환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
Exit Search 솔루션으로 돌아가기

솔루션 수정

솔루션 추가

솔루션 이름:{{SolutionName}}

    유사한 제품:

    이전 | 유사하게 수정된

    파일럿 드릴 • B505Z • K10 • A 섕크 • 쿨런트 미사용 NC 스폿 드릴

    NC 스폿 드릴 • 쿨런트 미사용

    제품 번호100003652

    파일럿 드릴 • B505Z • K10 • A 섕크 • 쿨런트 미사용 NC 스폿 드릴
    파일럿 드릴 • B505Z • K10 • A 섕크 • 쿨런트 미사용 NC 스폿 드릴
    파일럿 드릴 • B505Z • K10 • A 섕크 • 쿨런트 미사용 NC 스폿 드릴
    Open expanded view
    파일럿 드릴 • B505Z • K10 • A 섕크 • 쿨런트 미사용 NC 스폿 드릴
    파일럿 드릴 • B505Z • K10 • A 섕크 • 쿨런트 미사용 NC 스폿 드릴
    일반적인 표현
    모든 가격 옵션을 알아보려면 당사 영업팀에 문의하세요.

    특징 및 장점

    • 내부 쿨런트가 없는 NC 스폿 드릴
    • 전체 드릴 사이클 전에 스폿 드릴링을 수행하여 향상된 홀 포지셔닝을 보장하는 애플리케이션 특정 SC 드릴
    • 랜드 또는 바디 릴리프가 없고 플루트 길이가 짧으며 스폿 작업 전용으로 설계
    • HSS 드릴의 스폿 작업을 위한 90° 지원
    • 드릴링: 볼록면드릴링: 볼록면
    공차 • Metric
    D1공차 h8 + / -공차 h6 +/-
    3–60,000/-0,0180,000/-0,008
    6–100,000/-0,0220,000/-0,009
    10–180,000/-0,0270,000/-0,011
    공차 • Inch
    D1공차 h8 + / -공차 h6 +/-
    .1181 .2362.0000/-.0007.0000/-.0003
    .2362 .3937.0000/-.0009.0000/-.0004
    .3937 .7087.0000/-.0011.0000/-.0004

    쿨런트 미사용 스폿 드릴 • B50_ 시리즈 • K10 재종 • 건식 및 외부 쿨런트 • 드릴 직경 3–20mm • Metric

    소재 그룹product data image 37346product data image 100085500
    가공 속도 vcMetric
    범위 m/min직경별 권장 이송(f)
    최소초기값최대3,04,06,08,010,012,016,020,0
    P05065100mm/r0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    1405580mm/r0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    2405580mm/r0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    3405580mm/r0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    4405580mm/r0,05–0,080,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,220,16–0,24
    5304060mm/r0,03–0,050,03–0,060,04–0,080,06–0,100,08–0,120,10–0,140,12–0,180,14–0,20
    6304060mm/r0,03–0,050,03–0,060,04–0,080,06–0,100,08–0,120,10–0,140,12–0,180,14–0,20
    M1303550mm/r0,04–0,070,05–0,090,06–0,110,80–0,130,09–0,150,10–0,170,11–0,200,12–0,23
    2304050mm/r0,03–0,050,04–0,080,05–0,090,06–0,100,07–0,120,08–0,140,09–0,170,10–0,20
    3253040mm/r0,03–0,050,04–0,080,05–0,090,06–0,100,07–0,120,08–0,140,09–0,170,10–0,20
    K16090120mm/r0,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,220,18–0,260,20–0,30
    26080100mm/r0,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,220,18–0,260,20–0,30
    36090120mm/r0,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,220,18–0,260,20–0,30
    N190230270mm/r0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    290220270mm/r0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    390180225mm/r0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    490130270mm/r0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    S1202530mm/r0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    2102030mm/r0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    3202540mm/r0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    4202550mm/r0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    소재 그룹product data image 37346product data image 100085500
    절삭속도 — vcInch
    소재 그룹가공 속도 vcInch
    범위 SFM직경별 권장 이송(f)
    최소초기값최대1/8 0.1253/16 0.1881/4 0.2505/16 0.3133/8 0.3751/2 0.5005/8 0.6253/4 0.750
    P0160210330IPR0.002–0.0040.002–0.0050.003–0.0060.004–0.0060.005–0.0070.006–0.0080.006–0.0090.007–0.011
    1130180260IPR0.002–0.0040.002–0.0050.003–0.0060.004–0.0060.005–0.0070.006–0.0080.006–0.0090.007–0.011
    2130180260IPR0.002–0.0040.002–0.0050.003–0.0060.004–0.0060.005–0.0070.006–0.0080.006–0.0090.007–0.011
    3130180260IPR0.002–0.0040.002–0.0050.003–0.0060.004–0.0060.005–0.0070.006–0.0080.006–0.0090.007–0.011
    4130180260IPR0.002–0.0030.002–0.0040.002–0.0050.003–0.0060.004–0.0060.005–0.0070.006–0.0090.006–0.009
    5100130200IPR0.001–0.0020.001–0.0020.002–0.0030.002–0.0040.003–0.0050.004–0.0060.005–0.0070.006–0.008
    6100130200IPR0.001–0.0020.001–0.0020.002–0.0030.002–0.0040.003–0.0050.004–0.0060.005–0.0070.006–0.008
    M1100110160IPR0.002–0.0030.002–0.0040.002–0.0040.032–0.0050.004–0.0060.004–0.0070.004–0.0080.005–0.009
    2100130160IPR0.001–0.0020.002–0.0030.002–0.0040.002–0.0040.003–0.0050.003–0.0060.004–0.0070.004–0.008
    380100130IPR0.001–0.0020.002–0.0030.002–0.0040.002–0.0040.003–0.0050.003–0.0060.004–0.0070.004–0.008
    K1200300390IPR0.002–0.0050.003–0.0060.004–0.0060.005–0.0070.006–0.0080.006–0.0090.007–0.0100.008–0.012
    2200260330IPR0.002–0.0050.003–0.0060.004–0.0060.005–0.0070.006–0.0080.006–0.0090.007–0.0100.008–0.012
    3200300390IPR0.002–0.0050.003–0.0060.004–0.0060.005–0.0070.006–0.0080.006–0.0090.007–0.0100.008–0.012
    N1300750890IPR0.002–0.0050.003–0.0060.004–0.0070.005–0.0100.006–0.0110.007–0.0130.008–0.0130.009–0.015
    2300720890IPR0.002–0.0050.003–0.0060.004–0.0070.005–0.0100.006–0.0110.007–0.0130.008–0.0130.009–0.015
    3300590740IPR0.002–0.0050.003–0.0060.004–0.0070.005–0.0100.006–0.0110.007–0.0130.008–0.0130.009–0.015
    4300430890IPR0.002–0.0050.003–0.0060.004–0.0070.005–0.0100.006–0.0110.007–0.0130.008–0.0130.009–0.015
    S17080100IPR0.001–0.0020.002–0.0030.002–0.0040.002–0.0040.003–0.0040.003–0.0050.004–0.0060.004–0.008
    23070100IPR0.001–0.0020.002–0.0030.002–0.0040.002–0.0040.003–0.0040.003–0.0050.004–0.0060.004–0.008
    37080130IPR0.001–0.0020.002–0.0030.002–0.0040.002–0.0040.003–0.0040.003–0.0050.004–0.0060.004–0.008
    47080160IPR0.001–0.0020.002–0.0030.002–0.0040.002–0.0040.003–0.0040.003–0.0050.004–0.0060.004–0.008
    product data image 37346product data image 100085500
    가공 속도 vcMetric
    범위 m/min직경별 권장 이송(f)
    소재 그룹최소초기값최대3,04,06,08,010,012,016,020,0
    P05065100mm/dev0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    1405580mm/dev0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    2405580mm/dev0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    3405580mm/dev0,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,240,18–0,28
    4405580mm/dev0,05–0,080,05–0,100,06–0,120,08–0,140,10–0,160,12–0,180,14–0,220,16–0,24
    5304060mm/dev0,03–0,050,03–0,060,04–0,080,06–0,100,08–0,120,10–0,140,12–0,180,14–0,20
    6304060mm/dev0,03–0,050,03–0,060,04–0,080,06–0,100,08–0,120,10–0,140,12–0,180,14–0,20
    M1303550mm/dev0,04–0,070,05–0,090,06–0,110,80–0,130,09–0,150,10–0,170,11–0,200,12–0,23
    2304050mm/dev0,03–0,050,04–0,080,05–0,090,06–0,100,07–0,120,08–0,140,09–0,170,10–0,20
    3253040mm/dev0,03–0,050,04–0,080,05–0,090,06–0,100,07–0,120,08–0,140,09–0,170,10–0,20
    K16090120mm/dev0,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,220,18–0,260,20–0,30
    26080100mm/dev0,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,220,18–0,260,20–0,30
    36090120mm/dev0,06–0,120,08–0,140,10–0,160,12–0,180,14–0,200,16–0,220,18–0,260,20–0,30
    N190230270mm/dev0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    290220270mm/dev0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    390180225mm/dev0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    490130270mm/dev0,06–0,130,08–0,150,10–0,180,12–0,250,15–0,280,18–0,320,20–0,340,22–0,38
    S1202530mm/dev0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    2102030mm/dev0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    3202540mm/dev0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    4202550mm/dev0,03–0,050,04–0,070,05–0,090,06–0,100,07–0,110,08–0,130,09–0,160,10–0,20
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk