Inserts for ModBORE
필터
필터
필터 보기 위치
MetricInch
Workpiece Material
Workpiece Material
- P Steel (189)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(189)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(189)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(189)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(189)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(189)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(189)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(189)
- M Stainless Steel (154)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(154)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(154)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(154)
- K Cast Iron (170)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(170)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(170)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(170)
- N Non-Ferrous Materials (138)
- N1Wrought Aluminum (138)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(136)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (138)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (136)
- N6Carbon, Graphite Composites, CFRP (122)
- N7MMC's (14)
- S High-Temp Alloys (143)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(143)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(143)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(143)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(143)
- H Hardened Materials (74)
- H1Hardened Materials 44-48 HRC(74)
- H2Hardened Materials 48-55 HRC(14)
- C CFRP Materials (28)
- C1CFRP, CFRP / CFRP (14)
- C2CFRP / Aluminium CFRP / Non-Ferrous (14)
1차 선택 선택
- BR (5)
- CN (39)
- DE (39)
- GB (33)
- IN (49)
- SG (28)
- US (39)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (49)
- Lightly Interrupted Cut (70)
- Smooth Cut (169)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (89)
- 4.0 (67)
- 8.0 (65)
받는 사람
Corner Radius
Corner Radius
- 0.002 in(2)
- 0.004 in(9)
- 0.008 in(38)
- 0.016 in(72)
- 0.031 in(68)
- 0.047 in(28)
- 0.063 in(4)
받는 사람
Corner Radius
Corner Radius
- 0.05 mm(2)
- 0.1 mm(9)
- 0.2 mm(38)
- 0.4 mm(72)
- 0.8 mm(68)
- 1.201 mm(28)
- 1.6 mm(4)
받는 사람
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (14)
- K68 (2)
- KC5010 (67)
- KC5025 (26)
- KC5410 (14)
- KC730 (12)
- KCK05 (3)
- KCK05B (1)
- KCK15B (4)
- KCP05 (4)
- KCP10 (6)
- KCP10B (6)
- KCP25 (6)
- KCP25B (5)
- KCU10 (14)
- KCU25 (8)
- KT315 (27)
- KT325 (2)
Wiper Insert
Wiper Insert
- N (187)
- Y (34)
insertGeometry
Insert IC Size
Insert IC Size
- 6.351 mm(43)
- 9.525 mm(58)
- 12.701 mm(112)
- 15.875 mm(4)
- 19.05 mm(4)
받는 사람
Insert IC Size
Insert IC Size
- 0.25 in(43)
- 0.375 in(58)
- 0.5 in(112)
- 0.625 in(4)
- 0.75 in(4)
받는 사람
Cutting Edge Length
Cutting Edge Length
- 6.45 mm(36)
- 6.476 mm(7)
- 9.675 mm(58)
- 12.9 mm(112)
- 16.125 mm(4)
- 19.35 mm(4)
받는 사람
Cutting Edge Length
Cutting Edge Length
- 0.254 in(36)
- 0.255 in(7)
- 0.381 in(58)
- 0.508 in(112)
- 0.635 in(4)
- 0.762 in(4)
받는 사람
Chip Breaker CBMD
Chip Breaker CBMD
- 11 (5)
- FF (3)
- FN (29)
- FP (4)
- FW (16)
- HP (50)
- LF (49)
- MP (7)
- MW (18)
- RP (9)
- UF (4)
Cutting Tool Material
Cutting Tool Material
- H T (28)
- H W (193)
Tolerance Class
Tolerance Class
- G (101)
- M (120)
No filters matching ""