KM80TS™
필터
필터
필터 보기 위치
MetricInch
Workpiece Material
Workpiece Material
- P Steel (73)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(73)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(73)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(73)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(73)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(73)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(73)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(73)
- M Stainless Steel (68)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(68)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(68)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(68)
- K Cast Iron (75)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(75)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(75)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(75)
- N Non-Ferrous Materials (57)
- N1Wrought Aluminum (57)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(56)
- N3High-Silicon Aluminum Alloys Si >12.2%(30)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (57)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (56)
- N6Carbon, Graphite Composites, CFRP (56)
- N7MMC's (55)
- S High-Temp Alloys (66)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(66)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(66)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(66)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(63)
- H Hardened Materials (54)
- H1Hardened Materials 44-48 HRC(54)
- H2Hardened Materials 48-55 HRC(54)
- H3Hardened Materials 56-60 HRC(54)
- H4Hardened Materials >60 HRC(37)
- C CFRP Materials (48)
- C1CFRP, CFRP / CFRP (48)
- C2CFRP / Aluminium CFRP / Non-Ferrous (48)
Applications
Applications
- Chamfer Turning (1)
- Cut-Off (1)
- Deep Grooving (1)
- Face Grooving (1)
- Facing (49)
- Grooving (9)
- ID Grooving (8)
- ID Thread Turning (8)
- Multiple Direction Cutting (53)
- OD Thread Turning (9)
- Plunge Turning (1)
- Profiling (37)
- TRN Boring (48)
- Threading (9)
- Turning (68)
Type of Thread
Type of Thread
- 60 (5)
- ACME (7)
- API (5)
- API RD (5)
- BSW (3)
- BUTTRESS (5)
- M (3)
- NPT (3)
- STUB ACME (3)
- UN (5)
- UNJ (3)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (69)
- Lightly Interrupted Cut (74)
- Smooth Cut (75)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (5)
- 62.5 (1)
- 75.0 (15)
- 90.0 (15)
- 93.0 (14)
- 95.0 (21)
- 107.5 (5)
받는 사람
Connection Style
Connection Style
- KM (40)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (41)
- 2.0 (52)
- 3.0 (2)
- 4.0 (59)
- 6.0 (2)
- 8.0 (42)
받는 사람
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.757 in(74)
- 3.15 in(2)
받는 사람
Over All Length [L]
Over All Length [L]
- 70.0 mm(74)
- 80.0 mm(2)
받는 사람
Corner Radius
Corner Radius
- 0.002 in(3)
- 0.003 in(5)
- 0.004 in(29)
- 0.005 in(3)
- 0.006 in(5)
- 0.007 in(5)
- 0.008 in(20)
- 0.01 in(5)
- 0.011 in(3)
- 0.012 in(3)
- 0.014 in(18)
- 0.016 in(39)
- 0.019 in(5)
- 0.02 in(3)
- 0.023 in(7)
- 0.024 in(2)
- 0.031 in(52)
- 0.033 in(4)
- 0.035 in(5)
- 0.039 in(3)
- 0.047 in(52)
- 0.049 in(3)
- 0.06 in(3)
- 0.062 in(7)
- 0.063 in(63)
- 0.069 in(3)
- 0.078 in(3)
- 0.079 in(5)
- 0.089 in(5)
- 0.094 in(23)
- 0.095 in(38)
- 0.098 in(2)
- 0.125 in(2)
- 0.126 in(20)
- 0.157 in(7)
- 0.394 in(1)
- 0.492 in(3)
- 0.63 in(2)
받는 사람
Corner Radius
Corner Radius
- 0.05 mm(3)
- 0.076 mm(5)
- 0.1 mm(29)
- 0.125 mm(3)
- 0.151 mm(5)
- 0.176 mm(5)
- 0.2 mm(20)
- 0.225 mm(3)
- 0.25 mm(5)
- 0.275 mm(3)
- 0.301 mm(3)
- 0.325 mm(7)
- 0.351 mm(16)
- 0.4 mm(39)
- 0.45 mm(5)
- 0.476 mm(2)
- 0.5 mm(3)
- 0.576 mm(7)
- 0.601 mm(2)
- 0.775 mm(3)
- 0.8 mm(49)
- 0.826 mm(4)
- 0.9 mm(5)
- 1.0 mm(3)
- 1.201 mm(52)
- 1.25 mm(3)
- 1.5 mm(3)
- 1.576 mm(7)
- 1.6 mm(63)
- 1.75 mm(3)
- 1.975 mm(3)
- 2.0 mm(5)
- 2.25 mm(5)
- 2.375 mm(23)
- 2.401 mm(38)
- 2.5 mm(2)
- 3.176 mm(2)
- 3.2 mm(20)
- 4.0 mm(7)
- 10.0 mm(1)
- 12.5 mm(3)
- 16.0 mm(2)
받는 사람
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (38)
- 241 (4)
- CG4 (1)
- CL4 (31)
- CM2 (37)
- CM3 (31)
- CM4 (10)
- CM5 (1)
- CPX (43)
- CW2 (15)
- CW2015 (31)
- CW3020 (2)
- CW5025 (33)
- GX (20)
- HK1500 (19)
- HT2 (15)
- HTX (4)
- K060 (12)
- K090 (47)
- K1 (25)
- K10M (47)
- K10P (40)
- K10U (26)
- K15U (26)
- K20K (47)
- K21 (19)
- K25M (32)
- K25P (41)
- K2885 (3)
- K313 (53)
- K35P (32)
- K420 (52)
- K45 (13)
- K4H (3)
- K68 (55)
- KB1340 (6)
- KB1345 (15)
- KB1610 (15)
- KB1625 (13)
- KB1630 (18)
- KB5610 (15)
- KB5625 (16)
- KB5630 (13)
- KB9610 (26)
- KB9640 (8)
- KBH10 (26)
- KBH10B (24)
- KBH20 (28)
- KBH20B (24)
- KBK35 (6)
- KBK45 (2)
- KC210 (36)
- KC250 (34)
- KC5010 (66)
- KC5025 (56)
- KC5410 (52)
- KC5510 (47)
- KC5525 (23)
- KC710 (9)
- KC720 (33)
- KC722 (9)
- KC730 (44)
- KC7310 (47)
- KC732 (24)
- KC8050 (60)
- KC810 (56)
- KC850 (69)
- KC9010 (50)
- KC9025 (59)
- KC910 (50)
- KC9105 (40)
- KC9110 (67)
- KC9120 (61)
- KC9125 (62)
- KC9140 (59)
- KC9145 (58)
- KC9210 (11)
- KC9215 (47)
- KC9225 (47)
- KC9240 (62)
- KC9240NEW (57)
- KC9245 (47)
- KC9315 (48)
- KC9320 (52)
- KC9325 (47)
- KC935 (57)
- KC950 (58)
- KC990 (53)
- KCD25 (6)
- KCK05 (47)
- KCK05B (47)
- KCK15 (47)
- KCK15B (48)
- KCK20 (53)
- KCK20B (58)
- KCM15 (47)
- KCM15B (40)
- KCM25 (55)
- KCM25B (54)
- KCM35 (47)
- KCM35B (38)
- KCP05 (32)
- KCP05B (32)
- KCP10 (62)
- KCP10B (60)
- KCP25 (62)
- KCP25B (68)
- KCP25C (70)
- KCP30 (60)
- KCP30B (56)
- KCP40 (56)
- KCP40B (59)
- KCPK05 (48)
- KCS10 (5)
- KCS10B (47)
- KCU10 (66)
- KCU10B (55)
- KCU25 (56)
- KCU25B (55)
- KD050 (15)
- KD081 (16)
- KD100 (17)
- KD120 (18)
- KD1400 (15)
- KD1405 (13)
- KD1425 (18)
- KM1 (12)
- KMF (4)
- KS15 (4)
- KT1120 (7)
- KT125 (24)
- KT150 (13)
- KT175 (27)
- KT315 (31)
- KT325 (15)
- KT5020 (3)
- KTP10 (26)
- KTP25S (26)
- KU10T (31)
- KU25T (5)
- KU30T (52)
- KY1310 (20)
- KY1320 (42)
- KY1525 (2)
- KY1540 (20)
- KY1615 (41)
- KY2000 (26)
- KY2100 (12)
- KY3000 (52)
- KY3400 (35)
- KY3500 (49)
- KY4000 (13)
- KY4300 (26)
- KY4400 (42)
- KYHK15B (42)
- KYK10 (14)
- KYK25 (28)
- KYK35 (49)
- KYS25 (20)
- KYS30 (22)
- MC2 (1)
- NL200 (15)
- NL250 (47)
- NL300 (49)
- NL400 (26)
- NL920 (29)
- P25 (4)
- PB100 (2)
- PB170 (2)
- PB250 (2)
- PB300 (2)
- PS5 (15)
- SP0819 (38)
- SP3019 (27)
- SP4019 (26)
- SP4036 (3)
- SP4093 (3)
- SPADAP (26)
- SPN4W2 (7)
- THM (20)
- THM-X (10)
- THMF-X (2)
- TN10P (35)
- TN10U (19)
- TN15M (38)
- TN15U (19)
- TN2000 (27)
- TN20K (38)
- TN20P (38)
- TN30M (38)
- TN30P (40)
- TN4000 (27)
- TN5015 (33)
- TN5020 (30)
- TN5105 (16)
- TN5120 (35)
- TN6010 (22)
- TN6025 (19)
- TN7005 (16)
- TN7010 (36)
- TN7015 (47)
- TN7025 (47)
- TN7035 (31)
- TN7105 (11)
- TN7110 (33)
- TN7115 (47)
- TN7125 (42)
- TN7135 (31)
- TN8025 (46)
- TTI15 (9)
- TTM09 (7)
- TTR (3)
- TTR-X (7)
- TTS (24)
- TTX (9)
- W00342 (7)
- WBH10C (19)
- WBH10P (10)
- WBH10U (12)
- WBH20P (19)
- WBH25P (10)
- WBH25U (14)
- WBH30P (10)
- WBK40U (4)
- WBK45U (14)
- WDN00U (7)
- WDN25U (12)
- WK05CT (38)
- WK15CT (11)
- WK20CT (38)
- WM15CT (38)
- WM25CT (45)
- WM35CT (38)
- WP05CT (4)
- WP15CT (50)
- WP25CT (50)
- WP35CT (50)
- WS10PT (38)
- WS25PT (38)
- WU10HT (33)
- WU10PT (16)
- WU25PT (15)
- X00511 (4)
- X00580 (4)
- X00581 (4)
- X00582 (4)
- X00583 (4)
- X00584 (4)
- X00585 (4)
- X00586 (4)
- X00591 (4)
- X00592 (4)
- X00593 (4)
- X00594 (4)
- X00596 (4)
- X00597 (4)
- X00599 (4)
Hand Of Tool
Hand Of Tool
- L (15)
- N (7)
- R (18)
Wiper Insert
Wiper Insert
- N (76)
- Y (24)
F Dimension
F Dimension
- 0.0 mm(5)
- 10.0 mm(1)
- 12.5 mm(1)
- 48.0 mm(9)
- 53.0 mm(24)
받는 사람
F Dimension
F Dimension
- 0.0 in(5)
- 0.394 in(1)
- 0.492 in(1)
- 1.891 in(9)
- 2.087 in(24)
받는 사람
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(1)
- 41.301 mm(1)
- 47.6 mm(1)
- 88.9 mm(1)
- 100.0 mm(7)
- 106.0 mm(40)
- 139.701 mm(1)
- 150.0 mm(1)
- 174.601 mm(1)
받는 사람
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(1)
- 1.627 in(1)
- 1.874 in(1)
- 3.5 in(1)
- 3.938 in(7)
- 4.173 in(40)
- 5.5 in(1)
- 5.906 in(1)
- 6.875 in(1)
받는 사람
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 393.661 in(8)
받는 사람
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(8)
받는 사람
Cutting Direction
Cutting Direction
- B (10)
- E (3)
- S (27)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (30)
- NEGATIVE-ZERO (3)
- NEUTRAL (ZERO) (5)
Maximum Bore Depth
Maximum Bore Depth
- 2.757 in(48)
받는 사람
Maximum Bore Depth
Maximum Bore Depth
- 70.0 mm(48)
받는 사람
Boring Bar Material
Boring Bar Material
- S (10)
frontEnd
Adapter Front-End
Adapter Front-End
- BORING BAR ADAPTER (5)
- CARTRIDGE MOUNT (26)
- COMBI SHELL ADAPTER (1)
- DRILL SHANK 2 FLATS (3)
- END MILL ADAPTER (13)
- ER COLLET CHUCK (3)
- EXTENSION (2)
- REDUCER (5)
- SCREW-ON ADAPTER (2)
- SHELL MILL ADAPTER (14)
- SQUARE SHANK ADAPTER (15)
- WHISTLE NOTCH ADAPTER (2)
Clamp Style
Clamp Style
- D (9)
- M (42)
- N (9)
- P (16)
Cutting Width
Cutting Width
- 0.039 in(3)
- 0.047 in(3)
- 0.06 in(3)
- 0.062 in(3)
- 0.069 in(3)
- 0.073 in(3)
- 0.078 in(3)
- 0.079 in(3)
- 0.088 in(3)
- 0.089 in(1)
- 0.094 in(2)
- 0.095 in(3)
- 0.097 in(3)
- 0.098 in(3)
- 0.105 in(3)
- 0.108 in(3)
- 0.11 in(3)
- 0.119 in(5)
- 0.122 in(3)
- 0.125 in(5)
- 0.126 in(5)
- 0.128 in(3)
- 0.131 in(2)
- 0.138 in(5)
- 0.143 in(3)
- 0.156 in(3)
- 0.157 in(5)
- 0.167 in(5)
- 0.169 in(3)
- 0.177 in(5)
- 0.178 in(3)
- 0.185 in(4)
- 0.188 in(5)
- 0.189 in(5)
- 0.192 in(2)
- 0.193 in(2)
- 0.195 in(3)
- 0.196 in(3)
- 0.197 in(4)
- 0.202 in(2)
- 0.213 in(2)
- 0.217 in(2)
- 0.218 in(2)
- 0.219 in(2)
- 0.237 in(4)
- 0.25 in(6)
- 0.256 in(2)
- 0.276 in(2)
- 0.281 in(4)
- 0.312 in(4)
- 0.315 in(1)
- 0.345 in(2)
- 0.354 in(2)
- 0.375 in(4)
- 0.381 in(2)
- 0.384 in(2)
받는 사람
Cutting Width
Cutting Width
- 1.0 mm(3)
- 1.201 mm(3)
- 1.5 mm(3)
- 1.576 mm(3)
- 1.75 mm(3)
- 1.826 mm(3)
- 1.975 mm(3)
- 2.0 mm(3)
- 2.2 mm(3)
- 2.225 mm(3)
- 2.25 mm(1)
- 2.375 mm(2)
- 2.401 mm(3)
- 2.475 mm(3)
- 2.5 mm(3)
- 2.676 mm(3)
- 2.75 mm(3)
- 2.801 mm(3)
- 3.0 mm(5)
- 3.1 mm(3)
- 3.176 mm(5)
- 3.2 mm(5)
- 3.25 mm(3)
- 3.325 mm(2)
- 3.5 mm(5)
- 3.6 mm(3)
- 3.95 mm(3)
- 3.975 mm(2)
- 4.0 mm(5)
- 4.25 mm(5)
- 4.3 mm(3)
- 4.5 mm(5)
- 4.525 mm(3)
- 4.7 mm(4)
- 4.775 mm(5)
- 4.801 mm(5)
- 4.875 mm(2)
- 4.9 mm(2)
- 4.95 mm(3)
- 4.976 mm(3)
- 5.0 mm(4)
- 5.125 mm(2)
- 5.4 mm(2)
- 5.5 mm(2)
- 5.525 mm(2)
- 5.575 mm(2)
- 6.0 mm(4)
- 6.351 mm(6)
- 6.5 mm(2)
- 7.0 mm(2)
- 7.125 mm(4)
- 7.926 mm(4)
- 8.0 mm(1)
- 8.75 mm(2)
- 9.0 mm(2)
- 9.525 mm(4)
- 9.675 mm(2)
- 9.75 mm(2)
받는 사람
Front End Type
Front End Type
- FDA - Milling Cutter Arbor (11)
- KMT - KM Adapter (7)
- MCS - Modular Cartridge System (26)
- SPK-Holding Arbor-Spindle Head (4)
- SZK - Collet Taper (3)
- VKT - Square Shank (15)
- ZYL - Cylindrical Adapter (25)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (25)
- D-DIAMOND/RHOMBIC 55 (19)
- R-ROUND (6)
- S-SQUARE 90 (12)
- TN-TOP NOTCH (9)
- V-DIAMOND/RHOMBIC 35 (3)
- W-TRIGON 80 (2)
Front End Style
Front End Style
- FDA03 Longit &Transver Drive (1)
- FDA12 Transv Drive&CutRetScr (1)
- FDA22 Transv Drive & SHCS (7)
- FDA42TranDrvw/CtrScrwORBoltCir (2)
- KMT00 All KM, except 02,05,09 (7)
- MCS01 Modular Deep Grooving (26)
- SPK02 Bolt Circ Dia 101.6 mm (4)
- SZK02 Collets 8 Degree Taper (3)
- VKT01 Std Design (15)
- ZYL03 Attachment Thread (2)
- ZYL10 Weldon Shank (13)
- ZYL13 2Deg-Whistle Notch (2)
- ZYL22 Boring Bar Shank (5)
- ZYL56 2Plain Clamp Surf w/Pcs (3)
Insert Size
Insert Size
- 3 (3)
- 4 (2)
- 5 (2)
- 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.21 in(2)
- 0.294 in(2)
- 0.299 in(2)
- 0.416 in(2)
- 1.581 in(2)
받는 사람
Maximum Cutting Depth
Maximum Cutting Depth
- 5.325 mm(2)
- 7.476 mm(2)
- 7.601 mm(2)
- 10.55 mm(2)
- 40.151 mm(2)
받는 사람
Gage Length
Gage Length
- 1.102 in(2)
- 1.181 in(4)
- 1.48 in(2)
- 1.496 in(2)
- 1.575 in(3)
- 1.772 in(2)
- 1.846 in(2)
- 1.85 in(6)
- 1.891 in(6)
- 1.901 in(1)
- 1.937 in(2)
- 1.969 in(2)
- 2.165 in(1)
- 2.244 in(4)
- 2.25 in(1)
- 2.283 in(4)
- 2.362 in(3)
- 2.5 in(2)
- 2.559 in(1)
- 2.618 in(2)
- 2.757 in(6)
- 2.953 in(1)
- 3.15 in(2)
- 3.5 in(1)
- 3.543 in(8)
- 3.819 in(1)
- 3.938 in(5)
- 4.134 in(5)
- 4.5 in(2)
- 4.724 in(1)
- 4.921 in(1)
- 5.118 in(1)
- 5.394 in(1)
- 5.5 in(1)
- 5.513 in(1)
- 6.299 in(1)
- 7.362 in(1)
Gage Length
Gage Length
- 90 mm(8)
- 47 mm(6)
- 48 mm(6)
- 70 mm(6)
- 100 mm(5)
- 105 mm(5)
- 30 mm(4)
- 57 mm(4)
- 58 mm(4)
- 40 mm(3)
- 60 mm(3)
- 28 mm(2)
- 38 mm(2)
- 45 mm(2)
- 50 mm(2)
- 80 mm(2)
- 120 mm(1)
- 125 mm(1)
- 130 mm(1)
- 137 mm(1)
- 140 mm(1)
- 160 mm(1)
- 187 mm(1)
- 55 mm(1)
- 65 mm(1)
- 75 mm(1)
- 97 mm(1)
- 37.6 mm(2)
- 46.901 mm(2)
- 48.25 mm(1)
- 49.2 mm(2)
- 57.151 mm(1)
- 63.5 mm(2)
- 66.5 mm(2)
- 88.9 mm(1)
- 114.301 mm(2)
- 139.701 mm(1)
Front End Size
Front End Size
- 0.473 in(1)
- 0.5 in(1)
- 0.625 in(1)
- 0.63 in(1)
- 0.75 in(2)
- 0.787 in(1)
- 0.984 in(2)
- 1.0 in(4)
- 1.063 in(1)
- 1.25 in(4)
- 1.26 in(5)
- 1.5 in(4)
- 1.575 in(5)
- 1.969 in(2)
- 2.0 in(3)
- 2.362 in(1)
- 2.48 in(3)
- 2.5 in(2)
- 3.15 in(2)
받는 사람
Front End Size
Front End Size
- 12.0 mm(1)
- 12.701 mm(1)
- 15.875 mm(1)
- 16.0 mm(1)
- 19.05 mm(2)
- 20.0 mm(1)
- 25.0 mm(2)
- 25.401 mm(4)
- 27.0 mm(1)
- 31.75 mm(4)
- 32.0 mm(5)
- 38.1 mm(4)
- 40.0 mm(5)
- 50.0 mm(2)
- 50.801 mm(3)
- 60.0 mm(1)
- 63.0 mm(3)
- 63.5 mm(2)
- 80.0 mm(2)
받는 사람
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (29)
- B L (29)
- C A (50)
- C N (54)
- D P (30)
- H T (32)
- H W (76)
backEnd
Connection Type
Connection Type
- TAPER SHANK (40)
System Size
System Size
- KM40TS (2)
- KM50TS (4)
- KM63TS (4)
- KM63XMZ (4)
- KM80ATC (4)
- KM80TS (113)
Back-End Diameter
Back-End Diameter
- 40.0 mm(2)
- 50.0 mm(4)
- 63.0 mm(8)
- 80.0 mm(153)
받는 사람
Back-End Diameter
Back-End Diameter
- 1.575 in(2)
- 1.969 in(4)
- 2.48 in(8)
- 3.15 in(153)
받는 사람
No filters matching ""