Drilling
Drilling: Inclined Entry
Drilling: Inclined Exit
Drilling: X-Offset
Drilling: Convex
Shank - Cylindrical with Flat and Flange
Through Coolant: Radial: Indexable Drilling
Drilling: Blind
Chain Drilling
Drilling: Cross-Hole Drilling
Drilling: Half-Cylindrical Drilling
Drilling: Corner Drilling 45°Downloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 5692424 |
| ISO katalogové ID | DFSP2125R5SSF200 |
| ANSI katalogové ID | DFSP2125R5SSF200 |
| [D] Adapter / Shank / Bore Diameter | 50.8 mm |
| [D] Adapter / Shank / Bore Diameter | 2 in |
| [D1] Drill Diameter M | 53.975 mm |
| [D1] Drill Diameter M | 2.125 in |
| [L1] Insert Gage Length | 323.85 mm |
| [L1] Insert Gage Length | 12.75 in |
| [L4] Maximum Drilling Depth | 269.875 mm |
| [L4] Maximum Drilling Depth | 10.625 in |
| [L5] Drill Point Length | 1.7 mm |
| [L5] Drill Point Length | .0669 in |
| [LS] Shank Length | 101.6 mm |
| [LS] Shank Length | 4 in |
| [CF] Coolant Size Radial | 1/8 - 27 NPT |
| [CS] Coolant Supply Size | 1/4 -18 NPT |
| Gage Insert | SPPX15T5. |
| Gage Insert 2 | DFT0905. |
DrillingDrilling: Inclined EntryDrilling: Inclined ExitDrilling: X-OffsetDrilling: ConvexShank - Cylindrical with Flat and FlangeThrough Coolant: Radial: Indexable DrillingDrilling: BlindChain DrillingDrilling: Cross-Hole DrillingDrilling: Half-Cylindrical DrillingDrilling: Corner Drilling 45°Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| WARNING During through-hole operations, a slug or disc is produced as the tool breaks through the workpiece. When the drill is stationary and the workpiece is rotating, this slug may be hurled from the chuck by centrifugal force. Provide adequate shielding to protect bystanders. |
 | ||||
| D | LS | CF | CS | pipe plug |
| 0.750 | 2.00 | 1/8-27 NPT | R 1/8-27 NPT | 1025612 |
| 1.000 | 3.00 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| 1.250 | 3.25 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| 1.500 | 3.75 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| 2.000 | 4.00 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| Inch | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (fz) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | SPGX05 DFTX2 .563–.688 | SPGX06 DFT03 .703–.844 | SPGX07 DFT05 .875–1.000 | SPGX09 DFT05 1.025–1.250 | SPGX12 DFT06/..07 1.313–1.656 | SPGX15 DFT07/..09 1.688–2.125 | ||||||
| P | 1 | S | O | MD | KCPK10 | 1017 | 1066 | 1181 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 |
| I | MD | KC7140 | |||||||||||||
| U | O | FP | KCU25 | 656 | 705 | 754 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 426 | 443 | 492 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | MD | KCPK10 | 1017 | 1066 | 1181 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| I | MD | KC7140 | |||||||||||||
| U | O | FP | KCU25 | 656 | 705 | 754 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 426 | 443 | 492 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | MD | KC7140 | |||||||||||||
| 3 | S | O | MD | KCPK10 | 853 | 935 | 1050 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| I | MD | KC7140 | |||||||||||||
| U | O | FP | KCU25 | 590 | 640 | 722 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 361 | 394 | 459 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | MD | KC7140 | |||||||||||||
| 4 | S | O | FP | KCPK10 | 722 | 820 | 984 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU25 | 492 | 590 | 722 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 295 | 361 | 459 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | MD | KC7140 | |||||||||||||
| 5 | S | O | HP | KCU25 | 590 | 656 | 722 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 394 | 443 | 492 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 230 | 279 | 328 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | MD | KC7140 | |||||||||||||
| 6 | S | O | HP | KCU25 | 590 | 656 | 722 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 394 | 443 | 492 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 230 | 279 | 328 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | MD | KC7140 | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (fz) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | SPGX05 DFTX2 .563–.688 | SPGX06 DFT03 .703–.844 | SPGX07 DFT05 .875–1.000 | SPGX09 DFT05 1.025–1.250 | SPGX12 DFT06/..07 1.313–1.656 | SPGX15 DFT07/..09 1.688–2.125 | |
| P | 1 | S | O | MD | KCPK10 | 1017 | 1066 | 1181 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 |
| 1 | S | I | MD | KC7140 | 1017 | 1066 | 1181 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| 1 | U | O | FP | KCU25 | 656 | 705 | 754 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 1 | U | I | MD | KC7140 | 656 | 705 | 754 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 1 | I | O | HP | KCU40 | 426 | 443 | 492 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 1 | I | I | MD | KC7140 | 426 | 443 | 492 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 2 | S | O | MD | KCPK10 | 1017 | 1066 | 1181 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| 2 | S | I | MD | KC7140 | 1017 | 1066 | 1181 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| 2 | U | O | FP | KCU25 | 656 | 705 | 754 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 2 | U | I | MD | KC7140 | 656 | 705 | 754 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 2 | I | O | HP | KCU40 | 426 | 443 | 492 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 2 | I | I | MD | KC7140 | 426 | 443 | 492 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 3 | S | O | MD | KCPK10 | 853 | 935 | 1050 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| 3 | S | I | MD | KC7140 | 853 | 935 | 1050 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| 3 | U | O | FP | KCU25 | 590 | 640 | 722 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 3 | U | I | MD | KC7140 | 590 | 640 | 722 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 3 | I | O | HP | KCU40 | 361 | 394 | 459 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 3 | I | I | MD | KC7140 | 361 | 394 | 459 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 4 | S | O | FP | KCPK10 | 722 | 820 | 984 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| 4 | S | I | MD | KC7140 | 722 | 820 | 984 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| 4 | U | O | HP | KCU25 | 492 | 590 | 722 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 4 | U | I | MD | KC7140 | 492 | 590 | 722 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 4 | I | O | HP | KCU40 | 295 | 361 | 459 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 4 | I | I | MD | KC7140 | 295 | 361 | 459 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 5 | S | O | HP | KCU25 | 590 | 656 | 722 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| 5 | S | I | MD | KC7140 | 590 | 656 | 722 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| 5 | U | O | HP | KCU40 | 394 | 443 | 492 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 5 | U | I | MD | KC7140 | 394 | 443 | 492 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 5 | I | O | HP | KC7140 | 230 | 279 | 328 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 5 | I | I | MD | KC7140 | 230 | 279 | 328 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 6 | S | O | HP | KCU25 | 590 | 656 | 722 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| 6 | S | I | MD | KC7140 | 590 | 656 | 722 | SFM | 0.0024–0.0043 | 0.0031–0.0055 | 0.0039–0.0071 | 0.0055–0.0098 | 0.0063–0.0118 | 0.0071–0.0118 | |
| 6 | U | O | HP | KCU40 | 394 | 443 | 492 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 6 | U | I | MD | KC7140 | 394 | 443 | 492 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 6 | I | O | HP | KC7140 | 230 | 279 | 328 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 6 | I | I | MD | KC7140 | 230 | 279 | 328 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| Inch | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (fz) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | SPGX05 DFTX2 .563–.688 | SPGX06 DFT03 .703–.844 | SPGX07 DFT05 .875–1.000 | SPGX09 DFT05 1.025–1.250 | SPGX12 DFT06/..07 1.313–1.656 | SPGX15 DFT07/..09 1.688–2.125 | ||||||
| M | 1 | S | O | FP | KCU25 | 492 | 623 | 754 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KCU40 | 328 | 426 | 525 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0079 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 197 | 262 | 328 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0071 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | FP | KCU25 | 492 | 590 | 689 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KCU40 | 328 | 426 | 525 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0079 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 197 | 262 | 328 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0071 | ||
| I | MD | KC7140 | |||||||||||||
| 3 | S | O | HP | KCU25 | 328 | 426 | 525 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 262 | 361 | 459 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0079 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 164 | 230 | 295 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0071 | ||
| I | MD | KC7140 | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (fz) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | SPGX05 DFTX2 .563–.688 | SPGX06 DFT03 .703–.844 | SPGX07 DFT05 .875–1.000 | SPGX09 DFT05 1.025–1.250 | SPGX12 DFT06/..07 1.313–1.656 | SPGX15 DFT07/..09 1.688–2.125 | |
| M | 1 | S | O | FP | KCU25 | 492 | 623 | 754 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 |
| 1 | S | I | MD | KC7140 | 492 | 623 | 754 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 1 | U | O | MD | KCU40 | 328 | 426 | 525 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0079 | |
| 1 | U | I | MD | KC7140 | 328 | 426 | 525 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0079 | |
| 1 | I | O | MD | KC7140 | 197 | 262 | 328 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0071 | |
| 1 | I | I | MD | KC7140 | 197 | 262 | 328 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0071 | |
| 2 | S | O | FP | KCU25 | 492 | 590 | 689 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 2 | S | I | MD | KC7140 | 492 | 590 | 689 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 2 | U | O | MD | KCU40 | 328 | 426 | 525 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0079 | |
| 2 | U | I | MD | KC7140 | 328 | 426 | 525 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0079 | |
| 2 | I | O | MD | KC7140 | 197 | 262 | 328 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0071 | |
| 2 | I | I | MD | KC7140 | 197 | 262 | 328 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0071 | |
| 3 | S | O | HP | KCU25 | 328 | 426 | 525 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 3 | S | I | HP | KC7140 | 328 | 426 | 525 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 3 | U | O | HP | KCU40 | 262 | 361 | 459 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0079 | |
| 3 | U | I | HP | KC7140 | 262 | 361 | 459 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0079 | |
| 3 | I | O | MD | KC7140 | 164 | 230 | 295 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0071 | |
| 3 | I | I | MD | KC7140 | 164 | 230 | 295 | SFM | 0.0012–0.0020 | 0.0016–0.0028 | 0.0020–0.0035 | 0.0028–0.0051 | 0.0031–0.0063 | 0.0039–0.0071 | |
| Inch | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (fz) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | SPGX05 DFTX2 .563–.688 | SPGX06 DFT03 .703–.844 | SPGX07 DFT05 .875–1.000 | SPGX09 DFT05 1.025–1.250 | SPGX12 DFT06/..07 1.313–1.656 | SPGX15 DFT07/..09 1.688–2.125 | ||||||
| K | 1 | S | O | FP | KCPK10 | 656 | 787 | 984 | SFM | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 |
| I | HP | KCU40 | |||||||||||||
| U | O | FP | KCU25 | 394 | 508 | 656 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | FP | KC7140 | 262 | 328 | 410 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | HP | KC7140 | |||||||||||||
| 2 | S | O | FP | KCPK10 | 590 | 722 | 853 | SFM | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 361 | 459 | 558 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 262 | 328 | 394 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | HP | KC7140 | |||||||||||||
| 3 | S | O | HP | KCPK10 | 590 | 722 | 853 | SFM | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 361 | 459 | 558 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 262 | 328 | 394 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | HP | KC7140 | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (fz) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | SPGX05 DFTX2 .563–.688 | SPGX06 DFT03 .703–.844 | SPGX07 DFT05 .875–1.000 | SPGX09 DFT05 1.025–1.250 | SPGX12 DFT06/..07 1.313–1.656 | SPGX15 DFT07/..09 1.688–2.125 | |
| K | 1 | S | O | FP | KCPK10 | 656 | 787 | 984 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 |
| 1 | S | I | HP | KCU40 | 656 | 787 | 984 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 1 | U | O | FP | KCU25 | 394 | 508 | 656 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 1 | U | I | HP | KC7140 | 394 | 508 | 656 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 1 | I | O | FP | KC7140 | 262 | 328 | 410 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 1 | I | I | HP | KC7140 | 262 | 328 | 410 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 2 | S | O | FP | KCPK10 | 590 | 722 | 853 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 2 | S | I | HP | KCU40 | 590 | 722 | 853 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 2 | U | O | HP | KCU25 | 361 | 459 | 558 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 2 | U | I | HP | KC7140 | 361 | 459 | 558 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 2 | I | O | HP | KC7140 | 262 | 328 | 394 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 2 | I | I | HP | KC7140 | 262 | 328 | 394 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 3 | S | O | HP | KCPK10 | 590 | 722 | 853 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 3 | S | I | HP | KCU40 | 590 | 722 | 853 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 3 | U | O | HP | KCU25 | 361 | 459 | 558 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 3 | U | I | HP | KC7140 | 361 | 459 | 558 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 3 | I | O | HP | KC7140 | 262 | 328 | 394 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 3 | I | I | HP | KC7140 | 262 | 328 | 394 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| Inch | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (fz) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | SPGX05 DFTX2 .563–.688 | SPGX06 DFT03 .703–.844 | SPGX07 DFT05 .875–1.000 | SPGX09 DFT05 1.025–1.250 | SPGX12 DFT06/..07 1.313–1.656 | SPGX15 DFT07/..09 1.688–2.125 | ||||||
| N | 1 | S | O | HP | KCPK10 | 1148 | 1640 | 2132 | SFM | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 |
| I | HP | KMF | |||||||||||||
| U | O | HP | KCU40 | 984 | 1312 | 1640 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | ||
| I | HP | KMF | |||||||||||||
| I | O | HP | KCU40 | 656 | 984 | 1312 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | HP | KMF | |||||||||||||
| 2 | S | O | HP | KCPK10 | 984 | 1312 | 1640 | SFM | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| I | HP | KMF | |||||||||||||
| U | O | HP | KCU40 | 820 | 1148 | 1476 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | ||
| I | HP | KMF | |||||||||||||
| I | O | HP | KCU40 | 574 | 820 | 1066 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | HP | KMF | |||||||||||||
| 3 | S | O | HP | KCPK10 | 984 | 1312 | 1640 | SFM | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| I | HP | KMF | |||||||||||||
| U | O | HP | KCU40 | 820 | 1148 | 1476 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | ||
| I | HP | KMF | |||||||||||||
| I | O | HP | KCU40 | 492 | 820 | 1148 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | HP | KMF | |||||||||||||
| 4 | S | O | HP | KCU25 | 984 | 1312 | 1640 | SFM | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 820 | 1148 | 1476 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 656 | 984 | 1312 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | HP | KC7140 | |||||||||||||
| 5 | S | O | HP | KCU40 | 1312 | 1476 | 1640 | SFM | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| I | HP | KMF | |||||||||||||
| U | O | HP | KCU40 | 820 | 1148 | 1476 | SFM | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | ||
| I | HP | KMF | |||||||||||||
| I | O | HP | KCU40 | 656 | 984 | 1312 | SFM | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | ||
| I | HP | KMF | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (fz) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | SPGX05 DFTX2 .563–.688 | SPGX06 DFT03 .703–.844 | SPGX07 DFT05 .875–1.000 | SPGX09 DFT05 1.025–1.250 | SPGX12 DFT06/..07 1.313–1.656 | SPGX15 DFT07/..09 1.688–2.125 | |
| N | 1 | S | O | HP | KCPK10 | 1148 | 1640 | 2132 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 |
| 1 | S | I | HP | KMF | 1148 | 1640 | 2132 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 1 | U | O | HP | KCU40 | 984 | 1312 | 1640 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 1 | U | I | HP | KMF | 984 | 1312 | 1640 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 1 | I | O | HP | KCU40 | 656 | 984 | 1312 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 1 | I | I | HP | KMF | 656 | 984 | 1312 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 2 | S | O | HP | KCPK10 | 984 | 1312 | 1640 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 2 | S | I | HP | KMF | 984 | 1312 | 1640 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 2 | U | O | HP | KCU40 | 820 | 1148 | 1476 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 2 | U | I | HP | KMF | 820 | 1148 | 1476 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 2 | I | O | HP | KCU40 | 574 | 820 | 1066 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 2 | I | I | HP | KMF | 574 | 820 | 1066 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 3 | S | O | HP | KCPK10 | 984 | 1312 | 1640 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 3 | S | I | HP | KMF | 984 | 1312 | 1640 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 3 | U | O | HP | KCU40 | 820 | 1148 | 1476 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 3 | U | I | HP | KMF | 820 | 1148 | 1476 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 3 | I | O | HP | KCU40 | 492 | 820 | 1148 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 3 | I | I | HP | KMF | 492 | 820 | 1148 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 4 | S | O | HP | KCU25 | 984 | 1312 | 1640 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 4 | S | I | HP | KC7140 | 984 | 1312 | 1640 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 4 | U | O | HP | KCU40 | 820 | 1148 | 1476 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 4 | U | I | HP | KC7140 | 820 | 1148 | 1476 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 4 | I | O | HP | KCU40 | 656 | 984 | 1312 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 4 | I | I | HP | KC7140 | 656 | 984 | 1312 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 5 | S | O | HP | KCU40 | 1312 | 1476 | 1640 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 5 | S | I | HP | KMF | 1312 | 1476 | 1640 | sfm | 0.0028–0.0047 | 0.0039–0.0063 | 0.0047–0.0079 | 0.0063–0.0110 | 0.0071–0.0126 | 0.0079–0.0134 | |
| 5 | U | O | HP | KCU40 | 820 | 1148 | 1476 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 5 | U | I | HP | KMF | 820 | 1148 | 1476 | sfm | 0.0020–0.0035 | 0.0024–0.0047 | 0.0031–0.0059 | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | |
| 5 | I | O | HP | KCU40 | 656 | 984 | 1312 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| 5 | I | I | HP | KMF | 656 | 984 | 1312 | sfm | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | 0.0035–0.0059 | 0.0043–0.0071 | 0.0051–0.0098 | |
| Inch | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (fz) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | SPGX05 DFTX2 .563–.688 | SPGX06 DFT03 .703–.844 | SPGX07 DFT05 .875–1.000 | SPGX09 DFT05 1.025–1.250 | SPGX12 DFT06/..07 1.313–1.656 | SPGX15 DFT07/..09 1.688–2.125 | ||||||
| S | 1 | S | O | HP | KCU40 | 197 | 230 | 246 | SFM | 0.0012–0.0024 | 0.0016–0.0031 | 0.0020–0.0039 | 0.0031–0.0047 | 0.0039–0.0059 | 0.0047–0.0071 |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 131 | 164 | 197 | SFM | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 82 | 98 | 131 | SFM | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | HP | KCU40 | 164 | 197 | 230 | SFM | 0.0012–0.0024 | 0.0016–0.0031 | 0.0020–0.0039 | 0.0031–0.0047 | 0.0039–0.0059 | 0.0047–0.0071 | |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 98 | 131 | 164 | SFM | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 82 | 98 | 131 | SFM | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | ||
| I | MD | KC7140 | |||||||||||||
| 3 | S | O | HP | KCU40 | 230 | 262 | 295 | SFM | 0.0012–0.0024 | 0.0016–0.0031 | 0.0020–0.0039 | 0.0031–0.0047 | 0.0039–0.0059 | 0.0047–0.0071 | |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 164 | 197 | 230 | SFM | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 98 | 131 | 164 | SFM | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | ||
| I | MD | KC7140 | |||||||||||||
| 4 | S | O | HP | KCU40 | 230 | 262 | 295 | SFM | 0.0012–0.0024 | 0.0016–0.0031 | 0.0020–0.0039 | 0.0031–0.0047 | 0.0039–0.0059 | 0.0047–0.0071 | |
| I | MD | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 164 | 197 | 230 | SFM | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 98 | 131 | 164 | SFM | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | ||
| I | MD | KC7140 | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (fz) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | SPGX05 DFTX2 .563–.688 | SPGX06 DFT03 .703–.844 | SPGX07 DFT05 .875–1.000 | SPGX09 DFT05 1.025–1.250 | SPGX12 DFT06/..07 1.313–1.656 | SPGX15 DFT07/..09 1.688–2.125 | |
| S | 1 | S | O | HP | KCU40 | 197 | 230 | 246 | sfm | 0.0012–0.0024 | 0.0016–0.0031 | 0.0020–0.0039 | 0.0031–0.0047 | 0.0039–0.0059 | 0.0047–0.0071 |
| 1 | S | I | MD | KC7140 | 197 | 230 | 246 | sfm | 0.0012–0.0024 | 0.0016–0.0031 | 0.0020–0.0039 | 0.0031–0.0047 | 0.0039–0.0059 | 0.0047–0.0071 | |
| 1 | U | O | HP | KCU40 | 131 | 164 | 197 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 1 | U | I | MD | KC7140 | 131 | 164 | 197 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 1 | I | O | HP | KCU40 | 82 | 98 | 131 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 1 | I | I | MD | KC7140 | 82 | 98 | 131 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 2 | S | O | HP | KCU40 | 164 | 197 | 230 | sfm | 0.0012–0.0024 | 0.0016–0.0031 | 0.0020–0.0039 | 0.0031–0.0047 | 0.0039–0.0059 | 0.0047–0.0071 | |
| 2 | S | I | MD | KC7140 | 164 | 197 | 230 | sfm | 0.0012–0.0024 | 0.0016–0.0031 | 0.0020–0.0039 | 0.0031–0.0047 | 0.0039–0.0059 | 0.0047–0.0071 | |
| 2 | U | O | HP | KCU40 | 98 | 131 | 164 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 2 | U | I | MD | KC7140 | 98 | 131 | 164 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 2 | I | O | HP | KCU40 | 82 | 98 | 131 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 2 | I | I | MD | KC7140 | 82 | 98 | 131 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 3 | S | O | HP | KCU40 | 230 | 262 | 295 | sfm | 0.0012–0.0024 | 0.0016–0.0031 | 0.0020–0.0039 | 0.0031–0.0047 | 0.0039–0.0059 | 0.0047–0.0071 | |
| 3 | S | I | MD | KC7140 | 230 | 262 | 295 | sfm | 0.0012–0.0024 | 0.0016–0.0031 | 0.0020–0.0039 | 0.0031–0.0047 | 0.0039–0.0059 | 0.0047–0.0071 | |
| 3 | U | O | HP | KCU40 | 164 | 197 | 230 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 3 | U | I | MD | KC7140 | 164 | 197 | 230 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 3 | I | O | HP | KCU40 | 98 | 131 | 164 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 3 | I | I | MD | KC7140 | 98 | 131 | 164 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 4 | S | O | HP | KCU40 | 230 | 262 | 295 | sfm | 0.0012–0.0024 | 0.0016–0.0031 | 0.0020–0.0039 | 0.0031–0.0047 | 0.0039–0.0059 | 0.0047–0.0071 | |
| 4 | S | I | MD | KC7140 | 230 | 262 | 295 | sfm | 0.0012–0.0024 | 0.0016–0.0031 | 0.0020–0.0039 | 0.0031–0.0047 | 0.0039–0.0059 | 0.0047–0.0071 | |
| 4 | U | O | HP | KCU40 | 164 | 197 | 230 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 4 | U | I | MD | KC7140 | 164 | 197 | 230 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 4 | I | O | HP | KCU40 | 98 | 131 | 164 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
| 4 | I | I | MD | KC7140 | 98 | 131 | 164 | sfm | 0.0008–0.0012 | 0.0008–0.0016 | 0.0012–0.0020 | 0.0016–0.0024 | 0.0020–0.0031 | 0.0024–0.0039 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?