Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

Porta-ferramentas

Selecionar filtros
Filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (287)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(287)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(287)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(287)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(287)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(287)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(287)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(287)
    • M Stainless Steel (287)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(287)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(287)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(287)
    • K Cast Iron (287)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(287)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(287)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(287)
    • N Non-Ferrous Materials (287)
      • N1
        Wrought Aluminum (287)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(287)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(128)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (287)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (287)
      • N6
        Carbon, Graphite Composites, CFRP (287)
      • N7
        MMC's (128)
    • S High-Temp Alloys (287)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(287)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(287)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(287)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(287)
    • H Hardened Materials (278)
      • H1
        Hardened Materials 44-48 HRC(278)
      • H2
        Hardened Materials 48-55 HRC(278)
      • H3
        Hardened Materials 56-60 HRC(167)
      • H4
        Hardened Materials >60 HRC(167)
    Selecione First Choice
    • BR (8)
    • CN (60)
    • DE (60)
    • GB (29)
    • IN (2)
    • SG (14)
    • US (98)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (69)
    • Cut-OffCut-Off (92)
    • Deep GroovingDeep Grooving (69)
    • Face GroovingFace Grooving (98)
    • FacingFacing (69)
    • GroovingGrooving (199)
    • Multiple Direction CuttingMultiple Direction Cutting (276)
    • ProfilingProfiling (199)
    • TurningTurning (199)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (287)
    • Lightly Interrupted Cut (287)
    • Smooth Cut (287)
    • Varying Depth of Cut (287)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (262)
    • 92.25 (25)
    Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (11)
    • Toolholder (157)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (129)
    • 2.0 (220)
    Cutting Edges Per Insert MinaCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.077 in(23)
    • 2.156 in(24)
    • 2.269 in(12)
    • 2.352 in(8)
    • 4.5 in(23)
    • 4.921 in(57)
    • 4.933 in(12)
    • 5.0 in(20)
    • 5.906 in(36)
    • 5.917 in(4)
    • 6.0 in(46)
    • 6.694 in(10)
    • 7.0 in(1)
    • 7.931 in(7)
    • 8.012 in(4)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 52.75 mm(23)
    • 54.75 mm(24)
    • 57.625 mm(12)
    • 59.75 mm(8)
    • 114.301 mm(23)
    • 125.0 mm(57)
    • 125.301 mm(12)
    • 127.0 mm(20)
    • 150.0 mm(36)
    • 150.3 mm(4)
    • 152.4 mm(46)
    • 170.0 mm(10)
    • 177.8 mm(1)
    • 201.451 mm(7)
    • 203.5 mm(4)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.006 in(9)
    • 0.008 in(178)
    • 0.016 in(205)
    • 0.031 in(140)
    • 0.034 in(40)
    • 0.039 in(73)
    • 0.041 in(56)
    • 0.047 in(62)
    • 0.048 in(17)
    • 0.06 in(65)
    • 0.063 in(53)
    • 0.079 in(42)
    • 0.08 in(40)
    • 0.094 in(40)
    • 0.098 in(36)
    • 0.099 in(35)
    • 0.119 in(39)
    • 0.12 in(39)
    • 0.125 in(39)
    • 0.156 in(17)
    • 0.157 in(17)
    • 0.158 in(17)
    • 0.187 in(6)
    • 0.188 in(6)
    • 0.197 in(6)
    • 0.198 in(6)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.151 mm(9)
    • 0.2 mm(178)
    • 0.4 mm(205)
    • 0.8 mm(140)
    • 0.851 mm(40)
    • 1.0 mm(73)
    • 1.05 mm(56)
    • 1.201 mm(62)
    • 1.225 mm(17)
    • 1.5 mm(65)
    • 1.526 mm(53)
    • 1.6 mm(53)
    • 2.0 mm(42)
    • 2.025 mm(40)
    • 2.375 mm(40)
    • 2.5 mm(36)
    • 2.526 mm(35)
    • 3.0 mm(39)
    • 3.026 mm(39)
    • 3.176 mm(39)
    • 3.975 mm(17)
    • 4.0 mm(17)
    • 4.025 mm(17)
    • 4.75 mm(6)
    • 4.775 mm(6)
    • 5.0 mm(6)
    • 5.025 mm(6)
    Corner Radius MinaCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(67)
    Corner Chamfer MinaCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(67)
    Corner Chamfer MinaCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K1025 (96)
    • K313 (246)
    • KB1630 (167)
    • KB5625 (167)
    • KBH20 (167)
    • KC5010 (246)
    • KC5025 (255)
    • KC9110 (246)
    • KC9125 (246)
    • KCK20 (190)
    • KCP10 (246)
    • KCP25 (246)
    • KCU10 (278)
    • KCU10B (278)
    • KCU25 (287)
    • KCU25B (287)
    • KD1405 (128)
    • KMS (88)
    • KT315 (223)
    • KU10 (246)
    • KU30T (167)
    • KY3500 (190)
    • KYS30 (91)
    • SP88F8 (39)
    Hand Of Tool
    Hand Of Tool
    • L (94)
    • N (10)
    • R (116)
    Wiper Insert
    Wiper Insert
    • N (220)
    F Dimension
    F Dimension
    • 8.175 mm(1)
    • 8.225 mm(2)
    • 9.75 mm(1)
    • 10.226 mm(1)
    • 10.25 mm(1)
    • 12.101 mm(2)
    • 12.175 mm(2)
    • 12.226 mm(1)
    • 12.726 mm(3)
    • 12.75 mm(2)
    • 12.8 mm(2)
    • 12.851 mm(2)
    • 13.025 mm(2)
    • 15.925 mm(1)
    • 15.976 mm(4)
    • 16.026 mm(1)
    • 16.1 mm(1)
    • 16.2 mm(5)
    • 16.225 mm(2)
    • 19.026 mm(1)
    • 19.075 mm(8)
    • 19.1 mm(1)
    • 19.125 mm(6)
    • 19.225 mm(3)
    • 19.25 mm(2)
    • 20.05 mm(6)
    • 20.1 mm(16)
    • 20.201 mm(22)
    • 20.3 mm(2)
    • 25.05 mm(4)
    • 25.1 mm(8)
    • 25.201 mm(10)
    • 25.3 mm(2)
    • 25.326 mm(2)
    • 25.401 mm(1)
    • 25.425 mm(4)
    • 25.475 mm(7)
    • 25.5 mm(1)
    • 25.576 mm(4)
    • 25.701 mm(3)
    • 27.901 mm(1)
    • 30.401 mm(1)
    • 30.8 mm(1)
    • 33.1 mm(1)
    • 35.1 mm(1)
    • 35.4 mm(1)
    • 38.901 mm(1)
    • 39.1 mm(2)
    F Dimension MinaF Dimension Max
    F Dimension
    F Dimension
    • 0.322 in(1)
    • 0.324 in(2)
    • 0.384 in(1)
    • 0.403 in(1)
    • 0.404 in(1)
    • 0.477 in(2)
    • 0.48 in(2)
    • 0.481 in(1)
    • 0.501 in(3)
    • 0.502 in(2)
    • 0.504 in(2)
    • 0.506 in(2)
    • 0.513 in(2)
    • 0.627 in(1)
    • 0.629 in(4)
    • 0.631 in(1)
    • 0.634 in(1)
    • 0.638 in(5)
    • 0.639 in(2)
    • 0.749 in(1)
    • 0.751 in(8)
    • 0.752 in(1)
    • 0.753 in(6)
    • 0.757 in(3)
    • 0.758 in(2)
    • 0.789 in(6)
    • 0.791 in(16)
    • 0.795 in(22)
    • 0.799 in(2)
    • 0.986 in(4)
    • 0.988 in(8)
    • 0.992 in(10)
    • 0.996 in(2)
    • 0.997 in(2)
    • 1.0 in(1)
    • 1.002 in(4)
    • 1.004 in(8)
    • 1.008 in(4)
    • 1.012 in(3)
    • 1.098 in(1)
    • 1.197 in(1)
    • 1.213 in(1)
    • 1.303 in(1)
    • 1.383 in(1)
    • 1.395 in(1)
    • 1.532 in(1)
    • 1.539 in(2)
    F Dimension MinaF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 16.0 mm(4)
    • 17.0 mm(3)
    • 20.0 mm(6)
    • 21.0 mm(3)
    • 25.0 mm(10)
    • 26.0 mm(5)
    • 36.0 mm(3)
    • 38.0 mm(1)
    • 42.0 mm(4)
    • 48.0 mm(2)
    • 50.0 mm(2)
    • 52.0 mm(2)
    • 58.0 mm(2)
    • 60.0 mm(2)
    • 64.0 mm(2)
    • 68.0 mm(2)
    • 70.0 mm(5)
    • 80.0 mm(4)
    • 90.0 mm(6)
    • 92.0 mm(2)
    • 100.0 mm(2)
    • 120.0 mm(9)
    • 130.0 mm(2)
    • 132.0 mm(2)
    • 184.0 mm(2)
    • 200.0 mm(4)
    • 250.0 mm(3)
    • 290.0 mm(4)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.63 in(4)
    • 0.669 in(3)
    • 0.787 in(6)
    • 0.828 in(3)
    • 0.984 in(10)
    • 1.024 in(5)
    • 1.417 in(3)
    • 1.496 in(1)
    • 1.655 in(4)
    • 1.891 in(2)
    • 1.969 in(2)
    • 2.047 in(2)
    • 2.283 in(2)
    • 2.362 in(2)
    • 2.52 in(2)
    • 2.677 in(2)
    • 2.757 in(5)
    • 3.15 in(4)
    • 3.543 in(6)
    • 3.622 in(2)
    • 3.938 in(2)
    • 4.724 in(9)
    • 5.118 in(2)
    • 5.197 in(2)
    • 7.244 in(2)
    • 7.875 in(4)
    • 9.843 in(3)
    • 11.417 in(4)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.787 in(4)
    • 0.828 in(3)
    • 0.906 in(1)
    • 0.984 in(6)
    • 1.024 in(2)
    • 1.063 in(9)
    • 1.102 in(7)
    • 1.339 in(7)
    • 1.379 in(2)
    • 1.417 in(13)
    • 1.811 in(1)
    • 1.891 in(2)
    • 2.126 in(2)
    • 2.283 in(3)
    • 2.52 in(2)
    • 2.835 in(2)
    • 2.914 in(2)
    • 3.307 in(2)
    • 3.701 in(2)
    • 3.938 in(4)
    • 4.409 in(2)
    • 4.882 in(2)
    • 5.354 in(2)
    • 5.906 in(2)
    • 6.299 in(2)
    • 7.875 in(2)
    • 8.346 in(2)
    • 10.0 in(2)
    • 11.811 in(6)
    • 39.331 in(6)
    Maximum Axial Groove Diameter MinaMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 20.0 mm(4)
    • 21.0 mm(3)
    • 23.0 mm(1)
    • 25.0 mm(6)
    • 26.0 mm(2)
    • 27.0 mm(9)
    • 28.0 mm(7)
    • 34.0 mm(7)
    • 35.0 mm(2)
    • 36.0 mm(13)
    • 46.0 mm(1)
    • 48.0 mm(2)
    • 54.0 mm(2)
    • 58.0 mm(3)
    • 64.0 mm(2)
    • 72.0 mm(2)
    • 74.0 mm(2)
    • 84.0 mm(2)
    • 94.0 mm(2)
    • 100.0 mm(4)
    • 112.0 mm(2)
    • 124.0 mm(2)
    • 136.0 mm(2)
    • 150.0 mm(2)
    • 160.0 mm(2)
    • 200.0 mm(2)
    • 212.0 mm(2)
    • 254.0 mm(2)
    • 300.0 mm(6)
    • 999.0 mm(6)
    Maximum Axial Groove Diameter MinaMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (210)
    • S (10)
    Rake Angle Style
    Rake Angle Style
    • NEUTRAL (ZERO) (28)
    • POSITIVE-ZERO (146)
    Maximum Bore Depth
    Maximum Bore Depth
    • 2.5 in(1)
    • 2.52 in(2)
    • 3.0 in(1)
    • 3.15 in(2)
    • 3.938 in(3)
    • 4.0 in(2)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 63.5 mm(1)
    • 64.0 mm(2)
    • 76.2 mm(1)
    • 80.0 mm(2)
    • 100.0 mm(3)
    • 101.601 mm(2)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (11)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.06 in(9)
    • 0.079 in(73)
    • 0.084 in(73)
    • 0.119 in(65)
    • 0.12 in(53)
    • 0.122 in(53)
    • 0.123 in(65)
    • 0.125 in(53)
    • 0.13 in(53)
    • 0.157 in(42)
    • 0.161 in(40)
    • 0.162 in(42)
    • 0.187 in(40)
    • 0.193 in(40)
    • 0.197 in(36)
    • 0.199 in(35)
    • 0.201 in(35)
    • 0.202 in(36)
    • 0.237 in(39)
    • 0.239 in(39)
    • 0.241 in(39)
    • 0.25 in(39)
    • 0.256 in(39)
    • 0.312 in(17)
    • 0.313 in(17)
    • 0.315 in(17)
    • 0.317 in(17)
    • 0.319 in(17)
    • 0.32 in(17)
    • 0.375 in(6)
    • 0.382 in(6)
    • 0.394 in(6)
    • 0.396 in(6)
    • 0.399 in(6)
    Cutting Width MinaCutting Width Max
    Cutting Width
    Cutting Width
    • 1.5 mm(9)
    • 2.0 mm(73)
    • 2.125 mm(73)
    • 3.0 mm(65)
    • 3.051 mm(53)
    • 3.1 mm(53)
    • 3.125 mm(65)
    • 3.176 mm(53)
    • 3.301 mm(53)
    • 4.0 mm(42)
    • 4.101 mm(40)
    • 4.125 mm(42)
    • 4.75 mm(40)
    • 4.9 mm(40)
    • 5.0 mm(36)
    • 5.051 mm(35)
    • 5.101 mm(35)
    • 5.125 mm(36)
    • 6.0 mm(39)
    • 6.051 mm(39)
    • 6.125 mm(39)
    • 6.351 mm(39)
    • 6.5 mm(39)
    • 7.926 mm(17)
    • 7.95 mm(17)
    • 8.0 mm(17)
    • 8.05 mm(17)
    • 8.1 mm(17)
    • 8.125 mm(17)
    • 9.525 mm(6)
    • 9.701 mm(6)
    • 10.0 mm(6)
    • 10.05 mm(6)
    • 10.125 mm(6)
    Cutting Width MinaCutting Width Max
    Cartridge Size
    Cartridge Size
    • 50 (55)
    • 65 (12)
    Insert Size
    Insert Size
    • 10 (4)
    • 2 (36)
    • 2S (11)
    • 3 (33)
    • 3S (8)
    • 4 (30)
    • 4S (1)
    • 5 (27)
    • 5S (1)
    • 6 (32)
    • 8 (14)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 in(29)
    • 0.197 in(3)
    • 0.276 in(2)
    • 0.315 in(10)
    • 0.354 in(1)
    • 0.394 in(6)
    • 0.433 in(4)
    • 0.473 in(29)
    • 0.531 in(9)
    • 0.551 in(73)
    • 0.572 in(4)
    • 0.669 in(41)
    • 0.69 in(3)
    • 0.748 in(15)
    • 0.787 in(22)
    • 0.866 in(4)
    • 0.946 in(20)
    • 1.024 in(12)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 mm(29)
    • 5.0 mm(3)
    • 7.0 mm(2)
    • 8.0 mm(10)
    • 9.0 mm(1)
    • 10.0 mm(6)
    • 11.0 mm(4)
    • 12.0 mm(29)
    • 13.5 mm(9)
    • 14.0 mm(73)
    • 14.5 mm(4)
    • 17.0 mm(41)
    • 17.5 mm(3)
    • 19.0 mm(15)
    • 20.0 mm(22)
    • 22.0 mm(4)
    • 24.0 mm(20)
    • 26.0 mm(12)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 2.757 in(3)
    • 3.543 in(2)
    • 4.724 in(5)
    Minimum Groove Diameter MinaMinimum Groove Diameter Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 70.0 mm(3)
    • 90.0 mm(2)
    • 120.0 mm(5)
    Minimum Groove Diameter MinaMinimum Groove Diameter Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (167)
    • B L (167)
    • C N (190)
    • D P (128)
    • H T (223)
    • H W (287)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (11)
    • SQUARE SHANK (209)
    Back-End Diameter
    Back-End Diameter
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 19.05 mm(1)
    • 20.0 mm(2)
    • 25.0 mm(3)
    • 25.401 mm(2)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.625 in(1)
    • 0.63 in(2)
    • 0.75 in(1)
    • 0.787 in(2)
    • 0.984 in(3)
    • 1.0 in(2)
    Back-End Diameter MinaBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.473 in(5)
    • 0.5 in(6)
    • 0.625 in(9)
    • 0.63 in(9)
    • 0.75 in(29)
    • 0.787 in(55)
    • 0.984 in(40)
    • 1.0 in(36)
    • 1.25 in(9)
    • 1.26 in(10)
    • 1.5 in(1)
    Shank Height MinaShank Height Max
    Shank Height
    Shank Height
    • 12.0 mm(5)
    • 12.701 mm(6)
    • 15.875 mm(9)
    • 16.0 mm(9)
    • 19.05 mm(29)
    • 20.0 mm(55)
    • 25.0 mm(40)
    • 25.401 mm(36)
    • 31.75 mm(9)
    • 32.0 mm(10)
    • 38.1 mm(1)
    Shank Height MinaShank Height Max
    Shank Width
    Shank Width
    • 0.473 in(5)
    • 0.5 in(6)
    • 0.625 in(9)
    • 0.63 in(10)
    • 0.742 in(1)
    • 0.75 in(28)
    • 0.787 in(54)
    • 0.984 in(50)
    • 1.0 in(36)
    • 1.25 in(9)
    • 1.5 in(1)
    Shank Width MinaShank Width Max
    Shank Width
    Shank Width
    • 12.0 mm(5)
    • 12.701 mm(6)
    • 15.875 mm(9)
    • 16.0 mm(10)
    • 18.85 mm(1)
    • 19.05 mm(28)
    • 20.0 mm(54)
    • 25.0 mm(50)
    • 25.401 mm(36)
    • 31.75 mm(9)
    • 38.1 mm(1)
    Shank Width MinaShank Width Max
    No filters matching ""
    Porta-ferramentas com projeção curta A4SM Métrico
    (9)

    Porta-ferramentas com projeção curta A4SM Métrico

    A4SM
    (45)

    A4SM

    A4SC
    (12)

    A4SC

    A4SM
    (41)

    A4SM

    Curvatura para fora A4M-B (Ferramenta integral para abertura de canal de face em diâmetro pequeno) Métrico
    (67)

    Curvatura para fora A4M-B (Ferramenta integral para abertura de canal de face em diâmetro pequeno) Métrico

    A4 • Integral Toolholder • Through Coolant • Metric
    (39)

    A4 • Integral Toolholder • Through Coolant • Metric

    A4SC
    (11)

    A4SC

    Ferramenta integral para abertura de canal de face em diâmetro pequeno A4SS
    (7)

    Ferramenta integral para abertura de canal de face em diâmetro pequeno A4SS

    A4EN
    (7)

    A4EN

    A4SB Suporte inteiriço para abertura de canais de face com pequeno diâmetro
    (3)

    A4SB Suporte inteiriço para abertura de canais de face com pequeno diâmetro

    A4SS Suporte inteiriço para abertura de canais de face com pequeno diâmetro
    (4)

    A4SS Suporte inteiriço para abertura de canais de face com pequeno diâmetro

    A4 • Integral Toolholder • Through Coolant • Inch
    (30)

    A4 • Integral Toolholder • Through Coolant • Inch

    Ferramenta integral para abertura de canal de face em diâmetro pequeno A4SB
    (7)

    Ferramenta integral para abertura de canal de face em diâmetro pequeno A4SB

    A4SM Porta-ferramentas com projeção curta Polegada
    (2)

    A4SM Porta-ferramentas com projeção curta Polegada

    A4EN
    (3)

    A4EN

    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Código de catálogo ISO Classe  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk