환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

TMS

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (82)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(82)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(82)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(82)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(82)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(82)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(82)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(82)
    • M Stainless Steel (82)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(82)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(82)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(82)
    • K Cast Iron (82)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(82)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(82)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(82)
    • S High-Temp Alloys (31)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(31)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(31)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(31)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(31)
    • H Hardened Materials (75)
      • H1
        Hardened Materials 44-48 HRC(75)
    Applications
    Applications
    • ID Thread TurningID Thread Turning (39)
    • OD Thread TurningOD Thread Turning (22)
    • Thread MillingThread Milling (37)
    • ThreadingThreading (37)
    Cutting Diameter
    Cutting Diameter
    • 0.354 in(4)
    • 0.39 in(1)
    • 0.399 in(1)
    • 0.45 in(2)
    • 0.453 in(2)
    • 0.61 in(3)
    • 0.669 in(1)
    • 0.67 in(2)
    • 0.748 in(1)
    • 0.75 in(1)
    • 0.787 in(1)
    • 0.79 in(1)
    • 0.866 in(1)
    • 0.87 in(1)
    • 0.984 in(1)
    • 1.024 in(2)
    • 1.18 in(3)
    • 1.181 in(2)
    • 1.379 in(1)
    • 1.457 in(2)
    • 1.46 in(1)
    • 1.655 in(2)
    • 1.811 in(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 9.0 mm(4)
    • 9.9 mm(1)
    • 10.125 mm(1)
    • 11.425 mm(2)
    • 11.5 mm(2)
    • 15.5 mm(3)
    • 17.0 mm(1)
    • 17.026 mm(2)
    • 19.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(1)
    • 20.076 mm(1)
    • 22.0 mm(1)
    • 22.1 mm(1)
    • 25.0 mm(1)
    • 26.0 mm(2)
    • 29.975 mm(3)
    • 30.0 mm(2)
    • 35.0 mm(1)
    • 37.0 mm(2)
    • 37.075 mm(1)
    • 42.0 mm(2)
    • 46.0 mm(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 10.4 mm(4)
    • 10.925 mm(4)
    • 11.0 mm(3)
    • 16.0 mm(13)
    • 26.925 mm(5)
    • 27.0 mm(6)
    • 38.5 mm(2)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.41 in(4)
    • 0.43 in(4)
    • 0.433 in(3)
    • 0.63 in(13)
    • 1.06 in(5)
    • 1.063 in(6)
    • 1.516 in(2)
    Cutting Length Min받는 사람Cutting Length Max
    Type of Thread
    Type of Thread
    • BSW (44)
    • M (51)
    • NPS (15)
    • NPT (23)
    • NPTF (23)
    • UN (42)
    Reach
    Reach
    • 0.472 in(1)
    • 0.473 in(3)
    • 0.61 in(2)
    • 0.669 in(2)
    • 0.787 in(1)
    • 0.79 in(1)
    • 0.807 in(1)
    • 0.866 in(2)
    • 0.87 in(2)
    • 0.906 in(1)
    • 0.909 in(1)
    • 0.984 in(1)
    • 1.0 in(1)
    • 1.341 in(1)
    • 1.575 in(1)
    • 1.68 in(1)
    • 1.69 in(1)
    • 1.693 in(2)
    • 1.77 in(1)
    • 1.772 in(1)
    • 2.031 in(2)
    • 2.047 in(1)
    • 2.165 in(1)
    • 2.283 in(1)
    • 3.531 in(1)
    • 3.622 in(1)
    • 3.858 in(1)
    • 3.938 in(1)
    • 4.0 in(1)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 11.951 mm(1)
    • 12.0 mm(3)
    • 15.5 mm(2)
    • 17.0 mm(2)
    • 20.0 mm(1)
    • 20.076 mm(1)
    • 20.5 mm(1)
    • 22.0 mm(2)
    • 22.1 mm(2)
    • 23.0 mm(1)
    • 23.1 mm(1)
    • 25.0 mm(1)
    • 25.401 mm(1)
    • 34.051 mm(1)
    • 40.0 mm(1)
    • 42.676 mm(1)
    • 42.926 mm(1)
    • 43.0 mm(2)
    • 44.95 mm(1)
    • 45.0 mm(1)
    • 51.551 mm(2)
    • 52.0 mm(1)
    • 55.0 mm(1)
    • 58.0 mm(1)
    • 89.65 mm(1)
    • 92.0 mm(1)
    • 98.0 mm(1)
    • 100.0 mm(1)
    • 101.601 mm(1)
    Reach Min받는 사람Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (20)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Weldon (37)
    Number of Flutes
    Number of Flutes
    • 1 (32)
    • 2 (5)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (24)
    • 2.0 (80)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.717 in(1)
    • 2.721 in(1)
    • 2.75 in(1)
    • 2.757 in(1)
    • 3.031 in(1)
    • 3.12 in(1)
    • 3.15 in(1)
    • 3.301 in(1)
    • 3.307 in(1)
    • 3.346 in(2)
    • 3.38 in(1)
    • 3.42 in(1)
    • 3.5 in(1)
    • 3.543 in(1)
    • 3.56 in(2)
    • 3.583 in(1)
    • 3.74 in(1)
    • 3.75 in(1)
    • 3.858 in(1)
    • 3.938 in(1)
    • 4.021 in(1)
    • 4.331 in(1)
    • 4.38 in(2)
    • 4.529 in(1)
    • 4.65 in(1)
    • 4.724 in(2)
    • 4.921 in(1)
    • 5.0 in(1)
    • 5.88 in(1)
    • 5.906 in(1)
    • 6.299 in(1)
    • 6.33 in(1)
    • 6.694 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 69.0 mm(1)
    • 69.101 mm(1)
    • 69.851 mm(1)
    • 70.0 mm(1)
    • 77.0 mm(1)
    • 79.25 mm(1)
    • 80.0 mm(1)
    • 83.825 mm(1)
    • 84.0 mm(1)
    • 85.0 mm(2)
    • 85.851 mm(1)
    • 86.875 mm(1)
    • 88.9 mm(1)
    • 90.0 mm(1)
    • 90.426 mm(2)
    • 91.0 mm(1)
    • 95.0 mm(1)
    • 95.25 mm(1)
    • 98.0 mm(1)
    • 100.0 mm(1)
    • 102.101 mm(1)
    • 110.0 mm(1)
    • 111.25 mm(2)
    • 115.0 mm(1)
    • 118.101 mm(1)
    • 120.0 mm(2)
    • 125.0 mm(1)
    • 127.0 mm(1)
    • 149.35 mm(1)
    • 150.0 mm(1)
    • 160.0 mm(1)
    • 160.775 mm(1)
    • 170.0 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC610M (40)
    • KC620M (37)
    • KC635M (75)
    Hand Of Tool
    Hand Of Tool
    • R (37)
    Wiper Insert
    Wiper Insert
    • N (47)
    Countersunk Angle
    Countersunk Angle
    • 27.5 (7)
    • 30.0 (40)
    Countersunk Angle Min받는 사람Countersunk Angle Max
    frontEnd
    Cutting Width
    Cutting Width
    • 0.33 in(1)
    • 0.34 in(1)
    • 0.351 in(3)
    • 0.36 in(1)
    • 0.37 in(1)
    • 0.38 in(3)
    • 0.39 in(5)
    • 0.4 in(1)
    • 0.411 in(1)
    • 0.52 in(3)
    • 0.55 in(5)
    • 0.56 in(3)
    • 0.571 in(7)
    • 0.58 in(4)
    • 0.59 in(4)
    • 0.709 in(1)
    • 0.91 in(1)
    • 0.941 in(1)
    • 0.965 in(1)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 8.375 mm(1)
    • 8.625 mm(1)
    • 8.9 mm(3)
    • 9.15 mm(1)
    • 9.4 mm(1)
    • 9.65 mm(3)
    • 9.9 mm(5)
    • 10.15 mm(1)
    • 10.425 mm(1)
    • 13.201 mm(3)
    • 13.976 mm(5)
    • 14.226 mm(3)
    • 14.476 mm(7)
    • 14.726 mm(4)
    • 14.976 mm(4)
    • 18.0 mm(1)
    • 23.125 mm(1)
    • 23.875 mm(1)
    • 24.5 mm(1)
    Cutting Width Min받는 사람Cutting Width Max
    Thread TPI
    Thread TPI
    • 4.5 (2)
    • 6.0 (11)
    • 7.0 (11)
    • 8.0 (11)
    • 9.0 (11)
    • 10.0 (11)
    • 11.0 (27)
    • 11.5 (16)
    • 12.0 (26)
    • 14.0 (39)
    • 16.0 (34)
    • 18.0 (29)
    • 19.0 (25)
    • 20.0 (27)
    • 24.0 (23)
    • 27.0 (14)
    • 28.0 (7)
    • 32.0 (14)
    Thread TPI Min받는 사람Thread TPI Max
    Thread Pitch
    Thread Pitch
    • 0.5 mm(7)
    • 0.75 mm(18)
    • 1.0 mm(27)
    • 1.25 mm(25)
    • 1.5 mm(39)
    • 1.75 mm(14)
    • 2.0 mm(26)
    • 2.5 mm(11)
    • 3.0 mm(12)
    • 3.5 mm(12)
    • 4.0 mm(11)
    • 4.5 mm(11)
    • 5.0 mm(2)
    Thread Pitch Min받는 사람Thread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.02 in(7)
    • 0.03 in(18)
    • 0.039 in(27)
    • 0.049 in(25)
    • 0.06 in(39)
    • 0.069 in(14)
    • 0.079 in(26)
    • 0.098 in(11)
    • 0.119 in(12)
    • 0.138 in(12)
    • 0.157 in(11)
    • 0.177 in(11)
    • 0.197 in(2)
    Thread Pitch Min받는 사람Thread Pitch Max
    Neck Diameter
    Neck Diameter
    • 0.268 in(2)
    • 0.29 in(1)
    • 0.291 in(1)
    • 0.351 in(2)
    • 0.48 in(1)
    • 0.49 in(1)
    • 0.492 in(1)
    • 0.535 in(1)
    • 0.59 in(1)
    • 0.591 in(1)
    • 0.654 in(1)
    • 0.732 in(1)
    • 0.748 in(1)
    • 0.886 in(1)
    • 0.941 in(1)
    • 0.946 in(2)
    • 1.063 in(1)
    • 1.22 in(2)
    • 1.417 in(1)
    • 1.496 in(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 6.801 mm(2)
    • 7.375 mm(1)
    • 7.4 mm(1)
    • 8.9 mm(2)
    • 12.201 mm(1)
    • 12.451 mm(1)
    • 12.5 mm(1)
    • 13.601 mm(1)
    • 14.976 mm(1)
    • 15.0 mm(1)
    • 16.6 mm(1)
    • 18.6 mm(1)
    • 19.0 mm(1)
    • 22.5 mm(1)
    • 23.875 mm(1)
    • 24.0 mm(2)
    • 27.0 mm(1)
    • 31.0 mm(2)
    • 36.0 mm(1)
    • 38.0 mm(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    insertGeometry
    Shape
    Shape
    • TM-TRIANGLE THREAD MILL 60 (47)
    Insert IC Size
    Insert IC Size
    • 6.0 mm(6)
    • 6.351 mm(11)
    • 9.525 mm(26)
    • 12.701 mm(1)
    • 15.875 mm(3)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.237 in(6)
    • 0.25 in(11)
    • 0.375 in(26)
    • 0.5 in(1)
    • 0.625 in(3)
    Insert IC Size Min받는 사람Insert IC Size Max
    Cutting Tool Material
    Cutting Tool Material
    • H W (47)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (37)
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(2)
    • 12.701 mm(2)
    • 15.875 mm(2)
    • 16.0 mm(3)
    • 19.05 mm(6)
    • 20.0 mm(5)
    • 25.0 mm(5)
    • 25.401 mm(5)
    • 31.75 mm(2)
    • 32.0 mm(4)
    • 40.0 mm(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.473 in(2)
    • 0.5 in(2)
    • 0.625 in(2)
    • 0.63 in(3)
    • 0.75 in(6)
    • 0.787 in(5)
    • 0.984 in(5)
    • 1.0 in(5)
    • 1.25 in(2)
    • 1.26 in(4)
    • 1.575 in(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""

    인서트

    (47)인서트

    평행 나사산 밀

    (25)평행 나사산 밀

    테이퍼형 나사산 밀

    (12)테이퍼형 나사산 밀
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?