Porta-ferramentas ISO
Read More
Os suportes ISO com refrigeração interna direcionam o refrigerante para onde é necessário. Os bicos de refrigeração apontam o líquido de refrigeração para a zona de corte onde o cavaco está sendo formado. Isso controla e gerencia o calor de forma mais eficiente, proporcionando vida útil da ferramenta e segurança do processo máximas. Os porta-ferramentas de refrigeração interna estão disponíveis como estilos de fixação Kenlever™, Screw-On e Kenloc™.
Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- P Steel (48)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(48)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(48)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(48)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(48)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(48)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(48)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(48)
- M Stainless Steel (48)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(48)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(48)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(48)
- K Cast Iron (48)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(48)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(48)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(48)
- N Non-Ferrous Materials (48)
- N1Wrought Aluminum (48)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(48)
- N3High-Silicon Aluminum Alloys Si >12.2%(32)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (48)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (48)
- N6Carbon, Graphite Composites, CFRP (48)
- N7MMC's (40)
- S High-Temp Alloys (48)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(48)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(48)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(48)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(48)
- H Hardened Materials (48)
- H1Hardened Materials 44-48 HRC(48)
- H2Hardened Materials 48-55 HRC(48)
- H3Hardened Materials 56-60 HRC(48)
- H4Hardened Materials >60 HRC(40)
- C CFRP Materials (48)
- C1CFRP, CFRP / CFRP (48)
- C2CFRP / Aluminium CFRP / Non-Ferrous (40)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (48)
- Lightly Interrupted Cut (48)
- Smooth Cut (48)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (4)
- 93.0 (28)
- 95.0 (16)
a
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (32)
- 2.0 (32)
- 3.0 (8)
- 4.0 (24)
- 6.0 (12)
- 8.0 (12)
a
Over All Length [L]
Over All Length [L]
- 3.446 in(2)
- 3.661 in(2)
- 3.681 in(2)
- 3.74 in(2)
- 3.781 in(2)
- 3.819 in(6)
- 3.858 in(2)
- 3.918 in(2)
- 4.055 in(2)
- 4.094 in(2)
- 4.134 in(2)
- 4.154 in(2)
- 4.213 in(2)
- 4.252 in(2)
- 4.291 in(8)
- 4.331 in(2)
- 4.529 in(2)
- 4.567 in(2)
- 4.764 in(2)
a
Over All Length [L]
Over All Length [L]
- 87.5 mm(2)
- 93.0 mm(2)
- 93.5 mm(2)
- 95.0 mm(2)
- 96.0 mm(2)
- 97.0 mm(6)
- 98.0 mm(2)
- 99.5 mm(2)
- 103.0 mm(2)
- 104.0 mm(2)
- 105.0 mm(2)
- 105.5 mm(2)
- 107.0 mm(2)
- 108.0 mm(2)
- 109.0 mm(8)
- 110.0 mm(2)
- 115.0 mm(2)
- 116.0 mm(2)
- 121.0 mm(2)
a
Corner Radius
Corner Radius
- 0.0 in(8)
- 0.001 in(12)
- 0.002 in(16)
- 0.004 in(40)
- 0.008 in(40)
- 0.014 in(4)
- 0.016 in(48)
- 0.024 in(4)
- 0.031 in(48)
- 0.047 in(44)
- 0.062 in(4)
- 0.063 in(24)
- 0.095 in(8)
a
Corner Radius
Corner Radius
- 0.0 mm(8)
- 0.025 mm(12)
- 0.05 mm(16)
- 0.1 mm(40)
- 0.2 mm(40)
- 0.351 mm(4)
- 0.4 mm(48)
- 0.601 mm(4)
- 0.8 mm(48)
- 1.201 mm(44)
- 1.576 mm(4)
- 1.6 mm(24)
- 2.401 mm(8)
a
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (20)
- 241 (4)
- CL4 (16)
- CM2 (20)
- CM3 (16)
- CM4 (12)
- CPX (16)
- CW2 (12)
- GH1 (4)
- GX (8)
- HT2 (28)
- HTX (24)
- K060 (12)
- K090 (20)
- K1 (4)
- K1010P (4)
- K10M (40)
- K10P (32)
- K10U (40)
- K15U (40)
- K20K (36)
- K21 (12)
- K25M (40)
- K25P (32)
- K313 (48)
- K35P (16)
- K420 (16)
- K45 (16)
- K68 (36)
- KB1340 (12)
- KB1345 (16)
- KB1610 (32)
- KB1625 (24)
- KB1630 (16)
- KB5610 (24)
- KB5625 (28)
- KB5630 (20)
- KB9610 (36)
- KB9640 (16)
- KBH10 (40)
- KBH10B (16)
- KBH20 (40)
- KBH20B (16)
- KBK35 (4)
- KC210 (12)
- KC250 (8)
- KC5010 (48)
- KC5020P (12)
- KC5025 (48)
- KC5410 (40)
- KC5510 (32)
- KC5525 (20)
- KC710 (4)
- KC720 (36)
- KC722 (4)
- KC730 (44)
- KC7310 (32)
- KC732 (36)
- KC8050 (48)
- KC810 (44)
- KC850 (44)
- KC9010 (40)
- KC9025 (48)
- KC910 (40)
- KC9105 (48)
- KC9110 (48)
- KC9120 (36)
- KC9125 (48)
- KC9125RR (4)
- KC9140 (32)
- KC9145 (20)
- KC9210 (4)
- KC9215 (32)
- KC9225 (48)
- KC9240 (48)
- KC9240NEW (48)
- KC9245 (32)
- KC9315 (48)
- KC9320 (48)
- KC9325 (40)
- KC935 (48)
- KC950 (36)
- KC990 (40)
- KCD25 (16)
- KCK05 (48)
- KCK05B (44)
- KCK15 (44)
- KCK15B (44)
- KCK20 (48)
- KCK20B (48)
- KCM15 (48)
- KCM15B (44)
- KCM25 (48)
- KCM25B (48)
- KCM25S (8)
- KCM35 (40)
- KCM35B (32)
- KCP05 (48)
- KCP05B (40)
- KCP10 (48)
- KCP10B (48)
- KCP15 (4)
- KCP20S (8)
- KCP25 (48)
- KCP25B (48)
- KCP25C (48)
- KCP30 (48)
- KCP30B (28)
- KCP40 (20)
- KCP40B (32)
- KCPK05 (28)
- KCS10 (20)
- KCS10B (44)
- KCS25S (8)
- KCU10 (48)
- KCU10B (48)
- KCU25 (48)
- KCU25B (48)
- KD050 (24)
- KD081 (24)
- KD100 (12)
- KD120 (16)
- KD1400 (32)
- KD1405 (12)
- KD1425 (32)
- KM1 (12)
- KMF (4)
- KN10S (12)
- KS15 (4)
- KT1120 (8)
- KT125 (24)
- KT150 (16)
- KT175 (36)
- KT315 (48)
- KT325 (32)
- KT5020 (8)
- KTP10 (48)
- KTP25S (36)
- KU10 (16)
- KU10T (48)
- KU30T (48)
- KY1310 (16)
- KY1320 (24)
- KY1540 (8)
- KY1615 (20)
- KY2000 (12)
- KY2100 (8)
- KY3000 (20)
- KY3400 (16)
- KY3500 (24)
- KY4000 (12)
- KY4300 (4)
- KY4400 (24)
- KYHK15B (24)
- KYK10 (16)
- KYK25 (16)
- KYK35 (24)
- KYS25 (8)
- KYS30 (12)
- NL200 (8)
- NL250 (28)
- NL300 (16)
- NL400 (8)
- NL920 (24)
- P25 (8)
- PS5 (12)
- SP0819 (16)
- SP3019 (16)
- SP4019 (16)
- SP4036 (4)
- SP4093 (4)
- SP61EJ (4)
- TN7035 (4)
- X00511 (4)
- X00580 (4)
- X00581 (4)
- X00582 (4)
- X00583 (4)
- X00584 (4)
- X00585 (4)
- X00586 (4)
- X00591 (4)
- X00592 (4)
- X00593 (4)
- X00594 (4)
- X00596 (4)
- X00597 (4)
- X00599 (4)
Hand Of Tool
Hand Of Tool
- L (24)
- R (24)
Wiper Insert
Wiper Insert
- N (48)
- Y (32)
F Dimension
F Dimension
- 25.0 mm(22)
- 32.0 mm(26)
a
F Dimension
F Dimension
- 0.984 in(22)
- 1.26 in(26)
a
Cutting Direction
Cutting Direction
- B (20)
- S (28)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (28)
- NEGATIVE-ZERO (4)
- NEUTRAL (ZERO) (16)
frontEnd
Clamp Style
Clamp Style
- M (8)
- P (24)
- S (16)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (8)
- D-DIAMOND/RHOMBIC 55 (12)
- S-SQUARE 90 (4)
- T-TRIANGLE 60 (4)
- V-DIAMOND/RHOMBIC 35 (12)
- W-TRIGON 80 (8)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (36)
- B L (40)
- C A (24)
- C N (24)
- D P (36)
- H T (48)
- H W (48)
backEnd
Shank Height
Shank Height
- 0.787 in(24)
- 0.984 in(24)
a
Shank Height
Shank Height
- 20.0 mm(24)
- 25.0 mm(24)
a
Shank Width
Shank Width
- 0.787 in(22)
- 0.984 in(26)
a
Shank Width
Shank Width
- 20.0 mm(22)
- 25.0 mm(26)
a
No filters matching ""
