환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
Read More

최대 생산성

특허 받은 엔드 페이스 디자인 — 코너 안정성을 증가시키는 나선형 절삭 인선으로 최고 램핑각에서도 부드러운 절삭 동작 지원

특허 받은 코어 디자인 — 공구 안정성 향상

혁신적인 엔드 페이스 디자인 — 비대칭 분할 플루트와 가변 헬릭스로 진동 댐핑 및 탁월한 이송 지원

특허 받은 릴리프 — AVF 기술 사용. 면으로 이루어진 정밀 편심 릴리프로 진동 및 마찰 감소. 여러 소재에서 탁월한 절삭 조건 지원

특허 받은 플루트 디자인 — 혁신적인 플루트 내 칩 배출홈으로 절삭력을 낮춰 효율적인 칩 배출 지원

  

최대 혜택

HARVI™ I TE — 특허 받은 혁신적인 디자인으로 생산성 극대화

뛰어난 범용성. 강철, 스테인리스강, 주철, 내열합금을 탁월한 이송 속도와 압도적인 소재 제거율로 가공합니다.

다이내믹 밀링 및 극한의 램핑 작업을 포함한 다양한 가공에 적합

하나의 공구로 고성능 황삭 및 정삭이 가능한 4-플루트 엔드 밀

HARVI™ I TE — 최고의 소재 제거율, 최대 생산성, 최대 혜택 제공

   

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (692)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(692)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(692)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(692)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(692)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(692)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(692)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(692)
    • M Stainless Steel (692)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(692)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(692)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(692)
    • K Cast Iron (692)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(692)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(692)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(692)
    • S High-Temp Alloys (692)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(692)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(692)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(692)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(692)
    • H Hardened Materials (692)
      • H1
        Hardened Materials 44-48 HRC(692)
      • H2
        Hardened Materials 48-55 HRC(692)
    1차 선택 선택
    • CN (216)
    • DE (166)
    • GB (38)
    • SG (49)
    • US (361)
    Applications
    Applications
    • DrillingDrilling (220)
    • Face MillingFace Milling (377)
    • PocketPocket (652)
    • Pocket HelicalPocket Helical (652)
    • Pocket MillingPocket Milling (645)
    • Pocket Plunge MillingPocket Plunge Milling (652)
    • Profile MillingProfile Milling (50)
    • RampingRamping (652)
    • Shoulder Ball NoseShoulder Ball Nose (50)
    • Shoulder MillingShoulder Milling (695)
    • Shoulder RoughingShoulder Roughing (652)
    • Shoulder Square EndShoulder Square End (652)
    • Slot Ball NoseSlot Ball Nose (50)
    • Slot MillingSlot Milling (695)
    • Slot Square EndSlot Square End (652)
    • Trochoidal MillingTrochoidal Milling (702)
    Cutting Diameter
    Cutting Diameter
    • 0.063 in(2)
    • 0.078 in(1)
    • 0.079 in(12)
    • 0.094 in(2)
    • 0.098 in(10)
    • 0.109 in(1)
    • 0.119 in(12)
    • 0.125 in(10)
    • 0.138 in(10)
    • 0.156 in(3)
    • 0.157 in(20)
    • 0.188 in(10)
    • 0.197 in(12)
    • 0.219 in(3)
    • 0.237 in(20)
    • 0.25 in(22)
    • 0.281 in(3)
    • 0.313 in(12)
    • 0.315 in(20)
    • 0.375 in(44)
    • 0.394 in(34)
    • 0.438 in(10)
    • 0.473 in(40)
    • 0.5 in(66)
    • 0.551 in(10)
    • 0.625 in(48)
    • 0.63 in(45)
    • 0.709 in(8)
    • 0.75 in(58)
    • 0.787 in(45)
    • 0.984 in(43)
    • 1.0 in(56)
    • 1.25 in(10)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 1.6 mm(2)
    • 1.975 mm(1)
    • 2.0 mm(12)
    • 2.375 mm(2)
    • 2.5 mm(10)
    • 2.776 mm(1)
    • 3.0 mm(12)
    • 3.176 mm(10)
    • 3.5 mm(10)
    • 3.975 mm(3)
    • 4.0 mm(20)
    • 4.775 mm(10)
    • 5.0 mm(12)
    • 5.551 mm(3)
    • 6.0 mm(20)
    • 6.351 mm(22)
    • 7.15 mm(3)
    • 7.95 mm(12)
    • 8.0 mm(20)
    • 9.525 mm(44)
    • 10.0 mm(34)
    • 11.125 mm(10)
    • 12.0 mm(40)
    • 12.701 mm(66)
    • 14.0 mm(10)
    • 15.875 mm(48)
    • 16.0 mm(45)
    • 18.0 mm(8)
    • 19.05 mm(58)
    • 20.0 mm(45)
    • 25.0 mm(43)
    • 25.401 mm(56)
    • 31.75 mm(10)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 7.95 mm(1)
    Maximum Cutting Diameter Min받는 사람Maximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.313 in(1)
    Maximum Cutting Diameter Min받는 사람Maximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 2.0 mm(1)
    • 3.0 mm(1)
    • 3.176 mm(2)
    • 3.975 mm(1)
    • 4.0 mm(5)
    • 4.775 mm(2)
    • 5.0 mm(8)
    • 6.0 mm(19)
    • 6.351 mm(6)
    • 7.0 mm(6)
    • 7.95 mm(2)
    • 8.0 mm(12)
    • 9.0 mm(8)
    • 9.525 mm(11)
    • 10.0 mm(10)
    • 11.0 mm(8)
    • 11.125 mm(6)
    • 12.0 mm(11)
    • 12.701 mm(27)
    • 13.0 mm(17)
    • 14.0 mm(4)
    • 15.0 mm(11)
    • 15.875 mm(27)
    • 16.0 mm(11)
    • 18.0 mm(14)
    • 19.0 mm(4)
    • 19.05 mm(29)
    • 20.0 mm(2)
    • 20.625 mm(3)
    • 22.0 mm(22)
    • 22.225 mm(22)
    • 24.0 mm(16)
    • 25.0 mm(1)
    • 25.401 mm(52)
    • 26.0 mm(34)
    • 28.576 mm(8)
    • 30.0 mm(17)
    • 31.75 mm(32)
    • 32.0 mm(29)
    • 35.0 mm(2)
    • 37.5 mm(12)
    • 38.0 mm(27)
    • 38.1 mm(49)
    • 40.0 mm(1)
    • 44.45 mm(2)
    • 45.0 mm(27)
    • 50.0 mm(1)
    • 50.801 mm(6)
    • 57.151 mm(40)
    • 66.675 mm(2)
    • 76.2 mm(22)
    • 82.551 mm(2)
    • 101.601 mm(8)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.079 in(1)
    • 0.119 in(1)
    • 0.125 in(2)
    • 0.156 in(1)
    • 0.157 in(5)
    • 0.188 in(2)
    • 0.197 in(8)
    • 0.237 in(19)
    • 0.25 in(6)
    • 0.276 in(6)
    • 0.313 in(2)
    • 0.315 in(12)
    • 0.354 in(8)
    • 0.375 in(11)
    • 0.394 in(10)
    • 0.433 in(8)
    • 0.438 in(6)
    • 0.473 in(11)
    • 0.5 in(27)
    • 0.512 in(17)
    • 0.551 in(4)
    • 0.591 in(11)
    • 0.625 in(27)
    • 0.63 in(11)
    • 0.709 in(14)
    • 0.748 in(4)
    • 0.75 in(29)
    • 0.787 in(2)
    • 0.812 in(3)
    • 0.866 in(22)
    • 0.875 in(22)
    • 0.946 in(16)
    • 0.984 in(1)
    • 1.0 in(52)
    • 1.024 in(34)
    • 1.125 in(8)
    • 1.181 in(17)
    • 1.25 in(32)
    • 1.26 in(29)
    • 1.379 in(2)
    • 1.476 in(12)
    • 1.496 in(27)
    • 1.5 in(49)
    • 1.575 in(1)
    • 1.75 in(2)
    • 1.772 in(27)
    • 1.969 in(1)
    • 2.0 in(6)
    • 2.25 in(40)
    • 2.625 in(2)
    • 3.0 in(22)
    • 3.25 in(2)
    • 4.0 in(8)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 0.184 in(2)
    • 0.228 in(1)
    • 0.237 in(1)
    • 0.25 in(1)
    • 0.267 in(2)
    • 0.275 in(1)
    • 0.31 in(1)
    • 0.313 in(2)
    • 0.315 in(1)
    • 0.352 in(4)
    • 0.375 in(5)
    • 0.394 in(1)
    • 0.438 in(3)
    • 0.44 in(1)
    • 0.473 in(7)
    • 0.5 in(13)
    • 0.512 in(4)
    • 0.564 in(1)
    • 0.591 in(4)
    • 0.605 in(3)
    • 0.625 in(16)
    • 0.63 in(12)
    • 0.65 in(3)
    • 0.704 in(1)
    • 0.709 in(10)
    • 0.716 in(2)
    • 0.75 in(14)
    • 0.774 in(1)
    • 0.787 in(1)
    • 0.812 in(1)
    • 0.814 in(1)
    • 0.845 in(1)
    • 0.866 in(3)
    • 0.875 in(9)
    • 0.946 in(6)
    • 0.956 in(3)
    • 0.988 in(3)
    • 1.0 in(10)
    • 1.024 in(4)
    • 1.051 in(2)
    • 1.063 in(7)
    • 1.115 in(12)
    • 1.158 in(1)
    • 1.181 in(9)
    • 1.193 in(5)
    • 1.25 in(14)
    • 1.26 in(9)
    • 1.283 in(4)
    • 1.328 in(15)
    • 1.407 in(5)
    • 1.417 in(10)
    • 1.431 in(5)
    • 1.496 in(3)
    • 1.5 in(30)
    • 1.575 in(5)
    • 1.578 in(4)
    • 1.655 in(4)
    • 1.665 in(15)
    • 1.772 in(2)
    • 1.891 in(6)
    • 1.909 in(10)
    • 2.0 in(14)
    • 2.012 in(15)
    • 2.087 in(18)
    • 2.126 in(2)
    • 2.25 in(56)
    • 2.277 in(1)
    • 2.283 in(12)
    • 2.362 in(6)
    • 2.386 in(10)
    • 2.441 in(1)
    • 2.874 in(42)
    • 2.924 in(5)
    • 2.934 in(5)
    • 2.953 in(37)
    • 3.0 in(22)
    • 3.25 in(16)
    • 3.938 in(1)
    • 4.0 in(8)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 4.675 mm(2)
    • 5.801 mm(1)
    • 6.0 mm(1)
    • 6.351 mm(1)
    • 6.775 mm(2)
    • 6.976 mm(1)
    • 7.875 mm(1)
    • 7.95 mm(2)
    • 8.0 mm(1)
    • 8.925 mm(4)
    • 9.525 mm(5)
    • 10.0 mm(1)
    • 11.125 mm(3)
    • 11.175 mm(1)
    • 12.0 mm(7)
    • 12.701 mm(13)
    • 13.0 mm(4)
    • 14.3 mm(1)
    • 15.0 mm(4)
    • 15.375 mm(3)
    • 15.875 mm(16)
    • 16.0 mm(12)
    • 16.5 mm(3)
    • 17.875 mm(1)
    • 18.0 mm(10)
    • 18.175 mm(2)
    • 19.05 mm(14)
    • 19.651 mm(1)
    • 20.0 mm(1)
    • 20.625 mm(1)
    • 20.651 mm(1)
    • 21.475 mm(1)
    • 22.0 mm(3)
    • 22.225 mm(9)
    • 24.0 mm(6)
    • 24.25 mm(3)
    • 25.1 mm(3)
    • 25.401 mm(10)
    • 26.0 mm(4)
    • 26.701 mm(2)
    • 27.0 mm(7)
    • 28.326 mm(12)
    • 29.425 mm(1)
    • 30.0 mm(9)
    • 30.3 mm(5)
    • 31.75 mm(14)
    • 32.0 mm(9)
    • 32.6 mm(4)
    • 33.725 mm(15)
    • 35.7 mm(5)
    • 36.0 mm(10)
    • 36.35 mm(5)
    • 38.0 mm(3)
    • 38.1 mm(30)
    • 40.0 mm(5)
    • 40.075 mm(4)
    • 42.0 mm(4)
    • 42.276 mm(15)
    • 45.0 mm(2)
    • 48.0 mm(6)
    • 48.475 mm(10)
    • 50.801 mm(14)
    • 51.1 mm(15)
    • 53.0 mm(18)
    • 54.0 mm(2)
    • 57.151 mm(56)
    • 57.801 mm(1)
    • 58.0 mm(12)
    • 60.0 mm(6)
    • 60.6 mm(10)
    • 62.0 mm(1)
    • 73.0 mm(42)
    • 74.275 mm(5)
    • 74.5 mm(5)
    • 75.0 mm(37)
    • 76.2 mm(22)
    • 82.551 mm(16)
    • 100.0 mm(1)
    • 101.601 mm(8)
    Reach Min받는 사람Reach Max
    Connection Style
    Connection Style
    • SAFE-LOCK (27)
    • Straight-Cylindrical (384)
    • Weldon (291)
    Over All Length [L]
    Over All Length [L]
    • 1.5 in(15)
    • 1.969 in(10)
    • 2.0 in(24)
    • 2.126 in(32)
    • 2.165 in(4)
    • 2.244 in(40)
    • 2.25 in(5)
    • 2.283 in(4)
    • 2.48 in(12)
    • 2.5 in(46)
    • 2.598 in(4)
    • 2.677 in(4)
    • 2.75 in(8)
    • 2.757 in(4)
    • 2.835 in(6)
    • 2.874 in(4)
    • 2.953 in(4)
    • 2.992 in(16)
    • 3.0 in(38)
    • 3.228 in(4)
    • 3.25 in(14)
    • 3.269 in(23)
    • 3.5 in(24)
    • 3.622 in(18)
    • 3.938 in(43)
    • 4.0 in(73)
    • 4.094 in(6)
    • 4.331 in(1)
    • 4.5 in(24)
    • 4.529 in(12)
    • 4.764 in(11)
    • 4.921 in(43)
    • 5.0 in(40)
    • 5.315 in(33)
    • 5.5 in(16)
    • 5.906 in(2)
    • 6.0 in(16)
    • 6.535 in(1)
    • 7.0 in(18)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.1 mm(15)
    • 50.0 mm(10)
    • 50.801 mm(24)
    • 54.0 mm(32)
    • 55.0 mm(4)
    • 57.0 mm(40)
    • 57.151 mm(5)
    • 58.0 mm(4)
    • 63.0 mm(12)
    • 63.5 mm(46)
    • 66.0 mm(4)
    • 68.0 mm(4)
    • 69.851 mm(8)
    • 70.0 mm(4)
    • 72.0 mm(6)
    • 73.0 mm(4)
    • 75.0 mm(4)
    • 76.0 mm(16)
    • 76.2 mm(38)
    • 82.0 mm(4)
    • 82.551 mm(14)
    • 83.0 mm(23)
    • 88.9 mm(24)
    • 92.0 mm(18)
    • 100.0 mm(43)
    • 101.601 mm(73)
    • 104.0 mm(6)
    • 110.0 mm(1)
    • 114.301 mm(24)
    • 115.0 mm(12)
    • 121.0 mm(11)
    • 125.0 mm(43)
    • 127.0 mm(40)
    • 135.0 mm(33)
    • 139.701 mm(16)
    • 150.0 mm(2)
    • 152.4 mm(16)
    • 166.0 mm(1)
    • 177.8 mm(18)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (50)
    • CHAMFER (137)
    • RADIUS (394)
    • SQUARE END (121)
    Corner Radius
    Corner Radius
    • 0.0 in(258)
    • 0.01 in(11)
    • 0.015 in(32)
    • 0.02 in(36)
    • 0.03 in(60)
    • 0.031 in(1)
    • 0.039 in(34)
    • 0.047 in(1)
    • 0.06 in(57)
    • 0.063 in(2)
    • 0.079 in(26)
    • 0.09 in(33)
    • 0.094 in(2)
    • 0.098 in(16)
    • 0.119 in(26)
    • 0.12 in(28)
    • 0.125 in(2)
    • 0.156 in(2)
    • 0.157 in(26)
    • 0.188 in(2)
    • 0.197 in(2)
    • 0.219 in(2)
    • 0.237 in(17)
    • 0.25 in(10)
    • 0.313 in(4)
    • 0.315 in(2)
    • 0.375 in(4)
    • 0.394 in(2)
    • 0.5 in(4)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(258)
    • 0.25 mm(11)
    • 0.375 mm(32)
    • 0.5 mm(36)
    • 0.75 mm(60)
    • 0.8 mm(1)
    • 1.0 mm(34)
    • 1.201 mm(1)
    • 1.5 mm(2)
    • 1.526 mm(55)
    • 1.6 mm(2)
    • 2.0 mm(26)
    • 2.275 mm(33)
    • 2.375 mm(2)
    • 2.5 mm(16)
    • 3.0 mm(26)
    • 3.051 mm(28)
    • 3.176 mm(2)
    • 3.975 mm(2)
    • 4.0 mm(26)
    • 4.775 mm(2)
    • 5.0 mm(2)
    • 5.551 mm(2)
    • 6.0 mm(17)
    • 6.351 mm(10)
    • 7.95 mm(4)
    • 8.0 mm(2)
    • 9.525 mm(4)
    • 10.0 mm(2)
    • 12.701 mm(4)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(565)
    • 0.1 mm(16)
    • 0.151 mm(12)
    • 0.2 mm(12)
    • 0.25 mm(8)
    • 0.301 mm(4)
    • 0.351 mm(14)
    • 0.375 mm(11)
    • 0.4 mm(8)
    • 0.5 mm(52)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(565)
    • 0.004 in(16)
    • 0.006 in(12)
    • 0.008 in(12)
    • 0.01 in(8)
    • 0.012 in(4)
    • 0.014 in(14)
    • 0.015 in(11)
    • 0.016 in(8)
    • 0.02 in(52)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KCPM15 (308)
    • KCSM15 (394)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 10.0 (228)
    • 45.0 (318)
    Maximum Ramp Angle Min받는 사람Maximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.111 in(5)
    • 0.13 in(4)
    • 0.148 in(13)
    • 0.185 in(5)
    • 0.222 in(13)
    • 0.236 in(4)
    • 0.296 in(13)
    • 0.352 in(8)
    • 0.37 in(27)
    • 0.444 in(33)
    • 0.472 in(10)
    • 0.518 in(4)
    • 0.588 in(10)
    • 0.593 in(38)
    • 0.666 in(2)
    • 0.705 in(16)
    • 0.74 in(38)
    • 0.941 in(8)
    • 0.946 in(37)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 2.825 mm(5)
    • 3.301 mm(4)
    • 3.75 mm(13)
    • 4.7 mm(5)
    • 5.65 mm(13)
    • 5.976 mm(4)
    • 7.525 mm(13)
    • 8.951 mm(8)
    • 9.4 mm(27)
    • 11.275 mm(33)
    • 11.951 mm(10)
    • 13.15 mm(4)
    • 14.925 mm(10)
    • 15.05 mm(38)
    • 16.925 mm(2)
    • 17.901 mm(16)
    • 18.8 mm(38)
    • 23.875 mm(8)
    • 24.0 mm(37)
    Neck Diameter Min받는 사람Neck Diameter Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 3.176 mm(16)
    • 4.0 mm(6)
    • 4.775 mm(13)
    • 6.0 mm(90)
    • 6.351 mm(25)
    • 7.95 mm(15)
    • 8.0 mm(20)
    • 9.525 mm(44)
    • 10.0 mm(34)
    • 11.125 mm(10)
    • 12.0 mm(40)
    • 12.701 mm(66)
    • 14.0 mm(10)
    • 15.875 mm(48)
    • 16.0 mm(45)
    • 18.0 mm(8)
    • 19.05 mm(58)
    • 20.0 mm(45)
    • 25.0 mm(43)
    • 25.401 mm(56)
    • 31.75 mm(10)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.125 in(16)
    • 0.157 in(6)
    • 0.188 in(13)
    • 0.237 in(90)
    • 0.25 in(25)
    • 0.313 in(15)
    • 0.315 in(20)
    • 0.375 in(44)
    • 0.394 in(34)
    • 0.438 in(10)
    • 0.473 in(40)
    • 0.5 in(66)
    • 0.551 in(10)
    • 0.625 in(48)
    • 0.63 in(45)
    • 0.709 in(8)
    • 0.75 in(58)
    • 0.787 in(45)
    • 0.984 in(43)
    • 1.0 in(56)
    • 1.25 in(10)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""

    HARVI™ I TE • Radiused • 4 Flutes • Necked • Weldon® Shank • Inch

    (26)HARVI™ I TE • Radiused • 4 Flutes • Necked • Weldon® Shank • Inch

    HARVI™ I TE • 챔퍼형 • 4 플루트 • 단형 • Weldon® 섕크 • Metric

    (15)HARVI™ I TE • 챔퍼형 • 4 플루트 • 단형 • Weldon® 섕크 • Metric

    HARVI™ I TE • 스퀘어 엔드 • 4 플루트 • 단형 • Weldon® 섕크 • Metric

    (15)HARVI™ I TE • 스퀘어 엔드 • 4 플루트 • 단형 • Weldon® 섕크 • Metric

    HARVI™ I TE • Square End • 4 Flutes • Plain Shank • Inch

    (39)HARVI™ I TE • Square End • 4 Flutes • Plain Shank • Inch

    HARVI™ I TE • Radiused • 4 Flutes • Necked • Plain Shank • Inch

    (30)HARVI™ I TE • Radiused • 4 Flutes • Necked • Plain Shank • Inch

    HARVI™ I TE • Ball Nose • 4 Flutes • Regular • Weldon® Shank • Inch

    (4)HARVI™ I TE • Ball Nose • 4 Flutes • Regular • Weldon® Shank • Inch

    HARVI™ I TE • Ball Nose • 4 Flutes • Regular • Plain Shank • Inch

    (12)HARVI™ I TE • Ball Nose • 4 Flutes • Regular • Plain Shank • Inch

    HARVI™ I TE • Ball Nose • 4 Flutes • Long • Plain Shank • Inch

    (10)HARVI™ I TE • Ball Nose • 4 Flutes • Long • Plain Shank • Inch

    HARVI™ I TE • 볼 노즈 • 4 플루트 • 장형 • 일반 섕크 • Metric

    (10)HARVI™ I TE • 볼 노즈 • 4 플루트 • 장형 • 일반 섕크 • Metric

    HARVI™ I TE • 챔퍼 • 4 플루트 • Weldon® 섕크 • Metric

    (15)HARVI™ I TE • 챔퍼 • 4 플루트 • Weldon® 섕크 • Metric

    HARVI™ I TE • 코너R • 4 플루트 • 넥 • 일반 섕크 • Metric

    (34)HARVI™ I TE • 코너R • 4 플루트 • 넥 • 일반 섕크 • Metric

    HARVI™ I TE • 챔퍼형 • 4 플루트 • 넥 • 일반 섕크 • Metric

    (14)HARVI™ I TE • 챔퍼형 • 4 플루트 • 넥 • 일반 섕크 • Metric

    HARVI™ I TE • Radiused • 4 Flutes • Plain Shank • Inch

    (96)HARVI™ I TE • Radiused • 4 Flutes • Plain Shank • Inch

    HARVI™ I TE • 챔퍼형 • 4 플루트 • 넥형 • Weldon® 섕크 • Metric

    (14)HARVI™ I TE • 챔퍼형 • 4 플루트 • 넥형 • Weldon® 섕크 • Metric

    HARVI™ I TE • 코너R • 4 플루트 • 넥 • Weldon® 섕크 • Metric

    (34)HARVI™ I TE • 코너R • 4 플루트 • 넥 • Weldon® 섕크 • Metric

    HARVI™ I TE • Chamfered • 4 Flutes • Weldon® Shank • Inch

    (19)HARVI™ I TE • Chamfered • 4 Flutes • Weldon® Shank • Inch
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?