환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
Exit Search 솔루션으로 돌아가기

솔루션 수정

솔루션 추가

솔루션 이름:{{SolutionName}}

    유사한 제품:

    이전 | 유사하게 수정된

    GOdrill™ • 5 x D • Internal Coolant • Whistle Notch™ Shank • Metric

    GOdrill™ • 광범위한 소재 • 내부 쿨런트

    제품 번호100161434

    GOdrill™ • 5 x D • Internal Coolant • Whistle Notch™ Shank • Metric
    GOdrill™ • 5 x D • Internal Coolant • Whistle Notch™ Shank • Metric
    GOdrill™ • 5 x D • Internal Coolant • Whistle Notch™ Shank • Metric
    Open expanded view
    GOdrill™ • 5 x D • Internal Coolant • Whistle Notch™ Shank • Metric
    GOdrill™ • 5 x D • Internal Coolant • Whistle Notch™ Shank • Metric
    일반적인 표현
    모든 가격 옵션을 알아보려면 당사 영업팀에 문의하세요.

    특징 및 장점

    • GOdrill™ — Kennametal 최초의 마이크로드릴
    • 광범위한 소재에 사용 가능한 범용 SC 드릴
    • 마진 없는 디자인으로 마찰 및 열 감소 — 공구 수명 연장
    • 마이크로 드릴링을 위해 최적화된 배출구 디자인으로 드릴 중앙에서 칩이 원활하게 배출됩니다.
    • 연속 스트레이트 절삭립을 통해 마모 시작 지점을 허용하지 않으며 절삭력을 고르게 분산시켜 모든 소재에서 공구 수명을 늘리고 절삭날의 치핑을 감소시킵니다.
    • KC7325™ 재종은 폭 넓은 애플리케이션을 위해 이중으로 코팅되어 있으며, TiN의 표층은 육안으로 확인하기 어려운 작은 드릴을 더 쉽게 모니터링하기 위한 마모 지표로서의 역할을 수행합니다.
    • 드릴링드릴링
    • 드릴링: 겹판드릴링: 겹판
    • DIN 번호 6535DIN 번호 6535
    • DIN 번호 6537DIN 번호 6537
    • 드릴링 — 내부 쿨런트드릴링 — 내부 쿨런트
    • 내부 쿨런트: MQL(최소윤활가공): 드릴링내부 쿨런트: MQL(최소윤활가공): 드릴링
    • 섕크 — 원통형 Whistle Notch 2°섕크 — 원통형 Whistle Notch 2°
    • 헬릭스각: 30°헬릭스각: 30°
    공차 • Inch
    공칭 사이즈 범위D1 공차D 공차 h6
    .0394–.1181.0000/-.0006 (h8).0000/-.0002
    .1181–.2362.0000/-.0005 (h7).0000/-.0003
    .2362–.3937.0000/-.0006 (h7).0000/-.0004
    .3937–.7087.0000/-.0007 (h7).0000/-.0004
    .7087–.7874.0000/-.0008 (h7).0000/-.0005
    공차 • Metric
    공칭 사이즈 범위D1 공차D 공차 h6
    1–30,000/-0,014 (h8)0,000/-0,006
    3–60,000/-0,012 (h7)0,000/-0,008
    6–100,000/-0,015 (h7)0,000/-0,009
    10–180,000/-0,018 (h7)0,000/-0,011
    18–200,000/-0,021 (h7)0,000/-0,013

    Kennametal 솔리드 초경 드릴 치수(B* 시리즈)

    mm단형*장형*초장형**
    ØDIN 6535~3 x D~5 x D~8 x D
    D1 minD1 maxDLS minLL3L4LL3L4LL3L4
    1,0001,40042858755896581210
    1,4011,900428589658129581815
    1,9012,30042858139581814662622
    2,3012,990428581712582217663025
    3,0003,750636622014662823784033
    3,7514,750636662417743629874941
    4,7516,000636662820824435945648
    6,0017,0008367934249153431056757
    7,0018,0008367941299153431107261
    8,00110,000104089473510361491228068
    10,00112,0001245102554011871561419479
    12,00114,00014451076043124776015510891
    14,00116,000164811565451338363171121101
    16,00118,000184812373511439371185135113
    18,00120,0002050131795515310177200148124
    20,00122,0002050141866016711285217162136
    22,00125,0002556153956518412698238180150
    * D1 20mm - DIN 6537K에 따름
    * D1 20mm - 공장 표준에 따름
    **공장 표준 규격에 따름

    GOdrill™ • B05_CPG 시리즈 • KC7325™ 재종 • 내부 쿨런트 • 드릴 직경 1–20mm • Metric

    소재 그룹product data image 37344product data image 100017651
    가공 속도 vcMetric
    범위 m/min직경별 권장 이송(f)
    최소초기값최대1,02,03,04,06,08,010,012,016,020,0
    P07080115mm/r0,03–0,080,04–0,090,05–0,110,08–0,140,09–0,190,11–0,220,13–0,260,15–0,300,19–0,360,24–0,46
    170100140mm/r0,04–0,090,05–0,120,07–0,140,08–0,160,11–0,220,13–0,260,15–0,310,18–0,350,22–0,420,28–0,54
    290120140mm/r0,04–0,090,05–0,120,07–0,140,08–0,160,12–0,220,14–0,260,17–0,310,20–0,350,24–0,420,31–0,53
    36080100mm/r0,05–0,100,06–0,130,08–0,150,09–0,170,13–0,230,15–0,280,19–0,330,22–0,380,26–0,470,34–0,59
    45080100mm/r0,05–0,100,06–0,130,07–0,150,08–0,170,12–0,230,14–0,280,17–0,330,19–0,380,23–0,470,29–0,59
    5405070mm/r0,03–0,050,04–0,060,05–0,070,06–0,100,08–0,140,10–0,180,12–0,220,14–0,240,18–0,320,23–0,41
    6405070mm/r0,03–0,050,04–0,060,05–0,080,06–0,100,08–0,140,10–0,180,13–0,220,14–0,240,18–0,320,23–0,41
    M1203040mm/r0,02–0,050,03–0,060,04–0,070,05–0,090,08–0,110,09–0,120,10–0,140,12–0,160,14–0,180,16–0,20
    2304050mm/r0,02–0,060,03–0,070,04–0,080,06–0,100,08–0,120,09–0,140,10–0,160,12–0,180,14–0,200,16–0,22
    3203040mm/r0,02–0,050,03–0,060,04–0,070,05–0,090,08–0,110,09–0,120,10–0,140,12–0,160,14–0,180,16–0,20
    K180120170mm/r0,08–0,160,09–0,170,11–0,220,12–0,240,16–0,310,20–0,380,23–0,440,25–0,490,31–0,600,38–0,74
    280110140mm/r0,10–0,140,11–0,150,12–0,160,13–0,190,16–0,250,20–0,310,23–0,360,25–0,400,31–0,480,38–0,60
    380100130mm/r0,05–0,130,07–0,150,08–0,170,09–0,190,12–0,250,14–0,300,17–0,350,19–0,400,24–0,480,30–0,60
    N190230315mm/r0,05–0,120,06–0,130,08–0,140,10–0,160,12–0,200,16–0,240,20–0,280,24–0,320,28–0,400,32–0,48
    290225270mm/r0,04–0,080,06–0,120,08–0,160,10–0,200,12–0,240,16–0,280,20–0,320,24–0,360,28–0,440,32–0,52
    390180270mm/r0,10–0,130,11–0,140,12–0,140,13–0,160,14–0,200,16–0,240,20–0,280,24–0,320,28–0,400,32–0,44
    490135180mm/r0,04–0,080,06–0,120,08–0,160,10–0,200,12–0,240,16–0,280,20–0,320,24–0,360,28–0,400,32–0,48
    S1102530mm/r0,01–0,040,02–0,050,03–0,060,04–0,080,06–0,100,08–0,120,09–0,130,10–0,140,12–0,160,14–0,18
    2102025mm/r0,01–0,030,02–0,030,02–0,040,03–0,060,05–0,080,07–0,100,08–0,110,09–0,120,10–0,140,11–0,16
    3102530mm/r0,01–0,030,02–0,030,02–0,040,02–0,050,04–0,070,06–0,090,07–0,100,08–0,110,09–0,130,10–0,15
    4102540mm/r0,01–0,030,02–0,030,02–0,040,03–0,060,05–0,080,07–0,100,08–0,110,09–0,120,10–0,140,11–0,16
    H1101530mm/r0,01–0,030,02–0,030,02–0,040,03–0,060,05–0,080,07–0,100,08–0,110,09–0,120,10–0,140,11–0,16
    2101030mm/r0,01–0,030,02–0,030,02–0,040,02–0,050,04–0,070,06–0,090,07–0,100,08–0,110,09–0,130,10–0,15
    소재 그룹product data image 37344product data image 100017651
    소재 그룹가공 속도 vcInch
    범위 SFM직경별 권장 이송(f)
    최소초기값최대3/64 .0475/64 .0781/8 .1253/16 .1881/4 .2505/16 .3133/8 .3751/2 .5005/8 .6253/4 .750
    P0230260380IPR0.001–0.0030.002–0.0040.002–0.0040.003–0.0050.004–0.0070.004–0.0090.005–0.0100.006–0.0120.007–0.0140.009–0.018
    1230330460IPR0.002–0.0040.002–0.0050.003–0.0060.003–0.0060.004–0.0090.005–0.0100.006–0.0120.007–0.0140.009–0.0170.011–0.021
    2300390460IPR0.002–0.0040.002–0.0050.003–0.0060.003–0.0060.005–0.0090.006–0.0100.007–0.0120.008–0.0140.009–0.0170.012–0.021
    3200260330IPR0.002–0.0040.002–0.0050.003–0.0060.004–0.0070.005–0.0090.006–0.0110.008–0.0130.009–0.0150.010–0.0190.013–0.023
    4160260330IPR0.002–0.0040.002–0.0050.003–0.0060.003–0.0070.005–0.0090.006–0.0110.007–0.0130.008–0.0150.009–0.0190.011–0.023
    5130160230IPR0.001–0.0020.002–0.0020.002–0.0030.002–0.0040.003–0.0060.004–0.0070.005–0.0090.006–0.0090.007–0.0130.009–0.016
    6130160230IPR0.001–0.0020.002–0.0020.002–0.0030.002–0.0040.003–0.0060.004–0.0070.005–0.0090.006–0.0090.007–0.0130.009–0.016
    M170100130IPR0.001–0.0020.001–0.0020.002–0.0030.002–0.0040.003–0.0040.004–0.0050.004–0.0060.005–0.0060.006–0.0070.006–0.008
    2100130160IPR0.001–0.0020.001–0.0030.002–0.0030.002–0.0040.003–0.0050.004–0.0060.004–0.0060.005–0.0070.006–0.0080.006–0.009
    370100130IPR0.001–0.0020.001–0.0020.002–0.0030.002–0.0040.003–0.0040.004–0.0050.004–0.0060.005–0.0060.006–0.0070.006–0.008
    K1260390560IPR0.003–0.0060.004–0.0070.004–0.0090.005–0.0090.006–0.0120.008–0.0150.009–0.0170.010–0.0190.012–0.0240.015–0.029
    2260360460IPR0.004–0.0060.004–0.0060.005–0.0060.005–0.0080.006–0.0100.008–0.0120.009–0.0140.010–0.0160.012–0.0190.015–0.024
    3260330430IPR0.002–0.0050.003–0.0060.003–0.0070.004–0.0080.005–0.0100.006–0.0120.007–0.0140.008–0.0160.009–0.0190.012–0.024
    N13007501030IPR0.002–0.0050.002–0.0050.003–0.0060.004–0.0060.005–0.0080.006–0.0090.008–0.0110.009–0.0130.011–0.0160.013–0.019
    2300740890IPR0.002–0.0030.002–0.0050.003–0.0060.004–0.0080.005–0.0090.006–0.0110.008–0.0130.009–0.0140.011–0.0170.013–0.021
    3300590890IPR0.004–0.0050.004–0.0060.005–0.0060.005–0.0060.006–0.0080.006–0.0090.008–0.0110.009–0.0130.011–0.0160.013–0.017
    4300440590IPR0.002–0.0030.002–0.0050.003–0.0060.004–0.0080.005–0.0090.006–0.0110.008–0.0130.009–0.0140.011–0.0160.013–0.019
    S13080100IPR0.000–0.0020.001–0.0020.001–0.0020.002–0.0030.002–0.0040.003–0.0050.004–0.0050.004–0.0060.005–0.0060.006–0.007
    2307080IPR0.000–0.0010.001–0.0010.001–0.0020.001–0.0020.002–0.0030.003–0.0040.003–0.0040.004–0.0050.004–0.0060.004–0.006
    33080100IPR0.000–0.0010.001–0.0010.001–0.0020.001–0.0020.002–0.0030.002–0.0040.003–0.0040.003–0.0040.004–0.0050.004–0.006
    43080130IPR0.000–0.0010.001–0.0010.001–0.0020.001–0.0020.002–0.0030.003–0.0040.003–0.0040.004–0.0050.004–0.0060.004–0.006
    H13050100IPR0.000–0.0010.001–0.0010.001–0.0020.001–0.0020.002–0.0030.003–0.0040.003–0.0040.004–0.0050.004–0.0060.004–0.006
    23030100IPR0.000–0.0010.001–0.0010.001–0.0020.001–0.0020.002–0.0030.002–0.0040.003–0.0040.003–0.0040.004–0.0050.004–0.006
    product data image 37344product data image 100017651
    가공 속도 vcMetric
    범위 m/min직경별 권장 이송(f)
    소재 그룹최소초기값최대1,02,03,04,06,08,010,012,016,020,0
    P070100140mm/dev0,03 0,100,04 0,090,05 0,110,08 0,140,09 0,190,11 0,220,13 0,260,15 0,300,19 0,360,24 0,46
    170100140mm/dev0,04 0,090,05 0,120,07 0,140,08 0,160,11 0,220,13 0,260,15 0,310,18 0,350,22 0,420,28 0,54
    290120140mm/dev0,04 0,090,05 0,120,07 0,140,08 0,160,12 0,220,14 0,260,17 0,310,20 0,350,24 0,420,31 0,53
    36080100mm/dev0,05 0,100,06 0,130,08 0,150,09 0,170,13 0,230,15 0,280,19 0,330,22 0,380,26 0,470,34 0,59
    45080100mm/dev0,05 0,100,06 0,130,07 0,150,08 0,170,12 0,230,14 0,280,17 0,330,19 0,380,23 0,470,29 0,59
    5405070mm/dev0,03 0,100,04 0,060,05 0,070,06 0,100,08 0,140,10 0,180,12 0,220,14 0,240,18 0,320,23 0,41
    6405070mm/dev0,03 0,050,04 0,060,05 0,080,06 0,100,08 0,140,10 0,180,13 0,220,14 0,240,18 0,320,23 0,41
    M1203040mm/dev0,02 0,050,03 0,060,04 0,070,05 0,090,08 0,110,09 0,120,10 0,140,12 0,160,14 0,180,16 0,20
    2304050mm/dev0,02 0,060,03 0,070,04 0,080,06 0,100,08 0,120,09 0,140,10 0,160,12 0,180,14 0,200,16 0,22
    3203040mm/dev0,02 0,050,03 0,060,04 0,070,05 0,090,08 0,110,09 0,120,10 0,140,12 0,160,14 0,180,16 0,20
    K180120170mm/dev0,08 0,160,09 0,170,11 0,220,12 0,240,16 0,310,20 0,380,23 0,440,25 0,490,31 0,600,38 0,74
    280110140mm/dev0,10 0,140,11 0,150,12 0,160,13 0,190,16 0,250,20 0,310,23 0,360,25 0,400,31 0,480,38 0,60
    380100130mm/dev0,05 0,130,07 0,150,08 0,170,09 0,190,12 0,250,14 0,300,17 0,350,19 0,400,24 0,480,30 0,60
    N190230315mm/dev0,05 0,120,06 0,130,08 0,140,10 0,160,12 0,200,16 0,240,20 0,280,24 0,320,28 0,400,32 0,48
    290225270mm/dev0,04 0,080,06 0,120,08 0,160,10 0,200,12 0,240,16 0,280,20 0,320,24 0,360,28 0,440,32 0,52
    390180270mm/dev0,10 0,130,11 0,140,12 0,140,13 0,160,14 0,200,16 0,240,20 0,280,24 0,320,28 0,400,32 0,44
    490135180mm/dev0,04 0,080,06 0,120,08 0,160,10 0,200,12 0,240,16 0,280,20 0,320,24 0,360,28 0,400,32 0,48
    S1102530mm/dev0,01 0,040,02 0,050,03 0,060,04 0,080,06 0,100,08 0,120,09 0,130,10 0,140,12 0,160,14 0,18
    2102025mm/dev0,01 0,030,02 0,030,02 0,040,03 0,060,05 0,080,07 0,100,08 0,110,09 0,120,10 0,140,11 0,16
    3102530mm/dev0,01 0,030,02 0,030,02 0,040,02 0,050,04 0,070,06 0,090,07 0,100,08 0,110,09 0,130,10 0,15
    4102540mm/dev0,01 0,030,02 0,030,02 0,040,03 0,060,05 0,080,07 0,100,08 0,110,09 0,120,10 0,140,11 0,16
    H1101530mm/dev0,01 0,030,02 0,030,02 0,040,03 0,060,05 0,080,07 0,100,08 0,110,09 0,120,10 0,140,11 0,16
    2101030mm/dev0,01 0,030,02 0,030,02 0,040,02 0,050,04 0,070,06 0,090,07 0,100,08 0,110,09 0,130,10 0,15
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk