환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

Beyond Evolution Inserts

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (181)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(181)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(181)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(181)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(181)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(181)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(181)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(181)
    • M Stainless Steel (133)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(133)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(133)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(133)
    • K Cast Iron (181)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(181)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(181)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(181)
    • N Non-Ferrous Materials (142)
      • N1
        Wrought Aluminum (142)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(133)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (142)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (133)
      • N6
        Carbon, Graphite Composites, CFRP (133)
    • S High-Temp Alloys (142)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(142)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(142)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(142)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(142)
    • H Hardened Materials (68)
      • H1
        Hardened Materials 44-48 HRC(68)
      • H2
        Hardened Materials 48-55 HRC(68)
    1차 선택 선택
    • CN (21)
    • DE (21)
    • GB (12)
    • IN (3)
    • SG (13)
    • US (21)
    Applications
    Applications
    • Back BoringBack Boring (162)
    • BoringBoring (162)
    • Cut-OffCut-Off (23)
    • Face GroovingFace Grooving (162)
    • FacingFacing (162)
    • GroovingGrooving (162)
    • ID FacingID Facing (162)
    • ID GroovingID Grooving (162)
    • Plunge TurningPlunge Turning (126)
    • ProfilingProfiling (159)
    • TurningTurning (162)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (63)
    • Lightly Interrupted Cut (143)
    • Smooth Cut (180)
    • Varying Depth of Cut (147)
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(2)
    • 0.031 in(2)
    • 0.039 in(4)
    • 0.041 in(11)
    • 0.047 in(6)
    • 0.06 in(5)
    • 0.061 in(13)
    • 0.063 in(9)
    • 0.065 in(10)
    • 0.079 in(5)
    • 0.081 in(13)
    • 0.094 in(9)
    • 0.096 in(11)
    • 0.098 in(5)
    • 0.1 in(13)
    • 0.119 in(5)
    • 0.12 in(13)
    • 0.125 in(11)
    • 0.128 in(7)
    • 0.156 in(10)
    • 0.157 in(5)
    • 0.158 in(8)
    • 0.159 in(13)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(2)
    • 0.8 mm(2)
    • 1.0 mm(4)
    • 1.05 mm(11)
    • 1.201 mm(6)
    • 1.5 mm(5)
    • 1.55 mm(13)
    • 1.6 mm(9)
    • 1.651 mm(10)
    • 2.0 mm(5)
    • 2.051 mm(13)
    • 2.375 mm(9)
    • 2.45 mm(11)
    • 2.5 mm(5)
    • 2.551 mm(13)
    • 3.0 mm(5)
    • 3.051 mm(13)
    • 3.176 mm(11)
    • 3.25 mm(7)
    • 3.95 mm(10)
    • 4.0 mm(5)
    • 4.025 mm(8)
    • 4.05 mm(13)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (9)
    • KCK20B (9)
    • KCP10B (17)
    • KCP25B (22)
    • KCU10 (34)
    • KCU10B (34)
    • KCU25 (37)
    • KCU25B (28)
    Countersunk Angle
    Countersunk Angle
    • 17.5 (4)
    Countersunk Angle Min받는 사람Countersunk Angle Max
    frontEnd
    Cutting Width
    Cutting Width
    • 0.079 in(4)
    • 0.084 in(11)
    • 0.094 in(6)
    • 0.119 in(5)
    • 0.123 in(13)
    • 0.125 in(9)
    • 0.13 in(10)
    • 0.157 in(5)
    • 0.161 in(2)
    • 0.162 in(13)
    • 0.187 in(9)
    • 0.192 in(11)
    • 0.197 in(5)
    • 0.202 in(13)
    • 0.237 in(5)
    • 0.241 in(13)
    • 0.25 in(11)
    • 0.255 in(7)
    • 0.289 in(2)
    • 0.312 in(10)
    • 0.315 in(5)
    • 0.317 in(8)
    • 0.32 in(13)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 2.0 mm(4)
    • 2.125 mm(11)
    • 2.375 mm(6)
    • 3.0 mm(5)
    • 3.125 mm(13)
    • 3.176 mm(9)
    • 3.301 mm(10)
    • 4.0 mm(5)
    • 4.101 mm(2)
    • 4.125 mm(13)
    • 4.75 mm(9)
    • 4.875 mm(11)
    • 5.0 mm(5)
    • 5.125 mm(13)
    • 6.0 mm(5)
    • 6.125 mm(13)
    • 6.351 mm(11)
    • 6.476 mm(7)
    • 7.325 mm(2)
    • 7.926 mm(10)
    • 8.0 mm(5)
    • 8.05 mm(8)
    • 8.125 mm(13)
    Cutting Width Min받는 사람Cutting Width Max
    insertGeometry
    Insert Seat Size
    Insert Seat Size
    • 2 (21)
    • 3 (39)
    • 4 (38)
    • 5 (18)
    • 6 (38)
    • 8 (36)
    Cutting Edge Length
    Cutting Edge Length
    • 0.25 mm(2)
    • 0.426 mm(2)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.01 in(2)
    • 0.017 in(2)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    No filters matching ""
    Beyond™ Evolution™ • 홈가공 인서트 • GUP 형상• Full R • Metric
    (35)

    Beyond™ Evolution™ • 홈가공 인서트 • GUP 형상• Full R • Metric

    Beyond™ Evolution™ • 홈가공 인서트 • GUP 형상 • Full R • 정밀 연마 • Metric
    (29)

    Beyond™ Evolution™ • 홈가공 인서트 • GUP 형상 • Full R • 정밀 연마 • Metric

    Beyond™ Evolution™ • 홈가공 인서트 • GUN 형상• Full R • Metric
    (41)

    Beyond™ Evolution™ • 홈가공 인서트 • GUN 형상• Full R • Metric

    Beyond™ Evolution™ • 홈가공 인서트 • GUP 형상• Full R • Inch
    (21)

    Beyond™ Evolution™ • 홈가공 인서트 • GUP 형상• Full R • Inch

    Beyond™ Evolution™ • 홈가공 인서트 • GUN 형상• Full R • Inch
    (40)

    Beyond™ Evolution™ • 홈가공 인서트 • GUN 형상• Full R • Inch

    Beyond™ Evolution™ • 홈가공 인서트 • GUP 형상 • Full R • 정밀 연마 • Inch
    (20)

    Beyond™ Evolution™ • 홈가공 인서트 • GUP 형상 • Full R • 정밀 연마 • Inch

    Beyond™ Evolution™ • 프로파일링 인서트 • GUP 형상
    (4)

    Beyond™ Evolution™ • 프로파일링 인서트 • GUP 형상

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?