
- 45.0 (21)
- 48.0 (6)
- 49.783 (1)
- 50.0 (1)
- 62.5 (2)
- 63.0 (4)
- 72.5 (1)
- 75.0 (48)
- 90.0 (43)
- 93.0 (69)
- 95.0 (68)
- 107.5 (18)
bis
Anschlussart
Anschlussart
- KM (155)
Schneidkanten pro Wendeschneidplatte
Schneidkanten pro Wendeschneidplatte
- 0.0 (11)
- 1.0 (152)
- 2.0 (174)
- 3.0 (43)
- 4.0 (196)
- 6.0 (35)
- 8.0 (126)
bis
Innere Kühlmittelzuführung
Innere Kühlmittelzuführung
Gesamtlänge [L]
Gesamtlänge [L]
- 2.362 in(217)
- 3.15 in(2)
- 3.543 in(3)
- 3.938 in(4)
- 4.529 in(8)
- 4.921 in(14)
- 5.513 in(25)
- 6.694 in(9)
bis
Gesamtlänge [L]
Gesamtlänge [L]
- 60.0 mm(217)
- 80.0 mm(2)
- 90.0 mm(3)
- 100.0 mm(4)
- 115.0 mm(8)
- 125.0 mm(14)
- 140.0 mm(25)
- 170.0 mm(9)
bis
Eckenradius
Eckenradius
- 0.001 in(3)
- 0.002 in(18)
- 0.003 in(14)
- 0.004 in(154)
- 0.005 in(7)
- 0.006 in(13)
- 0.007 in(11)
- 0.008 in(138)
- 0.01 in(11)
- 0.011 in(8)
- 0.012 in(9)
- 0.014 in(46)
- 0.015 in(1)
- 0.016 in(215)
- 0.017 in(4)
- 0.019 in(10)
- 0.02 in(6)
- 0.021 in(2)
- 0.023 in(11)
- 0.024 in(15)
- 0.028 in(1)
- 0.03 in(1)
- 0.031 in(256)
- 0.033 in(1)
- 0.035 in(10)
- 0.037 in(2)
- -0.039 in(11)
- 0.039 in(7)
- 0.047 in(256)
- 0.049 in(6)
- 0.055 in(1)
- 0.06 in(7)
- 0.062 in(44)
- 0.063 in(229)
- 0.069 in(6)
- 0.078 in(6)
- 0.079 in(10)
- 0.089 in(10)
- 0.094 in(47)
- 0.095 in(98)
- 0.098 in(4)
- 0.125 in(15)
- 0.126 in(47)
- 0.157 in(14)
- 0.25 in(4)
- 0.315 in(1)
bis
Eckenradius
Eckenradius
- 0.025 mm(3)
- 0.05 mm(18)
- 0.076 mm(14)
- 0.1 mm(154)
- 0.125 mm(7)
- 0.151 mm(13)
- 0.176 mm(11)
- 0.2 mm(138)
- 0.225 mm(7)
- 0.25 mm(11)
- 0.275 mm(8)
- 0.301 mm(9)
- 0.325 mm(12)
- 0.351 mm(44)
- 0.375 mm(1)
- 0.4 mm(215)
- 0.426 mm(4)
- 0.45 mm(10)
- 0.476 mm(3)
- 0.5 mm(6)
- 0.525 mm(2)
- 0.576 mm(11)
- 0.601 mm(15)
- 0.701 mm(1)
- 0.75 mm(1)
- 0.775 mm(6)
- 0.8 mm(250)
- 0.826 mm(1)
- 0.9 mm(10)
- 0.925 mm(2)
- -1.0 mm(11)
- 1.0 mm(7)
- 1.201 mm(256)
- 1.25 mm(6)
- 1.401 mm(1)
- 1.5 mm(6)
- 1.526 mm(1)
- 1.576 mm(44)
- 1.6 mm(229)
- 1.75 mm(6)
- 1.975 mm(6)
- 2.0 mm(10)
- 2.25 mm(10)
- 2.375 mm(47)
- 2.401 mm(98)
- 2.5 mm(4)
- 3.176 mm(15)
- 3.2 mm(47)
- 4.0 mm(14)
- 6.351 mm(4)
- 8.0 mm(1)
bis
application
Minimale Schnitttiefe
Minimale Schnitttiefe
Minimaler Vorschub
Minimaler Vorschub
Schneidstoffsorte
Schneidstoffsorte
- 13E (170)
- 241 (38)
- AC5 (3)
- CL4 (120)
- CM2 (174)
- CM3 (131)
- CM4 (78)
- CPX (175)
- CW2 (76)
- CW2015 (153)
- CW3020 (9)
- CW5025 (169)
- GH1 (2)
- GX (93)
- HCK10 (5)
- HCK20 (1)
- HK1500 (115)
- HK35 (5)
- HT2 (92)
- HTX (53)
- HWK15 (5)
- K00326 (8)
- K00331 (2)
- K060 (99)
- K090 (209)
- K1 (73)
- K1010P (2)
- K10M (212)
- K10P (195)
- K10U (167)
- K15 (3)
- K15U (167)
- K20K (221)
- K21 (99)
- K25M (188)
- K25P (194)
- K2885 (6)
- K313 (252)
- K35P (142)
- K420 (176)
- K45 (110)
- K4H (6)
- K6 (3)
- K68 (233)
- K8735 (8)
- KB1340 (74)
- KB1345 (85)
- KB1610 (118)
- KB1625 (107)
- KB1630 (92)
- KB5610 (98)
- KB5625 (113)
- KB5630 (79)
- KB9610 (156)
- KB9640 (91)
- KBH10 (152)
- KBH10B (113)
- KBH20 (162)
- KBH20B (113)
- KBK35 (42)
- KBK45 (7)
- KC210 (155)
- KC250 (155)
- KC5010 (256)
- KC5020P (4)
- KC5025 (258)
- KC5410 (229)
- KC5510 (220)
- KC5525 (138)
- KC710 (54)
- KC720 (190)
- KC722 (50)
- KC730 (214)
- KC7310 (227)
- KC732 (166)
- KC8050 (242)
- KC810 (255)
- KC850 (256)
- KC9010 (221)
- KC9025 (241)
- KC910 (241)
- KC9105 (224)
- KC9110 (251)
- KC9120 (243)
- KC9125 (241)
- KC9125RR (20)
- KC9140 (222)
- KC9145 (207)
- KC9210 (34)
- KC9215 (219)
- KC9225 (239)
- KC9240 (232)
- KC9240NEW (232)
- KC9245 (220)
- KC9315 (242)
- KC9320 (242)
- KC9325 (231)
- KC935 (251)
- KC950 (240)
- KC990 (233)
- KCD25 (47)
- KCK05 (240)
- KCK05B (216)
- KCK15 (233)
- KCK15B (240)
- KCK20 (244)
- KCK20B (244)
- KCM15 (231)
- KCM15B (221)
- KCM25 (240)
- KCM25B (231)
- KCM25S (2)
- KCM35 (222)
- KCM35B (168)
- KCP05 (205)
- KCP05B (172)
- KCP10 (241)
- KCP10B (251)
- KCP15 (2)
- KCP20S (2)
- KCP25 (242)
- KCP25B (251)
- KCP25C (242)
- KCP30 (233)
- KCP30B (205)
- KCP40 (200)
- KCP40B (215)
- KCPK05 (217)
- KCS10 (49)
- KCS10B (226)
- KCS25S (2)
- KCU10 (252)
- KCU10B (252)
- KCU25 (250)
- KCU25B (249)
- KD050 (123)
- KD081 (126)
- KD100 (96)
- KD120 (130)
- KD1400 (102)
- KD1405 (77)
- KD1425 (116)
- KM1 (87)
- KMF (38)
- KN10S (2)
- KS15 (46)
- KT1120 (41)
- KT125 (154)
- KT150 (107)
- KT175 (154)
- KT315 (199)
- KT325 (96)
- KT5020 (13)
- KTP10 (167)
- KTP25S (136)
- KU10 (4)
- KU10T (191)
- KU25T (12)
- KU30T (243)
- KY1310 (141)
- KY1320 (205)
- KY1525 (9)
- KY1540 (121)
- KY1615 (186)
- KY2000 (129)
- KY2100 (95)
- KY2200 (3)
- KY3000 (215)
- KY3400 (176)
- KY3500 (221)
- KY4000 (86)
- KY4300 (101)
- KY4400 (198)
- KYHK15B (196)
- KYK10 (114)
- KYK25 (162)
- KYK35 (219)
- KYS25 (107)
- KYS30 (122)
- MC2 (5)
- MC3 (2)
- NL200 (72)
- NL250 (218)
- NL300 (160)
- NL400 (79)
- NL920 (161)
- P25 (72)
- PB100 (40)
- PB170 (41)
- PB250 (43)
- PB300 (34)
- PD100 (5)
- PD50 (5)
- PN120 (1)
- PS5 (81)
- SP0819 (151)
- SP0A00 (16)
- SP0PW3 (3)
- SP3019 (128)
- SP4019 (143)
- SP4036 (9)
- SP4066 (1)
- SP4093 (9)
- SP61EJ (20)
- SPADAP (24)
- SPN4W2 (14)
- SPSREJ (9)
- THM (98)
- THM-X (81)
- THMF-X (51)
- TN10P (186)
- TN10U (141)
- TN15M (182)
- TN15U (138)
- TN2000 (132)
- TN20K (194)
- TN20P (203)
- TN30M (191)
- TN30P (170)
- TN4000 (127)
- TN5015 (182)
- TN5020 (158)
- TN5105 (139)
- TN5120 (180)
- TN6010 (113)
- TN6025 (117)
- TN7005 (115)
- TN7010 (192)
- TN7015 (193)
- TN7025 (190)
- TN7035 (159)
- TN7105 (102)
- TN7110 (179)
- TN7115 (180)
- TN7125 (168)
- TN7135 (159)
- TN8025 (180)
- TTI15 (76)
- TTM (6)
- TTM09 (41)
- TTR (62)
- TTR-X (14)
- TTS (105)
- TTX (77)
- W00342 (20)
- WBH10C (124)
- WBH10P (69)
- WBH10U (99)
- WBH20P (133)
- WBH25P (86)
- WBH25U (110)
- WBH30P (69)
- WBK40U (63)
- WBK45U (98)
- WDN00U (56)
- WDN25U (90)
- WK05CT (200)
- WK15CT (115)
- WK20CT (206)
- WM15CT (201)
- WM25CT (201)
- WM35CT (190)
- WP05CT (47)
- WP15CT (203)
- WP20TT (11)
- WP25CT (203)
- WP35CT (199)
- WS10PT (189)
- WS25PT (196)
- WU05PT (9)
- WU10HT (190)
- WU10PT (128)
- WU25PT (127)
- X00511 (38)
- X00580 (38)
- X00581 (38)
- X00582 (38)
- X00583 (38)
- X00584 (38)
- X00585 (38)
- X00586 (38)
- X00591 (38)
- X00592 (38)
- X00593 (38)
- X00594 (38)
- X00596 (38)
- X00597 (38)
- X00599 (38)
Schneidrichtung
Schneidrichtung
- L (70)
- N (12)
- R (73)
Schlicht-Wendeschneidplatte
Schlicht-Wendeschneidplatte
- N (277)
- Y (118)
F Abmessung
F Abmessung
- 0.0 mm(15)
- 8.0 mm(1)
- 17.0 mm(12)
- 22.0 mm(17)
- 27.0 mm(21)
- 35.0 mm(12)
- 38.0 mm(18)
- 43.0 mm(57)
- 59.0 mm(2)
bis
F Abmessung
F Abmessung
- 0.0 in(15)
- 0.315 in(1)
- 0.669 in(12)
- 0.866 in(17)
- 1.063 in(21)
- 1.379 in(12)
- 1.496 in(18)
- 1.693 in(57)
- 2.323 in(2)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 mm(4)
- -1.0 mm(7)
- 32.0 mm(12)
- 40.0 mm(17)
- 41.301 mm(2)
- 47.6 mm(2)
- 50.0 mm(16)
- 57.2 mm(2)
- 63.0 mm(12)
- 80.0 mm(40)
- 86.0 mm(74)
- 88.9 mm(2)
- 90.0 mm(2)
- 100.0 mm(17)
- 118.0 mm(2)
- 139.701 mm(2)
- 174.601 mm(2)
- 209.601 mm(2)
- 222.3 mm(2)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 in(4)
- -0.039 in(7)
- 1.26 in(12)
- 1.575 in(17)
- 1.627 in(2)
- 1.874 in(2)
- 1.969 in(16)
- 2.253 in(2)
- 2.48 in(12)
- 3.15 in(40)
- 3.386 in(74)
- 3.5 in(2)
- 3.543 in(2)
- 3.938 in(17)
- 4.646 in(2)
- 5.5 in(2)
- 6.875 in(2)
- 8.252 in(2)
- 8.752 in(2)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- -0.039 in(11)
- 393.661 in(11)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- -1.0 mm(11)
- 9999.0 mm(11)
bis
Schneidrichtung
Schneidrichtung
- B (37)
- E (39)
- S (79)
Spanwinkelausführung
Spanwinkelausführung
- DOUBLE NEGATIVE (123)
- NEGATIVE-ZERO (17)
- NEUTRAL (ZERO) (15)
Bohrungstiefe min.
Bohrungstiefe min.
- 1.986 in(2)
- 2.362 in(127)
- 2.444 in(3)
- 3.037 in(4)
- 3.473 in(8)
- 3.485 in(2)
- 4.11 in(4)
- 4.412 in(12)
- 4.418 in(2)
- 4.464 in(1)
- 4.529 in(8)
- 4.612 in(10)
- 4.621 in(1)
- 5.883 in(8)
bis
Bohrungstiefe min.
Bohrungstiefe min.
- 50.45 mm(2)
- 60.0 mm(127)
- 62.075 mm(3)
- 77.15 mm(4)
- 88.226 mm(8)
- 88.525 mm(2)
- 104.4 mm(4)
- 112.075 mm(12)
- 112.226 mm(2)
- 113.375 mm(1)
- 115.0 mm(8)
- 117.15 mm(10)
- 117.375 mm(1)
- 149.4 mm(8)
bis
Bohrstangenmaterial
Bohrstangenmaterial
- S (63)
frontEnd
Stirnseitige Aufnahme
Stirnseitige Aufnahme
- BORING BAR ADAPTER (21)
- CARTRIDGE MOUNT (22)
- COMBI SHELL ADAPTER (3)
- CUTOFF SUPPORT BLADE (6)
- END MILL ADAPTER (13)
- ER COLLET CHUCK (7)
- EXTENSION (2)
- HYDRAULIC CHUCK (16)
- HYDRAULIC CHUCK-HIGH TORQUE (2)
- HYDRAULIC CHUCK-SLIM LINE (8)
- KM MODULAR ADAPTER (6)
- KM MODULAR ADAPTER-4 UNITS (1)
- RC TAP CHUCK ADAPTER-T & C (2)
- REDUCER (4)
- SCREW-ON ADAPTER (14)
- SHELL MILL ADAPTER (11)
- SHRINK FIT ADAPTER (15)
- SQUARE SHANK ADAPTER (8)
- WHISTLE NOTCH ADAPTER (3)
Spannsystem
Spannsystem
- C (16)
- D (32)
- M (107)
- N (19)
- P (92)
- S (16)
Schnittbreite
Schnittbreite
- 0.039 in(6)
- 0.047 in(6)
- 0.06 in(6)
- 0.062 in(6)
- 0.069 in(6)
- 0.073 in(6)
- 0.078 in(6)
- 0.079 in(6)
- 0.088 in(6)
- 0.089 in(3)
- 0.094 in(3)
- 0.095 in(6)
- 0.097 in(6)
- 0.098 in(6)
- 0.105 in(6)
- 0.108 in(6)
- 0.11 in(6)
- 0.119 in(10)
- 0.122 in(6)
- 0.125 in(10)
- 0.126 in(10)
- 0.128 in(6)
- 0.131 in(3)
- 0.138 in(10)
- 0.143 in(6)
- 0.156 in(6)
- 0.157 in(10)
- 0.167 in(10)
- 0.169 in(6)
- 0.177 in(10)
- 0.178 in(6)
- 0.185 in(8)
- 0.188 in(10)
- 0.189 in(10)
- 0.192 in(3)
- 0.193 in(3)
- 0.195 in(6)
- 0.196 in(6)
- 0.197 in(5)
- 0.202 in(4)
- 0.213 in(4)
- 0.217 in(4)
- 0.219 in(4)
- 0.237 in(5)
- 0.25 in(5)
- 0.256 in(4)
- 0.276 in(1)
- 0.281 in(1)
- 0.312 in(1)
- 0.315 in(1)
- 0.345 in(1)
- 0.354 in(1)
- 0.375 in(1)
- 0.381 in(1)
bis
Schnittbreite
Schnittbreite
- 1.0 mm(6)
- 1.201 mm(6)
- 1.5 mm(6)
- 1.576 mm(6)
- 1.75 mm(6)
- 1.826 mm(6)
- 1.975 mm(6)
- 2.0 mm(6)
- 2.2 mm(6)
- 2.225 mm(6)
- 2.25 mm(3)
- 2.375 mm(3)
- 2.401 mm(6)
- 2.475 mm(6)
- 2.5 mm(6)
- 2.676 mm(6)
- 2.75 mm(6)
- 2.801 mm(6)
- 3.0 mm(10)
- 3.1 mm(6)
- 3.176 mm(10)
- 3.2 mm(10)
- 3.25 mm(6)
- 3.325 mm(3)
- 3.5 mm(10)
- 3.6 mm(6)
- 3.95 mm(6)
- 3.975 mm(3)
- 4.0 mm(10)
- 4.25 mm(10)
- 4.3 mm(6)
- 4.5 mm(10)
- 4.525 mm(6)
- 4.7 mm(8)
- 4.775 mm(10)
- 4.801 mm(10)
- 4.875 mm(3)
- 4.9 mm(3)
- 4.95 mm(6)
- 4.976 mm(6)
- 5.0 mm(5)
- 5.125 mm(4)
- 5.4 mm(4)
- 5.5 mm(4)
- 5.575 mm(4)
- 6.0 mm(5)
- 6.351 mm(5)
- 6.5 mm(4)
- 7.0 mm(1)
- 7.125 mm(1)
- 7.926 mm(1)
- 8.0 mm(1)
- 8.75 mm(1)
- 9.0 mm(1)
- 9.525 mm(1)
- 9.675 mm(1)
bis
Stirnseitentyp
Stirnseitentyp
- BKA - Boring Head Adapter (7)
- FDA - Milling Cutter Arbor (14)
- KMS - KM TBD System (1)
- KMT - KM Adapter (12)
- MCS - Modular Cartridge System (22)
- PMK - Prismatic Adapter Kenna (6)
- SWB - Tap Chuck Adapter (2)
- SZK - Collet Taper (7)
- VKT - Square Shank (8)
- ZYL - Cylindrical Adapter (85)
Wendeschneidplatten-Form
Wendeschneidplatten-Form
- C-DIAMOND/RHOMBIC 80 (73)
- D-DIAMOND/RHOMBIC 55 (74)
- LT-TRIANGLE LAY DOWN THREAD 60 (12)
- R-ROUND (5)
- S-SQUARE 90 (49)
- T-TRIANGLE 60 (22)
- TN-TOP NOTCH (11)
- V-DIAMOND/RHOMBIC 35 (19)
- W-TRIGON 80 (17)
Stirnseitenausführung
Stirnseitenausführung
- BKA01 Intchg Heads (H) Pilot (7)
- FDA12 Transv Drive&CutRetScr (7)
- FDA13 Long&TranDrv&CutRetScr (3)
- FDA22 Transv Drive & SHCS (3)
- FDA42TranDrvw/CtrScrwORBoltCir (1)
- KMS-01 Std KM-TBD NotOnCntr (1)
- KMT00 All KM, except 02,05,09 (12)
- MCS01 Modular Deep Grooving (22)
- PMK02 Cutoff Sup Bld A1-A3 (6)
- SWB-01 WFL#...WES#(Bilz) (2)
- SZK02 Collets 8 Degree Taper (7)
- VKT01 Std Design (8)
- ZYL01 Straight Shank (41)
- ZYL03 Attachment Thread (14)
- ZYL10 Weldon Shank (13)
- ZYL13 2Deg-Whistle Notch (3)
- ZYL22 Boring Bar Shank (14)
Wende-schneid-platten-Größe
Wende-schneid-platten-Größe
- 3 (6)
- 4 (4)
- 5 (1)
Maximale Stechtiefe
Maximale Stechtiefe
- 0.21 in(4)
- 0.294 in(2)
- 1.299 in(1)
bis
Maximale Stechtiefe
Maximale Stechtiefe
- 5.325 mm(4)
- 7.476 mm(2)
- 33.0 mm(1)
bis
Messlänge
Messlänge
- 3 in(1)
- 4 in(1)
- 0.906 in(2)
- 0.984 in(2)
- 1.024 in(1)
- 1.102 in(1)
- 1.26 in(5)
- 1.379 in(2)
- 1.389 in(2)
- 1.575 in(3)
- 1.772 in(2)
- 1.969 in(2)
- 2.106 in(4)
- 2.165 in(4)
- 2.177 in(2)
- 2.303 in(6)
- 2.323 in(4)
- 2.362 in(8)
- 2.5 in(8)
- 2.559 in(6)
- 2.618 in(4)
- 2.757 in(7)
- 2.953 in(3)
- 3.098 in(1)
- 3.15 in(14)
- 3.25 in(2)
- 3.307 in(3)
- 3.346 in(3)
- 3.375 in(1)
- 3.543 in(5)
- 3.74 in(5)
- 3.75 in(1)
- 3.938 in(7)
- 4.134 in(2)
- 4.291 in(5)
- 4.488 in(2)
- 4.529 in(1)
- 4.724 in(6)
- 5.276 in(2)
- 5.287 in(1)
- 5.297 in(2)
- 5.787 in(1)
- 6.299 in(3)
- 6.694 in(5)
- 8.162 in(1)
- 9.234 in(1)
- 11.161 in(1)
- 12.233 in(1)
- 13.161 in(1)
- 14.162 in(1)
- 14.233 in(1)
- 15.161 in(1)
- 15.233 in(1)
- 16.233 in(1)
- 19.162 in(1)
- 20.233 in(1)
Messlänge
Messlänge
- 80 mm(14)
- 60 mm(8)
- 100 mm(7)
- 70 mm(7)
- 120 mm(6)
- 65 mm(6)
- 109 mm(5)
- 170 mm(5)
- 32 mm(5)
- 90 mm(5)
- 95 mm(5)
- 55 mm(4)
- 59 mm(4)
- 160 mm(3)
- 40 mm(3)
- 75 mm(3)
- 84 mm(3)
- 85 mm(3)
- 105 mm(2)
- 114 mm(2)
- 134 mm(2)
- 23 mm(2)
- 25 mm(2)
- 35 mm(2)
- 45 mm(2)
- 50 mm(2)
- 115 mm(1)
- 147 mm(1)
- 26 mm(1)
- 28 mm(1)
- 35.25 mm(2)
- 53.5 mm(4)
- 55.301 mm(2)
- 58.5 mm(6)
- 63.5 mm(8)
- 66.5 mm(4)
- 76.2 mm(1)
- 78.7 mm(1)
- 82.551 mm(2)
- 85.726 mm(1)
- 95.25 mm(1)
- 101.601 mm(1)
- 134.3 mm(1)
- 134.55 mm(2)
- 207.326 mm(1)
- 234.55 mm(1)
- 283.5 mm(1)
- 310.701 mm(1)
- 334.3 mm(1)
- 359.725 mm(1)
- 361.526 mm(1)
- 385.1 mm(1)
- 386.925 mm(1)
- 412.326 mm(1)
- 486.725 mm(1)
- 513.926 mm(1)
Größe der Stirnseite
Größe der Stirnseite
- 0.237 in(3)
- 0.25 in(1)
- 0.315 in(3)
- 0.375 in(3)
- 0.394 in(4)
- 0.473 in(5)
- 0.5 in(5)
- 0.551 in(3)
- 0.625 in(3)
- 0.63 in(5)
- 0.709 in(3)
- 0.75 in(6)
- 0.787 in(6)
- 0.866 in(1)
- 0.875 in(1)
- 0.984 in(5)
- 1.0 in(6)
- 1.063 in(2)
- 1.22 in(1)
- 1.25 in(5)
- 1.26 in(9)
- 1.5 in(4)
- 1.575 in(11)
- 1.75 in(1)
- 1.891 in(1)
- 1.969 in(2)
- 2.0 in(3)
- 2.48 in(2)
- 2.5 in(2)
bis
Größe der Stirnseite
Größe der Stirnseite
- 6.0 mm(3)
- 6.351 mm(1)
- 8.0 mm(3)
- 9.525 mm(3)
- 10.0 mm(4)
- 12.0 mm(5)
- 12.701 mm(5)
- 14.0 mm(3)
- 15.875 mm(3)
- 16.0 mm(5)
- 18.0 mm(3)
- 19.05 mm(6)
- 20.0 mm(6)
- 22.0 mm(1)
- 22.225 mm(1)
- 25.0 mm(5)
- 25.401 mm(6)
- 27.0 mm(2)
- 31.0 mm(1)
- 31.75 mm(5)
- 32.0 mm(9)
- 38.1 mm(4)
- 40.0 mm(11)
- 44.45 mm(1)
- 48.0 mm(1)
- 50.0 mm(2)
- 50.801 mm(3)
- 63.0 mm(2)
- 63.5 mm(2)
bis
insertGeometry
Schneidstoff
Schneidstoff
- B H (203)
- B L (184)
- C A (224)
- C N (237)
- D P (158)
- H T (199)
- H W (272)
backEnd
Aufnahmeart
Aufnahmeart
- TAPER SHANK (155)
Systemgröße
Systemgröße
- KM40TS (2)
- KM50TS (4)
- KM63TS (300)
- KM63UT (1)
- KM63XMZ (4)
- KM80ATC (4)
- KM80TS (4)
Hinterer Durchmesser
Hinterer Durchmesser
- 40.0 mm(2)
- 50.0 mm(4)
- 63.0 mm(432)
- 80.0 mm(8)
bis
Hinterer Durchmesser
Hinterer Durchmesser
- 1.575 in(2)
- 1.969 in(4)
- 2.48 in(432)
- 3.15 in(8)
bis
No filters matching ""
