KM™ Mini
필터
필터
필터 보기 위치
MetricInch
Workpiece Material
Workpiece Material
- P Steel (158)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(158)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(158)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(158)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(158)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(158)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(158)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(158)
- M Stainless Steel (156)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(156)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(156)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(156)
- K Cast Iron (158)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(158)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(158)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(158)
- N Non-Ferrous Materials (155)
- N1Wrought Aluminum (155)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(155)
- N3High-Silicon Aluminum Alloys Si >12.2%(120)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (155)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (155)
- N6Carbon, Graphite Composites, CFRP (155)
- N7MMC's (128)
- S High-Temp Alloys (156)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(156)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(156)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(156)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(156)
- H Hardened Materials (139)
- H1Hardened Materials 44-48 HRC(139)
- H2Hardened Materials 48-55 HRC(139)
- H3Hardened Materials 56-60 HRC(133)
- H4Hardened Materials >60 HRC(116)
- C CFRP Materials (102)
- C1CFRP, CFRP / CFRP (102)
- C2CFRP / Aluminium CFRP / Non-Ferrous (83)
Applications
Applications
- Chamfer Turning (9)
- Cut-Off (8)
- Deep Grooving (8)
- Face Grooving (8)
- Facing (38)
- Grooving (41)
- ID Grooving (7)
- ID Thread Turning (11)
- Multiple Direction Cutting (94)
- OD Thread Turning (28)
- Plunge Turning (11)
- Profiling (97)
- TRN Boring (23)
- Threading (21)
- Turning (79)
Type of Thread
Type of Thread
- 55 (12)
- 60 (35)
- ACME (26)
- API (16)
- API BUTTRESS (2)
- API RD (20)
- BSPT (10)
- BSW (22)
- BUTTRESS (23)
- M (27)
- NPT (20)
- NPTF (10)
- RD DIN 405 (12)
- STUB ACME (22)
- TR DIN 103 (12)
- UN (33)
- UNJ (20)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (146)
- Lightly Interrupted Cut (146)
- Smooth Cut (146)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (3)
- 62.5 (7)
- 75.0 (6)
- 90.0 (59)
- 93.0 (49)
- 95.0 (27)
- 107.5 (9)
받는 사람
Connection Style
Connection Style
- KM (160)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (5)
- 1.0 (103)
- 2.0 (111)
- 3.0 (33)
- 4.0 (57)
- 6.0 (20)
- 8.0 (26)
받는 사람
Over All Length [L]
Over All Length [L]
- 0.046 in(1)
- 0.984 in(35)
- 1.181 in(123)
- 1.379 in(1)
- 3.516 in(1)
- 3.819 in(2)
- 3.938 in(2)
- 4.724 in(1)
- 4.819 in(2)
받는 사람
Over All Length [L]
Over All Length [L]
- 1.175 mm(1)
- 25.0 mm(35)
- 30.0 mm(123)
- 35.0 mm(1)
- 89.301 mm(1)
- 97.0 mm(2)
- 100.0 mm(2)
- 120.0 mm(1)
- 122.4 mm(2)
받는 사람
Corner Radius
Corner Radius
- 0.0 in(9)
- 0.001 in(19)
- 0.002 in(46)
- 0.003 in(33)
- 0.004 in(101)
- 0.005 in(14)
- 0.006 in(23)
- 0.007 in(23)
- 0.008 in(125)
- 0.01 in(23)
- 0.011 in(18)
- 0.012 in(14)
- 0.014 in(22)
- 0.015 in(4)
- 0.016 in(121)
- 0.017 in(2)
- 0.019 in(14)
- 0.02 in(19)
- 0.021 in(2)
- 0.023 in(14)
- 0.024 in(8)
- 0.028 in(1)
- 0.03 in(13)
- 0.031 in(125)
- 0.034 in(4)
- 0.035 in(14)
- 0.037 in(1)
- 0.039 in(24)
- -0.039 in(5)
- 0.041 in(4)
- 0.047 in(115)
- 0.049 in(19)
- 0.06 in(25)
- 0.062 in(18)
- 0.063 in(82)
- 0.069 in(19)
- 0.078 in(10)
- 0.079 in(18)
- 0.08 in(4)
- 0.089 in(14)
- 0.094 in(15)
- 0.095 in(30)
- 0.098 in(6)
- 0.099 in(2)
- 0.125 in(9)
- 0.126 in(5)
- 0.188 in(2)
- 0.197 in(1)
- 0.25 in(1)
받는 사람
Corner Radius
Corner Radius
- 0.0 mm(9)
- 0.025 mm(19)
- 0.05 mm(46)
- 0.076 mm(33)
- 0.1 mm(101)
- 0.125 mm(14)
- 0.151 mm(23)
- 0.176 mm(23)
- 0.2 mm(125)
- 0.225 mm(14)
- 0.25 mm(23)
- 0.275 mm(18)
- 0.301 mm(14)
- 0.325 mm(18)
- 0.351 mm(18)
- 0.375 mm(4)
- 0.4 mm(121)
- 0.426 mm(2)
- 0.45 mm(14)
- 0.476 mm(5)
- 0.5 mm(19)
- 0.525 mm(2)
- 0.576 mm(14)
- 0.601 mm(8)
- 0.701 mm(1)
- 0.75 mm(13)
- 0.775 mm(19)
- 0.8 mm(106)
- 0.851 mm(4)
- 0.9 mm(14)
- 0.925 mm(1)
- 1.0 mm(24)
- -1.0 mm(5)
- 1.05 mm(4)
- 1.201 mm(115)
- 1.25 mm(19)
- 1.5 mm(24)
- 1.526 mm(6)
- 1.576 mm(18)
- 1.6 mm(82)
- 1.75 mm(19)
- 1.975 mm(10)
- 2.0 mm(18)
- 2.025 mm(4)
- 2.25 mm(14)
- 2.375 mm(15)
- 2.401 mm(30)
- 2.5 mm(6)
- 2.526 mm(2)
- 3.176 mm(9)
- 3.2 mm(5)
- 4.775 mm(2)
- 5.0 mm(1)
- 6.351 mm(1)
받는 사람
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (47)
- 241 (8)
- CL4 (23)
- CM2 (47)
- CM3 (28)
- CM4 (19)
- CPX (39)
- CW2 (17)
- CW2015 (45)
- CW5025 (48)
- GH1 (9)
- GX (19)
- HCK10 (15)
- HCK20 (1)
- HK1500 (55)
- HK35 (13)
- HT2 (48)
- HTX (41)
- HWK15 (16)
- K00331 (5)
- K060 (30)
- K090 (50)
- K1 (13)
- K1010P (9)
- K1025 (4)
- K10M (80)
- K10P (71)
- K10U (83)
- K15 (2)
- K15U (81)
- K20K (75)
- K21 (24)
- K25M (79)
- K25P (71)
- K2885 (19)
- K313 (136)
- K35P (39)
- K420 (75)
- K45 (43)
- K4H (14)
- K68 (108)
- KB1340 (23)
- KB1345 (53)
- KB1610 (65)
- KB1625 (55)
- KB1630 (63)
- KB5610 (57)
- KB5625 (81)
- KB5630 (46)
- KB9610 (72)
- KB9640 (32)
- KBH10 (73)
- KBH10B (36)
- KBH20 (93)
- KBH20B (36)
- KBK35 (8)
- KC210 (34)
- KC250 (49)
- KC5010 (153)
- KC5020P (18)
- KC5025 (151)
- KC5410 (106)
- KC5510 (66)
- KC5525 (47)
- KC710 (38)
- KC720 (115)
- KC722 (36)
- KC730 (131)
- KC7310 (70)
- KC732 (89)
- KC8050 (104)
- KC810 (117)
- KC850 (125)
- KC9010 (85)
- KC9025 (99)
- KC910 (101)
- KC9105 (94)
- KC9110 (142)
- KC9120 (97)
- KC9125 (119)
- KC9125RR (6)
- KC9140 (71)
- KC9145 (51)
- KC9210 (4)
- KC9215 (70)
- KC9225 (100)
- KC9240 (101)
- KC9240NEW (101)
- KC9245 (70)
- KC9315 (102)
- KC9320 (121)
- KC9325 (88)
- KC935 (126)
- KC950 (102)
- KC990 (90)
- KCD25 (39)
- KCK05 (101)
- KCK05B (92)
- KCK15 (91)
- KCK15B (96)
- KCK20 (127)
- KCK20B (121)
- KCM15 (98)
- KCM15B (90)
- KCM25 (101)
- KCM25B (94)
- KCM25S (14)
- KCM35 (81)
- KCM35B (50)
- KCP05 (96)
- KCP05B (76)
- KCP10 (118)
- KCP10B (126)
- KCP15 (5)
- KCP20S (14)
- KCP25 (120)
- KCP25B (126)
- KCP25C (127)
- KCP30 (100)
- KCP30B (55)
- KCP40 (47)
- KCP40B (67)
- KCPK05 (64)
- KCS10 (39)
- KCS10B (88)
- KCS25S (14)
- KCU10 (140)
- KCU10B (141)
- KCU25 (137)
- KCU25B (139)
- KD050 (58)
- KD081 (63)
- KD100 (44)
- KD120 (57)
- KD1400 (66)
- KD1405 (43)
- KD1425 (76)
- KM1 (24)
- KMF (8)
- KMS (7)
- KN10S (18)
- KS15 (8)
- KT1120 (14)
- KT125 (56)
- KT150 (38)
- KT175 (90)
- KT315 (139)
- KT325 (54)
- KT5020 (13)
- KTP10 (87)
- KTP25S (72)
- KU10 (38)
- KU10T (119)
- KU25T (28)
- KU30T (133)
- KY1310 (38)
- KY1320 (55)
- KY1540 (30)
- KY1615 (50)
- KY2000 (30)
- KY2100 (25)
- KY3000 (61)
- KY3400 (43)
- KY3500 (66)
- KY4000 (22)
- KY4300 (19)
- KY4400 (56)
- KYHK15B (56)
- KYK10 (38)
- KYK25 (43)
- KYK35 (55)
- KYS25 (25)
- KYS30 (35)
- NL200 (12)
- NL250 (64)
- NL300 (29)
- NL400 (16)
- NL920 (54)
- P25 (21)
- PB100 (20)
- PB170 (12)
- PB250 (21)
- PB300 (8)
- PD100 (15)
- PD50 (10)
- PN120 (4)
- PS5 (21)
- SP0819 (30)
- SP0A00 (6)
- SP0G00 (1)
- SP0PW3 (1)
- SP3019 (32)
- SP4019 (43)
- SP4036 (8)
- SP4066 (1)
- SP4093 (8)
- SP61EJ (6)
- SPN3W1 (5)
- THM (70)
- THM-X (31)
- THMF-X (19)
- TN10P (112)
- TN10U (81)
- TN15M (85)
- TN15U (77)
- TN2000 (56)
- TN20K (84)
- TN20P (97)
- TN30M (94)
- TN30P (45)
- TN4000 (47)
- TN5015 (71)
- TN5020 (69)
- TN5105 (75)
- TN5120 (81)
- TN6010 (72)
- TN6025 (83)
- TN7005 (64)
- TN7010 (85)
- TN7015 (85)
- TN7025 (85)
- TN7035 (61)
- TN7105 (59)
- TN7110 (104)
- TN7115 (81)
- TN7125 (70)
- TN7135 (61)
- TN8025 (77)
- TTI15 (39)
- TTM (10)
- TTM09 (23)
- TTR (41)
- TTS (30)
- TTX (40)
- W00342 (12)
- WBH10C (62)
- WBH10P (46)
- WBH10U (65)
- WBH20P (66)
- WBH25P (57)
- WBH25U (49)
- WBH30P (46)
- WBK40U (23)
- WBK45U (44)
- WDN00U (24)
- WDN25U (64)
- WK05CT (86)
- WK15CT (55)
- WK20CT (92)
- WM15CT (90)
- WM25CT (92)
- WM35CT (64)
- WP05CT (16)
- WP15CT (96)
- WP20TT (18)
- WP25CT (96)
- WP35CT (89)
- WS10PT (84)
- WS25PT (83)
- WU05PT (18)
- WU10HT (92)
- WU10PT (82)
- WU25PT (77)
- X00511 (8)
- X00580 (8)
- X00581 (8)
- X00582 (8)
- X00583 (8)
- X00584 (8)
- X00585 (8)
- X00586 (8)
- X00591 (8)
- X00592 (8)
- X00593 (8)
- X00594 (8)
- X00596 (8)
- X00597 (8)
- X00599 (8)
Hand Of Tool
Hand Of Tool
- L (76)
- N (7)
- R (77)
Wiper Insert
Wiper Insert
- N (158)
- Y (46)
F Dimension
F Dimension
- 0.0 mm(6)
- 7.351 mm(1)
- 12.5 mm(35)
- 13.0 mm(1)
- 16.0 mm(38)
- 17.0 mm(8)
- 22.0 mm(43)
- 24.0 mm(2)
- 25.3 mm(1)
- 27.0 mm(8)
- 28.5 mm(2)
받는 사람
F Dimension
F Dimension
- 0.0 in(6)
- 0.289 in(1)
- 0.492 in(35)
- 0.512 in(1)
- 0.63 in(38)
- 0.669 in(8)
- 0.866 in(43)
- 0.946 in(2)
- 0.996 in(1)
- 1.063 in(8)
- 1.122 in(2)
받는 사람
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(19)
- -1.0 mm(3)
- 40.0 mm(28)
- 41.301 mm(8)
- 47.6 mm(8)
- 50.0 mm(8)
- 56.625 mm(8)
- 57.2 mm(3)
- 88.9 mm(16)
- 120.0 mm(1)
- 139.701 mm(8)
- 174.601 mm(8)
- 209.601 mm(3)
- 222.3 mm(3)
받는 사람
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(19)
- -0.039 in(3)
- 1.575 in(28)
- 1.627 in(8)
- 1.874 in(8)
- 1.969 in(8)
- 2.229 in(8)
- 2.253 in(3)
- 3.5 in(16)
- 4.724 in(1)
- 5.5 in(8)
- 6.875 in(8)
- 8.252 in(3)
- 8.752 in(3)
받는 사람
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -0.039 in(5)
- 393.661 in(23)
받는 사람
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(5)
- 9999.0 mm(23)
받는 사람
Cutting Direction
Cutting Direction
- B (28)
- E (58)
- S (73)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (82)
- NEGATIVE-ZERO (5)
- NEUTRAL (ZERO) (68)
- POSITIVE-ZERO (5)
Boring Bar Material
Boring Bar Material
- S (36)
frontEnd
Adapter Front-End
Adapter Front-End
- BORING BAR ADAPTER (5)
- CUTOFF SUPPORT BLADE (4)
- ER COLLET CHUCK (3)
- EXTENSION (1)
- KM MODULAR ADAPTER (22)
- REDUCER (2)
Clamp Style
Clamp Style
- C (8)
- M (69)
- N (23)
- P (5)
- S (35)
- Y (19)
Cutting Width
Cutting Width
- 0.02 in(9)
- 0.031 in(9)
- 0.035 in(9)
- 0.039 in(19)
- 0.041 in(9)
- 0.047 in(19)
- 0.055 in(9)
- 0.058 in(9)
- 0.06 in(22)
- 0.062 in(19)
- 0.067 in(9)
- 0.069 in(19)
- 0.073 in(10)
- 0.077 in(9)
- 0.078 in(10)
- 0.079 in(23)
- 0.084 in(4)
- 0.088 in(19)
- 0.089 in(14)
- 0.094 in(6)
- 0.095 in(20)
- 0.097 in(11)
- 0.098 in(20)
- 0.104 in(1)
- 0.105 in(10)
- 0.108 in(19)
- 0.11 in(10)
- 0.119 in(28)
- 0.12 in(5)
- 0.122 in(15)
- 0.123 in(5)
- 0.125 in(28)
- 0.126 in(23)
- 0.128 in(19)
- 0.129 in(9)
- 0.13 in(5)
- 0.131 in(5)
- 0.138 in(23)
- 0.143 in(10)
- 0.147 in(5)
- 0.15 in(4)
- 0.151 in(5)
- 0.152 in(9)
- 0.156 in(10)
- 0.157 in(18)
- 0.161 in(4)
- 0.162 in(4)
- 0.167 in(14)
- 0.169 in(10)
- 0.177 in(14)
- 0.178 in(10)
- 0.185 in(12)
- 0.187 in(4)
- 0.188 in(14)
- 0.189 in(14)
- 0.192 in(5)
- 0.193 in(9)
- 0.195 in(10)
- 0.196 in(10)
- 0.197 in(6)
- 0.199 in(2)
- 0.201 in(2)
- 0.202 in(6)
- 0.213 in(4)
- 0.217 in(4)
- 0.219 in(4)
- 0.237 in(4)
- 0.25 in(4)
- 0.256 in(4)
받는 사람
Cutting Width
Cutting Width
- 0.5 mm(9)
- 0.775 mm(9)
- 0.8 mm(9)
- 0.9 mm(9)
- 1.0 mm(19)
- 1.05 mm(9)
- 1.201 mm(19)
- 1.401 mm(9)
- 1.475 mm(9)
- 1.5 mm(22)
- 1.576 mm(19)
- 1.701 mm(9)
- 1.75 mm(19)
- 1.826 mm(10)
- 1.951 mm(9)
- 1.975 mm(10)
- 2.0 mm(23)
- 2.125 mm(4)
- 2.2 mm(19)
- 2.225 mm(19)
- 2.25 mm(14)
- 2.375 mm(6)
- 2.401 mm(20)
- 2.475 mm(11)
- 2.5 mm(20)
- 2.625 mm(1)
- 2.676 mm(10)
- 2.75 mm(19)
- 2.801 mm(10)
- 3.0 mm(28)
- 3.051 mm(5)
- 3.1 mm(15)
- 3.125 mm(5)
- 3.176 mm(28)
- 3.2 mm(23)
- 3.25 mm(19)
- 3.276 mm(9)
- 3.301 mm(5)
- 3.325 mm(5)
- 3.5 mm(23)
- 3.6 mm(10)
- 3.725 mm(5)
- 3.801 mm(4)
- 3.825 mm(5)
- 3.85 mm(9)
- 3.95 mm(10)
- 3.975 mm(5)
- 4.0 mm(18)
- 4.101 mm(4)
- 4.125 mm(4)
- 4.25 mm(14)
- 4.3 mm(10)
- 4.5 mm(14)
- 4.525 mm(10)
- 4.7 mm(12)
- 4.75 mm(4)
- 4.775 mm(14)
- 4.801 mm(14)
- 4.875 mm(5)
- 4.9 mm(9)
- 4.95 mm(10)
- 4.976 mm(10)
- 5.0 mm(6)
- 5.051 mm(2)
- 5.101 mm(2)
- 5.125 mm(6)
- 5.4 mm(4)
- 5.5 mm(4)
- 5.575 mm(4)
- 6.0 mm(4)
- 6.351 mm(4)
- 6.5 mm(4)
받는 사람
Front End Type
Front End Type
- KMM - KM Micro System (6)
- KMS - KM TBD System (19)
- PMK - Prismatic Adapter Kenna (4)
- SZK - Collet Taper (3)
- ZYL - Cylindrical Adapter (5)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (20)
- D-DIAMOND/RHOMBIC 55 (35)
- LT-TRIANGLE LAY DOWN THREAD 60 (12)
- PRISMATIC (19)
- R-ROUND (4)
- S-SQUARE 90 (7)
- T-TRIANGLE 60 (13)
- TN-TOP NOTCH (23)
- V-DIAMOND/RHOMBIC 35 (17)
- W-TRIGON 80 (10)
Front End Style
Front End Style
- KMM01 Std Km-Micro Size (4)
- KMM02 Enlarged Flange (2)
- KMS-01 Std KM-TBD NotOnCntr (6)
- KMS-02 Englarged Flange OnCntr (13)
- PMK03 CutOffBld A1-A3 Hlfw/Pin (4)
- SZK02 Collets 8 Degree Taper (3)
- ZYL22 Boring Bar Shank (5)
Insert Size
Insert Size
- 1 (3)
- 2 (13)
- 2B (1)
- 3 (15)
- 4 (8)
- 5 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 in(13)
- 0.138 in(5)
- 0.21 in(5)
- 0.354 in(1)
- 0.404 in(3)
- 0.531 in(3)
- 0.551 in(11)
- 0.748 in(1)
받는 사람
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 mm(13)
- 3.5 mm(5)
- 5.325 mm(5)
- 9.0 mm(1)
- 10.25 mm(3)
- 13.5 mm(3)
- 14.0 mm(11)
- 19.0 mm(1)
받는 사람
Gage Length
Gage Length
- 3 in(1)
- 0.189 in(2)
- 0.709 in(1)
- 0.787 in(1)
- 0.984 in(5)
- 1.102 in(2)
- 1.181 in(2)
- 1.238 in(1)
- 1.26 in(1)
- 1.379 in(1)
- 1.575 in(1)
- 1.772 in(2)
- 2.165 in(1)
- 2.362 in(2)
- 2.559 in(1)
- 2.757 in(1)
- 3.516 in(1)
- 3.543 in(2)
- 3.819 in(2)
- 3.938 in(2)
- 4.724 in(1)
- 4.819 in(2)
- 5.906 in(1)
- 6.016 in(1)
Gage Length
Gage Length
- 25 mm(5)
- 100 mm(2)
- 28 mm(2)
- 30 mm(2)
- 45 mm(2)
- 60 mm(2)
- 90 mm(2)
- 97 mm(2)
- 120 mm(1)
- 150 mm(1)
- 18 mm(1)
- 20 mm(1)
- 32 mm(1)
- 35 mm(1)
- 40 mm(1)
- 55 mm(1)
- 65 mm(1)
- 70 mm(1)
- 4.801 mm(2)
- 31.451 mm(1)
- 76.2 mm(1)
- 89.301 mm(1)
- 122.4 mm(2)
- 152.8 mm(1)
Front End Size
Front End Size
- 0.237 in(1)
- 0.394 in(1)
- 0.473 in(1)
- 0.63 in(1)
- 0.787 in(5)
- 0.984 in(10)
- 1.26 in(8)
받는 사람
Front End Size
Front End Size
- 6.0 mm(1)
- 10.0 mm(1)
- 12.0 mm(1)
- 16.0 mm(1)
- 20.0 mm(5)
- 25.0 mm(10)
- 32.0 mm(8)
받는 사람
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (111)
- B L (103)
- C A (58)
- C N (87)
- D P (94)
- H T (139)
- H W (158)
backEnd
Connection Type
Connection Type
- TAPER SHANK (160)
System Size
System Size
- KM20 (52)
- KM25 (76)
- KM3225 (47)
Back-End Diameter
Back-End Diameter
- 18.0 mm(1)
- 19.05 mm(1)
- 20.0 mm(53)
- 24.0 mm(1)
- 25.0 mm(77)
- 25.401 mm(2)
- 31.75 mm(2)
- 32.0 mm(47)
- 38.1 mm(1)
받는 사람
Back-End Diameter
Back-End Diameter
- 0.709 in(1)
- 0.75 in(1)
- 0.787 in(53)
- 0.946 in(1)
- 0.984 in(77)
- 1.0 in(2)
- 1.25 in(2)
- 1.26 in(47)
- 1.5 in(1)
받는 사람
No filters matching ""