HydroForce

For any application, providing an unparalleled combination of accuracy and clamping force.

High Performance

Universal solution for drilling and tapping.

Slim Line

For long-reach applications and narrow conditions.

Activation of the chuck is achieved by turning the piston screw, which pressurizes the hydraulic fluid and exerts force on a thin-walled membrane along the length of the clamping bore.

This highly concentric clamping force not only holds the tool shank more securely, but also produces a dampening effect that reduces vibration and helps eliminate micro-cracking on cutting edges.

HydroForce™

  • 업계에서 가장 강력한 체결력을 자랑합니다.
  • 직경은 20mm 및 32mm: 2.5x 직경 오버행에서 런아웃은 3μm 이하입니다[직경 50mm에서는 6μm].
  • 25.000 RPM에서 적절하게 균형 잡힌 G2.5로, 높은 정밀도를 제공합니다.
  • 모든 애플리케이션에 적용할 수 있도록 20, 32 및 50mm의 3가지 클램핑 보어 크기를 제공합니다.
  • 돌출부 길이가 짧고 전면 벽이 40% 더 두꺼워서 절삭 매개 변수가 높고 최적의 표면 품질을 제공합니다.
  • High-Performance 라인보다 체결력이 3배 강합니다.

리듀서 슬리브

  • 쿨런트를 밀봉하는 슬롯 구성을 사용하는 원피스 디자인입니다.
  • 최대 120bar(1,500psi) 쿨런트 압력을 견딜 수 있습니다.
  • 절삭 공구 섕크 요구 사항 공차는 h6 및 Ra ≥ 0,3μm(12μin) 표면 마감입니다.
  • 최대 붕괴 압력은 h6입니다.
자세히

유압 척 연결대

  • 유압 척 연결대는 협소한 공작 환경과 긴 리치가 필요한 애플리케이션에 적합한 솔루션입니다. 모든 드릴링 및 리밍 애플리케이션에 사용할 수 있습니다. 선반 및 다중 축 장비 공구 애플리케이션을 위해 유연한 모듈식 제품을 제공합니다.
  • 모든 유압 척에 적합합니다.
  • 3µm 이하의 탁월한 런아웃.
  • 관통 쿨런트 기능.
  • 클램핑 나사를 1개 사용하므로 쉽게 조작할 수 있습니다.
  • 유연성이 우수하여 리듀서 슬리브와 함께 사용할 수 있습니다.
  • 댐핑 효과를 추가하여 공구 수명을 연장합니다.
  • 축 공구 길이를 10mm 조정할 수 있습니다.
  • 25.000 RPM에서 적절하게 균형 잡힌 G2.5입니다.
자세히
내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
Select the destination where you want to move 받는 사람.
신제품 Folder
    • Applied Filters:
    • Clear All

product-image
Please adjust the following properties from

ISO 카탈로그 번호

ANSI 카탈로그 번호

to find similar products.

The following files are available

Please select a file to download

Models

대시보드 정보를 보려면 로그인해야 합니다.
Session expired due to inactivity, please login again
장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
항목이 장바구니에 추가되었습니다.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO 카탈로그 번호 등급  

You are about to leave the Solution building process.

Are you sure you want to leave?

Standard

ALL

Material

Select a Value

Hardness

--

Hardness Scale

--

Permitted Groups :

Group

SubGroup

Hardness (HB)

Hardness (HRC)