환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
품목 are being added to the cart
장바구니 보기

선삭 응용 분야에서 향상된 에지 보호를 위한 가장 신뢰할 수 있는 인서트 코팅에 대해 알아보십시오.

KENGold는 내마모성이 우수하고 강력한 열 장벽을 제공하며 에지 인성을 개선하고 골드 플랭크로 마모를 쉽게 감지할 수 있는 균일한 층을 특징으로 하는 차세대 CVD 코팅 기술입니다.

Kennametal은 고급 프레싱 및 호우닝 기술을 활용하여 KENGold와 함께 일관되게 엄격한 공차 수준을 달성했으며 KCP25C 등급에 고급 코팅을 적용했습니다. 이 재종은 광범위한 선삭 응용 분야에서 강철을 가공할 때 매우 다양하게 사용할 수 있습니다. 향상된 인성과 마모 및 치핑에 대한 저항성을 제공합니다.

선삭 인서트 재종에 적용되어 향상된 에지 준비 기능과 함께 보다 안정적이고 일관된 공구 수명을 경험할 수 있습니다.



KCP25C 등급에 적용되는 KENGold 코팅 기술:

  • 플랭크 마모로부터 보호
  • 마모되거나 사용되지 않은 에지를 쉽게 식별하여 사용하지 않는 에지의 낭비를 줄입니다.
  • 마모에 강하고 강력한 단열 기능 제공
  • 출력 속도 신뢰성 향상 및 일관된 공구 수명 제공

추천 제품

  • 네거티브 스타일 인서트: C 인서트, D 인서트, R 인서트, S 인서트, T 인서트, V 인서트, W 인서트
  • 포지티브 스타일 인서트: C 인서트, D 인서트, R 인서트, S 인서트, T 인서트, V 인서트, W 인서트

 



KENGold 코팅 기술 자세히 보기

  • 가장 바깥쪽 층은 플랭크 마모로부터 보호하며 골드 색상의 TiN 상부 층으로 마모를 식별할 수 있습니다. 이를 통해 KCP25C 등급 내에서 내마모성을 개선합니다.
  • 제2층은 강한 열 장벽으로서 작용하고 마모에 저항하기 위해 최근에 개발된 균일한 나노 구조를 갖는 블랙 Al2O3 코팅으로 구성됩니다.
  • 제3층은 견고하고 내마모성인 층을 접합하는 전이 층입니다.
  • 제4층은 중온 TiCN 코팅 층 내에서 매우 균일한 결정 구조로 치핑을 방지합니다. 이는 또한 인성을 향상하고 내마모성을 높입니다.
지금 다운로드KCP25C Application Data Cover



이제 애플리케이션 데이터를 사용할 수 있습니다!

지금 다운로드
필터 선택
필터
필터
    • 적용된 필터:
    • 모든 필터 지우기
  • X Search: kcp25c
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (4802)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4802)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4802)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(4802)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(4802)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(4802)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(4802)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4802)
  • M Stainless Steel (3069)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3069)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3069)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3069)
  • K Cast Iron (3054)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3047)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3028)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2911)
  • N Non-Ferrous Materials (1907)
    • N1
      Wrought Aluminum (1813)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1829)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%(457)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (1907)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1850)
    • N6
      Carbon, Graphite Composites, CFRP (1672)
    • N7
      MMC's (667)
  • S High-Temp Alloys (2962)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2919)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2958)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2919)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2631)
  • H Hardened Materials (1215)
    • H1
      Hardened Materials 44-48 HRC(1215)
    • H2
      Hardened Materials 48-55 HRC(1209)
    • H3
      Hardened Materials 56-60 HRC(956)
    • H4
      Hardened Materials >60 HRC(700)
  • C CFRP Materials (18)
    • C1
      CFRP, CFRP / CFRP (18)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (18)
1차 선택 선택
  • BR (112)
  • CN (642)
  • DE (691)
  • GB (444)
  • IN (318)
  • SG (312)
  • US (661)
Applications
Applications
  • Back BoringBack Boring (294)
  • BoringBoring (798)
  • CRT ProfilingCRT Profiling (2)
  • Chamfer TurningChamfer Turning (53)
  • Cut-OffCut-Off (503)
  • Deep GroovingDeep Grooving (22)
  • Face GroovingFace Grooving (1142)
  • FacingFacing (982)
  • GroovingGrooving (1249)
  • ID FacingID Facing (489)
  • ID GroovingID Grooving (914)
  • ID Thread TurningID Thread Turning (10)
  • Multiple Direction CuttingMultiple Direction Cutting (671)
  • OD Thread TurningOD Thread Turning (39)
  • Plunge TurningPlunge Turning (899)
  • ProfilingProfiling (808)
  • TRN BoringTRN Boring (207)
  • ThreadingThreading (37)
  • TurningTurning (1371)
Type of Thread
Type of Thread
  • 60 (40)
  • ACME (37)
  • API (34)
  • API RD (23)
  • BSW (22)
  • BUTTRESS (40)
  • M (12)
  • NPT (22)
  • STUB ACME (22)
  • UN (40)
  • UNJ (22)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (3339)
  • Lightly Interrupted Cut (4337)
  • Smooth Cut (5609)
  • Varying Depth of Cut (4108)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (88)
  • 50.0 (5)
  • 60.0 (9)
  • 62.5 (8)
  • 63.0 (8)
  • 72.5 (8)
  • 75.0 (106)
  • 85.0 (7)
  • 90.0 (565)
  • 90.25 (2)
  • 92.0 (2)
  • 93.0 (145)
  • 95.0 (211)
  • 97.5 (1)
  • 107.5 (27)
  • 117.5 (8)
Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (40)
  • Boring Bar Shank (202)
  • Cutoff Support Blade A1-A3 (21)
  • KM (45)
  • Toolholder (829)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (11)
  • 1.0 (1323)
  • 2.0 (2462)
  • 3.0 (369)
  • 4.0 (1671)
  • 6.0 (441)
  • 8.0 (1181)
Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 17.138 mm(6)
  • 17.638 mm(12)
  • 18.638 mm(2)
  • 20.0 mm(2)
  • 24.638 mm(2)
  • 25.0 mm(3)
  • 25.638 mm(2)
  • 26.638 mm(2)
  • 41.275 mm(12)
  • 41.28 mm(1)
  • 42.638 mm(4)
  • 50.0 mm(18)
  • 50.08 mm(2)
  • 53.62 mm(5)
  • 54.75 mm(4)
  • 55.0 mm(1)
  • 55.62 mm(2)
  • 59.5 mm(1)
  • 59.62 mm(5)
  • 59.75 mm(1)
  • 60.0 mm(20)
  • 61.75 mm(1)
  • 67.75 mm(2)
  • 70.0 mm(19)
  • 76.2 mm(3)
  • 80.0 mm(5)
  • 82.55 mm(1)
  • 86.0 mm(1)
  • 88.9 mm(2)
  • 90.0 mm(6)
  • 99.5 mm(2)
  • 100.0 mm(3)
  • 101.6 mm(11)
  • 105.0 mm(2)
  • 105.5 mm(2)
  • 107.0 mm(2)
  • 108.0 mm(2)
  • 109.0 mm(6)
  • 110.0 mm(2)
  • 110.25 mm(6)
  • 114.3 mm(14)
  • 115.0 mm(2)
  • 116.0 mm(2)
  • 121.0 mm(2)
  • 125.0 mm(4)
  • 125.25 mm(4)
  • 127.0 mm(11)
  • 138.75 mm(2)
  • 140.0 mm(1)
  • 141.5 mm(2)
  • 141.69 mm(2)
  • 149.99 mm(1)
  • 150.0 mm(424)
  • 150.15 mm(1)
  • 150.245 mm(1)
  • 150.248 mm(1)
  • 150.25 mm(9)
  • 150.251 mm(1)
  • 150.3 mm(5)
  • 151.25 mm(3)
  • 152.4 mm(253)
  • 161.69 mm(4)
  • 169.99 mm(2)
  • 170.0 mm(96)
  • 171.25 mm(4)
  • 177.8 mm(6)
  • 180.0 mm(7)
  • 200.0 mm(49)
  • 200.01 mm(1)
  • 201.45 mm(3)
  • 203.2 mm(9)
  • 250.0 mm(11)
  • 254.0 mm(10)
  • 254.5 mm(3)
  • 254.6 mm(1)
  • 300.0 mm(25)
  • 304.8 mm(23)
  • 355.6 mm(38)
  • 357.38 mm(1)
  • 393.705 mm(1)
  • 400.0 mm(1)
  • 406.4 mm(3)
  • 412.75 mm(1)
  • 546.1 mm(1)
Over All Length [L] Min받는 사람Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 mm(79)
  • 0.025 mm(44)
  • 0.05 mm(87)
  • 0.075 mm(61)
  • 0.1 mm(432)
  • 0.125 mm(32)
  • 0.15 mm(56)
  • 0.175 mm(98)
  • 0.2 mm(1150)
  • 0.225 mm(22)
  • 0.25 mm(37)
  • 0.275 mm(12)
  • 0.3 mm(173)
  • 0.325 mm(71)
  • 0.35 mm(64)
  • 0.375 mm(35)
  • 0.4 mm(1923)
  • 0.45 mm(29)
  • 0.475 mm(12)
  • 0.5 mm(103)
  • 0.575 mm(94)
  • 0.6 mm(28)
  • 0.75 mm(3)
  • 0.775 mm(41)
  • 0.8 mm(2512)
  • 0.825 mm(4)
  • 0.9 mm(34)
  • 1.0 mm(77)
  • 1.05 mm(30)
  • 1.075 mm(10)
  • 1.175 mm(8)
  • 1.2 mm(1538)
  • 1.225 mm(10)
  • 1.25 mm(3)
  • 1.5 mm(90)
  • 1.55 mm(60)
  • 1.575 mm(81)
  • 1.6 mm(895)
  • 1.65 mm(51)
  • 1.75 mm(3)
  • 1.975 mm(24)
  • 2.0 mm(83)
  • 2.05 mm(18)
  • 2.075 mm(50)
  • 2.375 mm(108)
  • 2.4 mm(254)
  • 2.45 mm(49)
  • 2.5 mm(82)
  • 2.525 mm(18)
  • 2.55 mm(55)
  • 2.575 mm(81)
  • 3.0 mm(66)
  • 3.025 mm(18)
  • 3.05 mm(40)
  • 3.075 mm(68)
  • 3.175 mm(115)
  • 3.2 mm(55)
  • 3.25 mm(44)
  • 3.95 mm(11)
  • 3.975 mm(9)
  • 4.0 mm(52)
  • 4.025 mm(19)
  • 4.075 mm(26)
  • 4.775 mm(35)
  • 5.0 mm(26)
  • 5.025 mm(8)
  • 5.075 mm(11)
  • 6.0 mm(23)
  • 6.35 mm(63)
  • 7.95 mm(6)
  • 8.0 mm(13)
  • 9.525 mm(11)
  • 10.0 mm(13)
  • 12.5 mm(20)
  • 12.7 mm(12)
  • 16.0 mm(9)
Corner Radius Min받는 사람Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm(5294)
Corner Chamfer Min받는 사람Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (14)
  • 241 (5)
  • AC5 (13)
  • CG5 (10)
  • CL4 (8)
  • CM2 (14)
  • CM3 (8)
  • CM4 (8)
  • CPX (12)
  • CW2 (8)
  • CW2015 (16)
  • CW3020 (13)
  • CW5025 (20)
  • GX (5)
  • HT2 (5)
  • HTX (8)
  • K00326 (11)
  • K00379 (15)
  • K060 (81)
  • K090 (63)
  • K1 (13)
  • K10M (16)
  • K10P (16)
  • K10U (18)
  • K15U (18)
  • K20K (16)
  • K21 (8)
  • K25M (16)
  • K25P (16)
  • K313 (951)
  • K35P (9)
  • K420 (55)
  • K45 (14)
  • K68 (565)
  • K8735 (11)
  • KB1340 (167)
  • KB1345 (165)
  • KB1610 (251)
  • KB1625 (14)
  • KB1630 (342)
  • KB5610 (179)
  • KB5625 (14)
  • KB5630 (202)
  • KB9610 (16)
  • KB9640 (45)
  • KBH10 (307)
  • KBH10B (345)
  • KBH20 (419)
  • KBH20B (362)
  • KBK35 (5)
  • KBK45 (37)
  • KC210 (9)
  • KC250 (9)
  • KC5010 (929)
  • KC5020P (4)
  • KC5025 (680)
  • KC5115RR (1)
  • KC5125RR (1)
  • KC5410 (433)
  • KC5510 (16)
  • KC5525 (11)
  • KC710 (5)
  • KC720 (58)
  • KC722 (5)
  • KC725M (2)
  • KC730 (683)
  • KC7310 (18)
  • KC732 (18)
  • KC8050 (18)
  • KC810 (18)
  • KC850 (699)
  • KC9010 (16)
  • KC9025 (18)
  • KC910 (18)
  • KC9105 (16)
  • KC9110 (23)
  • KC9115RR (1)
  • KC9120 (18)
  • KC9125 (29)
  • KC9125RR (1)
  • KC9140 (18)
  • KC9145 (15)
  • KC9215 (16)
  • KC9225 (16)
  • KC9240 (16)
  • KC9240NEW (16)
  • KC9245 (16)
  • KC9315 (16)
  • KC9320 (18)
  • KC9325 (16)
  • KC935 (18)
  • KC950 (18)
  • KC990 (18)
  • KCD25 (4)
  • KCK05 (398)
  • KCK05B (203)
  • KCK15 (458)
  • KCK15B (561)
  • KCK20 (608)
  • KCK20B (709)
  • KCM15 (410)
  • KCM15B (457)
  • KCM25 (589)
  • KCM25B (588)
  • KCM25S (28)
  • KCM35 (413)
  • KCM35B (402)
  • KCP05 (407)
  • KCP05B (320)
  • KCP10 (872)
  • KCP10B (1192)
  • KCP10C (106)
  • KCP15 (15)
  • KCP20S (28)
  • KCP25 (905)
  • KCP25B (1282)
  • KCP25C (1657)
  • KCP30 (541)
  • KCP30B (332)
  • KCP40 (380)
  • KCP40B (414)
  • KCPK05 (367)
  • KCPK30 (2)
  • KCS10 (235)
  • KCS10B (694)
  • KCS25S (28)
  • KCU10 (1139)
  • KCU10B (1186)
  • KCU25 (1747)
  • KCU25B (992)
  • KD050 (14)
  • KD081 (14)
  • KD100 (13)
  • KD120 (16)
  • KD1400 (257)
  • KD1405 (211)
  • KD1425 (411)
  • KM1 (8)
  • KMF (48)
  • KMS (10)
  • KN10S (32)
  • KS15 (85)
  • KT1120 (5)
  • KT125 (57)
  • KT150 (16)
  • KT175 (16)
  • KT315 (508)
  • KT325 (130)
  • KT5020 (5)
  • KTP10 (350)
  • KTP25S (264)
  • KU10T (16)
  • KU30T (18)
  • KY1310 (14)
  • KY1320 (16)
  • KY1540 (171)
  • KY1615 (154)
  • KY2000 (12)
  • KY2100 (9)
  • KY3000 (14)
  • KY3400 (16)
  • KY3500 (550)
  • KY4000 (7)
  • KY4300 (234)
  • KY4400 (420)
  • KYHK15B (534)
  • KYK10 (205)
  • KYK25 (299)
  • KYK35 (16)
  • KYS25 (206)
  • KYS30 (311)
  • MC3 (19)
  • NL200 (5)
  • NL250 (16)
  • NL300 (8)
  • NL400 (7)
  • NL920 (14)
  • P25 (5)
  • PB100 (1)
  • PB250 (2)
  • PS5 (5)
  • SP0819 (10)
  • SP3019 (10)
  • SP4019 (102)
  • SP4036 (2)
  • SP4093 (2)
  • THM (11)
  • THM-X (3)
  • THMF-X (1)
  • TN10P (1)
  • TN10U (3)
  • TN15M (1)
  • TN15U (1)
  • TN2000 (3)
  • TN20K (3)
  • TN20P (3)
  • TN30M (1)
  • TN30P (6)
  • TN4000 (1)
  • TN6010 (1)
  • TN7035 (3)
  • TTM09 (3)
  • TTS (4)
  • W00162 (6)
  • WBH10P (1)
  • WBH10U (11)
  • WBH20P (3)
  • WBH30P (17)
  • WBK45U (2)
  • WDN00U (8)
  • WDN25U (7)
  • WK05CT (1)
  • WK15CT (3)
  • WK20CT (16)
  • WM15CT (1)
  • WM25CT (14)
  • WM35CT (1)
  • WP05CT (1)
  • WP15CT (29)
  • WP25CT (29)
  • WP35CT (11)
  • WS10PT (3)
  • WS25PT (1)
  • WU05PT (2)
  • WU10HT (3)
  • WU10PT (3)
  • WU25PT (3)
  • X00511 (5)
  • X00580 (74)
  • X00581 (74)
  • X00582 (74)
  • X00583 (74)
  • X00584 (74)
  • X00585 (74)
  • X00586 (74)
  • X00591 (74)
  • X00592 (74)
  • X00593 (74)
  • X00594 (74)
  • X00596 (74)
  • X00597 (74)
  • X00599 (74)
  • YY87EL (43)
Hand Of Tool
Hand Of Tool
  • L (476)
  • N (88)
  • R (591)
Wiper Insert
Wiper Insert
  • N (6193)
  • Y (455)
F Dimension
F Dimension
  • 0.0 mm(1)
  • 1.825 mm(3)
  • 2.7 mm(1)
  • 3.61 mm(1)
  • 3.63 mm(1)
  • 3.68 mm(6)
  • 3.7 mm(1)
  • 3.86 mm(3)
  • 3.96 mm(7)
  • 5.475 mm(4)
  • 5.975 mm(4)
  • 6.35 mm(2)
  • 7.0 mm(2)
  • 7.92 mm(4)
  • 7.924 mm(1)
  • 7.925 mm(2)
  • 9.0 mm(4)
  • 9.525 mm(2)
  • 9.959 mm(1)
  • 10.0 mm(1)
  • 10.31 mm(2)
  • 10.312 mm(2)
  • 11.0 mm(5)
  • 11.684 mm(1)
  • 12.0 mm(8)
  • 12.23 mm(1)
  • 12.25 mm(1)
  • 12.5 mm(23)
  • 12.598 mm(2)
  • 12.7 mm(12)
  • 12.701 mm(1)
  • 12.73 mm(3)
  • 12.75 mm(4)
  • 13.0 mm(11)
  • 13.106 mm(1)
  • 13.767 mm(1)
  • 14.418 mm(1)
  • 15.494 mm(1)
  • 15.773 mm(2)
  • 15.799 mm(1)
  • 15.87 mm(1)
  • 15.875 mm(7)
  • 15.88 mm(3)
  • 16.0 mm(6)
  • 16.125 mm(2)
  • 16.256 mm(2)
  • 16.26 mm(3)
  • 16.5 mm(2)
  • 17.0 mm(84)
  • 17.3 mm(2)
  • 17.5 mm(4)
  • 17.78 mm(1)
  • 18.5 mm(2)
  • 19.05 mm(5)
  • 19.167 mm(1)
  • 19.43 mm(10)
  • 19.431 mm(21)
  • 19.44 mm(1)
  • 19.863 mm(1)
  • 19.866 mm(2)
  • 20.0 mm(1)
  • 20.167 mm(1)
  • 20.3 mm(6)
  • 20.5 mm(2)
  • 20.638 mm(1)
  • 21.0 mm(1)
  • 21.13 mm(4)
  • 21.77 mm(1)
  • 21.8 mm(1)
  • 21.875 mm(1)
  • 22.0 mm(22)
  • 22.225 mm(3)
  • 22.605 mm(1)
  • 22.606 mm(3)
  • 22.61 mm(4)
  • 23.7 mm(1)
  • 25.0 mm(1)
  • 25.06 mm(16)
  • 25.11 mm(32)
  • 25.147 mm(2)
  • 25.18 mm(26)
  • 25.182 mm(2)
  • 25.183 mm(3)
  • 25.184 mm(5)
  • 25.185 mm(12)
  • 25.19 mm(18)
  • 25.197 mm(2)
  • 25.2 mm(8)
  • 25.204 mm(2)
  • 25.206 mm(1)
  • 25.21 mm(26)
  • 25.2106 mm(1)
  • 25.3 mm(4)
  • 25.335 mm(2)
  • 25.34 mm(2)
  • 25.36 mm(1)
  • 25.4 mm(36)
  • 25.5 mm(4)
  • 25.77 mm(1)
  • 25.875 mm(1)
  • 26.62 mm(2)
  • 26.924 mm(2)
  • 27.0 mm(12)
  • 27.381 mm(2)
  • 28.45 mm(1)
  • 28.575 mm(1)
  • 28.58 mm(4)
  • 29.718 mm(2)
  • 29.72 mm(2)
  • 30.0 mm(1)
  • 30.4 mm(1)
  • 31.75 mm(32)
  • 31.826 mm(2)
  • 31.83 mm(12)
  • 31.91 mm(8)
  • 31.93 mm(7)
  • 31.934 mm(1)
  • 31.935 mm(2)
  • 32.0 mm(290)
  • 32.06 mm(4)
  • 32.156 mm(2)
  • 32.25 mm(2)
  • 32.258 mm(6)
  • 32.26 mm(2)
  • 32.276 mm(1)
  • 32.41 mm(2)
  • 32.5 mm(1)
  • 32.537 mm(2)
  • 32.54 mm(3)
  • 32.563 mm(2)
  • 33.1 mm(1)
  • 33.55 mm(2)
  • 34.366 mm(2)
  • 35.0 mm(7)
  • 35.006 mm(1)
  • 35.1 mm(1)
  • 38.0 mm(6)
  • 38.1 mm(99)
  • 38.125 mm(3)
  • 38.13 mm(1)
  • 38.9 mm(1)
  • 40.0 mm(2)
  • 40.1 mm(2)
  • 43.0 mm(4)
  • 44.45 mm(1)
  • 47.625 mm(1)
  • 48.0 mm(4)
  • 50.0 mm(2)
  • 50.8 mm(7)
  • 53.0 mm(4)
  • 57.15 mm(1)
F Dimension Min받는 사람F Dimension Max
Minimum Bore Diameter
Minimum Bore Diameter
  • 7.24 mm(8)
  • 7.42 mm(3)
  • 7.52 mm(5)
  • 8.15 mm(2)
  • 12.19 mm(2)
  • 13.0 mm(2)
  • 15.24 mm(6)
  • 16.0 mm(4)
  • 19.558 mm(2)
  • 19.56 mm(2)
  • 20.0 mm(5)
  • 23.62 mm(4)
  • 23.622 mm(4)
  • 25.0 mm(10)
  • 26.0 mm(5)
  • 26.924 mm(1)
  • 30.0 mm(2)
  • 30.48 mm(3)
  • 30.99 mm(2)
  • 31.75 mm(2)
  • 32.0 mm(80)
  • 33.0 mm(10)
  • 34.0 mm(4)
  • 37.0 mm(3)
  • 37.338 mm(11)
  • 37.34 mm(11)
  • 37.388 mm(3)
  • 38.1 mm(4)
  • 39.37 mm(3)
  • 40.0 mm(8)
  • 43.307 mm(19)
  • 43.31 mm(7)
  • 44.0 mm(2)
  • 44.45 mm(2)
  • 44.7 mm(3)
  • 44.704 mm(3)
  • 45.06 mm(1)
  • 46.48 mm(1)
  • 47.625 mm(2)
  • 48.0 mm(1)
  • 50.0 mm(1)
  • 55.0 mm(6)
  • 57.15 mm(1)
  • 59.0 mm(2)
  • 60.96 mm(2)
  • 65.0 mm(1)
  • 76.2 mm(1)
  • 106.0 mm(2)
Minimum Bore Diameter Min받는 사람Minimum Bore Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm(35)
  • 7.24 mm(8)
  • 7.42 mm(3)
  • 7.52 mm(5)
  • 8.15 mm(2)
  • 12.19 mm(2)
  • 13.0 mm(2)
  • 15.24 mm(6)
  • 16.0 mm(4)
  • 19.558 mm(2)
  • 19.56 mm(2)
  • 20.0 mm(5)
  • 23.62 mm(4)
  • 23.622 mm(4)
  • 25.0 mm(10)
  • 26.0 mm(7)
  • 26.924 mm(1)
  • 28.0 mm(1)
  • 30.0 mm(4)
  • 30.48 mm(3)
  • 30.99 mm(2)
  • 31.75 mm(2)
  • 32.0 mm(80)
  • 33.0 mm(10)
  • 34.0 mm(4)
  • 37.0 mm(3)
  • 37.338 mm(11)
  • 37.34 mm(11)
  • 37.388 mm(3)
  • 38.1 mm(4)
  • 39.37 mm(3)
  • 40.0 mm(12)
  • 41.3 mm(17)
  • 43.307 mm(19)
  • 43.31 mm(7)
  • 44.0 mm(2)
  • 44.45 mm(2)
  • 44.7 mm(3)
  • 44.704 mm(3)
  • 45.06 mm(1)
  • 46.48 mm(1)
  • 47.6 mm(17)
  • 47.625 mm(2)
  • 48.0 mm(1)
  • 50.0 mm(6)
  • 55.0 mm(6)
  • 56.625 mm(6)
  • 57.15 mm(1)
  • 57.2 mm(11)
  • 59.0 mm(2)
  • 60.0 mm(12)
  • 60.96 mm(2)
  • 63.5 mm(6)
  • 65.0 mm(1)
  • 70.0 mm(4)
  • 75.0 mm(13)
  • 76.2 mm(5)
  • 80.0 mm(6)
  • 86.0 mm(5)
  • 88.9 mm(157)
  • 90.0 mm(1)
  • 100.0 mm(21)
  • 106.0 mm(5)
  • 120.0 mm(2)
  • 127.0 mm(1)
  • 139.7 mm(175)
  • 146.05 mm(2)
  • 150.0 mm(1)
  • 174.6 mm(28)
  • 180.0 mm(20)
  • 209.6 mm(74)
  • 222.3 mm(16)
  • 250.0 mm(18)
  • 333.0 mm(3)
  • 350.0 mm(21)
Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 30.0 mm(4)
  • 35.0 mm(4)
  • 36.0 mm(3)
  • 38.0 mm(1)
  • 42.0 mm(4)
  • 52.0 mm(2)
  • 60.0 mm(6)
  • 62.0 mm(11)
  • 63.0 mm(2)
  • 64.0 mm(6)
  • 66.0 mm(4)
  • 75.0 mm(10)
  • 80.0 mm(4)
  • 82.0 mm(2)
  • 100.0 mm(13)
  • 180.0 mm(18)
  • 250.0 mm(20)
  • 350.0 mm(18)
  • 999.0 mm(21)
  • 9999.0 mm(476)
Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
Countersunk Angle
Countersunk Angle
  • 20.0 (3)
  • 45.0 (2)
Countersunk Angle Min받는 사람Countersunk Angle Max
Cutting Direction
Cutting Direction
  • B (257)
  • E (522)
  • P (2)
  • S (374)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (408)
  • DOUBLE POSITIVE (20)
  • NEGATIVE-ZERO (192)
  • NEUTRAL (ZERO) (185)
  • POSITIVE-NEGATIVE (29)
  • POSITIVE-ZERO (162)
Maximum Bore Depth
Maximum Bore Depth
  • 17.138 mm(6)
  • 25.4 mm(8)
  • 35.16 mm(1)
  • 36.33 mm(1)
  • 38.04 mm(3)
  • 38.08 mm(2)
  • 38.1 mm(9)
  • 40.0 mm(4)
  • 40.28 mm(2)
  • 42.21 mm(2)
  • 42.638 mm(4)
  • 43.21 mm(2)
  • 50.0 mm(16)
  • 50.3 mm(4)
  • 50.8 mm(19)
  • 55.09 mm(1)
  • 56.0 mm(2)
  • 56.11 mm(2)
  • 58.0 mm(1)
  • 60.0 mm(6)
  • 63.4 mm(2)
  • 63.48 mm(1)
  • 63.5 mm(2)
  • 63.74 mm(1)
  • 64.0 mm(4)
  • 70.0 mm(8)
  • 70.02 mm(2)
  • 75.04 mm(2)
  • 76.0 mm(1)
  • 76.2 mm(6)
  • 80.0 mm(1)
  • 88.23 mm(1)
  • 88.9 mm(1)
  • 95.25 mm(1)
  • 100.0 mm(81)
  • 101.6 mm(4)
  • 114.3 mm(3)
  • 117.14 mm(1)
  • 126.8 mm(14)
  • 127.0 mm(31)
  • 128.0 mm(5)
  • 152.4 mm(9)
  • 160.0 mm(5)
  • 203.2 mm(5)
  • 228.6 mm(1)
  • 317.5 mm(18)
Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (19)
  • S (249)
frontEnd
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (6)
  • SQUARE SHANK ADAPTER (8)
Clamp Style
Clamp Style
  • C (218)
  • D (81)
  • M (229)
  • N (106)
  • P (95)
  • S (126)
  • T (15)
  • X (31)
  • Y (299)
Cutting Width
Cutting Width
  • 0.5 mm(10)
  • 0.762 mm(2)
  • 0.787 mm(15)
  • 0.8 mm(12)
  • 0.889 mm(3)
  • 0.991 mm(6)
  • 1.0 mm(40)
  • 1.041 mm(8)
  • 1.19 mm(22)
  • 1.194 mm(39)
  • 1.2 mm(38)
  • 1.39 mm(8)
  • 1.397 mm(3)
  • 1.4 mm(28)
  • 1.473 mm(8)
  • 1.49 mm(2)
  • 1.5 mm(47)
  • 1.524 mm(2)
  • 1.55 mm(1)
  • 1.57 mm(31)
  • 1.575 mm(48)
  • 1.6 mm(13)
  • 1.69 mm(3)
  • 1.7 mm(12)
  • 1.702 mm(6)
  • 1.75 mm(36)
  • 1.829 mm(28)
  • 1.94 mm(4)
  • 1.95 mm(12)
  • 1.956 mm(3)
  • 1.981 mm(28)
  • 1.99 mm(12)
  • 2.0 mm(110)
  • 2.007 mm(6)
  • 2.12 mm(30)
  • 2.125 mm(42)
  • 2.13 mm(17)
  • 2.2 mm(49)
  • 2.235 mm(27)
  • 2.236 mm(15)
  • 2.24 mm(8)
  • 2.25 mm(24)
  • 2.38 mm(1)
  • 2.387 mm(43)
  • 2.388 mm(82)
  • 2.39 mm(12)
  • 2.464 mm(24)
  • 2.49 mm(2)
  • 2.5 mm(43)
  • 2.51 mm(28)
  • 2.511 mm(29)
  • 2.62 mm(1)
  • 2.667 mm(24)
  • 2.74 mm(3)
  • 2.743 mm(3)
  • 2.75 mm(39)
  • 2.794 mm(24)
  • 2.997 mm(25)
  • 3.0 mm(161)
  • 3.05 mm(15)
  • 3.099 mm(24)
  • 3.1 mm(16)
  • 3.11 mm(21)
  • 3.12 mm(27)
  • 3.125 mm(63)
  • 3.13 mm(21)
  • 3.17 mm(24)
  • 3.175 mm(160)
  • 3.177 mm(47)
  • 3.18 mm(20)
  • 3.2 mm(34)
  • 3.245 mm(10)
  • 3.25 mm(26)
  • 3.251 mm(12)
  • 3.27 mm(3)
  • 3.3 mm(48)
  • 3.301 mm(52)
  • 3.302 mm(55)
  • 3.32 mm(12)
  • 3.5 mm(45)
  • 3.607 mm(24)
  • 3.81 mm(5)
  • 3.82 mm(4)
  • 3.835 mm(3)
  • 3.84 mm(6)
  • 3.96 mm(27)
  • 3.962 mm(28)
  • 3.974 mm(12)
  • 3.988 mm(22)
  • 4.0 mm(141)
  • 4.05 mm(4)
  • 4.094 mm(46)
  • 4.1 mm(23)
  • 4.11 mm(18)
  • 4.12 mm(35)
  • 4.125 mm(62)
  • 4.242 mm(12)
  • 4.25 mm(27)
  • 4.5 mm(41)
  • 4.521 mm(23)
  • 4.699 mm(23)
  • 4.75 mm(51)
  • 4.76 mm(62)
  • 4.762 mm(63)
  • 4.763 mm(46)
  • 4.775 mm(39)
  • 4.78 mm(7)
  • 4.785 mm(8)
  • 4.788 mm(6)
  • 4.8 mm(24)
  • 4.801 mm(56)
  • 4.873 mm(44)
  • 4.877 mm(58)
  • 4.878 mm(47)
  • 4.88 mm(13)
  • 4.95 mm(24)
  • 4.953 mm(13)
  • 4.978 mm(22)
  • 5.0 mm(111)
  • 5.004 mm(5)
  • 5.1 mm(22)
  • 5.12 mm(27)
  • 5.125 mm(94)
  • 5.13 mm(27)
  • 5.41 mm(13)
  • 5.5 mm(15)
  • 6.0 mm(90)
  • 6.12 mm(27)
  • 6.125 mm(78)
  • 6.13 mm(27)
  • 6.346 mm(40)
  • 6.35 mm(105)
  • 6.36 mm(6)
  • 6.477 mm(47)
  • 6.478 mm(45)
  • 6.502 mm(12)
  • 7.0 mm(43)
  • 7.125 mm(43)
  • 7.137 mm(1)
  • 7.317 mm(40)
  • 7.92 mm(9)
  • 7.925 mm(15)
  • 7.937 mm(10)
  • 7.938 mm(9)
  • 7.94 mm(10)
  • 8.0 mm(30)
  • 8.051 mm(9)
  • 8.052 mm(12)
  • 8.125 mm(36)
  • 8.13 mm(22)
  • 9.525 mm(14)
  • 9.53 mm(9)
  • 9.651 mm(2)
  • 9.677 mm(2)
  • 9.754 mm(3)
  • 10.0 mm(14)
  • 10.125 mm(18)
  • 10.13 mm(17)
Cutting Width Min받는 사람Cutting Width Max
Front End Type
Front End Type
  • MCS - Modular Cartridge System (6)
  • VKT - Square Shank (8)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2555)
  • D-DIAMOND/RHOMBIC 55 (568)
  • E-DIAMOND/RHOMBIC 75 (1)
  • FIX-PERFECT 2 CUT EDGES (58)
  • FIX-PERFECT 4 CUT EDGES (11)
  • FIX-PERFECT 8 CUT EDGES (69)
  • G-RHOMBIC 45 (2)
  • GROOVING/CUTOFF MISC (2)
  • L-RECTANGLE 90 (4)
  • L-RECTANGLE ON EDGE 90 (16)
  • LAY DOWN MISC (1)
  • N/K-PARALLELOGRAM 55 (59)
  • PRISMATIC (951)
  • R-ROUND (242)
  • S-SQUARE 90 (449)
  • T-TRIANGLE 60 (553)
  • THREADING (1)
  • TN-TOP NOTCH (478)
  • V-DIAMOND/RHOMBIC 35 (266)
  • W-TRIGON 80 (198)
Cartridge Size
Cartridge Size
  • 10 - mm of Cutting Height (4)
  • 12 - mm of Cutting Height (1)
  • 20 - mm of Cutting Height (1)
  • 50 (17)
  • 65 (18)
Front End Style
Front End Style
  • MCS01 Modular Deep Grooving (6)
  • VKT01 Std Design (8)
Insert Size
Insert Size
  • 10 (6)
  • 1F (2)
  • 2 (38)
  • 2S (1)
  • 3 (66)
  • 3S (2)
  • 4 (54)
  • 5 (64)
  • 5S (1)
  • 6 (52)
  • 8 (13)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.0 mm(14)
  • 3.51 mm(4)
  • 4.5 mm(1)
  • 4.532 mm(4)
  • 4.7 mm(1)
  • 5.0 mm(1)
  • 5.33 mm(8)
  • 5.334 mm(4)
  • 6.35 mm(5)
  • 7.0 mm(14)
  • 7.46 mm(3)
  • 7.468 mm(3)
  • 7.47 mm(3)
  • 7.62 mm(1)
  • 8.0 mm(2)
  • 8.484 mm(2)
  • 9.0 mm(1)
  • 10.0 mm(16)
  • 10.541 mm(1)
  • 10.543 mm(1)
  • 10.922 mm(2)
  • 11.0 mm(1)
  • 11.8 mm(2)
  • 12.0 mm(25)
  • 12.13 mm(2)
  • 12.7 mm(3)
  • 12.72 mm(2)
  • 13.919 mm(1)
  • 14.0 mm(10)
  • 16.0 mm(51)
  • 17.0 mm(12)
  • 19.0 mm(4)
  • 19.05 mm(6)
  • 20.0 mm(27)
  • 21.387 mm(1)
  • 22.0 mm(6)
  • 24.0 mm(2)
  • 25.0 mm(4)
  • 25.4 mm(8)
  • 25.908 mm(2)
  • 25.999 mm(5)
  • 26.0 mm(84)
  • 28.702 mm(1)
  • 29.0 mm(1)
  • 31.75 mm(3)
  • 32.0 mm(32)
  • 33.0 mm(6)
  • 35.051 mm(1)
  • 35.052 mm(4)
  • 38.0 mm(2)
  • 38.1 mm(4)
  • 40.0 mm(6)
  • 47.625 mm(1)
  • 50.0 mm(5)
  • 59.004 mm(1)
  • 60.0 mm(5)
  • 60.046 mm(1)
  • 78.0 mm(1)
Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
Thread TPI
Thread TPI
  • 24.0 (2)
Thread TPI Min받는 사람Thread TPI Max
Gage Length
Gage Length
  • 38.0000 mm(2)
  • 43.0000 mm(2)
  • 47.0000 mm(2)
  • 138.1500 mm(2)
  • 138.7500 mm(2)
  • 139.2500 mm(2)
  • 150.0000 mm(2)
  • 201.8120 mm(1)
  • 228.6000 mm(1)
  • 254.0000 mm(2)
  • 279.4000 mm(2)
  • 355.6000 mm(1)
  • 381.0000 mm(1)
  • 409.7000 mm(1)
  • 609.6000 mm(1)
Thread Pitch
Thread Pitch
  • 2.5 mm(2)
Thread Pitch Min받는 사람Thread Pitch Max
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
  • 0.64 mm(4)
  • 0.76 mm(6)
  • 0.762 mm(44)
  • 1.0 mm(2)
  • 1.015 mm(1)
  • 1.016 mm(82)
  • 1.063 mm(2)
  • 1.09 mm(14)
  • 1.092 mm(58)
  • 1.335 mm(6)
  • 1.5 mm(2)
  • 1.56 mm(4)
  • 1.588 mm(1)
  • 1.59 mm(1)
  • 1.9 mm(3)
  • 1.97 mm(1)
  • 1.981 mm(1)
  • 2.0 mm(11)
  • 2.06 mm(4)
  • 2.38 mm(2)
  • 2.5 mm(3)
  • 2.54 mm(2)
  • 2.563 mm(4)
  • 2.75 mm(1)
  • 2.777 mm(1)
  • 2.9 mm(5)
  • 2.92 mm(18)
  • 2.921 mm(42)
  • 3.0 mm(10)
  • 3.063 mm(4)
  • 3.175 mm(2)
  • 3.3 mm(3)
  • 3.4 mm(16)
  • 3.41 mm(2)
  • 3.5 mm(11)
  • 3.51 mm(1)
  • 3.52 mm(1)
  • 3.6 mm(2)
  • 3.81 mm(17)
  • 3.84 mm(1)
  • 3.86 mm(1)
  • 4.0 mm(2)
  • 4.063 mm(4)
  • 4.1 mm(3)
  • 4.2 mm(20)
  • 4.4 mm(3)
  • 4.5 mm(9)
  • 4.74 mm(2)
  • 4.9 mm(11)
  • 5.0 mm(1)
  • 5.063 mm(3)
  • 5.9 mm(3)
  • 6.0 mm(9)
  • 6.1 mm(3)
  • 6.24 mm(1)
  • 6.4 mm(7)
  • 8.1 mm(5)
Maximum Cutting Insert Depth Min받는 사람Maximum Cutting Insert Depth Max
Minimum Groove Diameter
Minimum Groove Diameter
  • 26.0 mm(4)
  • 28.0 mm(1)
  • 30.0 mm(4)
  • 33.0 mm(2)
  • 50.0 mm(4)
  • 60.0 mm(12)
  • 70.0 mm(1)
  • 75.0 mm(12)
  • 90.0 mm(1)
  • 100.0 mm(18)
  • 120.0 mm(2)
  • 180.0 mm(20)
  • 250.0 mm(18)
  • 350.0 mm(19)
Minimum Groove Diameter Min받는 사람Minimum Groove Diameter Max
Maximum Groove Diameter
Maximum Groove Diameter
  • 30.0 mm(4)
  • 35.0 mm(4)
  • 38.0 mm(1)
  • 42.0 mm(2)
  • 60.0 mm(6)
  • 75.0 mm(10)
  • 100.0 mm(12)
  • 180.0 mm(18)
  • 250.0 mm(20)
  • 350.0 mm(18)
  • 999.0 mm(19)
Maximum Groove Diameter Min받는 사람Maximum Groove Diameter Max
insertGeometry
Shape
Shape
  • C-DIAMOND/RHOMBIC 80 (2355)
  • D-DIAMOND/RHOMBIC 55 (458)
  • FIX-PERFECT 2 CUT EDGES (49)
  • FIX-PERFECT 4 CUT EDGES (9)
  • FIX-PERFECT 8 CUT EDGES (57)
  • G-RHOMBIC 45 (2)
  • GROOVING/CUTOFF MISC (2)
  • L-RECTANGLE 90 (3)
  • L-RECTANGLE ON EDGE 90 (16)
  • LAY DOWN MISC (1)
  • N/K-PARALLELOGRAM 55 (53)
  • PRISMATIC (634)
  • R-ROUND (131)
  • S-SQUARE 90 (333)
  • T-TRIANGLE 60 (394)
  • THREADING (1)
  • TN-TOP NOTCH (433)
  • V-DIAMOND/RHOMBIC 35 (195)
  • W-TRIGON 80 (154)
Insert IC Size
Insert IC Size
  • 3.962 mm(4)
  • 3.975 mm(53)
  • 4.075 mm(5)
  • 4.775 mm(3)
  • 5.55 mm(25)
  • 6.0 mm(5)
  • 6.35 mm(509)
  • 8.0 mm(6)
  • 9.525 mm(1126)
  • 9.675 mm(1)
  • 10.0 mm(9)
  • 12.0 mm(15)
  • 12.7 mm(1598)
  • 15.875 mm(270)
  • 16.0 mm(9)
  • 19.05 mm(282)
  • 20.0 mm(13)
  • 25.0 mm(15)
  • 25.4 mm(64)
  • 32.0 mm(9)
Insert IC Size Min받는 사람Insert IC Size Max
Insert Seat Size
Insert Seat Size
  • 1 (23)
  • 10 (24)
  • 1B (16)
  • 1F (4)
  • 2 (228)
  • 2B (7)
  • 2S (4)
  • 3 (332)
  • 3S (7)
  • 4 (202)
  • 4S (3)
  • 5 (57)
  • 5S (5)
  • 6 (91)
  • 8 (64)
Cutting Edge Length
Cutting Edge Length
  • 3.258 mm(1)
  • 4.03 mm(51)
  • 4.344 mm(2)
  • 5.556 mm(1)
  • 5.61 mm(1)
  • 5.611 mm(1)
  • 5.642 mm(16)
  • 6.35 mm(1)
  • 6.448 mm(288)
  • 6.45 mm(69)
  • 6.459 mm(8)
  • 6.472 mm(9)
  • 6.515 mm(40)
  • 6.7 mm(4)
  • 6.9 mm(4)
  • 7.0 mm(2)
  • 7.036 mm(2)
  • 7.04 mm(3)
  • 7.1 mm(2)
  • 7.2 mm(4)
  • 7.3 mm(10)
  • 7.5 mm(3)
  • 7.752 mm(33)
  • 7.8 mm(1)
  • 8.6 mm(2)
  • 8.687 mm(111)
  • 8.8 mm(2)
  • 8.9 mm(7)
  • 9.3 mm(8)
  • 9.525 mm(60)
  • 9.624 mm(2)
  • 9.63 mm(6)
  • 9.67 mm(2)
  • 9.672 mm(528)
  • 10.0 mm(12)
  • 10.1 mm(1)
  • 10.5 mm(4)
  • 10.6 mm(4)
  • 10.7 mm(10)
  • 10.9 mm(2)
  • 10.999 mm(27)
  • 11.0 mm(38)
  • 11.071 mm(27)
  • 11.1 mm(1)
  • 11.597 mm(24)
  • 11.6 mm(4)
  • 11.628 mm(149)
  • 11.63 mm(4)
  • 12.208 mm(1)
  • 12.7 mm(134)
  • 12.896 mm(960)
  • 12.9 mm(5)
  • 13.6 mm(1)
  • 13.66 mm(2)
  • 13.72 mm(2)
  • 13.891 mm(1)
  • 13.9 mm(1)
  • 14.0 mm(1)
  • 14.1 mm(1)
  • 14.2 mm(2)
  • 14.5 mm(12)
  • 14.6 mm(6)
  • 14.7 mm(9)
  • 15.442 mm(11)
  • 15.5 mm(1)
  • 15.504 mm(265)
  • 15.875 mm(32)
  • 16.12 mm(202)
  • 16.498 mm(65)
  • 16.5 mm(119)
  • 16.606 mm(152)
  • 16.61 mm(2)
  • 17.5 mm(4)
  • 17.51 mm(6)
  • 19.0 mm(7)
  • 19.05 mm(70)
  • 19.344 mm(193)
  • 19.38 mm(8)
  • 21.997 mm(22)
  • 22.0 mm(70)
  • 22.142 mm(14)
  • 22.731 mm(1)
  • 22.91 mm(2)
  • 25.4 mm(38)
  • 25.792 mm(15)
  • 27.496 mm(25)
  • 30.0 mm(4)
  • 31.75 mm(1)
  • 33.0 mm(11)
Cutting Edge Length Min받는 사람Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 08 (7)
  • 1 (4)
  • 11 (5)
  • 15 (15)
  • 2 (2)
  • 20 (10)
  • 25 (2)
  • 33 (2)
  • 3J (2)
  • 76 (3)
  • 80 (1)
  • AP (1)
  • B (1)
  • CB (10)
  • CB1 (17)
  • CB2 (2)
  • CT (30)
  • FF (39)
  • FM (4)
  • FN (103)
  • FP (318)
  • FS (23)
  • FV (37)
  • FW (111)
  • HP (130)
  • K (63)
  • LF (539)
  • MF (150)
  • MG (27)
  • MN (240)
  • MP (281)
  • MR (86)
  • MS (98)
  • MT (1)
  • MV (88)
  • MW (74)
  • P (14)
  • RH (50)
  • RM (105)
  • RN (240)
  • RP (387)
  • RRF (4)
  • RRH (4)
  • RRP (8)
  • RRSM (2)
  • RW (6)
  • S-WT5 (3)
  • UF (50)
  • UN (37)
  • UP (42)
  • UPG (18)
Cutting Tool Material
Cutting Tool Material
  • B H (554)
  • B L (695)
  • C A (593)
  • C N (687)
  • D P (501)
  • H T (567)
  • H W (5991)
Tolerance Class
Tolerance Class
  • G (828)
  • H (86)
  • M (3244)
  • U (42)
backEnd
Connection Type
Connection Type
  • BORING BAR (202)
  • BORING BAR HEAD (38)
  • CUTOFF BLADE (21)
  • SERRATED FACE CONNECTION (2)
  • SQUARE SHANK (843)
  • TAPER SHANK (45)
System Size
System Size
  • KM32 (4)
  • KM32TS (2)
  • KM40TS (11)
  • KM50TS (11)
  • KM63TS (13)
  • KM80TS (8)
  • PSC50 (2)
  • VDI30 (4)
  • VDI40 (4)
Back-End Diameter
Back-End Diameter
  • 6.34 mm(3)
  • 6.35 mm(15)
  • 9.52 mm(2)
  • 12.7 mm(6)
  • 15.87 mm(1)
  • 15.875 mm(3)
  • 16.0 mm(1)
  • 19.0 mm(1)
  • 19.05 mm(7)
  • 20.0 mm(7)
  • 22.225 mm(1)
  • 25.0 mm(103)
  • 25.4 mm(8)
  • 30.0 mm(4)
  • 31.7 mm(16)
  • 31.75 mm(60)
  • 32.0 mm(11)
  • 38.1 mm(9)
  • 40.0 mm(20)
  • 50.0 mm(23)
  • 50.8 mm(5)
  • 57.15 mm(1)
  • 63.0 mm(18)
  • 63.5 mm(1)
  • 80.0 mm(12)
Back-End Diameter Min받는 사람Back-End Diameter Max
Shank Height
Shank Height
  • 7.65 mm(1)
  • 12.0 mm(2)
  • 12.7 mm(5)
  • 15.875 mm(2)
  • 16.0 mm(1)
  • 18.466 mm(1)
  • 19.05 mm(12)
  • 20.0 mm(3)
  • 21.628 mm(1)
  • 23.82 mm(14)
  • 24.816 mm(1)
  • 25.0 mm(463)
  • 25.4 mm(47)
  • 30.582 mm(1)
  • 30.82 mm(1)
  • 31.166 mm(1)
  • 31.75 mm(204)
  • 32.0 mm(125)
  • 37.516 mm(1)
  • 38.1 mm(6)
  • 40.0 mm(5)
  • 49.276 mm(1)
  • 76.2 mm(1)
Shank Height Min받는 사람Shank Height Max
Shank Width
Shank Width
  • 1.65 mm(1)
  • 2.4 mm(3)
  • 3.4 mm(2)
  • 4.4 mm(2)
  • 5.4 mm(2)
  • 7.0 mm(1)
  • 7.95 mm(10)
  • 10.0 mm(1)
  • 12.0 mm(2)
  • 12.7 mm(5)
  • 14.0 mm(1)
  • 15.875 mm(2)
  • 15.88 mm(1)
  • 16.0 mm(1)
  • 18.0 mm(1)
  • 19.05 mm(14)
  • 20.0 mm(4)
  • 21.96 mm(14)
  • 25.0 mm(560)
  • 25.01 mm(1)
  • 25.4 mm(52)
  • 28.27 mm(1)
  • 28.96 mm(1)
  • 31.75 mm(199)
  • 32.0 mm(4)
  • 38.1 mm(3)
  • 40.0 mm(3)
  • 57.15 mm(1)
Shank Width Min받는 사람Shank Width Max
No filters matching ""
선삭
    • 적용된 필터:
    • 모든 필터 지우기
  • X Search: kcp25c
외경 및 내경 선삭
(4901)

외경 및 내경 선삭

홈가공 및 절삭
(1445)

홈가공 및 절삭

프로파일링
(491)

프로파일링

철도 부품 선삭
(130)

철도 부품 선삭

절삭유 부속품
(1)

절삭유 부속품

A4G-U-GUP
(40)

A4G-U-GUP

A4R-U-GMN
(19)

A4R-U-GMN

A4G-U-GMN
(36)

A4G-U-GMN

SNMX-WT5
(2)

SNMX-WT5

CNMG-MR
(38)

CNMG-MR

CNMG-MG
(16)

CNMG-MG

RNMG
(5)

RNMG

TNMG-MR
(9)

TNMG-MR

Kenloc™ • TNMG 인서트 • 네거티브 • RP
(42)

Kenloc™ • TNMG 인서트 • 네거티브 • RP

네거티브 인서트 • VNMG-FP
(3)

네거티브 인서트 • VNMG-FP

TNMM-RM
(17)

TNMM-RM

KCGR • NPGR
(7)

KCGR • NPGR

KCGR-FP • NPGR-FP
(13)

KCGR-FP • NPGR-FP

VCMR-FP
(9)

VCMR-FP

KCGX • NPR/L
(12)

KCGX • NPR/L

CNMM-RP
(42)

CNMM-RP

문의 사항이 있으십니까?

당사의 숙련된 직원들이 귀하를 도와드릴 준비가 되어 있습니다.

추가 정보 요청
내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
Select the destination where you want to move 받는 사람.
Select the project where you want to add product(s) 받는 사람.
신제품 Folder
    • Applied Filters:
    • Clear All

A folder with the name already exists.

유효한 이름을 입력하십시오.
Product(s) successfully added to project __PROJECT_NAME__
product-image
Please adjust the following properties from

ISO 카탈로그 번호

ANSI 카탈로그 번호

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

대시보드 정보를 보려면 로그인해야 합니다.
Session expired due to inactivity, please login again
장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
항목이 장바구니에 추가되었습니다.
장바구니 보기

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO 카탈로그 번호 등급  

You are about to leave the Solution building process.

Are you sure you want to leave?

Workpiece Selection

Standard

ALL

Material

Select a Value

Hardness

--

      Hardness Scale

      --

        Permitted Groups :

        Group

        SubGroup

        Hardness (HB)

        Hardness (HRC)

        CancelOk