네거티브 스타일 인서트 • Kendex™
필터
필터
필터 보기 위치
MetricInch
Workpiece Material
Workpiece Material
- P Steel (6)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(4)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(6)
- K Cast Iron (187)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(187)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(151)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(12)
- N Non-Ferrous Materials (4)
- N1Wrought Aluminum (1)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (4)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1)
- N7MMC's (1)
- S High-Temp Alloys (175)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(85)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(175)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(85)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(4)
- H Hardened Materials (101)
- H1Hardened Materials 44-48 HRC(101)
- H2Hardened Materials 48-55 HRC(95)
- H3Hardened Materials 56-60 HRC(95)
- C CFRP Materials (1)
- C2CFRP / Aluminium CFRP / Non-Ferrous (1)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (74)
- Lightly Interrupted Cut (121)
- Smooth Cut (133)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (71)
- 4.0 (110)
- 6.0 (34)
- 8.0 (129)
받는 사람
Corner Radius
Corner Radius
- 0.016 in(8)
- 0.031 in(82)
- 0.047 in(92)
- 0.063 in(78)
- 0.079 in(2)
- 0.095 in(9)
- 0.125 in(1)
- 0.126 in(3)
- 0.188 in(10)
- 0.25 in(45)
- 0.375 in(8)
- 0.5 in(6)
받는 사람
Corner Radius
Corner Radius
- 0.4 mm(8)
- 0.8 mm(82)
- 1.201 mm(92)
- 1.6 mm(78)
- 2.0 mm(2)
- 2.401 mm(9)
- 3.176 mm(1)
- 3.2 mm(3)
- 4.775 mm(10)
- 6.351 mm(45)
- 9.525 mm(8)
- 12.701 mm(6)
받는 사람
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (1)
- K68 (3)
- KB1340 (13)
- KB9640 (11)
- KBK35 (1)
- KBK45 (23)
- KC725M (1)
- KY1540 (17)
- KY1615 (36)
- KY3500 (45)
- KY4300 (30)
- KY4400 (21)
- KYHK15B (90)
- KYK10 (7)
- KYK25 (11)
- KYS25 (9)
- KYS30 (23)
- KYSP30 (2)
Wiper Insert
Wiper Insert
- N (338)
- Y (6)
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (81)
- D-DIAMOND/RHOMBIC 55 (38)
- E-DIAMOND/RHOMBIC 75 (12)
- L-RECTANGLE 90 (2)
- R-ROUND (70)
- S-SQUARE 90 (105)
- T-TRIANGLE 60 (31)
- V-DIAMOND/RHOMBIC 35 (2)
- W-TRIGON 80 (3)
insertGeometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (81)
- D-DIAMOND/RHOMBIC 55 (38)
- E-DIAMOND/RHOMBIC 75 (12)
- L-RECTANGLE 90 (2)
- R-ROUND (70)
- S-SQUARE 90 (105)
- T-TRIANGLE 60 (31)
- V-DIAMOND/RHOMBIC 35 (2)
- W-TRIGON 80 (3)
Insert IC Size
Insert IC Size
- 6.351 mm(8)
- 9.525 mm(48)
- 10.0 mm(11)
- 12.701 mm(237)
- 15.875 mm(10)
- 19.05 mm(20)
- 25.401 mm(8)
받는 사람
Insert IC Size
Insert IC Size
- 0.25 in(8)
- 0.375 in(48)
- 0.394 in(11)
- 0.5 in(237)
- 0.625 in(10)
- 0.75 in(20)
- 1.0 in(8)
받는 사람
Cutting Edge Length
Cutting Edge Length
- 8.675 mm(3)
- 9.525 mm(14)
- 9.675 mm(2)
- 11.0 mm(7)
- 12.201 mm(11)
- 12.701 mm(70)
- 12.9 mm(75)
- 13.15 mm(12)
- 15.5 mm(27)
- 15.875 mm(7)
- 16.125 mm(3)
- 16.5 mm(20)
- 16.6 mm(2)
- 19.05 mm(12)
- 21.901 mm(1)
- 22.0 mm(4)
- 25.401 mm(2)
- 38.1 mm(2)
받는 사람
Cutting Edge Length
Cutting Edge Length
- 0.342 in(3)
- 0.375 in(14)
- 0.381 in(2)
- 0.433 in(7)
- 0.48 in(11)
- 0.5 in(70)
- 0.508 in(75)
- 0.518 in(12)
- 0.61 in(27)
- 0.625 in(7)
- 0.635 in(3)
- 0.65 in(20)
- 0.654 in(2)
- 0.75 in(12)
- 0.862 in(1)
- 0.866 in(4)
- 1.0 in(2)
- 1.5 in(2)
받는 사람
Chip Breaker CBMD
Chip Breaker CBMD
- CB (1)
- CC (1)
- E (3)
- FW (3)
- GN (4)
Cutting Tool Material
Cutting Tool Material
- B H (24)
- C A (97)
- C N (194)
- H W (28)
Tolerance Class
Tolerance Class
- G (314)
- M (30)
No filters matching ""
