Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Itens adicionado com sucesso ao carrinho
Ver o carrinho
Exit Search Voltar à solução

Editando solução

Adicionando solução

Nome da solução:{{SolutionName}}

    Produto semelhante ao:

    voltar a | Modificar semelhante a

    Brocas piloto • B505Z• K10 • Haste versão A • Brocas de escarear NC sem refrigeração

    Brocas de escarear NC • Sem refrigeração

    Número de material100003652

    Brocas piloto • B505Z• K10 • Haste versão A • Brocas de escarear NC sem refrigeração
    Brocas piloto • B505Z• K10 • Haste versão A • Brocas de escarear NC sem refrigeração
    Brocas piloto • B505Z• K10 • Haste versão A • Brocas de escarear NC sem refrigeração
    Open expanded view
    Brocas piloto • B505Z• K10 • Haste versão A • Brocas de escarear NC sem refrigeração
    Brocas piloto • B505Z• K10 • Haste versão A • Brocas de escarear NC sem refrigeração
    Representação genérica
    Entre em contacto com a nossa equipa Comercial  para saber todas as suas opções de preços

    Características e benefícios

    • Brocas de escarear NC sem refrigeração interna.
    • Brocas SC de aplicação específica para furação de ponto antes do ciclo completo de furação que garante o posicionamento melhorado do furo.
    • Com comprimento do canal curto, sem área ou alívio de corpo, elas são projetadas somente para ponteamento.
    • 90° para ponteamento para brocas HSS.
    • Furação: convexoFuração: convexo
    Tolerância • Métrico
    D1Tolerância h8 + / -Tolerância h6 + / -
    3–60,000/-0,0180,000/-0,008
    6–100,000/-0,0220,000/-0,009
    10–180,000/-0,0270,000/-0,011
    Tolerância • Polegada
    D1Tolerância h8 + / -Tolerância h6 + / -
    .1181 .2362.0000/-.0007.0000/-.0003
    .2362 .3937.0000/-.0009.0000/-.0004
    .3937 .7087.0000/-.0011.0000/-.0004

    Brocas de escarear sem refrigeração • Série B50_ • Classe K10 • Broca sem refrigeração e com refrigeração externa • Diâmetro da broca de 3mm–20mm • Sistema métrico

    Grupo de materialproduct data image 37346product data image 100085500
    Velocidade de corte vcMétrico
    Faixa m/minTaxa de avanço recomendada (f) por diâmetro
    Mín.Valor inicialMáx.3,04,06,08,010,012,016,020,0
    P05065100mm/r0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    1405580mm/r0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    2405580mm/r0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    3405580mm/r0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    4405580mm/r0,05–0,080,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,220,16–0,24
    5304060mm/r0,03–0,050,03–0,060,04–0,080,06–0,100,08–0,120,10–0,140,12–0,180,14–0,20
    6304060mm/r0,03–0,050,03–0,060,04–0,080,06–0,100,08–0,120,10–0,140,12–0,180,14–0,20
    M1303550mm/r0,04–0,070,05–0,090,06–0,110,80–0,130,09–0,150,10–0,170,11–0,200,12–0,23
    2304050mm/r0,03–0,050,04–0,080,05–0,090,06–0,100,07–0,120,08–0,140,09–0,170,10–0,20
    3253040mm/r0,03–0,050,04–0,080,05–0,090,06–0,100,07–0,120,08–0,140,09–0,170,10–0,20
    K16090120mm/r0,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,220,18–0,260,20–0,30
    26080100mm/r0,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,220,18–0,260,20–0,30
    36090120mm/r0,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,220,18–0,260,20–0,30
    N190230270mm/r0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    290220270mm/r0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    390180225mm/r0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    490130270mm/r0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    S1202530mm/r0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    2102030mm/r0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    3202540mm/r0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    4202550mm/r0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    Grupo de materialproduct data image 37346product data image 100085500
    Velocidade de corte — vcPolegada
    Grupo de materialVelocidade de corte vcPolegada
    Faixa SFMTaxa de avanço recomendada (f) por diâmetro
    Mín.Valor inicialMáx.1/8 .1253/16 .1881/4 .2505/16 .3133/8 .3751/2 .5005/8 .6253/4 .750
    P0160210330IPR0,002–0,0040,002–0,0050,003–0,0060,004–0,0060,005–0,0070,006–0,0080,006–0,0090,007–0,011
    1130180260IPR0,002–0,0040,002–0,0050,003–0,0060,004–0,0060,005–0,0070,006–0,0080,006–0,0090,007–0,011
    2130180260IPR0,002–0,0040,002–0,0050,003–0,0060,004–0,0060,005–0,0070,006–0,0080,006–0,0090,007–0,011
    3130180260IPR0,002–0,0040,002–0,0050,003–0,0060,004–0,0060,005–0,0070,006–0,0080,006–0,0090,007–0,011
    4130180260IPR0,002–0,0030,002–0,0040,002–0,0050,003–0,0060,004–0,0060,005–0,0070,006–0,0090,006–0,009
    5100130200IPR0,001–0,0020,001–0,0020,002–0,0030,002–0,0040,003–0,0050,004–0,0060,005–0,0070,006–0,008
    6100130200IPR0,001–0,0020,001–0,0020,002–0,0030,002–0,0040,003–0,0050,004–0,0060,005–0,0070,006–0,008
    M1100110160IPR0,002–0,0030,002–0,0040,002–0,0040,032–0,0050,004–0,0060,004–0,0070,004–0,0080,005–0,009
    2100130160IPR0,001–0,0020,002–0,0030,002–0,0040,002–0,0040,003–0,0050,003–0,0060,004–0,0070,004–0,008
    380100130IPR0,001–0,0020,002–0,0030,002–0,0040,002–0,0040,003–0,0050,003–0,0060,004–0,0070,004–0,008
    K1200300390IPR0,002–0,0050,003–0,0060,004–0,0060,005–0,0070,006–0,0080,006–0,0090,007–0,0100,008–0,012
    2200260330IPR0,002–0,0050,003–0,0060,004–0,0060,005–0,0070,006–0,0080,006–0,0090,007–0,0100,008–0,012
    3200300390IPR0,002–0,0050,003–0,0060,004–0,0060,005–0,0070,006–0,0080,006–0,0090,007–0,0100,008–0,012
    N1300750890IPR0,002–0,0050,003–0,0060,004–0,0070,005–0,0100,006–0,0110,007–0,0130,008–0,0130,009–0,015
    2300720890IPR0,002–0,0050,003–0,0060,004–0,0070,005–0,0100,006–0,0110,007–0,0130,008–0,0130,009–0,015
    3300590740IPR0,002–0,0050,003–0,0060,004–0,0070,005–0,0100,006–0,0110,007–0,0130,008–0,0130,009–0,015
    4300430890IPR0,002–0,0050,003–0,0060,004–0,0070,005–0,0100,006–0,0110,007–0,0130,008–0,0130,009–0,015
    S17080100IPR0,001–0,0020,002–0,0030,002–0,0040,002–0,0040,003–0,0040,003–0,0050,004–0,0060,004–0,008
    23070100IPR0,001–0,0020,002–0,0030,002–0,0040,002–0,0040,003–0,0040,003–0,0050,004–0,0060,004–0,008
    37080130IPR0,001–0,0020,002–0,0030,002–0,0040,002–0,0040,003–0,0040,003–0,0050,004–0,0060,004–0,008
    47080160IPR0,001–0,0020,002–0,0030,002–0,0040,002–0,0040,003–0,0040,003–0,0050,004–0,0060,004–0,008
    product data image 37346product data image 100085500
    Velocidade de corte vcMétrico
    Faixa m/minTaxa de avanço recomendada (f) por diâmetro
    Grupo de materialMín.Valor inicialMáx.3,04,06,08,010,012,016,020,0
    P05065100mm/dev0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    1405580mm/dev0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    2405580mm/dev0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    3405580mm/dev0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    4405580mm/dev0,05–0,080,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,220,16–0,24
    5304060mm/dev0,03–0,050,03–0,060,04–0,080,06–0,100,08–0,120,10–0,140,12–0,180,14–0,20
    6304060mm/dev0,03–0,050,03–0,060,04–0,080,06–0,100,08–0,120,10–0,140,12–0,180,14–0,20
    M1303550mm/dev0,04–0,070,05–0,090,06–0,110,80–0,130,09–0,150,10–0,170,11–0,200,12–0,23
    2304050mm/dev0,03–0,050,04–0,080,05–0,090,06–0,100,07–0,120,08–0,140,09–0,170,10–0,20
    3253040mm/dev0,03–0,050,04–0,080,05–0,090,06–0,100,07–0,120,08–0,140,09–0,170,10–0,20
    K16090120mm/dev0,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,220,18–0,260,20–0,30
    26080100mm/dev0,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,220,18–0,260,20–0,30
    36090120mm/dev0,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,220,18–0,260,20–0,30
    N190230270mm/dev0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    290220270mm/dev0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    390180225mm/dev0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    490130270mm/dev0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    S1202530mm/dev0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    2102030mm/dev0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    3202540mm/dev0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    4202550mm/dev0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Código de catálogo ISO Classe  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk