Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

Beyond Evolution Boring Bars

Selecionar filtros
Filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (52)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(52)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(52)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(52)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(52)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(52)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(52)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(52)
    • M Stainless Steel (52)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(52)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(52)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(52)
    • K Cast Iron (52)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(52)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(52)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(52)
    • N Non-Ferrous Materials (52)
      • N1
        Wrought Aluminum (52)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(52)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (52)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (52)
      • N6
        Carbon, Graphite Composites, CFRP (52)
    • S High-Temp Alloys (52)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(52)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(52)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(52)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(52)
    • H Hardened Materials (52)
      • H1
        Hardened Materials 44-48 HRC(52)
      • H2
        Hardened Materials 48-55 HRC(52)
    Applications
    Applications
    • GroovingGrooving (52)
    • ID GroovingID Grooving (52)
    • Plunge TurningPlunge Turning (40)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (52)
    • Lightly Interrupted Cut (52)
    • Smooth Cut (52)
    • Varying Depth of Cut (52)
    Over All Length [L]
    Over All Length [L]
    • 4.921 in(8)
    • 5.906 in(12)
    • 7.087 in(12)
    • 7.875 in(12)
    • 9.843 in(8)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 125.0 mm(8)
    • 150.0 mm(12)
    • 180.0 mm(12)
    • 200.0 mm(12)
    • 250.0 mm(8)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(52)
    • 0.016 in(24)
    • 0.031 in(8)
    • 0.039 in(16)
    • 0.041 in(16)
    • 0.047 in(16)
    • 0.06 in(16)
    • 0.061 in(16)
    • 0.063 in(16)
    • 0.065 in(16)
    • 0.079 in(8)
    • 0.081 in(8)
    • 0.094 in(8)
    • 0.096 in(8)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(52)
    • 0.4 mm(24)
    • 0.8 mm(8)
    • 1.0 mm(16)
    • 1.05 mm(16)
    • 1.201 mm(16)
    • 1.5 mm(16)
    • 1.55 mm(16)
    • 1.6 mm(16)
    • 1.651 mm(16)
    • 2.0 mm(8)
    • 2.051 mm(8)
    • 2.375 mm(8)
    • 2.45 mm(8)
    Corner Radius MinaCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (52)
    • KCK20B (52)
    • KCM35B (40)
    • KCP10B (52)
    • KCP25B (52)
    • KCS10B (40)
    • KCU10 (52)
    • KCU10B (52)
    • KCU25 (52)
    • KCU25B (52)
    Hand Of Tool
    Hand Of Tool
    • L (26)
    • R (26)
    F Dimension
    F Dimension
    • 8.525 mm(4)
    • 9.0 mm(4)
    • 11.0 mm(5)
    • 11.05 mm(7)
    • 13.0 mm(6)
    • 13.951 mm(2)
    • 13.976 mm(4)
    • 17.0 mm(4)
    • 17.3 mm(6)
    • 17.5 mm(2)
    • 21.125 mm(4)
    • 22.0 mm(4)
    F Dimension MinaF Dimension Max
    F Dimension
    F Dimension
    • 0.336 in(4)
    • 0.354 in(4)
    • 0.433 in(5)
    • 0.435 in(7)
    • 0.512 in(6)
    • 0.549 in(2)
    • 0.55 in(4)
    • 0.669 in(4)
    • 0.681 in(6)
    • 0.69 in(2)
    • 0.833 in(4)
    • 0.866 in(4)
    F Dimension MinaF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 15.875 mm(4)
    • 16.0 mm(4)
    • 20.0 mm(12)
    • 25.0 mm(10)
    • 25.401 mm(2)
    • 31.75 mm(6)
    • 32.0 mm(6)
    • 38.1 mm(4)
    • 40.0 mm(4)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.625 in(4)
    • 0.63 in(4)
    • 0.787 in(12)
    • 0.984 in(10)
    • 1.0 in(2)
    • 1.25 in(6)
    • 1.26 in(6)
    • 1.5 in(4)
    • 1.575 in(4)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (21)
    • S (31)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (34)
    • NEUTRAL (ZERO) (18)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.946 in(4)
    • 1.0 in(4)
    • 1.25 in(6)
    • 1.26 in(4)
    • 1.5 in(6)
    • 1.575 in(4)
    • 1.586 in(2)
    • 1.587 in(2)
    • 1.969 in(2)
    • 1.98 in(4)
    • 2.0 in(7)
    • 2.496 in(2)
    • 2.5 in(1)
    • 2.52 in(4)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 24.0 mm(4)
    • 25.401 mm(4)
    • 31.75 mm(6)
    • 32.0 mm(4)
    • 38.1 mm(6)
    • 40.0 mm(4)
    • 40.276 mm(2)
    • 40.301 mm(2)
    • 50.0 mm(2)
    • 50.301 mm(4)
    • 50.801 mm(7)
    • 63.401 mm(2)
    • 63.5 mm(1)
    • 64.0 mm(4)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    frontEnd
    Cutting Width
    Cutting Width
    • 0.063 in(12)
    • 0.079 in(16)
    • 0.084 in(16)
    • 0.094 in(16)
    • 0.095 in(16)
    • 0.098 in(16)
    • 0.119 in(16)
    • 0.123 in(16)
    • 0.125 in(16)
    • 0.13 in(16)
    • 0.157 in(8)
    • 0.161 in(16)
    • 0.162 in(8)
    • 0.187 in(8)
    • 0.188 in(8)
    • 0.192 in(8)
    Cutting Width MinaCutting Width Max
    Cutting Width
    Cutting Width
    • 1.6 mm(12)
    • 2.0 mm(16)
    • 2.125 mm(16)
    • 2.375 mm(16)
    • 2.401 mm(16)
    • 2.5 mm(16)
    • 3.0 mm(16)
    • 3.125 mm(16)
    • 3.176 mm(16)
    • 3.301 mm(16)
    • 4.0 mm(8)
    • 4.101 mm(16)
    • 4.125 mm(8)
    • 4.75 mm(8)
    • 4.775 mm(8)
    • 4.875 mm(8)
    Cutting Width MinaCutting Width Max
    Insert Size
    Insert Size
    • 1F (12)
    • 2 (16)
    • 3 (16)
    • 4 (8)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.197 in(8)
    • 0.276 in(24)
    • 0.394 in(12)
    • 0.473 in(8)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 5.0 mm(8)
    • 7.0 mm(24)
    • 10.0 mm(12)
    • 12.0 mm(8)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B L (40)
    • H W (52)
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(4)
    • 12.701 mm(4)
    • 15.875 mm(6)
    • 16.0 mm(6)
    • 19.05 mm(6)
    • 20.0 mm(6)
    • 25.0 mm(6)
    • 25.401 mm(6)
    • 31.701 mm(1)
    • 31.75 mm(3)
    • 32.0 mm(4)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.473 in(4)
    • 0.5 in(4)
    • 0.625 in(6)
    • 0.63 in(6)
    • 0.75 in(6)
    • 0.787 in(6)
    • 0.984 in(6)
    • 1.0 in(6)
    • 1.248 in(1)
    • 1.25 in(3)
    • 1.26 in(4)
    Back-End Diameter MinaBack-End Diameter Max
    No filters matching ""
    Beyond™ Evolution™ • Integral Boring Bar • Through Coolant • Inch
    (26)

    Beyond™ Evolution™ • Integral Boring Bar • Through Coolant • Inch

    Beyond<StartNumerator/>™ Evolution™ • Barra de mandrilar integral • <br />Refrigeração através da ferramenta
    (26)

    Beyond™ Evolution™ • Barra de mandrilar integral •
    Refrigeração através da ferramenta

    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberCódigo de catálogo ISOClasse  

    You are about to leave the Solution building process.

    Are you sure you want to leave?