환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

Rodeka™ IC 12

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (43)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(42)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(42)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(42)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(42)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(42)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(43)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(43)
    • M Stainless Steel (43)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(43)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(43)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(43)
    • K Cast Iron (33)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(33)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(33)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(33)
    • N Non-Ferrous Materials (26)
      • N1
        Wrought Aluminum (26)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(26)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(26)
    • S High-Temp Alloys (41)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(36)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(36)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(36)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(41)
    • H Hardened Materials (28)
      • H1
        Hardened Materials 44-48 HRC(28)
    Applications
    Applications
    • Face MillingFace Milling (25)
    • PocketPocket (25)
    • Pocket MillingPocket Milling (25)
    • Profile MillingProfile Milling (25)
    • Shoulder Ball NoseShoulder Ball Nose (25)
    • Shoulder MillingShoulder Milling (25)
    • Shoulder RoughingShoulder Roughing (25)
    • Slot MillingSlot Milling (25)
    Cutting Diameter
    Cutting Diameter
    • 0.778 in(2)
    • 0.787 in(4)
    • 0.906 in(1)
    • 1.028 in(2)
    • 1.102 in(1)
    • 1.181 in(1)
    • 1.496 in(2)
    • 1.528 in(2)
    • 1.575 in(1)
    • 2.008 in(2)
    • 2.028 in(1)
    • 2.126 in(1)
    • 2.528 in(1)
    • 2.677 in(2)
    • 3.465 in(2)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 19.75 mm(2)
    • 20.0 mm(4)
    • 23.0 mm(1)
    • 26.1 mm(2)
    • 28.0 mm(1)
    • 30.0 mm(1)
    • 38.0 mm(2)
    • 38.801 mm(2)
    • 40.0 mm(1)
    • 51.0 mm(2)
    • 51.5 mm(1)
    • 54.0 mm(1)
    • 64.2 mm(1)
    • 68.0 mm(2)
    • 88.0 mm(2)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 31.75 mm(2)
    • 32.0 mm(4)
    • 35.0 mm(1)
    • 38.1 mm(2)
    • 40.0 mm(1)
    • 42.0 mm(1)
    • 50.0 mm(2)
    • 50.801 mm(2)
    • 52.0 mm(1)
    • 63.0 mm(2)
    • 63.5 mm(1)
    • 66.0 mm(1)
    • 76.2 mm(1)
    • 80.0 mm(2)
    • 100.0 mm(2)
    Maximum Cutting Diameter Min받는 사람Maximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.25 in(2)
    • 1.26 in(4)
    • 1.379 in(1)
    • 1.5 in(2)
    • 1.575 in(1)
    • 1.655 in(1)
    • 1.969 in(2)
    • 2.0 in(2)
    • 2.047 in(1)
    • 2.48 in(2)
    • 2.5 in(1)
    • 2.598 in(1)
    • 3.0 in(1)
    • 3.15 in(2)
    • 3.938 in(2)
    Maximum Cutting Diameter Min받는 사람Maximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 2.975 mm(1)
    • 3.0 mm(24)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.117 in(1)
    • 0.119 in(24)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 1.5 in(2)
    • 1.57 in(1)
    • 1.575 in(9)
    • 1.969 in(8)
    • 2.0 in(5)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 38.1 mm(2)
    • 39.875 mm(1)
    • 40.0 mm(9)
    • 50.0 mm(8)
    • 50.801 mm(5)
    Reach Min받는 사람Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (25)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (16)
    • Screw-On Connection (4)
    • Straight-Cylindrical (3)
    • Weldon (2)
    Number of Flutes
    Number of Flutes
    • 2 (3)
    • 3 (4)
    • 4 (6)
    • 5 (4)
    • 6 (1)
    • 7 (4)
    • 8 (2)
    • 9 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.57 in(1)
    • 1.575 in(3)
    • 1.969 in(8)
    • 2.0 in(4)
    • 2.465 in(1)
    • 2.539 in(3)
    • 4.28 in(1)
    • 4.921 in(1)
    • 7.875 in(1)
    • 9.0 in(1)
    • 9.843 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 39.875 mm(1)
    • 40.0 mm(3)
    • 50.0 mm(8)
    • 50.801 mm(4)
    • 62.6 mm(1)
    • 64.5 mm(3)
    • 108.7 mm(1)
    • 125.0 mm(1)
    • 200.0 mm(1)
    • 228.601 mm(1)
    • 250.0 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC422M (26)
    • KC510M (25)
    • KC520M (25)
    • KC522M (28)
    • KC725M (30)
    • KCK15 (25)
    • KCMP30 (25)
    • KCPK30 (30)
    • KCPM20 (27)
    • KCPM40 (27)
    • KCSM30 (25)
    • KCSM40 (26)
    Hand Of Tool
    Hand Of Tool
    • R (25)
    Wiper Insert
    Wiper Insert
    • N (19)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.24 (1)
    • 0.29 (3)
    • 0.3 (1)
    • 0.38 (2)
    • 0.4 (1)
    • 0.42 (3)
    • 0.44 (1)
    • 0.47 (2)
    • 0.48 (1)
    • 0.49 (1)
    • 0.5 (2)
    • 0.52 (1)
    • 0.54 (2)
    • 0.7 (1)
    • 0.74 (1)
    • 0.88 (2)
    Maximum Ramp Angle Min받는 사람Maximum Ramp Angle Max
    frontEnd
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • R-ROUND (19)
    Insert IC Size
    Insert IC Size
    • 12.0 mm(19)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.473 in(19)
    Insert IC Size Min받는 사람Insert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (8)
    • HD (7)
    • LD (4)
    Cutting Tool Material
    Cutting Tool Material
    • H W (19)
    Tolerance Class
    Tolerance Class
    • G (11)
    • P (8)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (5)
    • SCREW-ON (4)
    • SHELL MILL (16)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(1)
    • 16.0 mm(1)
    • 19.05 mm(3)
    • 22.0 mm(5)
    • 25.401 mm(2)
    • 27.0 mm(3)
    • 29.0 mm(4)
    • 31.75 mm(1)
    • 32.0 mm(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.63 in(1)
    • 0.75 in(3)
    • 0.866 in(5)
    • 1.0 in(2)
    • 1.063 in(3)
    • 1.143 in(4)
    • 1.25 in(1)
    • 1.26 in(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    Rodeka™ 12 • KDR RNGJ12... • 엔드밀 • 웰던 • Metric
    (1)

    Rodeka™ 12 • KDR RNGJ12... • 엔드밀 • 웰던 • Metric

    Rodeka™ 12 • KDR RNGJ12... • 쉘밀 • Metric
    (11)

    Rodeka™ 12 • KDR RNGJ12... • 쉘밀 • Metric

    Rodeka™ IC 12 • KDR RNGJ12... • Shell Mills • Inch
    (5)

    Rodeka™ IC 12 • KDR RNGJ12... • Shell Mills • Inch

    KDR용 인서트 • Rodeka™ IC 12 • RNPJ12-HD
    (4)

    KDR용 인서트 • Rodeka™ IC 12 • RNPJ12-HD

    KDR용 인서트 • Rodeka™ IC 12 • RNGJ12..LD/-GD
    (4)

    KDR용 인서트 • Rodeka™ IC 12 • RNGJ12..LD/-GD

    Rodeka™ IC 12 • KDR RNGJ12... • Screw-On End Mills • Inch
    (1)

    Rodeka™ IC 12 • KDR RNGJ12... • Screw-On End Mills • Inch

    Rodeka™ 12 • KDR RNGJ12... • 스크류 온 엔드밀 • Metric
    (3)

    Rodeka™ 12 • KDR RNGJ12... • 스크류 온 엔드밀 • Metric

    KDR용 인서트 • Rodeka™ IC 12 • RNPJ-GD
    (4)

    KDR용 인서트 • Rodeka™ IC 12 • RNPJ-GD

    Rodeka™ IC 12용 인서트 • RNGJ12..-GD
    (4)

    Rodeka™ IC 12용 인서트 • RNGJ12..-GD

    Rodeka™ IC 12용 인서트 • RNGJ12-HD
    (3)

    Rodeka™ IC 12용 인서트 • RNGJ12-HD

    Rodeka™ 12 • KDR RNGJ12... • 엔드밀 • 원통형 • Metric
    (2)

    Rodeka™ 12 • KDR RNGJ12... • 엔드밀 • 원통형 • Metric

    Rodeka™ IC 12 • KDR RNGJ12... • End Mills • Cylindrical • Inch
    (1)

    Rodeka™ IC 12 • KDR RNGJ12... • End Mills • Cylindrical • Inch

    Rodeka™ IC 12 • KDR RNGJ12... • End Mills • Weldon • Inch
    (1)

    Rodeka™ IC 12 • KDR RNGJ12... • End Mills • Weldon • Inch

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk