환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

GOtap

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (720)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(720)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(720)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(678)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(678)
    • M Stainless Steel (737)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(737)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(695)
    • K Cast Iron (692)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(692)
    • N Non-Ferrous Materials (123)
      • N1
        Wrought Aluminum (109)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(123)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (109)
    1차 선택 선택
    • BR (15)
    • CN (100)
    • DE (91)
    • GB (45)
    • IN (3)
    • SG (28)
    • US (264)
    Applications
    Applications
    • Pipe ThreadPipe Thread (42)
    • Tapping Blind HoleTapping Blind Hole (434)
    • Tapping Through HoleTapping Through Hole (325)
    • ThreadingThreading (759)
    Cutting Length
    Cutting Length
    • 5.0 mm(4)
    • 7.0 mm(18)
    • 8.0 mm(18)
    • 8.201 mm(1)
    • 9.0 mm(4)
    • 9.1 mm(1)
    • 9.5 mm(1)
    • 9.701 mm(41)
    • 9.9 mm(8)
    • 10.0 mm(19)
    • 10.101 mm(1)
    • 11.0 mm(8)
    • 11.5 mm(2)
    • 11.701 mm(1)
    • 12.0 mm(20)
    • 12.101 mm(1)
    • 12.201 mm(3)
    • 12.5 mm(3)
    • 12.701 mm(39)
    • 13.0 mm(33)
    • 13.201 mm(5)
    • 13.4 mm(1)
    • 14.201 mm(1)
    • 14.8 mm(10)
    • 14.9 mm(2)
    • 15.0 mm(56)
    • 15.8 mm(2)
    • 16.0 mm(39)
    • 17.0 mm(5)
    • 17.3 mm(2)
    • 17.475 mm(3)
    • 17.5 mm(37)
    • 18.0 mm(26)
    • 18.7 mm(3)
    • 18.901 mm(2)
    • 19.0 mm(6)
    • 19.05 mm(8)
    • 19.1 mm(32)
    • 20.0 mm(17)
    • 21.0 mm(21)
    • 22.0 mm(6)
    • 22.3 mm(8)
    • 22.401 mm(13)
    • 23.0 mm(4)
    • 23.901 mm(37)
    • 24.0 mm(20)
    • 25.0 mm(19)
    • 25.401 mm(17)
    • 26.201 mm(8)
    • 27.701 mm(38)
    • 28.0 mm(1)
    • 30.0 mm(18)
    • 31.0 mm(14)
    • 33.0 mm(1)
    • 34.0 mm(5)
    • 34.926 mm(7)
    • 35.0 mm(7)
    • 36.0 mm(4)
    • 38.0 mm(1)
    • 38.1 mm(6)
    • 40.0 mm(8)
    • 42.0 mm(4)
    • 43.5 mm(4)
    • 44.45 mm(2)
    • 48.0 mm(2)
    • 50.0 mm(1)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.197 in(4)
    • 0.276 in(18)
    • 0.315 in(18)
    • 0.323 in(1)
    • 0.354 in(4)
    • 0.358 in(1)
    • 0.374 in(1)
    • 0.382 in(41)
    • 0.39 in(8)
    • 0.394 in(19)
    • 0.398 in(1)
    • 0.433 in(8)
    • 0.453 in(2)
    • 0.461 in(1)
    • 0.473 in(20)
    • 0.477 in(1)
    • 0.48 in(3)
    • 0.492 in(3)
    • 0.5 in(39)
    • 0.512 in(33)
    • 0.52 in(5)
    • 0.528 in(1)
    • 0.559 in(1)
    • 0.583 in(10)
    • 0.587 in(2)
    • 0.591 in(56)
    • 0.622 in(2)
    • 0.63 in(39)
    • 0.669 in(5)
    • 0.681 in(2)
    • 0.689 in(3)
    • 0.69 in(37)
    • 0.709 in(26)
    • 0.736 in(3)
    • 0.744 in(2)
    • 0.748 in(6)
    • 0.75 in(8)
    • 0.752 in(32)
    • 0.787 in(17)
    • 0.828 in(21)
    • 0.866 in(6)
    • 0.878 in(8)
    • 0.882 in(13)
    • 0.906 in(4)
    • 0.942 in(37)
    • 0.946 in(20)
    • 0.984 in(19)
    • 1.0 in(17)
    • 1.032 in(8)
    • 1.091 in(38)
    • 1.102 in(1)
    • 1.181 in(18)
    • 1.22 in(14)
    • 1.299 in(1)
    • 1.339 in(5)
    • 1.375 in(7)
    • 1.379 in(7)
    • 1.417 in(4)
    • 1.496 in(1)
    • 1.5 in(6)
    • 1.575 in(8)
    • 1.655 in(4)
    • 1.713 in(4)
    • 1.75 in(2)
    • 1.891 in(2)
    • 1.969 in(1)
    Cutting Length Min받는 사람Cutting Length Max
    Type of Thread
    Type of Thread
    • G (14)
    • M (318)
    • NPT (16)
    • NPTF (12)
    • UNC (227)
    • UNF (154)
    • UNJ (18)
    Thread Size
    Thread Size
    • 1 - 11 (2)
    • 1 - 11 1/2 (2)
    • 1 - 12 (2)
    • 1 - 8 (7)
    • 1 1/2 - 6 (2)
    • 1 1/4 - 7 (3)
    • 1 1/8 - 12 (2)
    • 1 1/8 - 7 (4)
    • 1 3/4 - 5 (1)
    • 1 3/8 - 6 (1)
    • 1/16 - 27 (3)
    • 1/2 - 13 (16)
    • 1/2 - 14 (6)
    • 1/2 - 20 (16)
    • 1/4 - 18 (4)
    • 1/4 - 19 (2)
    • 1/4 - 20 (23)
    • 1/4 - 28 (21)
    • 1/8 - 27 (8)
    • 1/8 - 28 (3)
    • 10 - 24 (17)
    • 10 - 32 (23)
    • 12 - 24 (2)
    • 12 - 28 (2)
    • 2 - 56 (4)
    • 3 - 48 (2)
    • 3/4 - 10 (10)
    • 3/4 - 14 (5)
    • 3/4 - 16 (9)
    • 3/8 - 16 (20)
    • 3/8 - 18 (4)
    • 3/8 - 19 (2)
    • 3/8 - 24 (19)
    • 4 - 40 (20)
    • 4 - 48 (3)
    • 5 - 40 (3)
    • 5/16 - 18 (17)
    • 5/16 - 24 (17)
    • 5/8 - 11 (15)
    • 5/8 - 18 (15)
    • 6 - 32 (20)
    • 6 - 40 (6)
    • 7/16 - 14 (11)
    • 7/16 - 20 (17)
    • 7/8 - 14 (4)
    • 7/8 - 9 (5)
    • 8 - 32 (23)
    • 8 - 36 (2)
    • 9/16 - 12 (8)
    • 9/16 - 18 (8)
    • M10 X 0,75 (2)
    • M10 X 1 (3)
    • M10 X 1,25 (7)
    • M10 X 1,5 (20)
    • M10 X 1,50 (2)
    • M12 X 1 (3)
    • M12 X 1,25 (7)
    • M12 X 1,5 (6)
    • M12 X 1,75 (18)
    • M14 X 1 (3)
    • M14 X 1,25 (1)
    • M14 X 1,5 (7)
    • M14 X 2 (12)
    • M14 X 2,0 (1)
    • M16 X 1 (1)
    • M16 X 1,5 (9)
    • M16 X 2 (13)
    • M16 X 2,0 (3)
    • M18 X 1,5 (5)
    • M18 X 2 (3)
    • M18 X 2,5 (6)
    • M2 X 0,4 (7)
    • M2,5 X 0,45 (3)
    • M20 X 1,5 (3)
    • M20 X 2 (3)
    • M20 X 2,5 (8)
    • M22 X 1,5 (3)
    • M22 X 2 (2)
    • M22 X 2,5 (4)
    • M24 X 1,5 (3)
    • M24 X 2 (2)
    • M24 X 3 (4)
    • M27 X 1,5 (1)
    • M27 X 3 (3)
    • M3 X 0,5 (17)
    • M3,5 X 0,6 (4)
    • M30 X 1,5 (2)
    • M30 X 2 (1)
    • M30 X 3,5 (4)
    • M33 X 3,5 (3)
    • M36 X 4 (4)
    • M39 X 4 (1)
    • M4 X 0,5 (1)
    • M4 X 0,7 (16)
    • M42 X 4,5 (2)
    • M5 X 0,5 (1)
    • M5 X 0,8 (19)
    • M6 X 0,5 (1)
    • M6 X 0,75 (3)
    • M6 X 1 (21)
    • M7 X 1 (7)
    • M8 X 0,75 (1)
    • M8 X 1 (7)
    • M8 X 1,0 (1)
    • M8 X 1,25 (24)
    Thread Tolerance Class ANSI
    Thread Tolerance Class ANSI
    • 2B (76)
    • 3B (18)
    Thread Tolerance Class ISO
    Thread Tolerance Class ISO
    • 6G-I (22)
    • 6H-I (213)
    Tap PD Class
    Tap PD Class
    • 0 (36)
    • 6G (8)
    • 6H (17)
    • D3 (7)
    • D4 (16)
    • D5 (26)
    • D6 (24)
    • D7 (10)
    • H2 (30)
    • H3 (144)
    • H4 (20)
    • H5 (63)
    • H6 (20)
    • H7 (28)
    Tap Tolerance Class
    Tap Tolerance Class
    • ISO 2 (212)
    • ISO 3 (23)
    Number of Flutes
    Number of Flutes
    • 2 (124)
    • 3 (494)
    • 4 (135)
    • 5 (6)
    Over All Length [L]
    Over All Length [L]
    • 1.752 in(3)
    • 1.756 in(1)
    • 1.772 in(7)
    • 1.815 in(1)
    • 1.819 in(1)
    • 1.879 in(13)
    • 1.883 in(6)
    • 1.937 in(2)
    • 1.941 in(7)
    • 1.945 in(1)
    • 1.969 in(3)
    • 1.988 in(12)
    • 1.992 in(3)
    • 2.0 in(8)
    • 2.114 in(1)
    • 2.118 in(18)
    • 2.125 in(11)
    • 2.126 in(6)
    • 2.13 in(2)
    • 2.205 in(18)
    • 2.209 in(1)
    • 2.213 in(1)
    • 2.362 in(10)
    • 2.37 in(9)
    • 2.374 in(5)
    • 2.378 in(11)
    • 2.382 in(3)
    • 2.43 in(2)
    • 2.437 in(4)
    • 2.48 in(15)
    • 2.488 in(2)
    • 2.496 in(12)
    • 2.5 in(24)
    • 2.563 in(4)
    • 2.705 in(4)
    • 2.709 in(2)
    • 2.713 in(3)
    • 2.717 in(8)
    • 2.721 in(20)
    • 2.724 in(2)
    • 2.757 in(18)
    • 2.761 in(1)
    • 2.765 in(3)
    • 2.918 in(2)
    • 2.926 in(6)
    • 2.938 in(17)
    • 2.942 in(12)
    • 2.953 in(1)
    • 3.125 in(4)
    • 3.142 in(1)
    • 3.15 in(32)
    • 3.157 in(1)
    • 3.161 in(20)
    • 3.25 in(3)
    • 3.378 in(6)
    • 3.382 in(30)
    • 3.539 in(1)
    • 3.543 in(38)
    • 3.591 in(17)
    • 3.75 in(2)
    • 3.811 in(36)
    • 3.926 in(1)
    • 3.938 in(65)
    • 4.0 in(1)
    • 4.031 in(2)
    • 4.252 in(14)
    • 4.331 in(49)
    • 4.689 in(4)
    • 4.921 in(19)
    • 5.13 in(6)
    • 5.441 in(3)
    • 5.513 in(30)
    • 5.748 in(1)
    • 5.906 in(5)
    • 6.0 in(8)
    • 6.299 in(12)
    • 7.087 in(11)
    • 7.875 in(10)
    • 8.661 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 44.5 mm(3)
    • 44.6 mm(1)
    • 45.0 mm(7)
    • 46.1 mm(1)
    • 46.2 mm(1)
    • 47.7 mm(13)
    • 47.801 mm(6)
    • 49.2 mm(2)
    • 49.301 mm(7)
    • 49.401 mm(1)
    • 50.0 mm(3)
    • 50.5 mm(12)
    • 50.6 mm(3)
    • 50.801 mm(8)
    • 53.7 mm(1)
    • 53.801 mm(18)
    • 53.975 mm(11)
    • 54.0 mm(6)
    • 54.1 mm(2)
    • 56.0 mm(18)
    • 56.1 mm(1)
    • 56.2 mm(1)
    • 60.0 mm(10)
    • 60.2 mm(9)
    • 60.301 mm(5)
    • 60.401 mm(11)
    • 60.5 mm(3)
    • 61.7 mm(2)
    • 61.901 mm(4)
    • 63.0 mm(15)
    • 63.2 mm(2)
    • 63.401 mm(12)
    • 63.5 mm(24)
    • 65.101 mm(4)
    • 68.7 mm(4)
    • 68.8 mm(2)
    • 68.9 mm(3)
    • 69.0 mm(8)
    • 69.101 mm(20)
    • 69.2 mm(2)
    • 70.0 mm(18)
    • 70.101 mm(1)
    • 70.2 mm(3)
    • 74.101 mm(2)
    • 74.3 mm(6)
    • 74.601 mm(17)
    • 74.7 mm(12)
    • 75.0 mm(1)
    • 79.375 mm(4)
    • 79.801 mm(1)
    • 80.0 mm(32)
    • 80.2 mm(1)
    • 80.301 mm(20)
    • 82.551 mm(3)
    • 85.801 mm(6)
    • 85.9 mm(30)
    • 89.9 mm(1)
    • 90.0 mm(38)
    • 91.2 mm(17)
    • 95.25 mm(2)
    • 96.801 mm(36)
    • 99.7 mm(1)
    • 100.0 mm(65)
    • 101.601 mm(1)
    • 102.4 mm(2)
    • 108.0 mm(14)
    • 110.0 mm(49)
    • 119.101 mm(4)
    • 125.0 mm(19)
    • 130.3 mm(6)
    • 138.201 mm(3)
    • 140.0 mm(30)
    • 146.0 mm(1)
    • 150.0 mm(5)
    • 152.4 mm(8)
    • 160.0 mm(12)
    • 180.0 mm(11)
    • 200.0 mm(10)
    • 220.0 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    application
    Coating
    Coating
    • Oxide (24)
    • TiN (13)
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KSMN34 (27)
    • KSP32 (82)
    • KSP39 (537)
    • KSU31 (113)
    Tap Standard
    Tap Standard
    • ANSI (407)
    • DIN 371 (119)
    • DIN 374 (84)
    • DIN 376 (124)
    • JIS (2)
    Tap Type
    Tap Type
    • 10 (13)
    • 11 (272)
    • 13 (1)
    • 8 (473)
    frontEnd
    Thread TPI
    Thread TPI
    • 5.0 (1)
    • 6.0 (3)
    • 7.0 (7)
    • 8.0 (7)
    • 9.0 (5)
    • 10.0 (10)
    • 11.0 (17)
    • 11.5 (2)
    • 12.0 (12)
    • 13.0 (16)
    • 14.0 (26)
    • 16.0 (29)
    • 18.0 (48)
    • 19.0 (4)
    • 20.0 (56)
    • 24.0 (55)
    • 27.0 (11)
    • 28.0 (26)
    • 32.0 (66)
    • 36.0 (2)
    • 40.0 (29)
    • 48.0 (5)
    • 56.0 (4)
    Thread TPI Min받는 사람Thread TPI Max
    Thread Pitch
    Thread Pitch
    • 0.4 mm(7)
    • 0.45 mm(3)
    • 0.5 mm(20)
    • 0.601 mm(4)
    • 0.701 mm(16)
    • 0.75 mm(6)
    • 0.8 mm(19)
    • 1.0 mm(46)
    • 1.25 mm(39)
    • 1.5 mm(61)
    • 1.75 mm(18)
    • 2.0 mm(40)
    • 2.5 mm(18)
    • 3.0 mm(7)
    • 3.5 mm(7)
    • 4.0 mm(5)
    • 4.5 mm(2)
    Thread Pitch Min받는 사람Thread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.016 in(7)
    • 0.019 in(3)
    • 0.02 in(20)
    • 0.024 in(4)
    • 0.028 in(16)
    • 0.03 in(6)
    • 0.031 in(19)
    • 0.039 in(46)
    • 0.049 in(39)
    • 0.06 in(61)
    • 0.069 in(18)
    • 0.079 in(40)
    • 0.098 in(18)
    • 0.119 in(7)
    • 0.138 in(7)
    • 0.157 in(5)
    • 0.177 in(2)
    Thread Pitch Min받는 사람Thread Pitch Max
    Chamfer Form
    Chamfer Form
    • FB (126)
    • PC (311)
    • PP (41)
    • SB (280)
    • TC (1)
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 2.801 mm(11)
    • 3.5 mm(16)
    • 3.575 mm(59)
    • 4.0 mm(7)
    • 4.275 mm(27)
    • 4.5 mm(25)
    • 4.926 mm(39)
    • 5.601 mm(3)
    • 6.0 mm(41)
    • 6.2 mm(1)
    • 6.476 mm(41)
    • 7.0 mm(31)
    • 7.95 mm(7)
    • 8.0 mm(25)
    • 8.076 mm(39)
    • 8.201 mm(21)
    • 9.0 mm(29)
    • 9.326 mm(37)
    • 9.675 mm(39)
    • 10.0 mm(17)
    • 10.9 mm(17)
    • 11.0 mm(25)
    • 11.125 mm(4)
    • 12.0 mm(22)
    • 12.201 mm(36)
    • 13.775 mm(2)
    • 14.0 mm(15)
    • 14.3 mm(4)
    • 14.976 mm(14)
    • 16.0 mm(18)
    • 17.475 mm(4)
    • 17.675 mm(1)
    • 17.7 mm(3)
    • 17.776 mm(4)
    • 18.0 mm(25)
    • 20.0 mm(6)
    • 20.326 mm(6)
    • 22.0 mm(13)
    • 22.725 mm(2)
    • 22.75 mm(1)
    • 23.026 mm(3)
    • 25.0 mm(5)
    • 25.925 mm(1)
    • 28.0 mm(7)
    • 28.576 mm(2)
    • 32.0 mm(3)
    • 36.0 mm(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.11 in(11)
    • 0.138 in(16)
    • 0.142 in(59)
    • 0.157 in(7)
    • 0.168 in(27)
    • 0.177 in(25)
    • 0.194 in(39)
    • 0.221 in(3)
    • 0.237 in(41)
    • 0.244 in(1)
    • 0.255 in(41)
    • 0.276 in(31)
    • 0.313 in(7)
    • 0.315 in(25)
    • 0.318 in(39)
    • 0.323 in(21)
    • 0.354 in(29)
    • 0.367 in(37)
    • 0.381 in(39)
    • 0.394 in(17)
    • 0.429 in(17)
    • 0.433 in(25)
    • 0.438 in(4)
    • 0.473 in(22)
    • 0.48 in(36)
    • 0.542 in(2)
    • 0.551 in(15)
    • 0.564 in(4)
    • 0.59 in(14)
    • 0.63 in(18)
    • 0.689 in(4)
    • 0.697 in(1)
    • 0.698 in(3)
    • 0.701 in(4)
    • 0.709 in(25)
    • 0.787 in(6)
    • 0.8 in(6)
    • 0.866 in(13)
    • 0.895 in(2)
    • 0.896 in(1)
    • 0.907 in(3)
    • 0.984 in(5)
    • 1.022 in(1)
    • 1.102 in(7)
    • 1.125 in(2)
    • 1.26 in(3)
    • 1.417 in(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    T820 • B 타입 플러그 챔퍼 • 장비 스크류 및 Fractional • ANSI
    (130)

    T820 • B 타입 플러그 챔퍼 • 장비 스크류 및 Fractional • ANSI

    T820 • B 타입 플러그 챔퍼 • Metric DIN 371, 374 및 376
    (70)

    T820 • B 타입 플러그 챔퍼 • Metric DIN 371, 374 및 376

    T830 • C 타입 세미 바터밍 챔퍼 • Metric DIN 371, 374 및 376
    (49)

    T830 • C 타입 세미 바터밍 챔퍼 • Metric DIN 371, 374 및 376

    T832 • E 타입 바터밍 챔퍼 • Metric DIN 371, 374 및 376
    (8)

    T832 • E 타입 바터밍 챔퍼 • Metric DIN 371, 374 및 376

    T838 • Form C Semi-Bottoming Chamfer • Machine Screw and Fractional • ANSI • Tension/Compression Holders
    (109)

    T838 • Form C Semi-Bottoming Chamfer • Machine Screw and Fractional • ANSI • Tension/Compression Holders

    T838 • Form C Semi-Bottoming Chamfer • Metric • ANSI • Tension/Compression Holders
    (25)

    T838 • Form C Semi-Bottoming Chamfer • Metric • ANSI • Tension/Compression Holders

    T838 • C 타입 세미 바터밍 챔퍼 • 스크류 장비 및 분절 • DIN 371, 374 및 376 • 인장/압축 홀더
    (53)

    T838 • C 타입 세미 바터밍 챔퍼 • 스크류 장비 및 분절 • DIN 371, 374 및 376 • 인장/압축 홀더

    T838 • C 타입 세미 바터밍 챔퍼 • Metric DIN 371, 374 및 376 • 인장/압축 홀더
    (87)

    T838 • C 타입 세미 바터밍 챔퍼 • Metric DIN 371, 374 및 376 • 인장/압축 홀더

    T820 • B 타입 플러그 챔퍼 • 장비 스크류 및 Fractional • DIN 371 및 376
    (23)

    T820 • B 타입 플러그 챔퍼 • 장비 스크류 및 Fractional • DIN 371 및 376

    T830 • Form C Semi-Bottoming Chamfer • Machine Screw and Fractional • 6" Length • ANSI
    (2)

    T830 • Form C Semi-Bottoming Chamfer • Machine Screw and Fractional • 6" Length • ANSI

    T820 • Form B Plug Chamfer • Machine Screw and Fractional • 6" Length • ANSI
    (6)

    T820 • Form B Plug Chamfer • Machine Screw and Fractional • 6" Length • ANSI

    T820 • B 타입 플러그 챔퍼 • Metric • ANSI
    (33)

    T820 • B 타입 플러그 챔퍼 • Metric • ANSI

    T832 • E 타입 바터밍 챔퍼 • Metric • ANSI
    (16)

    T832 • E 타입 바터밍 챔퍼 • Metric • ANSI

    T832 • E 타입 바터밍 챔퍼 • 장비 스크류 및 Fractional • ANSI
    (37)

    T832 • E 타입 바터밍 챔퍼 • 장비 스크류 및 Fractional • ANSI

    T854 • Standard Chamfer
    (28)

    T854 • Standard Chamfer

    T857 • (G) 위드워스 파이프 나사 • DIN EN ISO 228 • C 타입 세미 바터밍 챔퍼
    (13)

    T857 • (G) 위드워스 파이프 나사 • DIN EN ISO 228 • C 타입 세미 바터밍 챔퍼

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk