5505VX Ball Nose End Mills • Stellram

필터 선택
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (44)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(44)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(44)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(44)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(44)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(44)
    • M Stainless Steel (44)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(44)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(44)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(44)
    • S High-Temp Alloys (44)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(44)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(44)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(44)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(44)
    Applications
    Applications
    • Face MillingFace Milling (36)
    • Profile MillingProfile Milling (36)
    • RampingRamping (36)
    • Shoulder Ball NoseShoulder Ball Nose (36)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (36)
    • Shoulder MillingShoulder Milling (36)
    • Shoulder RoughingShoulder Roughing (36)
    • Slot Ball NoseSlot Ball Nose (36)
    • Slot MillingSlot Milling (36)
    • Slot SideSlot Side (36)
    Cutting Diameter
    Cutting Diameter
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.748 in(1)
    • 0.75 in(3)
    • 0.787 in(3)
    • 0.984 in(5)
    • 1.0 in(3)
    • 1.25 in(4)
    • 1.26 in(4)
    • 1.5 in(2)
    • 1.575 in(2)
    • 1.969 in(2)
    • 2.0 in(2)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.0 mm(1)
    • 19.05 mm(3)
    • 20.0 mm(3)
    • 25.0 mm(5)
    • 25.401 mm(3)
    • 31.75 mm(4)
    • 32.0 mm(4)
    • 38.1 mm(2)
    • 40.0 mm(2)
    • 50.0 mm(2)
    • 50.801 mm(2)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 16.0 mm(5)
    • 16.6 mm(1)
    • 19.05 mm(3)
    • 20.0 mm(2)
    • 20.3 mm(1)
    • 25.0 mm(8)
    • 32.0 mm(8)
    • 38.1 mm(2)
    • 40.0 mm(2)
    • 50.801 mm(1)
    • 51.0 mm(3)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.63 in(5)
    • 0.654 in(1)
    • 0.75 in(3)
    • 0.787 in(2)
    • 0.799 in(1)
    • 0.984 in(8)
    • 1.26 in(8)
    • 1.5 in(2)
    • 1.575 in(2)
    • 2.0 in(1)
    • 2.008 in(3)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 0.984 in(1)
    • 1.0 in(1)
    • 1.181 in(2)
    • 1.282 in(1)
    • 1.379 in(3)
    • 1.575 in(5)
    • 1.969 in(2)
    • 2.0 in(1)
    • 2.165 in(1)
    • 2.346 in(1)
    • 2.369 in(1)
    • 2.559 in(4)
    • 2.717 in(1)
    • 2.961 in(1)
    • 3.0 in(1)
    • 3.938 in(3)
    • 3.996 in(1)
    • 4.0 in(2)
    • 5.906 in(2)
    • 5.996 in(1)
    • 6.08 in(1)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 25.0 mm(1)
    • 25.401 mm(1)
    • 30.0 mm(2)
    • 32.575 mm(1)
    • 35.0 mm(3)
    • 40.0 mm(5)
    • 50.0 mm(2)
    • 50.801 mm(1)
    • 55.0 mm(1)
    • 59.6 mm(1)
    • 60.176 mm(1)
    • 65.0 mm(4)
    • 69.0 mm(1)
    • 75.2 mm(1)
    • 76.2 mm(1)
    • 100.0 mm(3)
    • 101.5 mm(1)
    • 101.601 mm(2)
    • 150.0 mm(2)
    • 152.3 mm(1)
    • 154.425 mm(1)
    Reach Min받는 사람Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (36)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Screw-On Connection (8)
    • Straight-Cylindrical (11)
    • Weldon (17)
    Number of Flutes
    Number of Flutes
    • 2 (36)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.693 in(1)
    • 1.709 in(1)
    • 2.126 in(2)
    • 2.441 in(2)
    • 2.874 in(2)
    • 4.173 in(1)
    • 4.279 in(1)
    • 4.567 in(1)
    • 4.65 in(1)
    • 5.0 in(1)
    • 5.281 in(1)
    • 5.323 in(1)
    • 5.5 in(1)
    • 5.906 in(1)
    • 6.281 in(1)
    • 6.299 in(1)
    • 6.686 in(1)
    • 6.687 in(1)
    • 6.694 in(2)
    • 7.0 in(1)
    • 7.087 in(1)
    • 7.875 in(1)
    • 8.0 in(1)
    • 8.661 in(1)
    • 8.685 in(1)
    • 9.055 in(1)
    • 9.329 in(1)
    • 9.843 in(3)
    • 10.0 in(1)
    • 10.079 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 43.0 mm(1)
    • 43.401 mm(1)
    • 54.0 mm(2)
    • 62.0 mm(2)
    • 73.0 mm(2)
    • 106.0 mm(1)
    • 108.65 mm(1)
    • 116.0 mm(1)
    • 118.101 mm(1)
    • 127.0 mm(1)
    • 134.125 mm(1)
    • 135.201 mm(1)
    • 139.701 mm(1)
    • 150.0 mm(1)
    • 159.525 mm(1)
    • 160.0 mm(1)
    • 169.8 mm(1)
    • 169.851 mm(1)
    • 170.0 mm(2)
    • 177.8 mm(1)
    • 180.0 mm(1)
    • 200.0 mm(1)
    • 203.201 mm(1)
    • 220.0 mm(1)
    • 220.576 mm(1)
    • 230.0 mm(1)
    • 236.951 mm(1)
    • 250.0 mm(3)
    • 254.0 mm(1)
    • 256.0 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.312 in(6)
    • 0.375 in(5)
    • 0.392 in(4)
    • 0.492 in(9)
    • 0.625 in(9)
    • 0.768 in(3)
    • 0.787 in(3)
    • 1.0 in(5)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 7.926 mm(6)
    • 9.525 mm(5)
    • 9.951 mm(4)
    • 12.5 mm(9)
    • 15.875 mm(9)
    • 19.5 mm(3)
    • 20.0 mm(3)
    • 25.401 mm(5)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Hand Of Tool
    Hand Of Tool
    • R (36)
    Wiper Insert
    Wiper Insert
    • N (8)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 85.0 (36)
    Maximum Ramp Angle Min받는 사람Maximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.551 in(1)
    • 0.568 in(2)
    • 0.69 in(1)
    • 0.709 in(1)
    • 0.719 in(1)
    • 0.728 in(1)
    • 0.732 in(1)
    • 0.88 in(4)
    • 0.897 in(1)
    • 0.929 in(1)
    • 1.114 in(6)
    • 1.407 in(2)
    • 1.449 in(2)
    • 1.504 in(1)
    • 1.874 in(3)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 14.0 mm(1)
    • 14.4 mm(2)
    • 17.5 mm(1)
    • 18.0 mm(1)
    • 18.25 mm(1)
    • 18.5 mm(1)
    • 18.6 mm(1)
    • 22.35 mm(4)
    • 22.776 mm(1)
    • 23.6 mm(1)
    • 28.3 mm(6)
    • 35.7 mm(2)
    • 36.801 mm(2)
    • 38.176 mm(1)
    • 47.6 mm(3)
    Neck Diameter Min받는 사람Neck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Insert IC Size
    Insert IC Size
    • 7.4 mm(1)
    • 8.525 mm(1)
    • 9.0 mm(1)
    • 11.0 mm(1)
    • 14.101 mm(1)
    • 17.0 mm(1)
    • 18.0 mm(1)
    • 22.25 mm(1)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.291 in(1)
    • 0.336 in(1)
    • 0.354 in(1)
    • 0.433 in(1)
    • 0.555 in(1)
    • 0.669 in(1)
    • 0.709 in(1)
    • 0.876 in(1)
    Insert IC Size Min받는 사람Insert IC Size Max
    Cutting Tool Material
    Cutting Tool Material
    • H W (8)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (28)
    • SCREW-ON (8)
    Back-End Diameter
    Back-End Diameter
    • 13.0 mm(2)
    • 15.875 mm(1)
    • 18.0 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(1)
    • 21.0 mm(2)
    • 25.0 mm(4)
    • 25.401 mm(4)
    • 29.0 mm(2)
    • 31.75 mm(3)
    • 32.0 mm(5)
    • 38.1 mm(3)
    • 40.0 mm(3)
    • 50.0 mm(1)
    • 50.801 mm(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.512 in(2)
    • 0.625 in(1)
    • 0.709 in(2)
    • 0.75 in(2)
    • 0.787 in(1)
    • 0.828 in(2)
    • 0.984 in(4)
    • 1.0 in(4)
    • 1.143 in(2)
    • 1.25 in(3)
    • 1.26 in(5)
    • 1.5 in(3)
    • 1.575 in(3)
    • 1.969 in(1)
    • 2.0 in(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)