+0
Downloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 3583786 |
| ID do catálogo ISO | SDMT120408EGG |
| ID do catálogo ANSI | SDMT120408EGG |
| Grade | KC730M |
| [D] Insert IC Size | 12.7 mm |
| [D] Insert IC Size | .5 in |
| [S] Insert Thickness | 4.76 mm |
| [S] Insert Thickness | .1875 in |
| [L10] Insert Cutting Edge Length | 12.7 mm |
| [L10] Insert Cutting Edge Length | .5 in |
| [Rε] Corner Radius | 0.8 mm |
| [Rε] Corner Radius | .0313 in |
| Average Chip Thickness [HM] | 0.06 mm |
| Average Chip Thickness [HM] | .0024 in |
| Cutting Edges per Insert | 4 |
Classes
KC730M
Coated carbide with PVD-TiN. KC730M has a tough substrate and is recommended for general milling with moderate speeds. Grade can be used dry and wet.
Criar solução para calcular avanços e velocidade
Após criar uma solução basta escolher o ícone Avanços & Velocidades e o nosso sistema irá fornecer recomendações. Pode personalizar as informações adicionando a sua máquina e especificações ou fazer ajustes utilizando os controlos deslizantes.
| Geometria do Inserto | Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae) | Geometria do Inserto | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .06..EGG | 0,20 | 0,46 | 0,70 | 0,14 | 0,33 | 0,50 | 0,11 | 0,25 | 0,38 | 0,09 | 0,22 | 0,33 | 0,08 | 0,20 | 0,30 | .06..EGG |
| .08..EGG | 0,20 | 0,53 | 0,82 | 0,14 | 0,38 | 0,59 | 0,11 | 0,29 | 0,44 | 0,09 | 0,25 | 0,39 | 0,08 | 0,23 | 0,35 | .08..EGG |
| .12..EGG | 0,20 | 0,59 | 0,92 | 0,14 | 0,43 | 0,66 | 0,11 | 0,32 | 0,50 | 0,09 | 0,28 | 0,43 | 0,08 | 0,25 | 0,40 | .12..EGG |
| Usinagem leve | Usinagem geral | Usinagem pesada |
| Geometria do Inserto | Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae) | Geometria do Inserto | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .06..EGG | 0.20 | 0.46 | 0.70 | 0.14 | 0.33 | 0.50 | 0.11 | 0.25 | 0.38 | 0.09 | 0.22 | 0.33 | 0.08 | 0.20 | 0.30 | .06..EGG |
| .08..EGG | 0.20 | 0.53 | 0.82 | 0.14 | 0.38 | 0.59 | 0.11 | 0.29 | 0.44 | 0.09 | 0.25 | 0.39 | 0.08 | 0.23 | 0.35 | .08..EGG |
| .12..EGG | 0.20 | 0.59 | 0.92 | 0.14 | 0.43 | 0.66 | 0.11 | 0.32 | 0.50 | 0.09 | 0.28 | 0.43 | 0.08 | 0.25 | 0.40 | .12..EGG |
| Usinagem leve | Usinagem geral | Usinagem pesada |
| Grupo de material | KC110M | KC505M | KC730M | KC735M | |||||||||
| P | 1 | – | – | – | – | – | – | 130 | 120 | 100 | 160 | 140 | 130 |
| 2 | – | – | – | – | – | – | 120 | 110 | 105 | 140 | 130 | 120 | |
| 3 | – | – | – | – | – | – | 110 | 100 | 90 | 130 | 120 | 110 | |
| 4 | – | – | – | – | – | – | 100 | 90 | 80 | 120 | 110 | 100 | |
| 5 | – | – | – | – | – | – | 90 | 80 | 75 | 110 | 90 | 80 | |
| 6 | – | – | – | – | – | – | 80 | 75 | 70 | 90 | 80 | 70 | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| K | 1 | 130 | 120 | 115 | 150 | 140 | 120 | – | – | – | – | – | – |
| 2 | 115 | 105 | 100 | 140 | 120 | 105 | – | – | – | – | – | – | |
| 3 | 100 | 90 | 80 | 105 | 95 | 80 | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| Grupo de material | KC110M | KC505M | KC730M | KC735M | |||||||||
| P | 1 | – | – | – | – | – | – | 420 | 400 | 330 | 490 | 460 | 430 |
| 2 | – | – | – | – | – | – | 400 | 360 | 340 | 460 | 430 | 390 | |
| 3 | – | – | – | – | – | – | 360 | 330 | 300 | 430 | 390 | 360 | |
| 4 | – | – | – | – | – | – | 330 | 300 | 270 | 390 | 360 | 330 | |
| 5 | – | – | – | – | – | – | 300 | 270 | 250 | 360 | 290 | 260 | |
| 6 | – | – | – | – | – | – | 270 | 250 | 235 | 290 | 260 | 230 | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| K | 1 | 425 | 400 | 375 | 490 | 460 | 390 | – | – | – | – | – | – |
| 2 | 375 | 350 | 325 | 460 | 390 | 340 | – | – | – | – | – | – | |
| 3 | 330 | 295 | 260 | 340 | 310 | 260 | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| Grupo de material | Usinagem leve | Usinagem geral | Usinagem pesada | |||
| – | (Geometria leve) | – | (Geometria reforçada) | |||
| – | resistência ao desgaste |  | tenacidade | |||
| – | Geometria | Classe | Geometria | Classe | Geometria | Classe |
| P1–P2 | ..EGG | KC735M | ..EGG | KC735M | ..EGG | KC735M |
| P3–P4 | ..EGG | KC735M | ..EGG | KC735M | ..EGG | KC735M |
| P5–P6 | ..EGG | KC735M | ..EGG | KC735M | ..EGG | KC735M |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | ..EGG | KC505M | ..EGG | KC505M | ..EGG | KC505M |
| K3 | ..EGG | KC505M | ..EGG | KC505M | ..EGG | KC505M |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | – | – | – | – | – | – |
| tipo de material | código do produto | condições de corte vc (m/min) | n (RPM) | avanço por faca (mm) | |
| P | KTMS21S25SD06H | 120 | 1820 | 0,10 | |
| KTMS25S25SD06H | 120 | 1530 | 0,10 | ||
| KTMS32S32SD08H | 120 | 1190 | 0,10 | ||
| KTMS40S32SD12H | 120 | 960 | 0,10 | ||
| KTMS50S32SD12H | 120 | 760 | 0,10 | ||
| K | KTMS21S25SD06H | 150 | 2270 | 0,12 | |
| KTMS25S25SD06H | 150 | 1910 | 0,12 | ||
| KTMS32S32SD08H | 150 | 1490 | 0,12 | ||
| KTMS40S32SD12H | 150 | 1190 | 0,15 | ||
| KTMS50S32SD12H | 150 | 960 | 0,15 |
| tipo de material | código do produto | condições de corte vc (m/min) | avanço por faca (mm) | Vs* | |
| P | KTMS21S25SD06H | 120 | 0,10 | Figura 1 | |
| KTMS25S25SD06H | 120 | 0,10 | Figura 1 | ||
| KTMS32S32SD08H | 100 | 0,10 | Figura 1 | ||
| KTMS40S32SD12H | 80 | 0,15 | Figura 2 | ||
| KTMS50S32SD12H | não recomendado devido à trepidação frequente | ||||
| K | KTMS21S25SD06H | 120 | 0,12 | Figuras 1, 2, 3 | |
| KTMS25S25SD06H | 120 | 0,12 | Figuras 1, 2, 3 | ||
| KTMS32S32SD08H | 120 | 0,12 | Figuras 1, 2, 3 | ||
| KTMS40S32SD12H | 120 | 0,15 | Figuras 2, 3 | ||
| KTMS50S32SD12H | 120 | 0,15 | Figura 3 | ||
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Código de catálogo ISO
Número do catálogo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Código de catálogo ISO | Classe |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?